Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹31.8 LAccepted-AOC HOUSE NO 102 LANE NO 4 C ANAND NAGAR BOHRI JAMMU 180002 J K | JAMMU | JAMMU AND KASHMIR | 180002 | L1 | Accepted-AOC Due to lowest bidder. | |
| 2 | L2₹37.5 L+₹5.7 L (18.0%)Rejected-Finance CB 288 RING ROAD NARAINA NEW DELHI NEW DELHI 28 | NEW DELHI | DELHI | 110028 | L2 | Rejected-Finance Other than lowest bidder. | |
| 3 | L3₹38.4 L+₹6.6 L (20.8%)Rejected-Finance | L3 | Rejected-Finance Other than lowest bidder. | |
| 4 | L4₹39.4 L+₹7.6 L (23.9%)Rejected-Finance 1170 BENGALI MOHALLA NEAR PRABHAKAR HOSPITAL AMBALA CANTT 133001 | AMBALA | HARYANA | 133001 | L4 | Rejected-Finance Other than lowest bidder. | |
| 5 | L5₹41.4 L+₹9.6 L (30.1%)Rejected-Finance SCHEME NO 07 BLOCK NO 22 FLAT NO 03 NEW GURDASPUR DISTT GURDASPUR PB 143521 | GURDASPUR | PUNJAB | 143521 | L5 | Rejected-Finance Other than lowest bidder. |
| Sl No | Description | Qty | Unit | surinder kumar jindal & bros. L6 | M/S OSHO TRADERS L3 | SUMEET TRADING CORPORATION L1 | Electro Tech Systems L2 | HARPAL ENGINEERS AND BUILDERS L5 | The Rahul Vig L4 |
|---|---|---|---|---|---|---|---|---|---|
| 1.00 | M&L for maintenance free chemical earthing system complete with UL464 approved copper bounded earth rod 17mm dia 3.0 mtrs long electrode buried in ground to bore holes 150mm dia. Vertically to a depth not less than 0.50 mtr below normal ground level including Provision to connect the earth continuity conductor with copper bounded earth rod as per manufacture design or all as directed including 6 kg NABLLAB certified back fill chemical compound for filling bore bole with min 6 kg of Hygroscopic Gel. The ground enhancement chemical my be used in place of back fill compound as required and chemical may be used in place of back fill compound as required and manufacture recommendation to obtain below 1.0 ohms earth resistance value. A layer of 250-300mm soil (vegitable/cotton soil) is also required outside earth bore including necessary ingradients and water during process botain desired value. The earthing strip of size copper 20x3mm up to length of 7.5 mtr up to test point from copper rod is also included test point terminal block should be made of Gun metal or phosphorus bronze size 75x75x25mm drilled and screwed including 3 Nos 8mm long hexagonal head screw complete. The scope indlude iron frame of size 20x20mm fixed with hinged with Pit cover of 300mmx300mm made of cast Iron as per company standard shall be as recommended buy manufacture complete all as specified. Make-JMV/Pargati electrocom/Enove
Note : (i) Payment shall be made only after satisfactory testing to the entire satisfaction of GE. The contractor has to make alternate earthing in case test result not found satisfactory without any extra cost and rate should include the cost of that provision of earthing. (ii) Contractor shall submit 1 years guarantee for earth resistance below 1 ohms and earth neutral voltages less than 1 volts. (iii) Poly plastic of heavy duty, weather proof of 1.5 tonn load capacity of size 320x260 mm also included in quoted rates. | 15 | Each | 18,000 ₹2,70,000 | 15,000 ₹2,25,000 Lowest | 17,000 ₹2,55,000 | 18,000 ₹2,70,000 | 20,000 ₹3,00,000 | 26,000 ₹3,90,000 |
| 2.00 | Material and labour for Copper Strip of 20 x3.0mm to interconnect the earth pit to Equipment Room etc including PVC saddles as per sample approved complete all as specified and directed by Engr-in-Charge | 225 | RM | 250 ₹56,250 Lowest | 290 ₹65,250 | 350 ₹78,750 | 1,100 ₹2,47,500 | 900 ₹2,02,500 | 525 ₹1,18,125 |
| 3.00 | Material & labour for Test point terminal block made of gun metal or phosphorus bronze size 75x75x25mm drilled and screwed including 3 Nos 8mm dia 25mm long hex. Head screw complete all as specified and directed by Engr-in-Charge | 15 | Each | 6,500 ₹97,500 | 300 ₹4,500 Lowest | 800 ₹12,000 | 11,000 ₹1,65,000 | 1,000 ₹15,000 | 800 ₹12,000 |
| 4.00 | M&L for Earthing complete with galvanised steel earth plate electrode 600x600x6mm thick, buried directly in ground (earth pit not less than 2.25 mtrs deep below ground level ) with top edge of the plate not less than 1.5 mtrs below normal ground level, connected to galavanised iron strip 32x6mm as earthing lead by means of bolts, nuts, check nuts and washers of galvanised iron or steel all as shown in electrical plate No 3 connected to outdoor LT panel or bus bar all as specified including earth work in any type of soil, PCC 1:3:6 type C1 chamber & RCC 1:2:4 type B1 cover 40mm thick, with 8mm dia steel deformed (TMT bars) reinforcement at 150mm c/c both ways, 20mm dia GI medium grade pipe for watering , water funnel, complete all as specified and testing on completion. | 15 | Each | 8,800 ₹1,32,000 | 5,000 ₹75,000 | 6,000 ₹90,000 | 15,000 ₹2,25,000 | 7,000 ₹1,05,000 | 4,567 ₹68,505 Lowest |
| 5.00 | Supply and fixing aluminium strip of size 25 x3.15 mm with PVC shaddle and fixing screws etcfor roof and down conductor above ground level complete all as specified and directed by Engr-in-Charge. | 150 | RM | 160 ₹24,000 | 135 ₹20,250 | 140 ₹21,000 | 500 ₹75,000 | 120 ₹18,000 Lowest | 125 ₹18,750 |
| 6.00 | Supply , Installation, testing and commissioning of indoor type of cooled isotation transformer 10 KVA step-III, IS-1180 three phase, metalic body unbalanced type, copper wound with standard fitings and accessiones, input voltage of 415 volt +-5%, output voltage 415 volt +- 5%, IP-42, vector group Dyn-11, of frequency 50Hz and with following description including first fill of transformer Oil IS 335 ISI marked :-
(a) Method of cooling Oil cooled
(b) Rato-1:1
(c) Insulation class-Class E
(d) Winding Temperature-Less than 55 C
(e) Full load losses Less than 5%
(f) No load tosses Less than 0.5%
(h) Potential difference between Earth to Neutral voltage- Less than 01 volt
Nate:- (a) in addtion to the above all standard fittings to be provided as per ISI noms. | 2 | Each | 2,80,000 ₹5,60,000 | 1,18,000 ₹2,36,000 Lowest | 1,20,000 ₹2,40,000 | 1,50,000 ₹3,00,000 | 2,00,000 ₹4,00,000 | 1,75,000 ₹3,50,000 |
| 7.00 | Supply, Installation, testing and commissioning of indoor type of cooled isotation transformer 50 KVA step-III, IS-1180 three phase, metalic body unbalanced type, copper wound with standard fitings and accessiones, input voltage of 415 volt +-5%, output voltage 415 volt +- 5%, IP-42, vector group Dyn-11, of frequency 50Hz and with following description including first fill of transformer Oil IS 335 ISI marked :-
(a) Method of cooling Oil cooled
(b) Rato-1:1
(c) Insulation class-Class E
(d) Winding Temperature-Less than 55 C
(e) Full load losses Less than 5%
(f) No load tosses Less than 0.5%
(h) Potential difference between Earth to Neutral voltage- Less than 01 volt
Nate:- (a) in addtion to the above all standard fittings to be provided as per ISI noms. | 2 | Each | 4,85,000 ₹9,70,000 | 3,20,000 ₹6,40,000 | 2,50,000 ₹5,00,000 Lowest | 2,95,000 ₹5,90,000 | 4,00,000 ₹8,00,000 | 2,85,000 ₹5,70,000 |
| 8.00 | Supply, instalation, testing and commissioning of indoor automatic/servo voltage controller three phase, 50Hz (confirming as per BIS-9815: Part 1: 1994 reaffirmed 2009) Naturally oil cooled of 10 KVA, unbalanced type, copper wound, digital display type, Relay free smooth and slient operation with first filling of Transformer oil having following specification :-
(i) Input Voltage 340-480V or as per ground requirement (ii) Output voltage stabilized at any designed/desired votage 415 +-1% adjustable (iii) No distortion in wave form
(iv) Response time not to exceed 10 mili seconds (v) Sensitivity +-1%
(vi) Rate of conection 8 volt/ second for single phase and 20 volt/second for phase to phase
(vii) No load losses less than 0.5% (vi) Full load losses less than 2.5%.
(ix) Duty cycle continuous 24x7, Emciency more than 95% (x) Type of load 3 Phase, unbalanced type
(xi) Digital display voltmeter and amp meter of suitable rating Protections
(xii) Over load/short circuit protection
(xiii) High/low voltage cut off
(xiv) By pass arrangement in case of emergency (xv) Single phase sequence change protection | 3 | Each | 1,32,000 ₹3,96,000 | 1,15,000 ₹3,45,000 | 1,05,000 ₹3,15,000 | 90,000 ₹2,70,000 Lowest | 90,000 ₹2,70,000 Lowest | 1,75,000 ₹5,25,000 |
| 9.00 | Supply, instalation, testing and commissioning of indoor automatic/servo voltage controller three phase, 50Hz (confirming as per BIS-9815: Part 1: 1994 reaffirmed 2009) Naturally oil cooled of 25 KVA, unbalanced type, copper wound, digital display type, Relay free smooth and slient operation with first filling of Transformer oil having following specification :-
(i) Input Voltage 340-480V or as per ground requirement (ii) Output voltage stabilized at any designed/desired votage 415 +-1% adjustable (iii) No distortion in wave form
(iv) Response time not to exceed 10 mili seconds (v) Sensitivity +-1%
(vi) Rate of conection 8 volt/ second for single phase and 20 volt/second for phase to phase
(vii) No load losses less than 0.5% (vi) Full load losses less than 2.5%.
(ix) Duty cycle continuous 24x7, Emciency more than 95% (x) Type of load 3 Phase, unbalanced type
(xi) Digital display voltmeter and amp meter of suitable rating Protections
(xii) Over load/short circuit protection
(xiii) High/low voltage cut off
(xiv) By pass arrangement in case of emergency (xv) Single phase sequence change protection | 2 | Each | 1,58,000 ₹3,16,000 | 2,10,000 ₹4,20,000 | 1,60,000 ₹3,20,000 | 1,20,000 ₹2,40,000 Lowest | 1,50,000 ₹3,00,000 | 2,50,000 ₹5,00,000 |
| 10.00 | Supply, instalation, testing and commissioning of indoor automatic/servo voltage controller three phase, 50Hz (confirming as per BIS-9815: Part 1: 1994 reaffirmed 2009) Naturally oil cooled of 50 KVA, unbalanced type, copper wound, digital display type, Relay free smooth and slient operation with first filling of Transformer oil having following specification :-
(i) Input Voltage 340-480V or as per ground requirement (ii) Output voltage stabilized at any designed/desired votage 415 +-1% adjustable (iii) No distortion in wave form
(iv) Response time not to exceed 10 mili seconds (v) Sensitivity +-1%
(vi) Rate of conection 8 volt/ second for single phase and 20 volt/second for phase to phase
(vii) No load losses less than 0.5% (vi) Full load losses less than 2.5%.
(ix) Duty cycle continuous 24x7, Emciency more than 95% (x) Type of load 3 Phase, unbalanced type
(xi) Digital display voltmeter and amp meter of suitable rating Protections
(xii) Over load/short circuit protection
(xiii) High/low voltage cut off
(xiv) By pass arrangement in case of emergency (xv) Single phase sequence change protection | 1 | Each | 3,12,000 ₹3,12,000 | 3,20,000 ₹3,20,000 | 2,10,000 ₹2,10,000 | 2,60,000 ₹2,60,000 | 2,00,000 ₹2,00,000 Lowest | 2,85,000 ₹2,85,000 |
Tender Value
₹44.7 L
EMD Value
₹89,320
Closing Date
30 Jul 2025, 6:00 pmClosed
GE AF LEH
GE AF LEH, NEAR POLICE HEAD QUARTER, LEH PIN 194101
PROVN OF EARTHING PITS (CHEMICAL AND CONVENTIONAL), ISOLATION TRANSFORMERS, STABILIZER AND POWER DISTRIBUTION BOX FOR STABILISED POWER SUPPLY AND LED BASED SECURITY LIGHTS AT VARIOUS LOCATION AT AF STN LEH
2025_MES_718153_1
GE(AF)LEH/T-22/2025-26
Open Tender
Electrical and Maintenance Works
Item Rate
180 days
GE AF LEH
Please refer Tender documents.
8 documents required · 8 mandatory
₹500
Yes
GE AF LEH
₹89,320
Yes
6 Sept 2025
2 Jul 2025
1 Aug 2025
2 Jul 2025
30 Jul 2025
16 Jul 2025
2 Jul 2025 - 15 Jul 2025
Amount
M&L for maintenance free chemical earthing system complete with UL464 approved copper bounded earth rod 17mm dia 3.0 mtrs long electrode buried in ground to bore holes 150mm dia. Vertically to a depth not less than 0.50 mtr below normal ground level including Provision to connect the earth continuity conductor with copper bounded earth rod as per manufacture design or all as directed including 6 kg NABLLAB certified back fill chemical compound for filling bore bole with min 6 kg of Hygroscopic Gel. The ground enhancement chemical my be used in place of back fill compound as required and chemical may be used in place of back fill compound as required and manufacture recommendation to obtain below 1.0 ohms earth resistance value. A layer of 250-300mm soil (vegitable/cotton soil) is also required outside earth bore including necessary ingradients and water during process botain desired value. The earthing strip of size copper 20x3mm up to length of 7.5 mtr up to test point from copper rod is also included test point terminal block should be made of Gun metal or phosphorus bronze size 75x75x25mm drilled and screwed including 3 Nos 8mm long hexagonal head screw complete. The scope indlude iron frame of size 20x20mm fixed with hinged with Pit cover of 300mmx300mm made of cast Iron as per company standard shall be as recommended buy manufacture complete all as specified. Make-JMV/Pargati electrocom/Enove Note : (i) Payment shall be made only after satisfactory testing to the entire satisfaction of GE. The contractor has to make alternate earthing in case test result not found satisfactory without any extra cost and rate should include the cost of that provision of earthing. (ii) Contractor shall submit 1 years guarantee for earth resistance below 1 ohms and earth neutral voltages less than 1 volts. (iii) Poly plastic of heavy duty, weather proof of 1.5 tonn load capacity of size 320x260 mm also included in quoted rates.
Material and labour for Copper Strip of 20 x3.0mm to interconnect the earth pit to Equipment Room etc including PVC saddles as per sample approved complete all as specified and directed by Engr-in-Charge
Material & labour for Test point terminal block made of gun metal or phosphorus bronze size 75x75x25mm drilled and screwed including 3 Nos 8mm dia 25mm long hex. Head screw complete all as specified and directed by Engr-in-Charge
M&L for Earthing complete with galvanised steel earth plate electrode 600x600x6mm thick, buried directly in ground (earth pit not less than 2.25 mtrs deep below ground level ) with top edge of the plate not less than 1.5 mtrs below normal ground level, connected to galavanised iron strip 32x6mm as earthing lead by means of bolts, nuts, check nuts and washers of galvanised iron or steel all as shown in electrical plate No 3 connected to outdoor LT panel or bus bar all as specified including earth work in any type of soil, PCC 1:3:6 type C1 chamber & RCC 1:2:4 type B1 cover 40mm thick, with 8mm dia steel deformed (TMT bars) reinforcement at 150mm c/c both ways, 20mm dia GI medium grade pipe for watering , water funnel, complete all as specified and testing on completion.
Supply and fixing aluminium strip of size 25 x3.15 mm with PVC shaddle and fixing screws etcfor roof and down conductor above ground level complete all as specified and directed by Engr-in-Charge.
Supply , Installation, testing and commissioning of indoor type of cooled isotation transformer 10 KVA step-III, IS-1180 three phase, metalic body unbalanced type, copper wound with standard fitings and accessiones, input voltage of 415 volt +-5%, output voltage 415 volt +- 5%, IP-42, vector group Dyn-11, of frequency 50Hz and with following description including first fill of transformer Oil IS 335 ISI marked :- (a) Method of cooling Oil cooled (b) Rato-1:1 (c) Insulation class-Class E (d) Winding Temperature-Less than 55 C (e) Full load losses Less than 5% (f) No load tosses Less than 0.5% (h) Potential difference between Earth to Neutral voltage- Less than 01 volt Nate:- (a) in addtion to the above all standard fittings to be provided as per ISI noms.
Supply, Installation, testing and commissioning of indoor type of cooled isotation transformer 50 KVA step-III, IS-1180 three phase, metalic body unbalanced type, copper wound with standard fitings and accessiones, input voltage of 415 volt +-5%, output voltage 415 volt +- 5%, IP-42, vector group Dyn-11, of frequency 50Hz and with following description including first fill of transformer Oil IS 335 ISI marked :- (a) Method of cooling Oil cooled (b) Rato-1:1 (c) Insulation class-Class E (d) Winding Temperature-Less than 55 C (e) Full load losses Less than 5% (f) No load tosses Less than 0.5% (h) Potential difference between Earth to Neutral voltage- Less than 01 volt Nate:- (a) in addtion to the above all standard fittings to be provided as per ISI noms.
Supply, instalation, testing and commissioning of indoor automatic/servo voltage controller three phase, 50Hz (confirming as per BIS-9815: Part 1: 1994 reaffirmed 2009) Naturally oil cooled of 10 KVA, unbalanced type, copper wound, digital display type, Relay free smooth and slient operation with first filling of Transformer oil having following specification :- (i) Input Voltage 340-480V or as per ground requirement (ii) Output voltage stabilized at any designed/desired votage 415 +-1% adjustable (iii) No distortion in wave form (iv) Response time not to exceed 10 mili seconds (v) Sensitivity +-1% (vi) Rate of conection 8 volt/ second for single phase and 20 volt/second for phase to phase (vii) No load losses less than 0.5% (vi) Full load losses less than 2.5%. (ix) Duty cycle continuous 24x7, Emciency more than 95% (x) Type of load 3 Phase, unbalanced type (xi) Digital display voltmeter and amp meter of suitable rating Protections (xii) Over load/short circuit protection (xiii) High/low voltage cut off (xiv) By pass arrangement in case of emergency (xv) Single phase sequence change protection
Supply, instalation, testing and commissioning of indoor automatic/servo voltage controller three phase, 50Hz (confirming as per BIS-9815: Part 1: 1994 reaffirmed 2009) Naturally oil cooled of 25 KVA, unbalanced type, copper wound, digital display type, Relay free smooth and slient operation with first filling of Transformer oil having following specification :- (i) Input Voltage 340-480V or as per ground requirement (ii) Output voltage stabilized at any designed/desired votage 415 +-1% adjustable (iii) No distortion in wave form (iv) Response time not to exceed 10 mili seconds (v) Sensitivity +-1% (vi) Rate of conection 8 volt/ second for single phase and 20 volt/second for phase to phase (vii) No load losses less than 0.5% (vi) Full load losses less than 2.5%. (ix) Duty cycle continuous 24x7, Emciency more than 95% (x) Type of load 3 Phase, unbalanced type (xi) Digital display voltmeter and amp meter of suitable rating Protections (xii) Over load/short circuit protection (xiii) High/low voltage cut off (xiv) By pass arrangement in case of emergency (xv) Single phase sequence change protection
Supply, instalation, testing and commissioning of indoor automatic/servo voltage controller three phase, 50Hz (confirming as per BIS-9815: Part 1: 1994 reaffirmed 2009) Naturally oil cooled of 50 KVA, unbalanced type, copper wound, digital display type, Relay free smooth and slient operation with first filling of Transformer oil having following specification :- (i) Input Voltage 340-480V or as per ground requirement (ii) Output voltage stabilized at any designed/desired votage 415 +-1% adjustable (iii) No distortion in wave form (iv) Response time not to exceed 10 mili seconds (v) Sensitivity +-1% (vi) Rate of conection 8 volt/ second for single phase and 20 volt/second for phase to phase (vii) No load losses less than 0.5% (vi) Full load losses less than 2.5%. (ix) Duty cycle continuous 24x7, Emciency more than 95% (x) Type of load 3 Phase, unbalanced type (xi) Digital display voltmeter and amp meter of suitable rating Protections (xii) Over load/short circuit protection (xiii) High/low voltage cut off (xiv) By pass arrangement in case of emergency (xv) Single phase sequence change protection
S&F Sheet metal enclosure double door for DBs TPN 4 way 415 Volt having 200 A rated bus bar complete all as specified and directed by Engr-in-charge.
S&F MCB TPN, C Curve type of cap 63 Amps, 415 volts 50 Hz, 10 KA, complete with all accessories as required on site & as directed by engineer-in-charge.
S&F MCB SPN, C Curve type of cap 32 Amps, 240 volts 50 Hz, 10 KA, complete with all accessories as required on site & as directed by engineer-in-charge.
S&F MCB SP, C Curve type of cap 5-32 Amps, 240 volts 50 Hz, 10 KA, complete with all accessories as required on site & as directed by engineer-in-charge.
Supply and fixing LED type Solar street light 50 watt with Auto on/off, Dusk detection 28V, down detection 8V complete with all accessories in built. Solar street light should consist of built in mono crystaline panel of minimum capacity 95 watt (-0/+4W), 12.8V Lithium ferro phospate (LiFePo 4) battery of minium 30 Ah (BIS certified) with inbuilt MPPT charge controller with effifiency more than 90% and PIR sensor with colour temperature 6000-6500K. The battery should have 02 days autonomy with dimming profile. The street light should have ingress protection IP 65 and inpact protection IK 06.
Supply & Fixing timer switch alongwith control panel consisting of digital timer switch for automatic control of street lights for switching ON/OFF control MCB DP 40 Amps, 2 pole, 10KA, LED indicator lamp, Auto/Manual control with switch, over current protection relay, short circuit protection relay, control wiring, 240 volts, AC supply system. The DB shall be made of MS sheet 2mm thick with front openeable door and on/off switch provided on the door alongwith indicator lamps. The timer shall be mount on pole with two Nos of FI clamps, nuts, bolts and washers complete all as directed and specified.
Supply and fix Steel tubular swaged poles complete with cast iron base plate, finial taper plug, bolts, nuts and screws as specified type 410 SP-22 (8.5 metres long) complete all as specified and directed by Engr-in-Charge.
Supply install, test and commissioning of Outdoor type LT Panel Board cubical type outdoor Confirming to IS 8623/Rel IS , floor mounted factory fabricated made out of 3.15 mm thick CRCA sheet CPRI approved dust proof/vermin proof & suitable size to accomodate all accessories/fittings, compartmentalized in construction to accommodate incoming and Outgoing MCCB, MCB and TPN copper bus bars of rating not less 1.5 times the rated cap of incomer Outgoing MCCB / ACB and outgoing feeder. The TPN bus bars shall be insulated with colour coded heat shrinkable sleeve and shall be mounted on DMC/epoxy insulator of size not less than 50 x 50 mm conical type at an interval of not more than 500 mm through out the length of the TPN bus bar . The incoming as well as outgoing Outgoing MCCBs shall have copper extension links of current carrying cap not less than 1.5 times the rated capacity of individual feeders. The extension links shall be supported on DMC / Epoxy insulators having provision for termination of incoming and out going cables. All extension links /interconnection shall be insulated with heat shrinkable colour coaded sleeves. The cubicle shall have a bottom channel of size as designed by the manufacturer . A detachable predrilled gland plate of thickness not less than 3 mm thick should be used at the bottom for entry of armoured cable of adequate size with glands.The above panel shall be front and back openable lockable /openable by key from both side and shall have louvers and air vent gasket for natural flow of air.3 mm XLPE adhesive type gasket shall be used to make panel weather, dust and vermin proof with IP65 degree of protection , complete as specified and consisting the following switchgears and accessories:
(a) Bus bar made up of copper with heat shrikable sleeves with colour code supported on epoxy resin based insulators, 4 strips of suitable length for current rating 400 amps. (b) Main Incoming MCCB four pole 415 V AC, current rating 200 amps adjustable type with breaking capacity 36 KA at 415V with thermal magnetic release-01 Nos (c) Outgoing MCCB 415 V AC, current rating 125 amps,breaking cap 25 KA at 415 V AC = 02 Nos (d) Outgoing MCCB 415 V AC, current rating 63 amps,breaking cap 16 KA at 415 V AC = 02 Nos (e) Digital Ammeters 96x96 mm with suitable CT ratio (f) Phase Indiactor lamp -01 Set (g) Digital Volt meter (h) PCC 1:3:6 for grounting 04 legs of LT Panel 45 cm deep below GL all as specified and directed by Engineer in charge
S & L cable XLPE insulated screened PVC bedded galvanized steel strip wire armoured electric power cables heavy duty with standard aluminium conductor,1100 volts grade,cross sectional area 95 sq mm 3½ core complete all as specified and directed by Engr-in-Charge.
S & L cable XLPE insulated screened PVC bedded galvanized steel strip wire armoured electric power cables heavy duty with standard aluminium conductor,1100 volts grade,cross sectional area 35 sq mm 3½ core complete all as specified and directed by Engr-in-Charge.
Electro Tech Systems (BID ID -3366404)
M/S OSHO TRADERS (BID ID -3376651)
The Rahul Vig (BID ID -3377718)
HARPAL ENGINEERS AND BUILDERS (BID ID -3377790)
surinder kumar jindal & bros. (BID ID -3368468)
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .