Purchase of furniture in Karan Stadium at Karnal

Amount

Supplying and placing a modular table with an overall size 1500mm X 750mm X 750mm. The top of the table shall be made of 18mm thick Pre-laminated particle board of grade II of IS 12823 with approved laminate and finish as per approved shade. The profile of the top shall be in rectangle shape and the edges shall be sealed with 2mm thick thin strip of impermeable PVC that is cut to fit the size of board panel with the assistance of edge banding machine at 200 degree celsius. The top shall be supported on MS CRCA powder coated rectangle pipe frame having cross-section area 40mm X 20mm with 1.6mm thick. The table understructure shall be supplied with MS powder coated rectangle pipe having cross-section area 40mm X 20mm. The gable end shall be given at one side made up of 0.8mm thick high yield strength CRCA sheet of grade 'D' confirming to IS:513. Fixed pedestal unit shall be supplied with 3 nos. of drawer i.e. 2 box+1 filing at one side. All the drawer shall be synchronized locked with central locking mechanism by one single key. The drawer shall be operated with ABS plastic recessed handle. The manufacturer shall have basic quality and safety certifications like ISO-9001:2015, ISO-14001: 2015, ISO- 18001:2007, BIFMA Membership & AIOTA certification. The board used should meet International Standard of quality, Indian standard IS 12823 grade II should meet long time load bending, screw-withdrawal strength, modulus of rupture and modulus of elasticity bending tested as per IS 2380.

Supplying and placing three seater sofa that shall be constructed from natural hard wood and commercial plywood having inner frame. The thickness of the wood should allow for the heavy tension webbing. The sofa shall have spring attached and also be padded separately. The frame shall be padded with high resilience polyurethane foam having density 40Kg/m³ in seat and having density 32Kg/m³ in back. There shall be cushion arm provided padded with high resilience polyurethane foam thick having density 32Kg/m³. SS strip shall be provided on front of the arm having length 515mm with cross-section area 14mm X 4mm. The structure shall be upholstered with leatherite tapestry 0.8±0.1 mm thick and 535 GSM. The understructure shall have shiny chrome finish SS leg with height 100mm and 10mm thick. There shall be shoe provided at the bottom to avoid scratches on the floor. The seat size shall be 500±10 mm(D) X 1480±10 mm(W), seat height = 430±10 mm, overall width = 1625±10 mm, overall depth = 750±10 mm & overall height = 700±10 mm.

Providing, supplying and placing steel almirah in perfectly upright and straight position. The overall size of the Almirah shall be 915mm (W) X 485mm (D) X 1980mm (H) including legs. It should be supplied with 4 nos. of adjustable shelves i.e. 5 loading compartments. Door shall be made of 1mm thick and all other components shall be made of 0.8mm thick high yield strength CRCA sheet of grade ‘D’ confirming to IS: 513. Stiffeners shall be provided in shelf & door. The steel hinged door shall be provided with locking mechanism which is assembled with bolt arrangement. The shelves shall have folded constructions which have intrinsic rigidity and high load carrying capacity. Uniformly distributed load capacity per each shelf shall be 40kg maximum. The complete steel structure shall be constructed by welding and provide finishing with epoxy polyester powder coated to be thickness 50-60µ.

Providing and supplying plastic shell chair with arms. The seat, back and legs shall be made up of injection moulded high impact strength polypropylene polymer. There shall be cushion seat with leatherite tapestry. Plastic show shall be provided at the bottom to avoid scratches on the floor.

Supplying & Placing Visitor Chair. The seat and back shall be made of 15mm and 12mm thick hot pressed commercial plywood padded with high resilience polyurethane foam 40mm thick having density 40kg/m³ in seat 25mm thick having density 32kg/m³ in back. The same shall be upholstered with fabric tapestry 1mm thick and 300 GSM. The frame structure shall be fixed cantilever supported type made up of MS/CRCA chrome plated round pipe of dia. 13mm with 1.6mm thick. There shall be PPCP shoe provided at the base to avoid scratches on the floor. The seat size shall be 455±10 mm(D) X 435±10 mm(W) and back size shall be 450±10 mm(W) X 390±10 mm(H) from seat. Overall height shall be = 820±10 mm, overall depth = 530±10 mm.

Supplying and placing Green guard certified mid back chair with ergonomic design. The seat and back shall be made of 15mm thick hot pressed commercial plywood and plastic inner respectively padded with high resilience moulded polyurethane foam 40mm thick having density 40kg/m³ in seat and 25mm thick having density 32Kg/m³ in back. The same shall be upholsted with fabric tapestry 1mm thick and 300GSM. The back and base of the chair shall be supplied with injection moulded PP/ABS cover. The seat and back shall be arrested together with 50-60µ dry film thick powder coated HR steel spine covered with plastic bellow. The armrest shall be used one piece injection moulded polypropylene arm completely joint with seat. For seating durability the chair shall have synchro tilt 360 degree revolving mechanism with upright position locking and tilt tension adjustment. The pneumatic seat height adjustment for healthy seating, user can adjust seat height up to 100mm with BIFMA standard class-3 gas- lift to suit them using the lever under the seat. The gas-lift mechanism should be tested as per ANSI/BIFMA X5.1- 2011 standard. The pedestal should have five legged injection moulded in 30% glass filled black nylon having pitch circle dia. 650 mm fitted with 5 nos. twin wheel castor. The castor of the chair should be injection moulded in black nylon 30% glass filled, confirming to ANSI/BIFA X5.1-2011 tested to perform 98,000 cycles with 250lbs load. The seat size shall be 465±10 mm (D) X 480±10 mm (W) and back size shall be 435±10 mm (W) X 560±10 mm (Ht) from seat. Overall height shall be = 1025±10 mm, overall width = 615±10 mm.

Tiger Synergies Private Limited