Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹23.4 LAccepted-AOC 512 227 5TH LANE NISHANTGANJ LUCKNOW 226016 | LUCKNOW | LUCKNOW | UTTAR PRADESH | 226016 | L1 | Accepted-AOC LOWEST | |
| 2 | L2₹26.5 L+₹1.1 L (4.43%)Rejected-Finance | L2 | Rejected-Finance OTHER THAN LOWEST | |
| 3 | L3₹28.4 L+₹3.0 L (12.0%)Rejected-Finance | L3 | Rejected-Finance OTHER THAN LOWEST | |
| 4 | L4₹29.9 L+₹4.5 L (17.8%)Rejected-Finance 93 SARASWATI PURAM COLONY SG PGI LUCKNOW UP 226 014 | LUCKNOW | LUCKNOW | UP | 226014 | L4 | Rejected-Finance OTHER THAN LOWEST | |
| 5 | L5₹30.6 L+₹5.3 L (20.7%)Rejected-Finance MD 1 236 SECTOR D1 LDA COLONY KANPUR ROAD LUCKNOW U P PIN 226012 | LUCKNOW | UTTAR PRADESH | 226012 | L5 | Rejected-Finance OTHER THAN LOWEST |
Tender Value
₹35 L
EMD Value
₹70,000
Closing Date
24 Aug 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE (WEST) LUCKNOW
GE (WEST) LUCKNOW PIN 226002 C/O 56 APO
REPAIR TO JOINERY CUPBOARDS ETC AT ZONE A AND C AREA OF AGE B/R I UNDER GE (WEST) LUCKNOW
2023_MES_610978_1
GE/W/LKO/32 OF 2023-24
Open Tender
Civil Works
Item Rate
270 days
Lucknow
AS PER NIT AND TENDER DOCUMENTS
9 documents required · 9 mandatory
₹500
GE (WEST) LUCKNOW
₹70,000
Yes
6 Oct 2023
27 Jul 2023
26 Aug 2023
27 Jul 2023
24 Aug 2023
10 Aug 2023
27 Jul 2023 - 3 Aug 2023
Amount
Material and Labour for brick work with fly ash bricks straight or curved on plan exc 6m mean radius built in CM 1:6 including demolitio of old brick masonery complete all as specified and as directed.
Material and Labour for brick work with fly ash bricks straight or curved on plan exc 6m mean radius in half brick thick walls built in CM 1:4 including demolition of old brick masonery complete all as specified and as directed.
Taking down cement or cement lime plaster on brick or stone walls etc. including raking out joints, hacking for key, scrubbing down with water, etc complete all as specified and as directed.
Material and Labour for rendering 10mm thick in CM 1:6 on brick work or concrete surface and finishing the surface even and smooth without using extra cement complete all as specified and as directed.
Material and Labour for rendering 15 mm thick cement plaster in CM 1:4 on fair faces of brick work or concrete surface and finishing the surface even and smooth without using extra cement all as specified and as directed.
Material and Labour for rendering 10 mm thick cement plaster in CM 1:3 on ceiling of brick or concrete surface and finishing the surface even and smooth without using extra cement all as specified and as directed.
Cutting holes in brick work built in cement mortar for inserting hold fast and making good dismantled portion in CM 1:3 depth of cutting from the face of jamb/wall exc half brick but n. exc one brick complete all as specified and as directed.
Taking down chowkhat with shutter (without taking off shutter from the frame) area n.exc 1.5 sqm each complete all as specified and as directed.
Taking down chowkhat with shutter (without taking off shutter from the frame) area exc 1.5 sqm but n.exc 4 sqm each complete all as specified and as directed.
Taking down shutters of any description exc 1.0 sqm but n. exc 2.0 sqm each complete all as specified and as directed.
Taking down shutters of any description n. exc 1.0 sqm each complete all as specified and as directed.
Taking down and refixing only shutter of any description exc 1 but n.exc 2 sqm in the same opening complete all as specified and as directed.
Supply and Fixing Factory made steel windows double shutter with tubular frame of size 40x79mmm having thickness of steel sheet not less than 1.5mm with 'Z' section side hung glazed shutter fixed (with sash bar) on external side and with wire guage shutter (without sash bar) on internal side and including steel handle 100mm long of MS flat 20x5mm made to shape 02 nos of MS tower bolts 100 mm on each shutter and fixing hooks & eye of standerd complete all as specified and as directed by Engr -in -charge.
Supply and fixing framed work such as grills, gratings etc with ends of bars shouldered and / or riveted or forget into spikes, framed guard bars, barred iron doors, ladders, framed balusters, walkways, railings, frame work of water tank and similar work conforming to Fe 290 Gde E-165 complete all as specified and as directed.
Supply and fixing Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification & drawingcomplete all as specified and as directed.
Supply and fixing Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing. complete all as specified and as directed.
Supply and Fixing Pressed steel frames of size 105 x 60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate etc, PCC filling in door frame complete all as specified and as directed. Note : PCC 1:3:6 type Co using 12.5mm graded stone aggregate filling inside door frame includes the cost of rate quoted for item.
Supply and Fixing Pressed steel frames of size 125 x 60mm for doors with one or more rebates including necessary fixing lugs, lock strike plate etc, including PCC filing in door frame complete all as specified and as directed. Note : PCC 1:3:6 type Co using 12.5mm graded stone aggregate filling inside door frame includes the cost of rate quoted for item.
Supply and fixing second class hard wood (sal) plain, solid, straight chawkhats and frames, wrought, framed, rebated on the solid rounded or chamfered, put together with glue pinned at joints complete all as specified and directed
Supply and fixing for 30mm thick factory made flush shutter solid core construction with block board core and plywood face panels, commercial type on both sides complete all as specified and as directed.
Supply and fixing 35mm thick Second class hard wood (sal) glazed & skelton shutters ,open rebated, prepared to receive glass, gauze etc,without shash bar edge of framing plain, chamfered or rounded, fitted with cut or mitred beads for securing glass, gauge etc sizes of members of shutters as specifed in SSR Part-I section 8 clause 8.24(a) supplied and fitted to chawkhats complete all as specified and as directed
Supply and Fixing powder coated (thickness of powder coating shall not be less than 50 micron) aluminium frame for doors, windows, ventilators with one or more rebates including joining cleats for fixing etc complete all as specified and as directed.
Supply and fixing in repair anodised aluminium glazed side hung door shutter with frame using section 100 x 44mm x 1.5 mm thick with standard door section having style, top rail, lock rail as 83 x 44 x 1.5mm where as bottom rail will be made up of 100 x 44 x 1.5mm including 5mm thick plain sheet glass ordinary quality (Modi/Atul) including all necessary suitable handle, hinges, screw, jointing cleats, rubber packing, Aluminium snap beading and one No 200mm long Aluminium tower bolt, 100 mm long 3 Nos Aluminium hinges B-21 type and one No Mortice lock 100mm size 4 lever (vertical type) and hydraulic door closure for each shutter complete all as specified and as directed.
Supply and Fixing in repair powder coated(thickness of powder coating shall not be less than 50 micron) aluminium three track sliding type glazed window shutter with 5mm thick plain sheet glass fixed open track section 100x38x1.25mm having three track (two of glass & one of stainless steel wire cloth of 0.36mm nominal dia of wire and average width of aparture 1.40mm) with members of window shutters of section 38x12x1.5mm and other standard Bombay sliding section including all necessary fiber wheel rollers suitable handle to facilitate sliding and all necessary jointing cleats glazing clips,rubber packing, Aluminium snap beeding etc complete all as specified and directed
S&F 4 mm thick sheet glass,ordinary quality and glazing with oil putty in square n exc 0.5 sqm in each pane complete all as specified and directed
Supply and fixing 300 mm long aluminium alloy, sliding door bolt with hasp & staple (bolt type) and fixing clips of sheet cast or extruded section and fixing bolts and sliding bolts complete all as specified and directed
Supply and fixing 100mm size Decorative type, handles of stainless steel ISI marked complete all as specified and as directed.
Supply and fixing 150mm size aluminium handle, fabricated type anodised, ISI marked complete all as specified and as directed.
Supply and fixing aluminium anodized barrel tower bolts 150 mm of extruded section complete all as specified and as directed.
Supply and fixing butt hinges 100mm, mild steel hinges medium weight and fixed complete all as specified and as directed.
Supply and fixing in repair butt hinges 100mm, mild steel hinges medium weight and fixed complete all as specified and as directed.
Supply and fixing 100mm size hasp and staple aluminium anodised including bolt to hinge plate and fixed with screws complete all as specified and as directed.
Supply and fixing 0 cranck /shelf closing hinges suitable for CB/Kitchen cabinet weight and fixed complete all as specified and as directed.
S & F in repairs 18/19 mm thick plywood interior grade both side with comercial face fixed with screwed to timber frame work edge chamfered as directed by Engineer-in-Charge complete all as specified and as directed.
S & F 0.9 mm thick Decorative laminate (Mica) type 1 of surface finish, colour and pattern as approved, fixed with approved adhesive as per manufacturer's instructionas directed by Engineer-in-Charge complete all as specified and as directed.
Supply and fixing 30 mm width of flaps continuous piano hinges MS bright finish are electroglavanised complete all as specified and as directed.
S&F in repair PCV kitchen cabinet & CBs, wardrobe etc with suitable frame including shelves in required sizes at site made out 18mm thickness one side decorative lamination and other side balancing lamination sheet & provision of shutters made out 18 mm thick with decorative laminated PVC sheet all,with required brackets stainless steel screw etc.the panel shall be fabricated using adhesive and screws where ever required.all the edges should be covered with 2 mm thick edge bonding tape or 90 degree edge bend finish including all necessary fittings as per site requirement and as per make and specification mentioned c complete all as specified by manufacturer instruction and as directed. Note- Density of PVC solid sheet should not be less than 575 kg/M Cum
M&L 18-20mm thick granite stone slab, machine cut and polished in both side as in shelves and partition in cupboards, bedded and jointed with grey cement slurry and pointed with white cement (1:2) using marble dust with admixture of pigment to match the shades of granite stone, including rubbing, grinding, polishing including making sandwitch moulding to edges complete all as specified and as directed.
M & L for glazed ceramic colour tiles of size 300 x450mm x 7mm thick on walls etc, set & jointed in neat cement slurry and pointed in white or colours cement to match the colour of tiles as in skirting/dados over and including10mm thick backing coat in CM 1:4 all as specified and directed.incl Dismantling of floor hearth or wall tiling including cement mortar bedding but not backing and removing serviceable tiles to store yard and rubbish off the primises complete all as specified and directed
M &L for Non skid ceramic coloured floor tiles shade as approved and size 300 x 300mm x 7mm thick set on 15mm thick in screed bed in cement mortar (1:6) and pointed in neat cement slurry including jointing with white or colour cement to match including dismantling of old tile complete all as specified and as directed
S & F 18mm thick factory made 100% solid WPC flush shutter (for cupboard, wardrobe ,etc) made from co-extruded three layer rigid foam sheet Single extruded) with 0.8 to 1mm thick outer layer having density not less than 1400kg/cum and density of center core not less than 600kg/cum, with prelamination on both front and back side manufactured by and ISO 9001/2015 certified company complete all as specified and as directed.
Supply and fixing in repair rubber beading size 65x5mm for doors complete all as specified and as directed.
Supply and Fixing Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and as directed.
Supply and Fixing in repair Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and as directed.
Supply and fixing aluminium floor door stopper two legged and tongue with hard drawn steel spring fixed to floor 150mm complete all as specified and as directed.
Supply and fixing in repairs Aluminium floor door stopper two legged and tongue with hard drawn steel spring fixed to floor 150mm complete all as specified and as directed.
Supply and fixing 300mm mild steel ordinary rat tail rod pattern springs, including roller and roller plate complete all as specified and as directed.
Supply and fixing in repair 300mm mild steel ordinary rat tail rod pattern springs, including roller and roller plate complete all as specified and as directed.
Supply and fixing sheet Glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long complete all as specified and as directed
Supply and fixing in repairs Mild steel window handle left/right including neccesary welding complete all as specified and as directed.
Supply and fixing in repairs Mild Steel window peg stay for supporting window glass etc complete all as specified and as directed.
Material and Labour for 3mm thick plain sheet glass ordinary quality including glazing with putty area n.exc 0.5 sqm in each pane including taking out old broken glass complete all as specified and as directed.
Material and Labour for preparation of new or previously untreated surface of wood or wood based materials of any description over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed
Material and Labour for preparation of new or previously untreated surface of steel surface of any description over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and as directed.
Taking down anodised aluminium door shutters, side hung or fixed type exc 1.5 sqm and n. exc 4 sqm and refixing in same opening after repairing including necessary jointing cleats, glazing clips, rubber packing, screws etc and with existing anodised aluminium snap beading, screws anodised aluminium fittings such as hinges type B-21, 125mm long anodised section complete including floor door spring hydaulically regulated complete all as specified and as directed.
Supply and fixing in repair Aluminium (Die cast) body Door closer hydraulically regulated designation No 3 universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed complete all as specified and as directed
S&F in repairs double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover,governing pivot made of brass,other parts made of mild steel heavy duty and fixed complete all as specified and directed
Material and Labour for preparation of new plastered surfaces of wall and applying two coats of oil bound distamper complete all as specified and as directed.
Material and Labour for preparation of new plastered surfaces of wall and applying three coats of white wash complete all as specified and as directed.
Material and Labour for preparation newly plastered surface of wall and applying two coats of cement base paint complete all as specified and as directed.
Supply and fixing 8 to 10 mm dia dash through bolts (anchor fastner) of lenth exc 75mm but n exc 100mm including drilling holes in concrete/masonary walls structure using electrically oprated drill machine complete all as specified and as directed.
S & F in repair 25mm dia fancy type drapery curtain rod made of stainless steel including knobs (Latto) and side brackets complete all as specified and as directed.
Material and labour Running welding in repairs thickness of metal to be welded not exceeding 6 mm thick but not exc 9 mm thick complete all as specified and as directed.
Material and labour spot welding in repairs n. exc 2.5cm in length thickness of metal to be welded not exceeding 6 mm thick complete all as specified and as directed.
Supply and Fixing in repair Plain fillets square, rectangular or triangular in section exc 3 Sqcm n exc 6 Sqcm, Wrought finished, secured with nails or brads as in beads complete all as specified and as directed.
Supply and fixing in repair 50mm dia, polished, hard wood knobs fixed with screws complete all as specified and as directed
Dismantling of timder scantlings (unframed) 40 sq.cm and over in section, in any position complete all as specified and as directed.
Material and Labour rolled sections as in main and cross beams, hip and jack rafters purlins where connected to common rafters and running rails and guides for sliding doors fixed with angle cleats or other connecting plates Fe 410-W(Gde- E- 250) quality-A complete all as specified and directed.
Dismantling asbestos cement (corrugated, semi corrugated etc) sheets & ridge in roof coverings Material and Labour for 6mm thick asbestos cement, corrugated or semi-corrugated sheets fixed in roofs, walls etc with Fixed with L-type or J-type or cranked hook bolts complete all as specified and as directed.
Material and labour for Asbestos cement serrated ridge for corrugated or semi corrugated sheets complete all as specified and as directed.
S & F in repair suspended false ceiling with "E" grid suspended ceiling grid system of grid size 600 x 600mm but excluding snap grid including preparation of surface and applying two coats of synthetic enamel paint over a coat of primer complete all as specified and as directed complete all as specified and as directed.
Taking down and refixing of aluminiun window shutter (sliding/opanable) in the same opening after repair/overhauling of aluminium shutter complete incl all necessary rubber beading,aluminium snap beading ,hinges, floor door spring etc complete all as specified and directed
Supply and fixing in repair for aluminium section of size 38x65x1.3mm thick partition wall fixed to wall on aluminium frame work fixed panel with 5mm thick plain glass and fixed with glazing clips rubber beading including suitable section complete all as specified and as directed
Dismantling Wall and ceiling boards (fibre,pulp, insulation, etc.) or insulation boards/slabs/blankets, any thickness, including cover fillets
S&F 5mm thick PVC sheet fillet of width 35mm for wall paneling inclusive of fixing on to wall to make PVC Frame as per specification and drawing complete all as specified and directed.
S&F Solid PVC Wall Lining consisting of 5mm thick single side prelam PVC sheet used instead of plain colour sheet inclusive of solvent cement and fixing at site on PVC frame as per specifications and drawing complete all as specified and directed
S&F in repair Anodised aluminium grill (anodised transparent or dyed to requiredshade according to IS: 1868 with minimum anodic coating of grade AC 15) of approved design/pattern, with approved standard section and fixed to the existing window frame with C.P. brass/ stainless steel screws @ 200 mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening, complete all as specified and directed
S&F in repair heavy duty drawer channel/slider of size 450 mm to 600 mm suitable for cup board and kitchen drawer complete all as specified and directed
M/s J C Oberoi
M/s JP Constructions
M/S Reliance Construction
R K CONTRACTOR AND SUPPLIERS
abhinish traders
m/s raghubar dayal
EVEREST CONSTRUCTION
QUALITY CONSTRUCTIONS CO
M/s Rathore Traders
stage.html
html • 0.07 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .