Addition/ Alteration of Bldg No. P 2 and cook house (Bldg No. 10 A) of Inf Bde Camp under GE (East) Ferozepur Cantt

Amount

B/R Works Demolition of brick work or stone/boulder masonary built in cement mortor including all quoins,arches,pillars etc, complete all as complete all as specified and directed

M&L for excavation in trenches n. exc 1.5m wide and n. exc 1.5m in depth for fdn n. exc 10 sqm on plain and n. exc 1.5m in depth and getting out soft/loose solil complete

M&L for returning, filling in inluding spreading, levelling, watering and well ramming in layers n. exc 25cm complete

Removing of excavated materials (soil) n.exc 50m and deposited where directed at a level n exc 1.5m above the starting point.

M&L brick work with sub class 'B' bricks, straight or curved on plan exceeding 6m mean radius built in CM (1:6) complete all as specified and directed

Demolition of brick work built in cement mortar of any specification and in any position and using old bricks in cement mortar 1:6 using sub class ‘B’ old size bricks, straight or curved on plan exceeding 6 metre mean radius retrieved from dismentling including cleaning and removal of mortar from old bricks.

M&L for Rendering/plastering, 10mm thick in cement mortar (1:6) on any face of brick walls or concrete surfaces, finished even and smooth (without using extra cement) including Preparation of new plastered surfaces wall and applying two coats of Oil bound distember over a coat of primer complete all as specified.

M&L for 15mm thick rendering in cement mortar (1:4) on any face of brick walls or concrete surfaces, finished even and fair (without using extra cement) including Preparation of new plastered surfaces and applying two coats of cement base paint over a coat of chalk white primer complete all as specified.

M&L for 15mm thick rendering in cement mortar (1:4) on any face of brick walls or concrete surfaces, finished even and fair (without using extra cement) including taking down cement plaster from brick walls of any description, racking out joints, hacking for key, scrubbing down with water & Preparation of new plastered surfaces and applying two coats of cement base paint over a coat of chalk white primer complete all as specified.

S/F of Glazed coloured and cereamic tiles in vertical surfaces 300 x 600 x 6-7 mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match over backing coat 10mm thick in cement mortar 1:4 for laying skirting dados and vertical surfaces including dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles and rubbish off the premises all as specified and directed

M & L for non skid coloured ceramic tiles of 7 to 8 mm thick , area of each tile exceeding 0.11 sq m but not exceeding 0.18Sq m in floors set and jointed in neat cement slurry and pointed in white cement mixed with colour pigment to match over a screed layer of 15 mm thick in CM 1:6 including dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles and rubbish off the premises complete all as specified and as directed.

S&F light shade Vitrified ceramic tiles 9-10mm thick (Square/rectangular) polished area of each tiles n.exc 0.36 Sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured (Light Shade)cement to match over 20 mm thick screed bed or bedding layer of cement mortar(1:6) for laying floor finishes including dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles and rubbish off the premises.

M&L for light shade Vitrified tile 9-10 mm thick polished, area of tile n exc.0.36 sqm as in Skirting set and jointed in cement slurry over and including 10mm thick backing coat in cement mortar (1:4) and pointed in white cement with pigment to match the colour of tiles including dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles and rubbish off the premises complete all as specified.

Taking down shutters of any description and refixing in the same opening exc 1 sqm and not exc 2 sqm each complete all as specified and directed.

Taking down wooden chowkhats or frames with shutters (without taking off shutters from the frames) of size not exceeding 1.50 Sqm each including cutting holes in brick walls of appropriate size for insertion of cement concrete blocks for hold fasts complete all as specified and directed.

All as per item No 15 herein before but size exceeding 1.5 Sqm and not exceeding 4 Sqm each.

Taking down Shutters of any description exc 1 sq. m and n exc 2 sq. m each

Solid PVC door frame of size 50 mm x 47 mm made of 5 mm plain colour PVC sheet reinforced with mild steel square tube complete all as specified in clause 8B.3.1 and shown on page 150 of MES Schedule Part-II (2020).

Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of MS tubes for top & bottom rails, MS frame covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20 mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; paneling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading and jointed together with solvent cement, supply and fixing in the frame at site as per clause 8 B.2.1 of MES schedule Part-II (2004) complete all as specified. Make: Rajshri or equivalent as approved.

PTMT tower bolts, 150 mm long and fixed with steel screws complete all as specified.

PTMT butt hinge, 100mm long, fixed with steel screws with brass/bronze hinge pin complete all as specified.

PTMT handle 125mm long fixed with steel screws complete all as specified.

S & F Pressed steel frames made of 1.25mm thick MS sheet of profile 105x60mm for door and window frames with one rebate including lock strike plate, shock absorber, 20mm dia 60mm long MS conduit for housing of a drop bolt, treating of internal surfaces of chowkhats with coal tar or black paint including hinges, hold fasts/lugs etc complete all as specified.

All as per item 23, above here-in-before but size 125x60mm with double rebate.

M&L Cement concrete (1:2:4), type B-1 using 20mm graded stone aggregate as in in lintels upto 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, kerbs, chowkats, water troughs and the like including weathering, slightly rounded or chamfered angles and throating, as directed necessary form work complete all as specified.

S&F 30mm thick second class hard wood plain framed panelled shutters (any number of panels ), with panels of timber flat on both sides (feather edge), or of veneered particle board medium density wood wood particle board with commericial face veneers and fitted to chowkats.

S&F 30mm thick second class hard wood glazed and skelton shutters,open rebated and prepared to receive glass gauze,etc (without sash bars),edges of framing plain chamfered or rounded fitted with cut and mitred beads for securing glass etc sizes of members of shutters as specified in SSR part-I section 8 clause 8.24(a) fitted to chowkat.

S&F 150mm long aluminium, anodised barrel tower bolts of extruded section, all as specified and as directed by the Engr-in-charge.

S&F 100mm Extruded aluminium alloy handle all as specified and as directed.

S&F for 125mm butt hinges, medium weight, cold rolled mild steel, and fixed all as specified and as directed.

S&F Aluminium alloy, anodised, sliding door bolt 250mm length,with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed all as specified.

S&F 3mm thick, plain sheet glass ordinary quality and glazing, with oil putty or with wooden beads (supplied alongwith shutters), in squares n.exc 0.50 Sqm complete all as specified.

S & F Galvanised mild steel wire cloth 0.56 mm nominal dia of wire and average width of aperture not more than 1.18mm and fixed with tinned tacks or galvanized wire staples complete all as specified

S & F Factory made double rebate box type side hung steel window with pintal hinges & 2 Nos 150 mm mild steel tower bolts to each shutter, steel handle, with & Without glazing bars, one side wiremesh shutter without glazing bar & other side glass shutter with glazing bar including 6mm mild steel guard bars dovetailed or welded and with one shop coat of zinc chromate primer complete all as specified and shown on Drawing No CEJZ/TD-06/07 & CEJZ/TD-07/07. Note : Wiremesh and glass will be measured seperately

M&L Preparation of new steel surfaces of any description, over 10cm width or girth and applying two coats of synthetic enamel paint complete all as specified and directed

M&L for preparation of new steel surfaces of any description over 10 cm width or girth not other wise described and applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer complete all as specified.

M&L Preparation of new wooden or wood based surfaces of any description, over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified.

S&F for anodised aluminium frame for doors, windows, ventilators and patations with one or more rebates including joining cleat for fixing etc. complete all as specified

S&F for 10mm thick toughned glass as in hinged doors, partitions automatic doors and similar work including cutting to shape, drilling holes required complete all as specified and directed.

S&F for 30cm length stainless steel glass pipe pull door handle for glass door incl necessary fittings complete all as specified and directed.

M&L for double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed in repairs complete all as specified.

S&F for anodised aluminium door shutters, aluminium section weighing 0.55 kg/ m including necessary joining cleats, glazing clips, ruber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminum snap beading screws etc. complete all as specified

S&F 4.8mm thick, plain sheet glass ordinary quality and glazing, with oil putty or with wooden beads (supplied alongwith shutters), in squares n.exc 0.50 Sqm complete all as specified.

S&F 4.8mm thick, plain sheet glass ordinary quality and glazing, with oil putty or with wooden beads (supplied alongwith shutters), in squares exc 0.50 Sqm complete all as specified.

S&F Hasp and staple of aluminium anodized, safety type, 100mm long, fixed with screws complete all as specified.

S & F in repair 14-16 mm Solid PVC board plain colour ,fixed with screws or adhesive with complete accessaries as in shutters & shelves including dismantling of boarding, any description complete all as spd and directed by Engineer in charge. Make : Rajshree, Echon or equallent as approved by GE

S&F for Continuous (piano) hinges, mild steel bright finish or electro galvanised with flap (when open) 40 mm, fixed with steel screws complete all as specified.

Excavating in post holes(or similer holes)each n exc 0.5 cum getting out,returning filling in and raming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm watering and removing surplus soil to a distance n exc 50m and making good surface all as specified.

Surface excavation n. exc 30cm depth and averaging 15cm deep getting out in soft/loose soil.

Materials and labour for broken stone or boulder hard core of gauge n.exc, 63mm deposited spread and leveled in layers n.exc 15cm thick watered and rammed to a true surface complete all as specified and directed.

M&L for cement concrete type C-2, 1:3:6 using 40mm graded stone aggergate as in foundations filling and mass concrete complete all as specified.

M&L for Sand filling under floors or in foundation including watering and consolidation complete all as specified.

M&L for Machine pressed precast concrete interlocking paver block any shape and size, any colour confirming to IS 15658 -2006 of 60mm thickness, M-35 Grade with grey cement & pigment complete all as specified and directed by Engineer-in-charge.

S&F Framed mild steel work of grade E-165 (Fe-290) as in framed work such as doors, gates or frame for cooler stand with gusset plates, rails, braces etc, drilled for fixing of sheeting or other covering of door etc, to be prepared for hanging or sliding etc including either hooks and hinges or steel hanging door fittings and hanging and fixing complete all as specified and directed

S&F for mild steel work of grade E-165 (Fe-290) as in roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc complete all as specified and directed

M&L for Pre painted galvalume aluminium Zinc coating GI based corrugated steel sheet 0.5mm thick of an colour having tensile strength of 550 Mpa as in roof covering /cladding to wall fixed with self tapping screws complete all as specified and directed.

S & F Hollow PVC wall lining consisting of 5mm thick single side prelam PVC sheet instead of plain colour sheet inclusive of solvent cement and fixing on PVC frame as per specified in MES schedule part-I & II complete all as specified and directed by Engineer in Charge .

Demolition of stone slabs and tiles laid, bedded and pointed in any mortar in of any description or thickness in floors, aprons etc complete all as specified and directed.

M & L for 16-20mm thick granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, win dow-cills, cooking plat forms, floor and like in cement mortar (1:4) including point ing in white cement (1:2) us ing marble dust with admix ture of pigment to match with shade of granite complete all as specified.

S & F in rep of Gypsum Board 8 mm thick in ceiling fixed with screw 60x60cm placed in ceiling (Angle 25mm X 25mm , Main tee 38mmX23mm ,Sub tee 23mmX23mm) incl aluminium anodised/powder coated snap grid frame 605X605 mm for false ceiling incl hanging arrangement hangers 6 mm dia. G.I. (upto 1200mm length) adjusting level fixed to roof slabs by means of ceilling cleats made out of G.I. flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5mm dia. 40mm long complete all as specified

S&F galvanised steel water tubes 15 mm bore medium grade, with all fittings and fixed complete to walls and ceiling or laid in floors including taking down corroded GI pipe complete all as specified and as directed by Engr-in-Charge.

S&F galvanised steel water tubes 20 mm bore medium grade, with all fittings and fixed complete to walls and ceiling or laid in floors including taking down corroded GI pipe complete all as specified and as directed by Engr-in-Charge.

S&F in repair 15mm bore stop valves of cast copper alloy (concealed type), screwed down, high pressure with crutch or butter fly handle, fancy type, chromium plated, with long shank and cup complete all as specified. (Make: Jaquar/Cera/Prayag)

S&F in repair 15mm bore angle valve CP of cast copper alloy, screwed down, high pressure with crutch or butter fly handle, fancy type, chromium plated, with long shank and cup complete all as specified. (Make: Jaquar/Cera/Prayag)

S&F in repair stainless steel 24'' double towel rail, type meridian (SS 304), Make- Cera, Cat No - F5015113CH or equivalent, incl with necessary screw fittings complete all as specified.

S&F for stainless steel soap dish, type meridian (SS 304), Make- Cera, Cat No - F5015106CH or equivalent, incl with necessary screw fittings complete all as specified.

S&F in repair stainless steel paper holder with flap guard, type ormond range (SS 304), Make- Cera, Cat No - F5003110 or equivalent, incl with necessary screw fittings complete all as specified.

S&F brass glass shelf, type oakley range, Make- Cera, Cat No - F5001114 or equivalent, incl with necessary screw fittings complete all as specified.

S&F in repair CP Bib tap, 15mm bore, screwed down, screwed for iron pipe or for brass ferrule complete all as specified. (Make: Jaquar/Cera/Prayag)

S&F in repair 15mm bore sonic series pillar tap, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered ‘Hot’ or ‘Cold’ with long screwed shanks and fly-nuts, screwed for iron pipe, complete all as specified.

S&F in repair Rotational moulded Polyethylene water storage tank of 500 litres capacity (cylindrical vertical with closed top) hoisted and fixed in position including 20mm PVC float valve high pressure with polythene float valve & taking down old PVC water tank complete all as specified and as directed

S&F in repair Vitreous china wash down water closet pan (pedestal pattern)white/coloured cascade type 675X360X755MM (monolithic flush cistern type) Make: Cera NO:CHILE 3D WHT, Cat No: S1013176 and equivalent single picece wc with slim soft close seat cover ,Hinges fixing accessories set including flush cistern with S-Trap of size 285mm all as per manufacturing instructions and all as specified and directed.

S&F Table top Wash hand basin, of size 550x400x160mm vitreous china (white), CAMPA type, Ivory coloured, cat No - S2020102 including waste fittings and waste pipe, of required size as directed & making good disturbed surfaces to match with the existing as in repair complete all as specified.

S&F in repair Health faucet (Cera model No: F8030111AB/ Parryware T9804A1 Agate with Hose & Hook/ or equivalent) (ABS Body) with 8mm dia 1.00 m long easy flexible tube chormium coated finish and wall hook all as specified and directed by Engineer-in-Charge.

S & F in repair CP wall mixer 15mm bore mixing and hot and cold water scrwed down for iron pipe and fixed. and waste system with 450mm long braided hoses Complete all as specified and directed by Engineer in Charge. (Make: Jaquar/Cera/Prayag)

S&F Mild steel curtain rod chromium plated with fixing side brackets, end cups and fixed with PVC rawl plugs & steel screws as in repairs complete all as specified.

M & L for non skid coloured ceramic endura tiles heavy duty for outdoor 7 to 8 mm thick , area of each tile exceeding 0.06 sq m but not exceeding 0.11Sq m in floors set and jointed in neat cement slurry and pointed in white or coloured cement to match over include 15 mm thick cement screed in CM 1:6 including dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles and rubbish off the premises complete all as specified and as directed.

Providing precast cement concrete type B0 using 12.5 grade aggregates as in louvres and jallies, 25mm thick Set in cement mortar 1:4 (mea sured solid), in cluding all mould- ings but excluding frame complete all as specified and directed. Note:- Provided height of concrete jallies 30CM

M&L for preparation of old plastered surfaces of walls and applying one coat of white wash on walls including cornices, pillasters etc complete all as specified and directed

M&L for preparation of old plastered surfaces of walls and applying one coat of oil bound distemper complete all as specified.

M&L for preparation of old plastered surfaces of walls and applying one coat of cement base paint complete all as specified.

Preparation of old decorated surfaces of ceiling including cornices plasters etc and applying one coats of white lime wash(white washing) including washing rubbing & scraping down complete all as specified

Preparation of old wooden surfaces over 10cm width or girth and applying one coat of synthetic enemel paint all as spd.

Preparation of old steel suraces and applying one coat of synthetic enemel paint over 10cm width or girth.all as spd.

M&L for preparation of wall surface with 2 mm thick wall care putty for patch work of interior on wall surfaces over priming coat and two coats of oil bound distemper finished smooth and even Complete all as specified and directed by Engineer in Charge

M&L for PCC 1:3:6 type C2 using 40mm graded aggregate in foundations, filling and mass concrete complete all as specified and directed

Taking down cement plaster on brick walls of any description & rendering 10 mm thick in cement mortar (1:6) on any face of brick walls or concrete surfaces, finished eben and smooth without using extra cement and applying two coats of OBD over priming coat incl preparation of new surfaces on walls complete all as specified and directed

Demolition of Concrete in ground floors and pavings n exc 15 cm thickness (below or above ground level) complete all as specified and directed

M&L for 75mm thick cement concrete type B-1, 1:2:4 using 20mm graded aggregate in sub base in floors complete all as specified and directed.

M & L for non skid coloured ceramic tiles of 7 to 8 mm thick , area of each tile exceeding 0.18 sq m but not exceeding 0.38Sq m in floors set and jointed in neat cement slurry and pointed in white cement mixed with colour pigment to match over a screed bed of 15 mm thick in CM 1:6 complete all as specified and as directed.

M & L for non skid coloured ceramic tiles of 7 to 8 mm thick , area of each tile exceeding 0.11 sq m but not exceeding 0.18Sq m in floors set and jointed in neat cement slurry and pointed in white cement mixed with colour pigment to match over a screed bed of 15 mm thick in CM 1:6 complete all as specified and as directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises

S/F of Glazed coloured and cereamic tiles in vertical surfaces 300 x 450 x 6-7 mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match over backing coat 10mm thick in cement mortar 1:4 for laying skirting dados and vertical surfaces all as specified and directed

M&L for 16-20mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, win dow-cills, cooking plat forms and like in cement mortar (1:4) including point ing in white cement (1:2) us ing marble dust with admix ture of pigment to match with shade of granite incl demolition of Stone slabs and tiles of any description or thickness in floors, aprons etc complete all as specified.

S&F for almn (die cost) body door closer hydraulically regulated, designation No. 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed

S&Fstainless steel wire cloth 0.56 mm nominal dia of wire and average width of aperture not more than 1.18 mm and fixed with stainless steel wire staples complete all as specified and directed

S&F galvanised steel water tubes 15 mm bore medium grade, with all fittings and fixed complete to walls and ceiling or laid in floors complete all as specified and as directed by Engr-in-Charge.

M&L for 100mm thick cement concrete type B- 2, 1:2:4 using 40mm graded aggregate in sub bases in floors, hardstanding complete all as specified and directed.

S&F in repair CP Bib tap, 15mm bore, screwed down, screwed for iron pipe or for brass ferrule complete all as specified.

(E/M) Works Taking down carefully existig copper / alumn point wiring for light / fan / bell / socket 5/15 Amp points complete with fitting and fixtures such as switches, sockets, c/ rosess, holders and bracket fittings with battens / conduits / wires,T/L fittings and making good the disturbed surfaces of walls and roofs etc.and to match with existing colour complete all as specified and directed.

Taking down carefully unserviceable main switches and distribution boards with fuses/ MCB's (single phase or three phase) of any capacity all as specified and directed.

Taking down carefully old unserviceable sub main wiring including meters and making good disturbed surfaces and matching with existing complete all as directed and specified

S&F Point wiring complete with 1100 volts grade PVC FRLS insulated unsheathed cable of copper conductor, multi stranded of size 1.5 Sqmm, single core, drawn through & including PVC rigid concealed conduit, medium grade of suitable size (not less than 20mm dia) duly ISI marked with all accessories such as bends, reducers, spacers, saddles, junction boxes, bakelite sheets, sizes for mounting switch/sockets, fan regulators etc complete with and including continuous earth wire of size 1.5 Sqmm, single core, PVC FRLS copper conductor, insulated, unsheathed,stranded (Green colour) connected to common earth dolly complete all as specified for following : (a) One light/fan/bell/Bldg security light point controlled by one single pole one way switch.

(b) One 3 pin 5 Amp socket outlet point controlled by one switch on Independent board.

(c) One 3 pin 5 Amp socket outlet point controlled by one switch on same board.

All as per item No. 104 here-in-before but one 15 Amps socket outlet point controlled by one single pole switch one way and wiring with 2.5 Sqmm PVC FRLS insulated,stranded,unsheated copper conductor on independednt board with continuous earth wire of size 2.5 Sqmm green colours PVC insulated, unsheathed,stranded copper conductor cable.

All as per item No. 104 as above here-in-before but wiring with 4 sqmm copper cable and 4 Sqmm copper cable FRLS as continuous earth wire for one 6 pin 6/16 Amps socket out let on independent board complete all as specified and directed.

Supply & Fixing of switch piano flush button single pole one-way 5 Ampere complete all as specified and directed.

Supply and fixing of switch piano flush button single pole one-way 15 Ampere complete all as specified and directed.

Supply and fixing of socket outlet two-in-one, 3 pin each suitable for 5 and 15 Amperes flush type, 250 volts AC complete all as specified and directed.

S&F Ceiling rose surface type, 240 volts, 50 Hz, 6A, Pilot 3 plate, white in colour, bakelite 65 x 50mm, 3 terminals duly ISI marked complete all as specified and directed. Make- Anchor/ Cona/ Plaza.

S&F batten holder (with metal ring), 240 volts, 50 Hz, 6A, white in colour, duly ISI marked complete all as specified and directed. Make- Anchor/ Cona/ Plaza.

Supply and fixing LED light fitting 1 x 20 Watt, 220V, LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete.

S&F LED bulb of 9/10 watts B-22 CDL 3 star 6500K, complete all as specified.

S&F Factory made single phase and neutral Sheet Steel made out of CRCA 1.2 mm thick, powder coated double door vertical distribution board 8 way, dust and vermin proof, fitted with two cover, one screwed cover for incoming and outgoing MCBs and the second for protection of MCBs fitted with colour bus bar of capacity 200 Amps, neutral link, earth bar and din rail. suitable for use on 240V, 50Hz supply, partly immersed in wall and making good distrubbed surfaces with matching colour, complete all as specified.

S&F MCB SPN, 40A - 63Amps, 240 volts, "C" series, 10KA duly ISI marked, in MCB DB, complete with connection testing and commissioning all as specified.

S&F MCB SP, 6A-32 Amps, 240 volts, "B" series, 10KA duly ISI marked, in the MCB DB, complete with connection testing and commissioning all as specified.

M&L for Sub main wiring with two single core 2x6 sqmm FRLS insulated and unsheathed stranded copper conductor alongwith earth wire 6.0 sqmm drawn in FRLS rigid conduit connected to main board complete all as specified and directed (Two runs cable and one number earth wire and suitable FRLS conduit shall measured together as unit length).

S&F exhaust fan heavy duty with louvers complete of sweep size 300mm, 900 RPM, single phase, with bolts, nuts and washers, size of the bolt 15 cm long 12mm dia embedded in the wall including provision of PVC flexible copper cable of size 23/00.0076 three core from ceiling rose to exhaust fan max 1.5 mtr for giving connection complete all as specified.

Cutting holes making good the distributed surface, grouting nuts for fixing of Exhaust fans complete all as specified and directed.

S&F Modular Switch one way, 1 module, 10 Amp, Single pole, 240 volts complete all as specified and directed.

S&F Modular Switch one way, 1 module, 16 Amp, Single pole, 240 volts complete all as specified and directed.

S&F Modular Socket outlet 6 Amps, 2/3 pin combined, 2 module, multipupose complete all as specified and directed.

S&F Modular Socket outlet 6/ 16 Amps, 2/3 pin combined, 2 module, multipupose complete all as specified and directed.

S&F Modular ceiling fan regulator electronic stepped type heavy duty 120W, 250 volts flush type complete all as specified and directed.

Supply and fixing in repair LED luminaire 600 mm x 600 mm, 35/36 watt, 220 V AC recessed type with highefficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cases of suitable size complete.

Supply and fixing post top lantern LED type 20 watt 230 watt volts AC outdoor type with decorative post top for 360 degree indirect light IP 65 protection with impact and corrosion resistant complete with driver and lamp complete.

Kissan contractor and engg works (BID ID -3152918)

Bhupindra Traders (BID ID -3153302)

RAKESH KUMAR SATISH KUMAR (BID ID -3152964)

M/s Sudarshan Enterprises (BID ID -3153328)

M/s Sarup Singh (BID ID -3152875)

M/s Bansi Lal (BID ID -3152838)

Vee Vee Enterprises (BID ID -3153218)