SPECIAL REPAIR OF MES INSTALLATION BLDG NO. P52 PUMP HOUSE NO. 14, SECURITY WALL OF 264 COY ASC FENCING OF APPRO X 150 RM NEAR BLDG P1 RA LINE OF 137 CETF BN TA 39 GR PROVN OF BOUNDARY WALL AROUND SRI BUILDING AT NEW CANTT PRAYAGRAJ

Amount

Complete removal of old existing plastered surfaces of wall including cornices etc. by brooming down or steel wire brushing, scrapping down smoke soot, moulds, moss and efflorescent salt and trading oil and greasy spots and finish the entire surface as new by applying one coat of 1mm thick wall care birla putty and apply premium acrylic smooth exterior paint with silicon additives of approved shade @ 1.43 Ltr / 10 Sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 Sqm complete all as specified and directed.

M&L for 75 mm thick cement concrete 1:3:6 type B2 using 20 mm graded stone aggregate in plinth protection finished even and fair including necessary form work and cutting of joints using extra cement etc complete all as specified.

S & F in repair for 125 mm size fancy type chromium plated shower rose with swivel joints, and connecting rod including fixing to steel pipe or union complete all as specified and directed.

S&F shower arm 15 mm size, 195mm long with bend of 45degree with flange of PTMT any colour (minimum weight 40gms) completes all as specified and directed.

S&F in repair vitreous china wash and basin, white, flat back, size 550 mm x 400 mm fixed on MS bracket including cutting for and pinning in ends of brackets or erecting stand but exclusive of fixing of supply and waste pipe, waste fitting, pipe & union complete all as specified and directed.

S & F waste coupling 32 mm dia full thread of PTMT (half or full threaded) (minimum weight 32mm- 45gms/40mm-60gms ) for WHB complete all as specified and directed.

S&F for bottle trap (with internal partition ) 32mm size with 300 mm & 190 mm long wall connection pipes & wall flanges complete all as specified and directed. Make :Jaquar Cat part ALD-CHR-769L300X190 or equivalent make as specified in P.S.

S&F Brass CP mixer for mixing hot & cold water screwed down for iron pipe and fixed for 15mm bore complete all as specified and directed.

S&F pillar tap, cast copper alloy, fancy type, chromium plated, screwed down high pressure, with or without lettered ‘Hot’ or ‘Cold’ with long screwed shanks and fly nuts, screwed for iron pipe 15 mm bore complete all as specified and directed. Make: Jaguar Cat Part No. OPP-CHR-15053PM or equivalent make as specified in P.S.

S&F in repair brass CP towel ring 20cm dia, fancy type, superior quality, fixed with screws complete all as specified and directed. Make: Jaguar Cat Part No. ACN- CHR-1195N or equivalent make as specified in P.S.

S & F in repair vitreous China white wash down water closet pan (pedestal pattern) including fixing bolts, plastic water closet white. seat cover closed pattern with flat bottom (white colour) and cover and mild steel chromium plated or aluminium hinging device complete all as specified and directed.

S&F in repair PVC flushing cistern 10 ltr capacity valve less syphonic action type low level with and including ball valve float & handle, waste pipe & brackets complete set all as specified and directed.

S&F in repair two way angle valve with wall flange 15mm bore, fancy type, quarter turn, brass chromium plated, long body with capstan head and cup screwed down, screwed for iron pipe or for brass ferrule including accessories complete all as specified and directed. Make: Jaguar Cat Part No.KUP-CHR-35041PM or equivalent make as specified in P.S.

S&F in repair brass CP toilet paper holder , complete all as specified and as directed. Make:-Jaguar Cat Part No.AQN- CHR- 7753 or equivalent make as specified in P.S.

S&F in repair 15 mm bore bib taps, fancy type brass chromium plated with screwed down, screwed for iron pipe or for brass ferrule including all accessories complete all as specified and directed.

S&F waste coupling 40 mm dia full thread of PTMT (half or full threaded) (minimum weight 32mm- 45gms/40mm-60gms ) for WHB complete all as specified and directed.

S&F PVC connection 600 mm long, 15 mm size with PTMT nuts complete all as specified & directed.

S&F for 18 mm thick 100% Solid PVC laminated board of required size comprising of virgin PVC resin of K Valve 57-60 (Suspension Grade), Calcium Carbonate and natural fibers ( Wood powders/rice husk/Wheat husk) and non toxic additives, made from Extrusion process WPC foam sheet Single extruded (Inner) with having minimum density not less than 650 kg/cbm having good screw holding capacity (Screw withdrawal strength of 2000 N (Face) & 1100 N (Edge), minimum Compressive of 50 N/mm2, Modulus of elasticity 850 N/mm2 and resistance of spread of flame of Class A category with property of being termite / Borer Free, water / moisture proof and Fire Retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted on both faces for shutter complete all as specified and directed. Note : Material test certificate and authentication should be provided by the manufacturing company.

S&F 30mm width of flaps continuous (piano) hinges, mild steel, bright finish or electro galvanised complete all as specified.

S&F 100 mm hasp & staple safety type of aluminium anodized including bolt to hinges plate and fixed with screws complete all as specified and directed.

S&F 150mm long anodised aluminium handles, fabricated type complete all as specified and directed.

S&F factory made uPVC white colour sliding window Three track made of extruded profiles with wall thickness of 2.3mm (+/ - 0.2 mm), window profile with hollow section with multi chamber. Frame of size 88mm x 52mm, sliding sash of size 42mm x 67mm, sliding mesh Sash of size 42mm x 57mm, sliding interlock (One vertical length in each shutters) of size 45.5mm x 28mm, Glazing bead 24.5mm x 16mm will be miterd cut and fusion welded at all corners, including drilling of holes for fixing hardware and drainage of water etc., making arrangement for fixing of hardware. EPDM gasket, 1.2 +/ - 0.2mm thick galvanised steel Frame of size 30mm x 18mm, 2 nos, sliding sash 30mm x 18mm, sliding mesh sash 26 mm x 10mm profile to be inserted in required profile, frame will be fixed to the wall with 8mm x 100mm long fasteners, Hardware [Touch Lock of zinc alloyed (white powder coated), steel roller system. stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40mm and required accessories complete all as specified and directed. Note: (i) The unit rate quoted by contractor shall be deemed to include all other connected accessories. (ii) Area of glass shall be measured & paid separately under relevant item. (iii) Net Opening will be measured lor payment purpose.

S&F 4.8 mm thick sheet glass ordinary quality in square n.exc 0.5 Sqm in each pane for new ventilator / window shutter complete all as specified and directed.

M & L for 18 to 20 mm thick granite (of any type) work (table rubbed and polished) including the screed bed in steps, jambs, pillars, window cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite over & including 15 mm thick screed bed in cement mortar 1:6 complete all as specified and directed.

S&F factory made solid PVC door frame of size 50 mm x 47 mm made out of 5 mm plain colour PVC sheet reinforced with MS square tube with wooden grain printed PVC sheet used inserted of plain colour PVC sheet & edges will be painted to match with printed sheet complete all as specified and directed.

S&F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, supplying & fixing in the frame at site as per specification & drawing complete all as specified and directed.

S&F powder coated aluminium anodised grills of bar size 6mm x 5 mm with square gap of size 75mm fixed with suitable aluminium channel of size 12-15 mm section complete all as specified and directed .

M&L for wall cladding tiles sizes 300 mm x 600 mm x 7-8 mm thick designer type coloured for wall etc set & jointed in cement and pointed in coloured cement to match the shade of tile and over 15 mm thick rendering in CM 1:4 on brick work or concrete surface on wall and finished the even and fair to receive tiles complete all as specified and directed.

S&F in repair aluminium composite panel sheet 3 mm thick PVDF fixed with necessary frame work of aluminium tube with required silicon & screw as in ceiling /columns and in vertical surface complete all as specified and directed.

Complete removal of existing treatment on wall of old decorated surfaces by scrapping tools/electric hand grinder and applying 1mm thick wall care putty, after dry the layer of putty, apply two coats of oil bound distemper white or tinted with paint sprayer machine over a coat of primer complete all as specified and directed.

M&L for rendering 15mm thick in CM 1:6 on fair faces of brick work or concrete surfaces finished even and smooth without using extra cement complete all as specified and directed.

M&L for rendering 15mm thick in CM 1:4 on fair faces of brick work or concrete surfaces finished even and fair complete all as specified and directed.

M&L for rendering 10mm thick in CM 1:3 on ceiling surfaces of RCC or brick complete all as specified and directed.

M&L for preparation of new plastered surface of wall and applying two coats of oil bound distemper over a coat of primer over & including 1 mm thick wall care putty complete all as specified and directed.

M&L for preparation of newly plastered surface and applying two coat of apex weather proof external paint on wall or facia etc over & including a coat of primer complete all as specified and directed.

M&L for preparation of newly plaster surface of ceiling and applying two coats of white wash complete all as specified and directed.

S&F 100 mm long stainless steel butt hinges with steel pin complete all as specified and directed.

S&F 200mm long anodised aluminium barrel tower bolt of extruded section complete all as specified and directed.

S&F 150mm long anodised aluminium handles, fabricated type complete all as specified and directed.

S&F 300mm long, aluminium alloy, anodised aldrop door bolt including fixing clips of sheet, cast or extruded section and fixing bolts and 16mm dia bolt of sliding bolts of extruded sections complete all as specified and directed.

S&F in repair aluminium door strip with brush fixed as in door bottom fixed with nails or screw complete all as specified and directed.

S&F in repair 20 mm dia Stainless steel curtain rod of wall thickness not less than 1mm with both side decorative brackets and fixing brackets complete all as specified and specified.

S&F in repair CP brass tubular towel rail 20mm dia, 'D' type, 60 cm long between flanges, fancy type, superior quality, fixed with brass screws complete all as specified and directed.

M&L for plain cement concrete 1:5:10, type E2 using 40 mm graded aggregate as in sunken filling and mass concrete works complete all as specified and directed.

M& L for Pressed steel frames 105x65mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., complete all as specified & directed.

M & L for 35 mm thick factory made Plain, framed, panelled shutters (twopanel) with lock rail and panel of 9 mm B.W.P commercial ply or 12 mm veneered particle board with commercial veneering on both faces, The size of rail and stile as per IS: 1003 (Part-I) Kiln seasoned and chemical pressure treated complete all as specified & directed.

M&L for 35 mm thick flush shutter, solid core construction with block board core and plywood face panels, commercial type on both sides complete all as specified and directed.

Dismantling of floor hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed.

M&L for 18 to 20 mm thick machine cut kota stone flooring ,laid & jointed with grey cement slurry mixed with pigment to match the shade of slab including rubbing and mirror polishing finished laid over and including 15 mm thick screed bed or bedding layer in CM (1:6) complete in repairs all as specified and directed.

M&L for 18 to 20 mm thick machine cut kota stone as in riser of step, dado and skirting over and including 10 mm thick 1:4 CM backing on vertical surface of wall with rubbing and mirror polishing finished complete all as specified and as directed.

M & L for non skid coloured ceramic floor tiles 7 to 8 mm thick (square/ rectangular) area of each tile exc 0.18 Sqm but n exc 0.38 Sqm,in floor etc set & jointed in neat cement slurry and pointed in white or coloured cement to match the surface over and including 15mm thick screed bed or bedding layer in CM 1:6 complete all as specified and directed.

M&L for glazed ceramic coloured wall tiles in vertical surface 450 X 300 X 7mm thick, set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 10 mm thick rendering in 1:4 CM complete all as specified and directed.

M&L for preparation of new wooden surface of any description over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed.

M&L for preparation of old painted surface of steel surfaces (previously decorated) painting with one coat of synthetic enamel paint on old steel surfaces complete all as specified and directed.

M&L for preparation of old decorated surface of ceiling and applying one coat of white wash on ceiling complete all specified and as directed.

M&L for complete removal of existing finishes / treatment of existing surface of over head RCC water tank (Height not less than 21 mtrs) including soffit of dome, column, bracing etc by steel wire brush or by any other means, washing the surface thoroughly, filling the cracks on surface upto or less than 10 mm with sealing compound " crack x shrink free of Dr fixit" applying exterior grade wall care putty to make the surface even & smooth completely undulation free & apply two coat of dulux weather shield ultra clean weather coat over & including a coat of biocide/ anti algai or fungal primer complete including all necessary arrangements of scaffolding etc complete all as specified and directed. (Note : The work to be carried upto height not less than 21 Mtr. Cost of scaffolding and its removal deemed to be included in quoted rate.

S&F in repair steel rolling shutters without ball bearing including top cover anchoring rod, hasp and staple and one shop coat of primer, erected in position push pull or manual type thickness of laths 1.00 mm including taking down old unserviceable rolling shutters complete all as specified and directed.

All as per Sl item No. 59 but gear operated type with bevel gear box and crank handle.

Supply only safety lever locks mild steel with 4 levers for rolling shutters

Supply only Ball bearing for rolling shutters (Make-NBC/SKF/TATA)

M&L for preparation & removal of loose and disintegrated concrete of RCC column / beam / wall etc by low impact hammer including removal of debris outside MD land cleaning of surface with wire brush and apply approved epoxy based bonding coat on existing concrete surface to achieve sound bond between existing and new micro concrete surface including necessary formwork working height exceeding 20 mtrs and application of complete treatment shall be through approved applicator all as per manufacturers instruction complete all as specified & directed.

S&F in repair ball/ float valves high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe and fixed 20mm bore minimum weight 210 gms complete all as specified and directed.

S&F in repair 20mm bore gun metal, globe or gate valves, with iron wheel heads, screwed both ends for iron pipes and fixed complete all as specified and directed.

S&F rotational moulded polyethylene water storage tank of capacity 500 ltr (Cylindrical/vertical with closed top) triple layer construction, ISI marked hoisted & fixed in position including dismantling of old tank and removing from site complete all as specified and directed.

S&F vitreous china wash and basin, white, flat back, size 550 mm x 400 mm fixed on MS bracket including cutting for and pinning in ends of brackets or erecting stand but exclusive of fixing of supply and waste pipe, waste fitting, pipe and union complete all as specified and directed.

M&L for plain cement concrete type B-2 1:2:4 using 40mm graded aggregate as in surface channels and drains all as specified and directed.

S&F in repair Stainless steel letters 450 mm height and 32 mm depth made of 1 mm thick stainless sheet with seamless welding rubbed polished and edges made smooth with necessary fixing devices complete all as specified and directed .

M&L for 60 mm thick M-35 grade factory made rubber moulded vibratory compacted cement concrete interlocking paver block in approved design and colour confirming to IS 15658-2006 with grey cement and pigment as approved and laid over and including 30 mm thick sand cushion and joints filling with sand complete all as specified and directed.

M&L for providing PCC 1:4:8 type B-2 (using 40mm graded stone aggregate ) as foundations, filling, and mass concrete etc complete all as specified and directed.

Taking down cement plaster on brick wall or stone wall etc including raking out joints hacking for key, scrubbing down with water etc complete all as specified and directed

Demolition of brick work built in cement mortar of any description including all quions arches, pillars, etc complete all as specified and directed.

M&L for brick work with fly ash bricks ,straight or curved on plan exc 6m mean radius built in cement mortar 1:6 complete all as specified and directed.

M&L for rendering 15mm thick in CM 1:4 on fair faces of brick work or concrete surfaces with liquid water proofing compound finished even & smooth without using extra cement complete all as specified and directed. Note:- Liquid water proofing compound shall be measured & paid separately.

M&L preparation of new plastered surface of wall and applying three coat of white wash on wall with paint sprayer machine complete all as specified and directed.

Supply only Liquid water proofing compound (ISI marked) complete all as specified and directed.

Dismantling of fencing barbed wire any size & any thickness, fixed with steel or RCC post if any complete all as specified & directed.

Dismantling posts or struts (wood, steel or R.C.C.) any section, including taking out embedded portion and making good disturbed ground as directed and specified.

Excavation in post holes (or similar holes) each not exceeding 0.5 cum getting out, returning, filling in and ramming earth or broken rubble mixed with earth around in layers not exceeding 25 cm complete all as specified and directed.

M & L for plain cement concrete type C2 1:3:6, using 40 mm graded crushed stone aggregate in foundations, filling and mass concrete using 40 mm graded aggregate complete all as specified and directed

S & F for Fe- 290 Gde E- 165 Rolled mild steel in Joist, channel, angle, or tee sections, fixed independently, without connecting plates, etc. (cut to ordinary lengths i.e. within 20mm of the length indicated. Complete all as specified and directed

S & F Mild steel screw bolt (machine made) with hexagonal or square head at one end and screwed the other or screwed both ends, dia of shank 5 to 10 mm length of bolt each screwed end to be fitted with washer and one hexagonal or square nut exceeding 5 cm and not exceeding 10 cm long etc complete all as directed and specified.

Fixing only chain link fencing including line wires, any mesh, size and type to any type of standards, rails, straining bolts, etc including provision of binding wires complete all as specified & directed.

Supply only chain link fencing of size 50 mm x 50 mm, diamond square type weight not less than 4.50 Kg/ Sqm complete all as specified and directed

M&L for galvanized 2 strand 2.24 mm dia steel barbed wire, barbed with 2mm dia barbs at 75mm (approx.) spacing and straining and fixing to any type of post, straining bolts, including securing or tying at crossing with and provision of galvanised mild steel wire, staples or steel pins etc. complete all as specified and as shown on the drawing including straining bolts complete all as specified, directed and shown on drawings. Note:-Each line of wire to be measured separately

S&F mild steel round bars 12 mm dia and over, cut to length, bent to shape required including cranking as support for fixing of chain link fencing complete all as specified & directed.

M&L for preparation of new or previously untreated surfaces of steel or iron of any description over 10cm width or girth, not otherwise described and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.

M&L for preparation of new or previously untreated surfaces of steel or iron of any description not exceeding 10cm width or girth, not otherwise described and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.

Excavation over areas, not exceeding 1.5m deep and getting out in soft / loose soil complete and getting out in soft/loose soil complete all as specified and directed.

Returning filling in including spreading, levelling, watering and well ramming of soil in layers not exceeding 25 cm complete all as specified and directed.

Removing excavated soil material exc 250m but not exceeding 500 mtr distance and deposited where directed at a level n exc. 1.5m above the starting point all as specified and directed

M & L for Reinforced cement concrete design mix M-25 using 20 mm graded stone aggregates in foundations, footing, plinth beams, bases for columns and mass concrete complete all as specified and directed. Note:- Reinforcement to be measured & paid separately under respective item.

M & L for Reinforced cement concrete design mix M-25 (using 20 mm graded stone aggregates) in columns, pillars, posts & struts complete all as specified and directed. Note:- Reinforcement to be measured & paid separately under respective item.

M & L for Reinforced cement concrete design mix M-25 using 20 mm graded stone aggregates in lintels over 1.5m clear span, beams and cantilevers complete all as specified and directed. Note:- Reinforcement to be measured & paid separately under respective item.

Use & waste of formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter complete all as specified and as directed

Use & waste of formwork to sides of pillars, posts, struts, piers, columns and stanchions with rough finished surface complete all as specified and as directed

Use & waste of form work to sides and soffit of floor or roof beams, beam haunching, girders, bressumers, lintels, cantilevers, shelves including supports, overhangs, etc rough finished complete all as specified and as directed

M&L TMT bar 10 mm dia and over, cut to length, bent to shape required ,including cranking ,bending spirally for hooping for columns,hooking end and binding with and including mild steel wire and annealed not less than .9 mm dia or securing with clips complete all as specified and directed.

M&L TMT bar 5 mm dia & over upto & including 10 mm dia in stirrups, spaces and binders , cut to length, bent to shape required ,including cranking ,bending spirally for hooping for columns, hooking end and binding with and including mild steel wire and annealed not less than 0.9 mm dia or securing with clips complete all as specified and directed.

M&L for preparing of newly plastered wall surface and applying two coats of cement base paint over a coat of primer complete all as specified and directed.

S&F PVC (SWR) pipes, Single socketed, in any length with rubber ring joints, laid to floor / trenches, 110 mm bore complete all as specified and directed.

S&F Mild steel conforming to Fe 290-0 Gde- E-165 as in framed work such as grills, gratings, etc with ends of bars shouldered and/or riveted or forged into spikes; framed guard bars; ladders; railings and similar work complete all as specified & directed.

M&L for concealed submain wiring using FRLSH PVC insulated, unsheathed stranded copper conductor cable two single core of size 6.0 Sqmm of voltage rating upto and including 1100 volts drawn in and including PVC concealed conduit of dia not less than 20 mm dia with all fittings and accessories along with one run of PVC insulated unsheathed stranded copper conductor of size 6.0 Sqmm as earth continuity conductor complete all as specified & directed. Note:- (i) Two runs of single core PVC cable with one run of earth conductor and conduit shall be measured as one length. (ii) The cost for cutting, chases required shall deemed to be included in the quoted unit rate.

S&F in replacement sheet metal enclosure for MCB's 240 volt 8 way single pole and neutral with 200 amps rated busbar, double door on wall with and including suitable flat iron clamps duly grouted/ fixed flush in the wall complete all as specified and directed.

S&F MCB single pole, 6 to 32 amps rating, 240 volts, 'C' curve, 10 KA breaking capacity & making connection complete all as specified and directed.

S&F MCB SPN 40/63 Amps 'C' curve breaking capacity 10 KA of rating & making connection complete all as specified & directed.

Taking down carefully point wiring of any type complete for light, fan socket or power point with fittings & fixtures such as ceiling rose, electric fittings, holders, switches, sockets, regulators, wooden batten, surface conduit/casing caping/conceal etc. removing materials including accessories for taking credit and making good disturbed surface to match the existing complete all as specified & directed.

M&L for point wiring with FRLS PVC insulated unsheathed stranded copper conductor cable 1.5 Sqmm (nominal area) 1100 volts grade, along with one single run of same size and type of copper wire as continuous earth wire to common earth dolly drawn in and including non metallic PVC rigid, medium grade concealed conduit with all fixing accessories of 20mm dia, using new MS sunk terminal boxes of thickness not less 1.2mm, new 3mm thick laminated sheet cover with brass screw and cup washers with all accessories and making good to disturbed conceal surfaces complete all as specified and directed. Note:(a) Colour code of wire shall be strictly followed , Red for Phase , Black for neutral and green for earth wire (b) The unit rate quoted is deemed to be inclusive of cost of cutting chases in wall for providing concealed conduit and making good to match with existing finish/surface.

One light/fan/bell point controlled by one switch

One point for socket outlet 5 amps on independent board but not below the switch board in same vertical plane.

One point for socket outlet 5 amp same board.

All as per srl item No. 178 above but for one 3 pin socket outlet 15 amps, independent, with cables 4 sqmm size on independent board 4 Sqmm earth wire complete all as specified and directed.

S&F ceiling rose surface type bakelite 65 X 50 mm three terminal complete all as specified and directed.

S&F angle/ lamp/ batten type holder insulated body with back plate suitable for light point complete all as specified and directed.

S&F modular Switch piano single pole one way 6 amps complete all as specified & directed.

S&F modular Socket out let 2 in one, 5/3 pin 6 Amp flush type 2 module complete all as specified & directed

S&F modular switch, 16 Amps flush type single pole one way complete all as specified & directed.

S&F modular socket outlet 2 in 1, 3 pin, 2 module 5 &16 Amps flush type complete all as specified & directed.

S&F modular fan regulator, electronic type, 5 stepped, 120 watt, flush type , single phase 230 volt including connection complete all as specified & directed.

S & F MODULAR metal flush box suitable for 6 module type complete all as specified and directed.

S & F MODULAR metal flush box suitable for 4 module type complete all as specified and directed.

S & F MODULAR metal flush box suitable for 3 module type complete all as specified and directed.

S & F MODULAR white cover plate with frame suitable for 6 module type complete all as specified and directed.

S & F MODULAR white cover plate with frame suitable for 4 module type complete all as specified and directed.

S & F MODULAR white cover plate with frame suitable for 3 module type complete all as specified and directed.

S&F Exhaust fan 300 mm sweep steel body complete and louvers shutters including required length and size of copper stranded conductor for connection from ceiling rose to connector of fan with provn of making hole in wall complete with grouting of nuts, bolts and washers and all other accessories required for fixing of fan including testing complete all as specified and directed.

S&F in replacement LED tube light fittings decorative ultra slim linear fixture with extruded alluminium heat sink environmental friendly Energy efficient ready to use pack ,1x18/20 Watt ,4 feet, surface mounting type extruded pvc, snap on installers and domestic electronic Driver ,connector block etc. with all accessories internal prewired & including connecting up with 2 core flexible copper conductor cable with suitable size & suitable for and mounting clamps PVC square box 75x75mm - 2 Nos etc complete all as specified & directed.

S&F in replacement energy efficient LED light of 10 Watt of length - 02 Feet long having minimum 1150 Lumen output, wide voltage protection range 140-270 Volt AC housed in extruded aluminum housing (enhances safety) with high quality polycarbonate diffuser including making connection with two core PVC insulated, sheathed copper conductor cable of size 23/0.0076 complete all as specified and directed.

S&F LED light fitting 10 Watt bulkhead luminaries in high pressure die cast aluminium housing, lumen out put - 700 Lm, colour Temp - 6500 K having Ingress protection - IP 65 fpr dust, water & IK 08 for external impact including LED light driver holder connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed.

S & F LED street light fitting 35 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection bracket for street light made out of 40 mm bore GI pipe medium grade not less than 1.2 mtr length bent at 120 degree to shape fixed on pole/wall with and including 50x6mm FI clamps = 02 Nos with nut bolts, washers including painting of clamps with two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.

S&F in replacement of DIGITAL WATER LEVEL INDICATOR DEVICE, operating of single phase supply, direct display in 19 mm size digit system in meter / centimeter of water level of OVER HEAD TANK / UNDER GROUND SUMP, the entire unit must operate through a compact electronic circuit, which must ensure reliable operation at 230 volts +/- 5% with reliable in digit display, the circuit must housed in M.S. CRC sheet box with nylon moulded connection strips. The level system must resistance transducer, which unaffected by corrosion and other contacts available in water. The product must be controlled by micro switch ( should not be sensor system) the whole unit must electronically controlled & the uper level and lower level indicator must be highly sensitive MICRO SWITCH. The complete unit must be in two parts. Each complete part must be fitted in MSCRC sheet box separately. One must be installed at over head tank / UG sump and second at PUMP HOUSE with proper powder coating paints, complete all as specified & directed.

S&F in replacement of PVC insulated copper cable of size 1 Sqmm 3 core for water level monitor device including GI wire of dia 2 mm for hanging and support of copper cable complete all as specified & directed.

Supply, installation, testing and commissioning in replacement of indoor type starter panel of suitable size for termination point for cable, 415V, 3 phase, 4 wire, AC 50 Hz cubical type panel with aluminium busbar of capacity 200 Amp - 04 Nos shall be dust proof, vermin proof and powder coated painting made out of 3.15 mm thick CRCA sheet with angle iron frame of size 40 x 40x 6 mm front opening with locking arrangement with 50 mm lock including & outgoing phases including grouting / fixed on wall complete all as specified & directed to accommodate the following items:-

Schedule of Credit (MINUS) Rs. 13168.00 B/F from Serial Page No. [Note : Details of items for schedule of credit is given on Srl Page No. ] This amount shall be automatically deducted to arrive at tendered sum

KHALSA BUILDER (BID ID -3151841)

Channa Brothers and Co. (BID ID -3151970)

M/S VIVEK DUBEY (BID ID -3152031)