Dismantling, diversion and augmentation of existing HT and LT feeders emerging from substation no. 1 and 3 for ensuring connecting with New upcoming substation no. 3, 2 and 1 at Kusmunda Project.

Amount

Description of Work

Supplying and erection of galvanised stay set for 11 KV over head lines complete with 19/20 mm dia X 1.8 metres long stay rod, anchor plate of size 45 cm X 45 cm X 7.5 mm thick, thimble, stay clamps, turn buckle (20 mm X 600 mm), 7/4.00 mm dia G.I stay wire and 11 KV strain insulator etc. in cement concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 40 mm nominal size) foundation including excavation and refilling etc. as required

Shifting of materials other than pole upto pole pit and back to workshop

Transportation of pole from road side to pole pits and back to workshop

Erection of metallic poles of following length above 11 mts and upto 13 mtrs on cement concrete @ 1 cement, 3 erection of metallic pole of following length in cement concrete 1:3:6 (1 cement : 3 coarse sand :6 graded stone aggregate 40 mm nominal size) foundation including excavation and refilling etc. as required (0.48 cum concreting per pole)

Stringing of DOG Conductor (3 wire) (Conductor will be provided by department)

Stringing of Rabbit Conductor (3 phase 5 wire) (conductor will be provided by department)

Supplying and erection of 11 KV pin insulator complete with large steel head G.I pin, nuts, washers etc. as required.

Supplying and erection of 11 KV disc insulator polymer type for 11 KV over head lines with galvanised insulator fittings, ball and socket type and complete with galvanised strain clamps, bolts, nuts, washers etc. as required.

Supplying and erection of galvanised 'D' iron clamps complete with shackle insulator (75 mm X 90 mm), G.I bolts, nuts and washers, coach screws etc. as required.

Making of clamps.

Erection of pole top/straight two wire/ V shape two wire, angle iron/ channel iron, cross arm on steel tubular/ rail/ PCC pole for 11/22/33 KV as required.

Fabrication of Brackets

Erection of double pole 3 wire cross arm for 11 KV/ 22 KV/ 33 KV overhead lines as required. (Angles/channels will be provided by the department.

Carpet guarding. (GI wire will be given departmentally.)

Painting of Hardware and numbering of poles including steel pole.

Supplying and fixing of 32 mm dia X 2.00 metres long G.I. pipe (medium class bracket for mounting of fluorescent/ HPMV/HPSV street light fitting on pole including bending the pipe to the required shape, 2 nos 40 mm X 3 mm flat iron clamps with nuts, bolts and washer, painting the flat iron with primer and finish paint etc. as required.

Earthing with G.I earth plate 600mm X 600 mm X 6 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 metre long etc. (but without charcoal/coke and salt) as required.

Dismantling of pole/ street light standard/ strut embedded in brick ballast foundation etc. as required.

Total impact of GST for the purpose of CTC

MS R.P. JAISWAL

M/S. SHIV SHANKAR ELECTRICAL CIVIL ENGINEERING