REPAIR TO E/M INSTALLATION, PUMP HOUSE OF CENTRAL AREA, 512 AND CAFVD UNDER AGE B/R (I) OF GE (C) KIRKEE

Amount

Removing of old water proofing treatment and cleaning the surface of slab and clearing with wire brushes, removing dust, foreign materials, rubbish off the site to a distance n exc 100 m complete all as specified and directed by Engr-in-Charge.

M&L Rendering/plastering, 10 mm thick in cement mortar (1:3) on any face of brick walls or concrete surfaces, surfaces finished even and smooth without using extra cement with WPC 3% by the weight of cement complete all as specified and directed by Engr-in-Charge.

M&L for water proofing treatment over RCCslab by applying oil based bituminous primer surface @ 0.25 kg/sqm and laying 3 mm thick APP modified water proofing polymeric membrane with 100 mm side and end lap having weight not less than 3.5 kg/sqm reinforced with non woven polyster reinforced mat weighting not less than 160 gms/sqm polyster core having soften point not less than 1500C, longitudinal tensile strength not less than 650N/5cm, by torching method and applying a coat of solar reflective alumunium paint @ 0.15kg/sqm on membrance surface including 24hrs ponding test complete all as specified and as directed by the Engr-in-Charge.(Note-MTC & independent test certificate shall be submitted by contractor before execution of work)

Dismantling asbestos cement/Galvanised mild steel sheets/ (corrugated or semi corrugated) sheets in roof covering complete all as specified and directed by Engr-in-Charge.

Dismantling cast iron work of any description complete all as specified and directed by Engr-in-Charge.

M&L Fe 410 -W(Gde-E- 250) quality-A, Joist, channel, angle,tube or tee sections,hollow section fixed independently, without connecting plates, etc. as in roof trusses, poles,purlines etc (cut to ordinary lengths i.e. within 20mm of the length indicated) complete all as specified and directed by Engr-in-Charge.

M&L for 0.63 mm thick (0.5 mm min) pre painted Galvanised, corrugated mild steel sheeting with two corrugations side lap, fixed with coach screws and washers, in roofs, walls etc. with grade of zinc coating 275,fixed with L-type or J-type or cranked hook bolts in lieu of screws complete all as specified and directed by Engr-in-Charge.

M&L for 0.63mm thick (0.5 mm min) pre painted Plain, galvanised, mild steel sheeting, in ridges, hips, valley gutters, drip and straight flashings (length and girth as fixed) with grade of zinc coating 275. complete all as specified and directed by Engr-in-Charge.

M&L 6mm thick asbestos cement, corrugated or semi-corrugated sheets in roofs, walls etc fixed with coach screw complete all as specified and directed by Engr-in-Charge.

M&L Asbestos cement one piece plain angular ridge 6mm thick Fixed with coach screws complete all as specified and directed by Engr-in-Charge.

S&F Gypsum reinforced boards 600x600x8-10mm thick for ceiling hot dipped galvanised iron imposed grid with 24mm wide T-section exposed flanges which shall be powder coated white. The frame work shall comprise of main runner made from 0.33mm thick GS sheet and of size 24x32x3000mm and spaced at 1200mm centres securely fixed to the structural soffits by approved hangers at 1200mm maximum centres. Hangers of GI wire 4mm dia to be fixed by approved rawl plugs, level and justers and screws etc, The last hanger at the end of each main runner shall not be greater than 450mm from adjacent wall. complete all as specified and directed by Engr-in-Charge.

Flush fitting of 1200mm long cross tee (with double stitching) to be interlocked between main runners at 600mm from adjacent center to form 1200x600mm moulds cross tee longer than 600mm to be supported independently. 600x600mm modules to be formed by fitting 600mm long cross tee centrally between the 1200mm cross tee. Tee perimeter wall angle shall be of 0.45mm thick GS sheet of size 19x19mm and 300mm long of white colour all as per manufacture instructions and finishing the surface by applying two coats of plastic emulsion paint, including taking down existing Wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/ blankets, any thickness, includingcover fillets complete all as directed. (Note: During the fixing of false ceiling existing ceiling fan and downlight if any needs to taking down and refixing again and rates of the same shall be deemed to include in the quoted rate of this item.)

M&L for PCC surface preparation by cleaning the surface from any moisture dirt,wax grease,flux residue and all other contaminants, applying two coats of AS 2045 Epoxy primer on PCC surface, supplying and applying, two component dielectric coating on the prepared surface having electric strength not less than 32.2 KV/MM, Dielectric dissipation not less than 0.074, dielectric constant not less than 10.93K. flash point above 52 Degree Celcius, a film of thickness 3 mm is a achieved. complete all as specified and directed by Engr-in-Charge. Note;- (a) The contractor has to produce a certificate from a Govt approved lab certifying all the characteristic and propereties of caoting as stated above. (b)The contractor has to produced the test reports of the coatings applied at all the location to the complete satisfaction of Engr-in-Charge.(C) The coated rate is deemed to be inclusive of materials required for surface perparation.

Dismantling of floor hearth or wall tilling /kota stone/Granite/interlocking tiles incl cement mortar bedding and removing rubbish off the premises. complete all as specified and directed by Engr-in-Charge.

M&LGlazed ceramic tiles in vertical surface 450X 350X 7mm thick or equivalent set and jointed in neat cement slurry and pointed in white or colour cement to match including 10 mm thick rendering in cement mortar (1:3),pattern as approved by GE.

M & L for Matt finish ceramic tiles 7 to 8mm thick (square or rectangular) area of each tile excieeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set in neat cement slurry and pointed in coloured cement to match coloured tiles over 15mm thick screed bed in CM (1:6) all as specified and directed by Engr-in-Charge and tile sample as approvd by GE.

M&L Matt finish coloured ceramic tile 7 to 8 mm thick area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over 10 mm thick screed bed in cement mortar (1:4) including demolition complete all as specified and directed by Engr-in-Charge. (Make - Elite pinewood jhonson & jhonson or techno commercially equivalent in kajaria/somany)

M&L Matt finish Ceramic coloured tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in skirting etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including 10 mm thick rendering in cement mortar (1:3) including demolition complete all as specified and directed by Engr-in-Charge & tile sample shall be approved by GE.

S&F solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube, supplying & fixing in opening as per specification & drawing shown on Page No. 160 of SSR 2010 part II.

S&F Factory Made Solid PVC double Moulded Door Shutter, 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 5mm thick Moulded PVC Sheet on the front face & 5mm thick plain colour PVC sheet on back face, with MS square tube along the frame with wood free EPS supplying & fixing in frame at site as per specification & drawing all as specified and directed by Engr-in-Charge.

S&F aluminium anodised barrel tower bolts of extruded section 150 mm long. complete all as specified and directed by Engr-in-Charge.

S&F 100 mm Butt hinges, heavy weight, cold rolled mild steel, and fixed. complete all as specified and directed by Engr-in-Charge.

S&F aluminium alloy anodised handle, cast type 150mm long. complete all as specified and directed by Engr-in-Charge.

S& F in repair cast iron sanitary connection socket to fit WC out-let of any size and shape

S& F in repair 110mm PVC (SWR) WC connector any type

S& F in repair 75 mm PVC (SWR) multi floor trap with grating including jointing with solvent cement

S& F in repair PVC (SWR) gully trap 125/110 mm, setting and jointing with solvent cement

S& F in repair 100 mm Cast iron Nahani trap, with grating including jointing to waste pipe fixed in cement concrete type B-1 (1:2:4) complete all as specified and directed by Engr-in-Charge.

S&F in repair vitreous china Squatting pan white orissa pattern size 580x440mm with integral foot rests (Excluding flushing cistern & flush pipe) with 100mm dia bore cast iron P trap incl lime concrete bedding and making food the disturbed portion to match with the existing surface of floor. complete all as specified and directed by Engr-in-Charge.(Make: Cera/Parryware)

S&F Vitreous China wash down water closet pan (pedestal pattern), white (excluding fixing bolts, flushing cistern and flush pipe) fixed as in repair, complete all as specified and directed by Engr-in-Charge. (Make: Cera-CURTIS or Equivalent)

S&F in repair plastic water closet seat, white/black closet pattern with flat bottom and cover and mild steel chromium plated or aluminised hinging device. complete all as specified and directed by Engr-in-Charge. (Make: Cera Cat No.B150101 or Equivalent)

S&F in repair vitreous china wash basin white flat back size 580x450 mm excluding taps but incl 32 mm dia CP waste fitting and PVC waste pipe 610 mm long and brackets complete all as specified and directed by Engr-in-Charge.(Make: Cera Cat No.B2040115 or Equivalent)

Taking up or down 15 mm bore steel tubing and connections, complete all as specified and directed by Engr-in-Charge.

Taking up or down 20 mm bore steel tubing and connections,complete all as specified and directed by Engr-in-Charge.

Supply and fixing 15mm nominal bore,steel tubing, galvanised, medium grade including all fittings with screwed & socket joints and jointing complete, fixed to walls/celling ( on surface/concealed ) or laid in floors complete all as specified and directed by Engr-in-Charge.

All as per item No 34 above but for 20mm nominal bore complete all as specified and directed by Engr-in-Charge.

Disconnecting existing tanks n exc 500 litre capacity,setting aside ( or lowering if required ) for repairs,cleaning,etc. and hoisting if rrquired reconnecting and refixing in position as same. complete all as specified and directed by Engr-in-Charge.

M&L Cement concrete (1:3:6) type C-2 using 20 mm graded stone aggregate as in floor, plinth protection, 75 mm thick, surfaces finished even and fair without using extra cement as in plinth protection including provision of construction joints complete all as directed by Engr-in-Charge and as specified.

S&F 3 layered rotational moulded polyethylene water storage tanks capacity 1000 lit in white colour ( cylindrical vertical with closed top ) hoisted and fixed in position including dismantling and removing of old tank complete all as specified and directed by Engr-in-Charge.(Make: Sintex/Plasto/Infra)

S&F in repair 15 mm bore Bib taps, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule all as per Prayag Cat No.7306 or techno commercially equivalent models in Cera /ESSCO complete all as specified and as directed.

S & F in repair stop valve cast copper alloy, screwed down, high pressure with crutch or butterfly handle,15mm bore size screwed both ends for iron pipe or for unions and fittings and fixed all as per Prayag Cat No. 7326 or techno commercially equivalent models in Cera /ESSCO complete all as specified and as directed.

S & F in repair stop valve cast copper alloy, screwed down, high pressure with crutch or butterfly handle, 20mm bore size screwed both ends for iron pipe or for unions and fittings and fixed all as per Prayag or techno commercially equivalent models in Cera /ESSCO complete all as specified and as directed.

S&F in repair 15 mm bore Pillar taps, cast copper alloy fancy type, chromium plated, screwed down high pressure, with or without lettered `Hot' or `Cold' with long screwed shanks and fly-nuts, screwed for iron pipe all as per Prayag Cat No.7302 or techno commercially equivalent models in Cera /ESSCO complete all as specified and as directed.

S&F in repair PVC Ball valves high pressure of PTMT with epoxy coated Aluminium rod & high-density plastic bal screwed for 15 mm bore iron pipe and fixed. (Minimum weight 15mm-142 gms/ 20mm-210 gms/25mm-455gms/ 40mm- 690 gms) all as per Prayag Cat No.151 or techno commercially equivalent models specified in PS complete all as specified and as directed.

S&F in repair PVC Ball valves high pressure of PTMT with epoxy coated Aluminium rod & high-density plastic bal screwed for 20mm bore iron pipe and fixed. (Minimum weight 15mm-142 gms/ 20mm-210 gms/25mm-455gms/ 40mm- 690 gms) all as per Prayag Cat No.152 or techno commercially equivalent models specified in PS complete all as specified and as directed.

S&F PVC connections 15 mm size with PTMT nut of length 450 mm complete all as specified and directed by Engr-in-Charge.

All as per item No 45 above but length 600 mm

S&F in repair cast copper alloy chromium plated shower rose fancy type fixed to 15 mm bore pipe all as per Prayag CERA Cat No.F7010505 or techno commercially equivalent models in Prayag / ESSCO complete all as specified and as directed.

S&F in repair PVC waste pipe flexible type 25 mm dia suitable for couplings 32 mm & 40 mm dia 610 mm long complete all as specified and directed by Engr-in-Charge.

S&F PVC low level flushing cistern (white) of 10 liters capacity with inlet ball float valve, PVC flush pipe and necessary fixing arrangements and connecting to water pipe and WC etc and fixed in repair complete all as specified and directed by Engr-in-Charge.

S& F in repair covers for PVC tanks any make and for capacity upto 1000 ltr with screws incl locking device complete all as specified and directed by Engr-in-Charge.

Demolition and breaking up drain pipes ( salt glazed ware AC/RCC) drain pipes set in cement mortar, dia of pipe 150 mm. complete all as specified and directed by Engr-in-Charge.

Demolition of brick work, PCC block masonery built in cement morter of any type and at any location. complete all as specified and directed by Engr-in-Charge.

M&L for brick work with fly ash bricks straight or curved on plan exc 6 m mean radius complete all as specified and directed by Engr-in-Charge.

M&L for rendering 15 mm thick in CM 1:4 on concrete block masonry surfaces mixed with WPC @ 3% by wt of cement and finished even and smooth without using extra cement. (WPC will be measured and paid separately) complete all as specified and directed by Engr-in-Charge.

M&L Rendering/plastering, 10 mm thick in cement mortar (1:6 )on fair faces of brick work or concrete sur face of wall complete all as specified and directed by Engr-in-Charge.

S&F Collapsible steel gates, top hung, consisting of channel pickets, pivoted flat bars, top and bottom runners, brass handles etc., as specified, erected in position and securing runners with holdfasts and brackets, complete all as specified and directed by Engr-in-Charge.

S&F Steel rolling shutters, with out ball bearing, as specified including top cover, an choring rod, hasp and staple and one shop coat of primer; erected in position as indi cated, complete: but gear operated type with bevel gear box and crank handle complete all as specified and directed by Engr-in-Charge.

S& F 75 mm PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls complete all as specified and directed by Engr-in-Charge.

S& F 110 mm PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls complete all as specified and directed by Engr-in-Charge.

S& F 75 mm PVC (SWR) pipes double socketed in any length with rubber ring joints fixed to walls complete all as specified and directed by Engr-in-Charge.

S& F 110 mm PVC (SWR) pipes double socketed in any length with rubber ring joints fixed to walls complete all as specified and directed by Engr-in-Charge.

S& F 75 mm PVC (SWR) bends any radius complete all as specified and directed by Engr-in-Charge.

S& F 110 mm PVC (SWR) bends any radius complete all as specified and directed by Engr-in-Charge.

S& F 75/110 mm PVC (SWR) Vent cowl complete all as specified and directed by Engr-in-Charge.

S& F 125/110 mm PVC (SWR) 'P’ trap complete all as specified and directed by Engr-in-Charge.

S& F 125/110 mm PVC (SWR) 'S’ trap complete all as specified and directed by Engr-in-Charge.

S & F aluminium powder coated window sliding type (3 track) with frame size 100x35x1.2mm thick and shutter frame size 39.40x17.70x1.2mm thick with and including two glass shutter and one mesh shutter including necessary jointing cleats, glazing clips, rubber packing, powder coated aluminium snap beading screws with and including 4mm thick tinted float glass and 0.36mm dia apperture 1.4mm SS wire mesh and fittings etc complete all as specified and as directed by Engineer-in-Charge.

S & F aluminium louvered ventilators of section size 80mmx20mmx1.50mm including 5mm thick frosted glass fixed in half portion & adjustable type louvers in another half and stainless steel wire mesh fixed type on outside frame etc making to the jambs complete all as specified and as directed by Engineer-in-Charge.

S & F Pressed steel door frame of size 105 x 60mm for doors with one or more rebates including necessary fixing lugs, hings, lock strike plate, etc, complete all as specified and directed by Engr-in-Charge.

S & F 30mm thick IInd class HW glazed and skelton shutter, wire mesh, open rebated and prepared to receive glass, gauze, etc. (without such bars), edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass, etc size of shutters including wire mesh as specified in SSR-I, Section 8.24(a) supplied and fitted to chawkats. complete all as specified and directed by Engr-in-Charge.

S&F 35mm thick plain framed, panelled shutter (two panel) Factory made with lock rail and panel of 9mm B.W.P. commercial ply. The size of rail and stile as per IS : 1003 (Part I), kiln seasoned and chemically pressure treated complete all as specified and directed by Engr-in-Charge.

M&L for preparation of new wooden surfaces of any description, not otherwise described, over 10 cm width or girth and applying two coat synthetic enamel paint over one coat of pink primer etc complete all as specified and directed by Engr-in-Charge.

M&L for preparation of new steel surfaces of any description, not otherwise described, over 10 cm width or girth and applying two coat synthetic enamel paint over a coat of red oxide primer etc complete all as specified and directed by Engr-in-Charge.

S & F in repair stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.4 mm fixed with tinned tack of stainless steel wire staple or wooden beads complete all as specified and directed by Engr-in-Charge.

M & L for preparation of new plasterd or unplastered surfaces of walls and applying two coat of oil bound distemper including Priming plastered and other surfaces with alkali resistant primer complete all as specified and directed by Engr-in-Charge.

M & L for complete removal of existing treatment and preparation of old plastered or unplastered surfaces of wall and applying two coats of cement base paint including Priming plastered and other surfaces with alkali resistant primer complete all as specified and directed by Engr-in-Charge (Make: Super snowcem plus/ Berger/ Asian/ shalimar.) Note:(i) Before applying cement base paint contractor shall use the wire brush and jet spray gun for the complete removal existing treatment and filling of crack using crack sealent. (ii) Application of cement base paint strictly done by spray/mechanical spray machine only.(iii) filling of cracks, holes and dents are includes in the same rates.’ (iv) Proper curing with water to be done before and after application of 1st coat.(v) In case of non adherance of above instructions 30% of cost recovery shall be made from accepted rate of the respective item.

M & L for preparation of old plasterd or unplastered surfaces of ceiling and applying one coat of oil bound distemper over priming surface complete all as specified and directed by Engr-in-Charge.

M & L for preparation of old plasterd or unplastered surfaces of wall and applying one coat of oil bound destemper including Priming plastered and other surfaces with alkali resistant prim complete all as specified and directed by Engr-in-Charge.

All as specified in item No 78 above but applying one coat of white (Lime) wash on ceiling. complete all as specified and directed by Engr-in-Charge.

M&L for 3mm thick wall care putty on wall/ceiling complete all as specified and directed by Engr-in-Charge.

M&L for complete removal of existing treatment and preparation of old plastered surfaces as per manufacturers instructions of wall and applying two coats of water proofing exterior emulsion paint over coats of primer/Base coat as per manufacturers instruction complete all as speicifed and as directed by Engineer-in-Charge.(Make:- Apex Ultima Protek Asian paints, Nerolac exel top guard, berger weateher coat long life 10 yrs) Note:- (i) Before applying weather proof acrylic emulsion paint contractor shall use the wire brush for the complete removal of existing treatment.(ii) filling of cracks, holes and dents are includes in the same rates.(iii) Paint shall be carried out through authorised applicator only and certificate of authorised applicator shall be submitted by contractor before commencement of work.

M & L for complete removal of existing treatment and preparation of old plasterd surfaces of Over head Tank ( upto 21 mtr height) and applying two coats of water proofing exterior emulsion paint over coats of primer/Base coat as per manufacturers instruction complete all as speicifed and as directed by Engineer-in-Charge.(Make:- Apex Ultima Protek Asian paints, Nerolac exel top guard, berger weateher coat long life 10 yrs) Note:- (i) Before applying weather proof acrylic emulsion paint contractor shall use the wire brush for the complete removal of existing treatment.(ii) filling of cracks, holes and dents are includes in the same rates.(iii) Paint shall be carried out through authorised applicator only and certificate of authorised applicator shall be submitted by contractor before commencement of work.

Taking down chowkats and frame n.exc 1.5 Sqm each including shutters without taking off shutters from the frame and removing from site. complete all as specified and directed by Engr-in-Charge.

Taking down chowkats and frame exc 1.5 Sqm but n.exc 4.00 sqm each including shutter wiuthout taking off shutter from the frame and removing from site. complete all as specified and directed by Engr-in-Charge.

Taking down cement plaster from brick or block masonry walls including raking out joints, hacking for key, scrubbing down with water etc. complete all as specified and directed by Engr-in-Charge.

M &L for preparation of new painted wooden surfaces of any description not otherwise described over 10cm width or girth and applyinbg two coat of synthetic enamel paint any tint over pink primer complete all as specified and directed by Engr-in-Charge.

M &L for preparation of old painted wooden surfaces of any description not otherwise described over 10cm width or girth and applyinbg one coat of synthetic enamel paint any tint complete all as specified and directed by Engr-in-Charge.

M&L Machine pressed precast concrete interlocking paver block with rubber moulded any shape and size confirming to IS 15658-2006 of 60 mm thickness, M-35 Grad with grey cement and pigments over & including 25mm sand cushion over 25 mm thick PCC 1:2:4 type B-1 using 20mm graded stone aggregate over sub base ,of approved design & pattern as approved by GE, including demolation complete all as specified and directed by Engr-in-Charge.(Make: NITCO/ Ultra Tiles/Topaz Tiles) Note: Contractor shall produce MTC & independent test certificate of paver block.

M&L Chequered cement concrete tiles rubber moulded 30cm x 30cm x 25mm thick set, jointed and pointed in near cement slurry in floors, with grey cement and pigments over and including 15 mm thick screed bedding in CM 1:6 including demolation complete all as specified and directed by Engr-in-Charge.(Make: NITCO/ Ultra Tiles/Topaz Tiles)

M&L for hardcore of broken stones or boulders of gauge n exc 63mm,deposited,spread,and levelled in layers n exc 15 cm thick,watered,rolled/rammed to true surfacecomplete all as specified and directed by Engr-in-Charge.

M&L for 100mm thick PCC 1:2:4 type B-2 (1:2:4) (40mm graded aggregate) as in leveling course of floor complete all as specified and directed by Engr-in-Charge.

M&L for 25mm thick PCC 1:2:4 type B-1 (1:2:4) (20mm graded aggregate) as in leveling course of floor complete all as specified and directed by Engr-in-Charge.

M&L15-20 mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, win dow-cills, cooking plat forms and like in cement 10 mm thick mortar (1:3) including point ing in white cement (1:2) us ing marble dust with admix ture of pigment to match with shade of granite including demolation complete all as specified and directed by Engr-in-Charge.

S&F in repair MS window guard bars and similar articles confirming to Fe 290 square or round match to existingcomplete all as specified and directed by Engr-in-Charge.

Comman Note for painting items : The following precautionary measures shall be ensured by the contractor during execution of work :- (i) Contractor shall deposit Entire quantity of materials (Proprietory materials) requried for painting works covered under subject contract in the custody of Engineer-In-Charge/ Office in charge of unit. (ii) The materials as required shall be issued to contractor by JE/ Engineer-In-Charge on daily basis and the empty containers/ bags shall be deposited in the store of Engineer -In-Charge by the contractor, for verification as per standard consumption/ coverage prescribed by the manufacturers.(iii) Before applying cement base paint/weather proof acrylic emulsion paint contractor shall use the wire brush and jet spray gun for the complete removal existing treatment and filling of crack using crack sealent. (iv) Application of cement base paint strictly done by spray/mechanical spray machine only.(v) After completion of painting work contractor shall remove and clean all the droplets/stain of paint left on the floor, glasses and joinery. (vi) In case of non adherance of above instructions 30% of cost recovery shall be made from accepted rate of the respective item. Note for the Plumbing and Sanitory Items: (i) Contractor shall deposit Entire quantity of plumbing and satitory wares materials required covered under subject contract in the custody of Engineer-In-Charge/ Office in charge of unit. (ii) The materials as required shall be issued to contractor by JE/ Engineer-In-Charge on daily basis.

VP DEVELOPERS AND CONTRACTOR

JP ENTERPRISES

DARSHAN ENTERPRISES

S.R.M.K Enterprises