ANNUAL MAINTENANCE CONTRACT FOR RESIDENTIAL COMPLEX OF MAHANADI DIVISION CWC BURLA FOR 1 YEAR

Amount

Collecting garbage from different place of office compound and disposal of the same as the muncipality (Approx 10Km by suitable mechanical arrrangement (tractor) in loading and unloading complete with all leads as per director of Engineer-In-Charge garbage shall be covered properly and tied in order to avoid any slippage . Twice Monthly

Suppling and stacking of good earth at site including royality and carriage complete.

Supplying of manure and pesticides /insecticides as per direction of Engineer-In-Charge.

Supply of sapling /seeding of seasonal flower plants to site for as per instruction of Engineer in Charge.

Cleaning of overhead sintex tank twice in year including all labour and material etc complete.

Cleaning of septic tank and diposal of waste material of division office and residential complex as and when required.

Cleaning of chocked sewer line by diesel running vehicle mounting hydraulic operated high pressure suction cum jetting sewer cleaning machine fitted with pump having 4000 litres suction capacity and 6000 litres water jetting tank capacity including skilled operator, supervising engineer etc. for cleaning and partial desilting of manholes and dechocking of sewer lines. Dechocking and flushing of sewer line from one manhole to another by high pressure jetting system of 2200 PSI for sewer line from 150mm dia upto 300mm

Repair and maintenance of concrete drain line of division and Residential complex with cement concrete 1:1.5:3 as when as required. ( Based on actual work)

Repair and maintenance of concrete drain line of division and Residential complex with 12 mm cement plaster of mix 1:4 (1 cement: 4 fine sand)

Repair and maintenance of concrete drain line of division and Residential complex with Brick work with common burnt clay modular bricks of class designation 7.5 in foundation and plinth in: Cement mortar 1:4 (1 cement : 4 coarse sand)

Renewing glass panes, with putty and nails wherever necessary including racking out the old putty:Float glass panes of nominal thickness 4 mm (weight not less than 10kg/sqm)

Providing and fixing aluminium sliding door bolts, ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868), transparent or dyed to required colour or shade, with nuts and screws etc. complete :250x16 mm9.96.2

Flushing Cistern P.V.C. 10 litre capacity (low level) (White) (with fittings, accessories and flush pipe)

Providing and fixing white vitreous china pedestal type (European type/ wash down type) water closet pan

Providing and fixing solid plastic seat with lid for pedestal type W.C. pan complete: White solid plastic seat with lid

Providing and fixing white vitreous china wash basin including making all connections but excluding the cost of fittings :Flat back wash basin of size 550x400mm

Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) :25 mm nominal bore

Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) :32 mm nominal bore

Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) :40mm nominal bore

Fixing of electricity problem of Division office and Residentialcomplex as when as required.

Providing and fixing G.I. pipes complete with G.I. fittings and clamps, i/c cutting and making good the walls etc.Internal work - Exposed on wall 25 mm dia nominal bore

Semi Rigid PVC waste pipe for sink and wash basin 32 mm dia with length not less than 700 mm i/c PVC waste fittings

Providing and fixing bath shower of standard brand like Gaguar or equivalent

Providing and fixing brass bib cock of approved quality 15 mm nominal bore

Providing and fixing brass stop cock of approved quality 15 mm nominal bore

Providing and fixing C.P. brass bib cock of approved quality conforming to IS:8931 15 mm nominal bore

Providing and fixing C.P. brass long body bib cock of approved quality conforming to IS standards and weighing not less than 690 gms.15 mm nominal bore

Providing Jaguar make or approved equivalent CP brass health faucet with tube complete set as per instruction ot Engineer-in-Charge.

Providing G I union socket-25 mm dia of approved quality as per instruction of Engineer- in-charge.

Supply and fixing of Multi-coloured fountain LED light with water proof

Supply and fixing of Multi-coloured fountain LED light with water proof

Providing and Fixing of aluminium door with Glazing and all accessories etc complete as when as required.