SUPPLY AND FIXING OF FURNITURE AT NEW EXECUTIVE HOSTEL BUILDING AT HCM RIPA JAIPUR

Amount

Reception Counter : Providing and placing Receiption Counter of size 3300mm x 900mm x 1050mm made up of 18mm thick ISI mark MR Plywood. The counter shall have two tops i.e. one at 750mm (working top) and other at 1050mm height from floor. Working Top thickness 368mm made of 18mm thick plywood and having 150mmx18mm wide collar on all four sides underneath the top finished with 36mmx10mm teak wood lipping. Side/ vertical partition panels 36mm thick (18+18mm) made of two layers 18mm plwood finished with 36mmx10mm teak wood lipping. Modesty panel made of 18mm thick plywood. All Surface shown in light shade to be finished with 1mm thick laminate on both sides and all surface shown in dark shade to be finshed with 12mm thick corian as marked in the detailed drawing. 12mm corian sheet shall be pasted on 18mm thick plywood where-ever applicable. Pedestal Storage Cabinet 02 nos. of size 450x450x712mm with 03 Drawers made up of 18mm thick ISI mark MR Plywood. Top & Sides made of 18mm thick plywood finished with 18mmx10mm teak wood lipping. Drawer front/side/back made with 18mm thick plywood & drawer base in 9mm thick plywood. Drawers with 14” telescopic channels of approved brand, Handles in antique finish 130mm & locks on all drawers to be provided of approved brand. Keyboard Tray 01 nos. to be provided. Teak wood lipping to be finished with melamine polish. The cost is inclusive of all labour and material etc. complete in all respect as per drawing and direction given by Engineer in charge. Please refer drawings for more details.

Sofa 4 Seater : Providing and placing 4-seater sofa of size 2400 mmX800 mm X750 mm (LxDxH) made up of seasoned and chemically treated Sheesham solid wood with melamine polish of approved shade. Seating Height from Ground– 450mm. The sofa shall have both side arms of size 100mm x 28mm, seat bottom frame size 150mm x 28mm, tapered front legs 80mmx38mm, tapered back legs 50mmx38mm, arm rest vertical support 60mmx28mm, back rest horizontal frames 80mmx28mm (02 nos.) The base frame shall have 03 nos. wooden supports of size 60mmx28mm. Seat foam shall be 32 density 120mm thick which is a combination 24mm 32 Density Supersoft foam + 96mm 32 Density foam to be pasted on a separate hardwood framing made from 80mmx18mm wood and each hardwood frame shall have 3 nos. of S- Springs running across front to back and 04 nos. of elastic bands (niwar) running across the length. The sofa shall have 04 nos. loose back cushion having thickness 96mm (530x400x96mm) which is a combination of 24mm 32 Density Supersoft foam + 72mm 32 Density foam. Seat and back cushions to be covered with good quality fabric (of approx. Rs 400 per mtr) of approved colour and texture. Good quality plastic bufferes to be provided on all legs. The cost is inclusive of all labour and material etc. complete in all respect as per drawing and direction given by Engineer in charge. Please refer drawings for more details.

Sofa 3 Seater : Providing and placing 3-seater sofa of size 1850 mmX800 mm X750 mm (LxDxH) made up of seasoned and chemically treated Sheesham solid wood with melamine polish of approved shade. Seating Height from Ground– 450mm. The sofa shall have both side arms of size 100mm x 28mm, seat bottom frame size 150mm x 28mm, tapered front legs 80mmx38mm, tapered back legs 50mmx38mm, arm rest vertical support 60mmx28mm, back rest horizontal frames 80mmx28mm (02 nos.) The base frame shall have 02 nos. wooden supports of size 60mmx28mm. Seat foam shall be 32 density 120mm thick which is a combination 24mm 32 Density Supersoft foam + 96mm 32 Density foam to be pasted on a separate hardwood framing made from 80mmx18mm wood and each hardwood frame shall have 3 nos. of S- Springs running across front to back and 04 nos. of elastic bands (niwar) running across the length. The sofa shall have 03 nos. loose back cushion having thickness 96mm (530x400x96mm) which is a combination of 24mm 32 Density Supersoft foam + 72mm 32 Density foam. Seat and back cushions to be covered with good quality fabric (of approx. Rs 400 per mtr) of approved colour and texture. Good quality plastic bufferes to be provided on all legs. The cost is inclusive of all labour and material etc. complete in all respect as per drawing and direction given by Engineer in charge. Please refer drawings for more details.

Sofa 2 Seater : Providing and placing 2-seater sofa of size 1300 mmX800 mm X750 mm (LxDxH) made up of seasoned and chemically treated Sheesham solid wood with melamine polish of approved shade. Seating Height from Ground– 450mm. The sofa shall have both side arms of size 100mm x 28mm, seat bottom frame size 150mm x 28mm, tapered front legs 80mmx38mm, tapered back legs 50mmx38mm, arm rest vertical support 60mmx28mm, back rest horizontal frames 80mmx28mm (02 nos.) The base frame shall have 01 no. wooden supports of size 60mmx28mm. Seat foam shall be 32 density 120mm thick which is a combination 24mm 32 Density Supersoft foam + 96mm 32 Density foam to be pasted on a separate hardwood framing made from 80mmx18mm wood and each hardwood frame shall have 3 nos. of S- Springs running across front to back and 04 nos. of elastic bands (niwar) running across the length. The sofa shall have 02 nos. loose back cushion having thickness 96mm (530x400x96mm) which is a combination of 24mm 32 Density Supersoft foam + 72mm 32 Density foam. Seat and back cushions to be covered with good quality fabric (of approx. Rs 400 per mtr) of approved colour and texture. Good quality plastic bufferes to be provided on all legs. The cost is inclusive of all labour and material etc. complete in all respect as per drawing and direction given by Engineer in charge. Please refer drawings for more details.

Coffee Table : Providing and placing Coffee Table of size 1000 mm x 1000 mm x 400 mm (LxDxH) made up of seasoned and chemically treated Sheesham solid wood with melamine polish of approved shade. The table shall have 10 mm thick clear toughened glass with edge polishing resting on wooden battens of size 28x28mm placed between top wood frames. Top Frame 02 nos. size 1000mmx 85mmx38mm, Legs 04 nos. size 400mm x 85mm x 38mm. Legs connected with horizontal frames 04 nos. of size 75mmx28mm connected with 02 nos. wooden supports of 28mmx28mm underneath the glass. Base shelf made from 12mm thick sheesham veneered plywood (8mm+4mm) connected to legs with 04 nos. 40mmx28mm sheesham wood battens. Good quality plastic bufferes to be provided on all legs. The cost is inclusive of all labour and material etc. complete in all respect as per drawing and direction given by Engineer in charge. Please refer drawings for more details.

Coffee Table : Providing and placing Coffee Table of size 800 mm x 800 mm x 400 mm (LxDxH) made up of seasoned and chemically treated Sheesham solid wood with melamine polish of approved shade. The table shall have 10 mm thick clear toughened glass with edge polishing resting on wooden battens of size 28x28mm placed between top wood frames . Top Frame 02 nos. size 800mmx 85mmx38mm, Legs 04 nos. size 400mm x 85mm x 38mm. Legs connected with horizontal frames 04 nos. of size 75mmx28mm connected with 02 nos. wooden supports of 28mmx28mm underneath the glass. Base shelf made from 12mm thick sheesham veneered plywood (8mm+4mm) connected to legs with 04 nos. 40mmx28mm sheesham wood battens. Good quality plastic bufferes to be provided on all legs. The cost is inclusive of all labour and material etc. complete in all respect as per drawing and direction given by Engineer in charge. Please refer drawings for more details.

Coffee Table :Providing and placing Coffee Table of size 600 mm x 600 mm x 500 mm (LxDxH) made up of seasoned and chemically treated Sheesham solid wood with melamine polish of approved shade. The table shall have 10 mm thick clear toughened glass with edge polishing resting on wooden battens of size 28x28mm placed between top wood frames . Top Frame 02 nos. size 600mmx 85mmx38mm, Legs 04 nos. size 400mm x 85mm x 38mm. Legs connected with horizontal frames 04 nos. of size 75mmx28mm connected with 02 nos. wooden supports of 28mmx28mm underneath the glass. Base shelf made from 12mm thick sheesham veneered plywood (8mm+4mm) connected to legs with 04 nos. 40mmx28mm sheesham wood battens. Good quality plastic bufferes to be provided on all legs. The cost is inclusive of all labour and material etc. complete in all respect as per drawing and direction given by Engineer in charge. Please refer drawings for more details.

Working Desk : Providing and placing Working Desk of size 2000mm x 900mm x 750mm made up of 18mm thick ISI mark MR Plywood. Top thickness 36mm made of 18mm thickplywood and having 150mmx18mm wide collar on all four sides underneath the top finished with 36mmx10mm teak wood lipping. Side panels 36mm thick (18+18mm) made of two layers 18mm plywood finished with 36mmx10mm teak wood lipping. Modesty panel height 730mm made of 18mm thick plywood. All exposed surface finished with 1mm thick laminate and non-exposed surface to be finsihed with melamine polish. Teak wood lipping to be finished with melamine polish. Clear Glass 8mm thick with edge polishing to be provided on the top. The cost is inclusive of all labour and material etc. complete in all respect as per drawing and direction given by Engineer in charge. Please refer drawings for more details.

Pedestal Storage Cabinet : Providing and placing Pedestal Storage Cabinet of size 450x450x700mm with 03 Drawers made up of 18mm thick ISI mark MR Plywood. Top/Base/Sides made of 18mm thick plywood finished with 18mmx10mm teak wood lipping. Drawer front/side/back made with 18mm thick plywood & drawer base in 9mm thick plywood. Drawers with 14” telescopic channels of approved brand, Handles in antique finish 130mm & locks of approved brand to be provided. All exposed surface finished with 1mm thick laminate and non-exposed surface to be finished with 0.8mm thick laminate of approved shade and brand. Teak wood lipping to be finished with melamine polish. The cost is inclusive of all labour and material etc. complete in all respect as per drawing and direction given by Engineer in charge. Please refer drawings for more details.

Side Storage Unit : Providing and placing Side Storage Unit of size 1050x450x750mm made up of 18mm thick ISI mark MR Plywood. Top & Sides made of 18mm thick plywood finished with 36mmx18mm teak wood lipping. Cabinet Base /Shelf / Vertical Partition / Shutter made with 18mm thick plywood finished with 18mmx10mm teak wood lipping. Cabinet back made with 9mm thick plywood. All exposed surface finished with 1mm thick laminate and non-exposed surface to be finished with 0.8mm thick laminate of approved shade and brand. Teak wood lipping to be finished with melamine polish. Clear Glass 8mm thick with edge polishing to be provided on the top. S.S. Hinges (75x12x30mm), Locks, magnet catcher, Handles in antique finish (130mm) & Tower Bolt (75mm) of approved brand to be provided. The cost is inclusive of all labour and material etc. complete in all respect as per drawing and direction given by Engineer in charge. Please refer drawings for more details.

Book Rack : Providing and placing Book Rack of size 900x400x1800mm made up of seasoned and chemically treated Sheesham solid wood with melamine polish of approved shade. Sheesham Wood Top/ Shelves 03 nos./ Base/ side panel/ shutter thickness 18mm, Legs 28x40mm and vertical battens on sides 18x18mm. Top & Base Front/side horizonal frames made of 40x28mm wood. Shelf front/side horizontal frames made of 30x28mm wood. Back made up of 8mm thick ISI Mark MR grade plywood finshed with melamine polish. S.S. Hinges (75x12x30mm), Locks, Handles in antique finish (130mm), magnet catcher & Tower Bolt (75mm) of approved brand to be provided. The cost is inclusive of all labour and material etc. complete in all respect as per drawing and direction given by Engineer in charge. Please refer drawings for more details.

Executive Revolving Chair Mid Back : Providing and placing Executive Revolving Chair Mid Back of size 763Lx763Dx855H to 975Hmm. The seating height of the chair ranges from 425mm to 545mm from floor. Seat / Back assembly : The seat & back are made up of 12mm thick hot pressed plywood and upholstered with fabric upholstery covers and moulded polyurethane foam of density 40 kg/m3. The back foam of density 40 kg/m3 is designed with contoured lumber support for extra comfort. Armrest : The one piece armrests are injection moulded from black Polypropylene. Centre Tilt Mechanism : The mechanism is designed with features such as 360 degree revolving type, upright position locking back, seat / back tilt adjustment. The chair shall have Pneumatic Height adjustment of 100mm. The bellow is 3 piece telescopic type and injection moulded in black polypropylene. The pedestal assembly is injection moulded in black glass filled nylon and fitted with 05 nos. of twin wheel castors which are injection moulded in black nylon. The cost is inclusive of all labour and material etc. complete in all respect as per drawing and direction given by Engineer in charge. Please refer drawings for more details.

Chair : Providing and placing Executive Revolving Chair Mid Back of size 614Lx645Dx895H. The seating height of the chair is 465mm from floor. Seat / Back assembly : The seat & back are made up of 12mm thick hot pressed plywood and upholstered with fabric upholstery covers and moulded polyurethane foam of density 40 kg/m3. The back foam of density 40 kg/m3 is designed with contoured lumber support for extra comfort. Armrest : The one piece armrests are injection moulded from black Polypropylene. Tubular Frame : The powder coated tubular frame is cantilever type and made of dia 25mm x 2mm thick M.S. ER. W. Tube. The cost is inclusive of all labour and material etc. complete in all respect as per drawing and direction given by Engineer in charge. Please refer drawings for more details.

Conference Table : Providing and placing Conference Table of size 2100mm x 600mm x 750mm made up of 18mm thick ISI mark MR Plywood. Top 36mm thick made from 18mm thick plywood and having 100mmx18mm wide collar underneath on all four sides finished with 36mmx10mm teak wood lipping. Side panel width 450mm made up of 18mm thick plywood finished with 18mmx10mm teak wood lipping. Modesty panel height 600mm made of 18mm thick plywood. Footrest 150mm wide made from 18mm thick plywood running across the length of the table. All exposed surface finished with 1mm thick laminate and non-exposed surface under the top finished with melamine polish. Teak wood lipping to be finished with melamine polish. The cost is inclusive of all labour and material etc. complete in all respect as per drawing and direction given by Engineer in charge. Please refer drawings for more details.

Conference Table : Providing and placing Conference Table of size 1400mm x 600mm x 750mm made up of 18mm thick ISI mark MR Plywood. Top 36mm thick made from 18mm thick plywood and having 100mmx18mm wide collar underneath on all four sides finished with 36mmx10mm teak wood lipping. Side panel width 450mm made up of 18mm thick plywood finished with 18mmx10mm teak wood lipping. Modesty panel height 600mm made of 18mm thick plywood. Footrest 150mm wide made from 18mm thick plywood running across the length of the table. All exposed surface finished with 1mm thick laminate and non-exposed surface under the top finished with melamine polish. Teak wood lipping to be finished with melamine polish. The cost is inclusive of all labour and material etc. complete in all respect as per drawing and direction given by Engineer in charge. Please refer drawings for more details.

Conference Table : Providing and placing Conference Table of size 1400mm x 600mm x 750mm made up of 18mm thick ISI mark MR Plywood. Top (hexagonal shape) 36mm thick made from 18mm thick plywood and having 100mmx18mm wide collar underneath on all four sides finished with 36mmx10mm teak wood lipping. Side panel width 450mm made up of 18mm thick plywood finished with 18mmx10mm teak wood lipping. Modesty panel height 600mm made of 18mm thick plywood. Footrest 150mm wide made from 18mm thick plywood running across the length of the table. All exposed surface finished with 1mm thick laminate and non-exposed surface under the top finished with melamine polish. Teak wood lipping to be finished with melamine polish. The cost is inclusive of all labour and material etc. complete in all respect as per drawing and direction given by Engineer in charge. Please refer drawings for more details.

TV/Storage Unit : Providing and placing TV/Storage Unit of size of size 1780 x400x900mm with 03 Drawers made up of seasoned and chemically treated Sheesham solid wood with melamine polish of approved shade. Sheesham Wood Top/Shelf/Base/Side panels/ Inside Vertical Partitions/Drawer front panels/Shutter thickness 18mm, Legs 60x38mm, front/side/back horizontal frame size 40mmx28mm, cabinet back panel in 9mm thick ISI Mark MR plywood. Drawer side/back panels made with 18mm thick ISI mrk MR plywood & base in 9mm thick ISI mark MR plywood. Clear Glass 8mm thick with edge polishing to be provided on the top. Telescopic channel 14" to be provided on drawers, S.S. Hinges (75x12x30mm), Locks on shutter, magnet catcher, Handles in antique finish (130mm) & Tower Bolt (75mm) of approved brand to be provided. The cost is inclusive of all labour and material etc. complete in all respect as per drawing and direction given by Engineer in charge. Please refer drawings for more details.

Classroom Desk With Storage Shelf & Foot Rest : Providing and placing Classroom Desk With Storage Shelf & Foot Rest of size 1550mm x 525mm x 750mm made up of 18mm thick ISI mark MR Plywood. Top/Side/Shelf/Modesty Panel/Foot Rest/Storage Vertical Partition made from 18mm thick plywood and finished with 18mmx10mm teak wood lipping. Top/Side panel width 525mm, Shelf depth 300mm, Modesty Panel height 450mm & Foot Rest width 150mm with adequate wooden support underneath . All exposed surface finished with 1mm thick laminate and non-exposed surface to be finished with 0.8mm thick laminate. Teak wood lipping to be finished with melamine polish. Heavy duty plastic buffers to be provided. The cost is inclusive of all labour and material etc. complete in all respect as per drawing and direction given by Engineer in charge. Please refer drawings for more details.

Classroom Desk With Storage Shelf & Foot Rest : Providing and placing Classroom Desk With Storage Shelf & Foot Rest of size 2400mm x 525mm x 750mm made up of 18mm thick ISI mark MR Plywood. Top/Side/Shelf/Modesty Panel/Foot Rest/Storage Vertical Partition made from 18mm thick plywood and finished with 18mmx10mm teak wood lipping. Top/Side panel width 525mm, Shelf depth 300mm, Modesty Panel height 450mm & Foot Rest width 150mm with adequate wooden support underneath. All exposed surface finished with 1mm thick laminate and non-exposed surface to be finished with 0.8mm thick laminate. Teak wood lipping to be finished with melamine polish. Heavy duty plastic buffers to be provided. The cost is inclusive of all labour and material etc. complete in all respect as per drawing and direction given by Engineer in charge. Please refer drawings for more details.

Dining Table : Providing and placing Dining Table size 1780mm x 750mm x 750mm made up of seasoned and chemically treated Sheesham solid wood with melamine polish of approved shade. Table Top made up of 18mm thick sheesham wood, Frame 02 nos. size 1600mmx 85mmx28mm & 02 nos. 570mmx85mmx28mm. Legs 04 nos. size 732mm x 90mm x 90mm tapering down to 70x70mm at the bottom. The table shall have 02 nos. size 60mmx28mm supports under the table top running parallel to the width of top. The table shall have 10 mm thick clear glass with edge polishing placed on the top. Heavy duty plastic buffers to be provided. The table legs shall be fixed to the frame with M.S. angle brackets (dub sets) with double bolt. The cost is inclusive of all labour and material etc. complete in all respect as per drawing and direction given by Engineer in charge. Please refer drawings for more details.

Dining Chair : Dining Chair : Providing & placing of Dining chair overall size : 450L x 480D x 1000H mm made up of seasoned and chemically treated Sisam solid wood with Melamine polish of approved shade. Front legs of 55x55 mm thick tapered to 40x40 mm at the bottom. Back legs measuring size 40x40 mm at the centre point gradually tapering down to 40x20mm at top. Chair backrest with 7 nos. of vertical members of size 30x18mm fixed at equal gaps between the two back legs. Backrest horizontal curved frame total 2 nos. visible above seat are of size 65mmx18mm/55mmx18mm respectively. Seat inner frame of size 40mmx18mm total 4 nos. with adequate corner supports covered with upholstery. Connecting frame as support between front and back legs will be of size 40mmx28mm to be fixed on sides only. Seat foam thickness to be 48mm made up of 32 density PU foam of approved brand. Total seat thickness will be 88 mm covered with good quality fabric @Rs.400 per mtr. cost in approved colour and texture. Chair seat to have a 12 mm MR plywood base underneith the foam. Total sitting height from floor till seat to be 460mm and backrest above seat to measure 540mm in height. Heavy duty plastic bufferes to be provided. The cost is inclusive of all labour and material etc. complete in all respect as per drawing and direction given by Engineer in charge. Please refer drawings for more details.

Dining Table : Providing and placing Dining Table size 2400mm x 1050mm x 750mm made up of seasoned and chemically treated Sheesham solid wood with melamine polish of approved shade. Table Top made up of 28mm thick sheesham wood, Frame 02 nos. size 2100mmx 100mmx28mm & 02 nos. 750mmx100mmx28mm. Legs 04 nos. size 722mm x 150mm x 150mm tapering down to 120x120mm at the bottom. The table shall have 03 nos. size 80mmx28mm supports under the table top running parallel to the width of top. The table shall have 10 mm thick clear glass with edge polishing placed on the top. Heavy duty plastic buffers to be provided. The table legs shall be fixed to the frame with M.S. angle brackets (dub sets) with double bolt. The cost is inclusive of all labour and material etc. complete in all respect as per drawing and direction given by Engineer in charge. Please refer drawings for more details.

Dining Chair : Providing & placing of Dining chair overall size : 450L x 500D x 1000H mm made up of seasoned and chemically treated Sisam solid wood with Melamine polish of approved shade. Front legs of chair to measure 55x55 mm thick tapered to 35x35 mm at the bottom. Back legs measuring size 45x40 mm at the centre gradually tapering down to 35x35mm at the bottom. Chair backrest to have 12mm plywood base upholstered using 25mm PU foam on inside of backrest covered all with fabric . Seat foam thickness to be 48mm made up of 32 density PU foam of premium brand covered with good quality fabric @Rs.400 per mtr. cost in approved colour and texture. Chair seat to have a 12 mm MR plywood base underneith the foam. Total sitting height from floor till seat to be 460mm and backrest above seat to measure 540mm in height. Backrest to have a exposed wood frame on top measuring 430mmx80mmx25mm with cut out section in the middle. Exposed frames below the seat to measure 55mmx28mm on all four sides with adequate corner support inside. Seat & backrest to have pipin detailing on upholstery as shown in reference picture. Heavy duty plastic buffers to be provided. The cost is inclusive of all labour and material etc. complete in all respect as per drawing and direction given by Engineer in charge. Please refer drawings for more details.

Serving Counter : Providing and placing Serving Counter with Granite top having 4 nos. of drawers with overall size 1780 x400x750mm made up of seasoned and chemically treated Sheesham solid wood with melamine polish of approved shade. Sheesham Wood Shelf/Base/Side panels/Vertical Partitions/Drawer front panel thickness 18mm, Legs 60x38mm, front/side/back horizontal frame size 40mmx28mm, cabinet back panel in 9mm thick MR plywood. Drawer side/back panels made with 18mm thick MR Plywood & base in 9mm thick MR plywood. Granite 18mm thick of approved shade with edge polishing to be provided on the top. 14” telescopic channels & handles 130mm to be provided on drawers. Plastic buffers to be provided under legs. The cost is inclusive of all labour and material etc. complete in all respect as per drawing and direction given by Engineer in charge. Please refer drawings for more details.

Coffee Chair : Providing & placing of Coffee Chair overall size : 600L x 550D x 850H mm made up of seasoned and chemically treated Sisam solid wood with Melamine polish of approved shade. Front/Back legs of chair to measure 50x50 mm thick tapering down to 30x30 mm at the bottom. Horizontal frame of size 60x28mm connecting all legs. Chair backrest/Seat/Armrest to have 18mm thick ISI mark MR Plywood base upholstered using 32 density PU foam covered with good quality fabric @Rs.400 per mtr. cost in approved colour and texture to be used. Seat foam thickness 50mm, backrest foam thickness 50mm and armrest inner side foam thickness 25mm. Total sitting height from floor till seat to be 450mm. Plastic buffers to be provided under legs. The cost is inclusive of all labour and material etc. complete in all respect as per drawing and direction given by Engineer in charge. Please refer drawings for more details.

Executive Revolving Chair High Back : Providing and placing Executive Revolving Chair High Back of size 763Lx763Dx970H to 1090 H mm. The seating height of the chair ranges from 425mm to 545mm from floor. Seat / Back assembly : The seat & back are made up of 12mm thick hot pressed plywood and upholstered with fabric upholstery covers and moulded polyurethane foam of density 40 kg/m3. The back foam of density 40 kg/m3 is designed with contoured lumber support for extra comfort. Armrest : The one piece armrests are injection moulded from black Polypropylene. Centre Tilt Mechanism : The mechanism is designed with features such as 360 degree revolving type, upright position locking back, seat / back tilt adjustment. The chair shall have Pneumatic Height adjustment of 100mm. The bellow is 3 piece telescopic type and injection moulded in black polypropylene. The pedestal assembly is injection moulded in black glass filled nylon and fitted with 05 nos. of twin wheel castors which are injection moulded in black nylon. The cost is inclusive of all labour and material etc. complete in all respect as per drawing and direction given by Engineer in charge. Please refer drawings for more details.

Single Bed With Storage : Providing and placing Single Bed With Storage of size 915 x2057x1050mm made up of seasoned and chemically treated Sheesham solid wood with melamine polish of approved shade. The bed shall have one front pull-out drawer of size 795mmx900mmx280mm (WxDxH) on wheels for storage. Bed Headboard size 915Wx1050H mm shall have 02 legs of size 60mmx38mmx1032mm, top frame of size 915x38x18mm, horizontal/vertical frames one each of size 60x28mm, 110x28mm & 60x28mm. The headboard shall have 02 nos. of raised panel made out of 18mm thick solid sheesham wood and 01 no. 18mm thick ISI mark MR Plywood panel size 795x327x18mm. Bed side panels 02 nos. of size 1981x340x18mm in sheesham wood. Bed Footboard size 915Wx448H mm shall have 02 legs size 60x38x430mm, top frame of size 915x38x18mm & horizontal frame of size 100x38mm. Front pull-out storage drawer shall have 01 no. of 795x280x18mm wood panel in front, side/back panels in 18mm thick ISI mark MR Plywood with teak wood lipping & drawer base in 12mm ISI mark MR plywood. The bed shall have 12mm thick ISI mark MR Plywood top for mattress supported with 01 no. of wooden panel of size 879x80x28mm. Good quality wheels for drawer and bed clamps for bed assembly to be provided. The cost is inclusive of all labour and material etc. complete in all respect as per drawing and direction given by Engineer in charge. Please refer drawings for more details.

Bedside Cabinet : Providing and placing Bedside Cabinet of size 580 x400x500mm with 01 Drawer & open storage rack made up of seasoned and chemically treated Sheesham solid wood with melamine polish of approved shade. Sheesham Wood Top/Base/Side panels/Drawer front panel thickness 18mm, Legs 38x38mm, front/side/back horizontal frame of size 40mmx28mm, cabinet back panel in 9mm thick ISI Mark MR plywood. Drawer side/back panels made with 18mm thick MR plywood & base in 9mm thick MR plywood. Good quality 14” black telescopic channels & handles (130mm) in antique finsih to be provided. Clear Glass 8mm thick with edge polishing to be provided on the top. Plastic buffers to be provided under legs. The cost is inclusive of all labour and material etc. complete in all respect as per drawing and direction given by Engineer in charge. Please refer drawings for more details.

Study Table : Providing and placing Study Table of size 1180x600x750mm with 01 Drawer made up of seasoned and chemically treated Sheesham solid wood with melamine polish of approved shade. Sheesham Wood Top/Side/Back/Front /Drawer front panel thickness 18mm, Legs 50x50mm, Upper horizontal frame front/side/back of size 30mmx28mm, bottom leg support /foot rest size 40x28mm. Drawer front wood panel of size 560x80x18mm, drawer side/back panels made with 18mm thick ISI Mark MR plywood & base in 9mm thick MR plywood. Good quality 18” telescopic channels & handles (130mm) in antique finish to be provided. Clear Glass 8mm thick with edge polishing to be provided on the top. Plastic buffers to be provided under legs. The cost is inclusive of all labour and material etc. complete in all respect as per drawing and direction given by Engineer in charge. Please refer drawings for more details.

Chair : Providing & placing of Dining chair overall size : 450L x 480D x 950H mm made up of seasoned and chemically treated Sisam solid wood with Melamine polish of approved shade. Front legs of 55x55 mm thick tapered to 40x40 mm at the bottom. Back legs with appropriate tilt/bend cut as per design measuring size 45x35 mm at the seat level gradually tapering down to 45x25mm at top. Chair backrest with 7 nos. of vertical members of size 20x18mm fixed at equal gaps between the two back legs. Backrest horizontal curved frame total 2 nos. visible above seat are of size 55mmx18mm . Frames below seat of size 55mmx18mm total 4 nos. with adequate corner supports. Connecting frame as support between front and back legs will be of size 40mmx18mm to be fixed on sides only. Seat foam thickness to be 48mm made up of 32 density PU foam of approved brand. Total seat thickness will be 60 mm covered with good quality fabric @Rs.400 per mtr. cost in approved colour and texture. Chair seat to have a 12 mm MR Plywood base underneith the foam. Total sitting height from floor till seat to be 460mm and backrest above seat to measure 490mm in height. Plastic buffers to be provided under legs. The cost is inclusive of all labour and material etc. complete in all respect as per drawing and direction given by Engineer in charge.

Chair Upholstered : Providing & placing of Chair overall size : 680L x 750D x 800H mm made up of seasoned and chemically treated Sisam solid wood with Melamine polish of approved shade. Chair front legs 50x38 mm thick tapered to 50x30 mm at the bottom, back legs 50x28mm thick tapered to 30x28mm at the bottom, front/side/back wood frames under seat 40x28mm and armrest 50x38mm in wood. Chair seat shall have additional wood frame made out of 65x28mm wood with 03 nos. of S- Springs running across front to back and 04 nos. of elastic bands (niwar) running across the length. The back shall have internal wood framing made from 18mm thick wood and elastic bands (niwar) running across the length and height of the back. The back shall have 01 no. 40x28mm wood frame visible at the back. The seat shall have 120mm thick 32 density PU foam and the back rest shall have 75mm thick 32 density PU foam covered with good quality fabric @Rs.400 per mtr. cost in approved colour and texture to be used. Plastic buffers to be provided under legs. The cost is inclusive of all labour and material etc. complete in all respect as per drawing and direction given by Engineer in charge. Please refer drawings for more details.

Coffee Table : Providing and placing Coffee Table of size 580mmx580mmx500mm made up of seasoned and chemically treated Sheesham solid wood with melamine polish of approved shade. Sheesham Wood Top thickness 28mm, Legs 50x28mm thick at top and tapered to 35x28mm at the bottom. Plastic buffers to be provided under legs. The cost is inclusive of all labour and material etc. complete in all respect as per drawing and direction given by Engineer in charge. Please refer drawings for more details.

Luggage Rack/Fridge Cabinet : Providing and placing Luggage Rack/Fridge Cabinet of size 1200 x600x750mm having 02 Drawers & 01 fridge compartment with shutter made up of seasoned and chemically treated Sheesham solid wood with melamine polish of approved shade. Sheesham Wood Base/Side panels/Removable Shelf/Drawer front panel thickness 18mm, shutter frame size 50x28mm and vertical battens 18x18mm, Legs 50x50mm, front/side/back horizontal frames of size 40mmx28mm, cabinet back panel in 9mm thick ISI mark MR plywood. Drawer side/back panels made with 18mm thick MR plywood & base in 9mm thick MR plywood. To provide 01 nos removable shelf 18mm inside shutter compartment. Granite 18mm thick with edge polishing to be pasted on 12mm MR plywood top. Good quality 18” telescopic channels & handles (130mm) in antique finish to be provided. Plastic buffers to be provided under legs. The cost is inclusive of all labour and material etc. complete in all respect as per drawing and direction given by Engineer in charge. Please refer drawings for more details.

Wardrobe : Providing and placing Wardrobe of size 750 x600x2100mm with 02 Doors & 01 shoe-rack drawer at the bottom finished with melamine polish of approved shade. Legs 40x38mm and front/side/back horizontal frames 40x28mm made up of seasoned and chemically treated Sheesham solid wood. Top/Base/Drawer Side & Back Panels/Shelves made up of 18mm thick MR plywood with both side okoume veneer face. Wardrobe Door /Drawer front panel thickness 18mm and wardrobe side panel thickness 12mm made up of one side sheesham veneered plywood (outer side) and okoume veneer face on the inner side. Wardrobe Back/Drawer base made up of 9mm thick okoume veneer face plywood. Good quality 18” telescopic channels, handles (165mm) in antique finish, S.S. hinges (75mm), lock, S.S. hanger rod, rod brackets, tower bolt (150mm) and other necessary hardware to be provided of approved brand. Plastic buffers to be provided under legs. The cost is inclusive of all labour and material etc. complete in all respect as per drawing and direction given by Engineer in charge. Please refer drawings for more details.

Mirror With Wooden Frame : Providing and Placing Mirror With Wooden Frame of size 550mmx1780mm (WxH) made up of seasoned and chemically treated Sheesham solid wood with melamine polish of approved shade. The frame shall be made up of 02 nos. 28mm thick vertical wood panels of size 1780x65x28mm & 02 nos. 28mm thick horizontal wood panels of size 420x65x28mm. The wood frames shall have 8mm thick rebate at back to accommodate 4mm thick Mirror + 4mm thick MR plywood. Good quality 4mm thick mirror with 4mm thick MR plywood backing to be provided. Fixing on wall with necessary hardware to be done at site. The cost is inclusive of all labour and material etc. complete in all respect as per drawing and direction given by Engineer in charge. Please refer drawings for more details.

Bed Double With Storage : Providing and placing Bed With Storage of size 1885x2057x1050mm made up of seasoned and chemically treated Sheesham solid wood with melamine polish of approved shade. The bed shall have 01 no. side pull-out drawer on each side (total 02 nos.) on wheels for storage of size 1180mmx850mmx220mm (WxDxH). Bed Headboard size 1885Wx1050H mm shall have 02 legs of size 60mmx38mmx1032mm, top frame of size 1885x38x18mm, horizontal/vertical frames one each of size 60x28mm, 110x28mm & 60x28mm. The headboard shall have 02 nos. of raised panel made out of 18mm thick solid sheesham wood and 01 no. 18mm thick ISI mark MR Plywood panel size 1765x327 at the bottom. Bed side panels 02 nos. of size 1981x340x28mm in sheesham wood. Bed Footboard size 1885Wx448H mm shall have 02 legs size 60x38x430mm, top frame of size 1885x38x18mm & horizontal/vertical frames of size 60x28mm. The footboard shall have 02 nos. of raised panel made out of 18mm thick solid sheesham wood. Side pull-out storage drawers shall have 01 no. of wood pnale of size 1180x220x28mm in front, side/back panels in 18mm thick ISI mark MR Plywood with teak wood lipping & drawer base in 12mm MR plywood. The bed shall have 12mm thick ISI mark MR Plywood top for mattress supported with 01 no. of wooden frame of size 1981x80x28mm & 04 nos. wooden frame of size 900x80x28mm. Good quality wheels for drawer and bed clamps for bed assembly to be provided. The cost is inclusive of all labour and material etc. complete in all respect as per drawing and direction given by Engineer in charge. Please refer drawings for more details.

Wall Corner Rack : Providing and Placing Wall Corner Rack of size 250mmx250mmx1300mm (LxWxH) made up of seasoned and chemically treated Sheesham solid wood with melamine polish of approved shade. The rack shall be made up of 05 nos. 18mm thick vertical wood panels of size 250x245mm & 04 nos. horizontal wood panels of size 250x250mm. Fixing on wall with necessary hardware. The cost is inclusive of all labour and material etc. complete in all respect as per drawing and direction given by Engineer in charge. Please refer drawings for more details.

Sofa 03 Seater : Providing and placing 3 seater sofa of size 2100 mmx750 mm x880 mm (LxDxH). Seating Height from Ground– 450mm. The sofa shall have both side armrest. Seating Area Length– 1800mm & Depth-600mm. Armrest height 630mm & Backrest height 880mm from floor. Inner frame work material shall be 18mm thick hardwood. Thickness of Plywood used shall be 12mm ISI mark MR plywood. Seat foam thickness shall be 125mm which is a combination of 25mm thick 32 density super-soft foam + 100mm thick 32 Density Foam to be pasted on internal frame made out of 65x28mm hardwood. Armrest shall have 50mm thick 32 density foam on the inner sides. The sofa backrest shall have 75mm thick foam which is a combination of 25mm 32 Density Super-soft + 50mm 32 Density foam. Exposed wooden base/legs of sofa shall be made of seasoned and chemically treated Sheesham solid wood with melamine polish of approved shade. The sofa base shall have 4 legs of 50x50x152mm tapered to 30x30mm at the botom and 4 wooden frames 65x18mm connecting all 4 legs. Fixing of polished baseframe with legs shall be done by self tapping screws. The sofa seat shall have 09 nos. of S- Springs running across front to back and 04 nos. of elastic band (niwar) running across the length. Sofa to be covered with good quality fabric (of approx. Rs 400 per mtr) of approved colour and texture. Plastic buffers to be provided under legs. The cost is inclusive of all labour and material etc. complete in all respect as per drawing and direction given by Engineer in charge. Please refer drawings for more details.

Sofa 02 Seater : Providing and placing 2 seater sofa of size 1500 mmx750 mm x880 mm (LxDxH). Seating Height from Ground– 450mm. The sofa shall have both side armrest. Seating Area Length– 1200mm & Depth-600mm. Armrest height 630mm & Backrest height 880mm from floor. Inner frame work material shall be 18mm thick hardwood. Thickness of Plywood used shall be 12mm ISI mark MR plywood. Seat foam thickness shall be 125mm which is a combination of 25mm thick 32 density super-soft foam + 100mm thick 32 Density Foam to be pasted on internal frame made out of 65x28mm hardwood. Armrest shall have 50mm thick 32 density foam on the inner sides. The sofa backrest shall have 75mm thick foam which is a combination of 25mm 32 Density Super-soft + 50mm 32 Density foam. Exposed wooden base/legs of sofa shall be made of seasoned and chemically treated Sheesham solid wood with melamine polish of approved shade. The sofa base shall have 4 legs of 50x50x152mm tapered to 30x30mm at the botom and 4 wooden frames 65x18mm connecting all 4 legs. Fixing of polished base frame with legs shall be done by self tapping screws. The sofa seat shall have 06 nos. of S- Springs running across front to back and 04 nos. of elastic band (niwar) running across the length. Sofa to be covered with good quality fabric (of approx. Rs 400 per mtr) of approved colour and texture. Plastic buffers to be provided under legs. The cost is inclusive of all labour and material etc. complete in all respect as per drawing and direction given by Engineer in charge. Please refer drawings for more details.

Centre Table : Providing and placing Centre Table of size 800 mm x 800 mm x 450 mm (LxDxH) made up of seasoned and chemically treated Sheesham solid wood with melamine polish of approved shade. The table be shall have 08 mm thick clear glass placed on top with edge polishing . Top made out of 18mm Thick sheesham veneered plywood with 50x18mm wood framing on all four sides. Legs 04 nos. size 50mm x50mmx400mm connected with 40x28mm wood framing. Lower Rack made from 18mm thick sheesham veneered plywood connected to legs with 30mmx28mm sheesham wood battens connected diagonally to table legs. Plastic buffers to be provided under legs. The cost is inclusive of all labour and material etc. complete in all respect as per drawing and direction given by Engineer in charge. Please refer drawings for more details.

Centre Table : Providing and placing Centre Table of size 600 mm x 600 mm x 450 mm (LxDxH) made up of seasoned and chemically treated Sheesham solid wood with melamine polish of approved shade. The table be shall have 08 mm thick clear glass placed on top with edge polishing . Top made out of 18mm Thick sheesham veneered plywood with 50x18mm wood framing on all four sides. Legs 04 nos. size 50mm x50mmx400mm connected with 40x28mm wood framing. Lower Rack made from 18mm thick sheesham veneered plywood connected to legs with 30mmx28mm sheesham wood battens connected diagonally to table legs. Plastic buffers to be provided under legs. The cost is inclusive of all labour and material etc. complete in all respect as per drawing and direction given by Engineer in charge. Please refer drawings for more details.

Centre Table : Providing and placing Centre Table of size 1200 mm x 600 mm x 450 mm (LxDxH) made up of seasoned and chemically treated Sheesham solid wood with melamine polish of approved shade. The table be shall have 08 mm thick clear glass placed on top with edge polishing . Top made out of 18mm Thick sheesham veneered plywood with 50x18mm wood framing on all four sides. Legs 04 nos. size 50mm x50mmx400mm connected with 40x28mm wood framing. Lower Rack made from 18mm thick sheesham veneered plywood connected to legs with 30mmx28mm sheesham wood battens connected diagonally to table legs. Plastic buffers to be provided under legs. The cost is inclusive of all labour and material etc. complete in all respect as per drawing and direction given by Engineer in charge. Please refer drawings for more details.

Couch : Providing and placing Couch of size 1650 mmX600 mm X640 mm (LxDxH) made up of seasoned and chemically treated Sheesham solid wood with melamine polish of approved shade. Seating Height from Ground– 450mm. The couch shall have legs 04 nos. of size 290x60x60mm tapered to 40x40mm at the bottom, wood frames of size 70x28mm connectiing all legs, 02 nos. wooden arms of size 600x40x350mm, wooden frames 02 nos. below the seat of size 40x28mm. Seat foam thickness 100mm 32 Density shall be pasted on a separate hardwood framing made from 65mmx28mm frames and having 01 nos. wooden supports of size 65mmx28mm with 06 nos. of S- Springs running across front to back and 04 nos. of elastic bands (niwar) running across the length. The couch shall have 02 nos. bolsters of size 550x170mm made out of 32 Density foam. Seat and bolsters to be covered with good quality fabric (of approx. Rs 400 per mtr) of approved colour and texture. Plastic buffers to be provided under legs. The cost is inclusive of all labour and material etc. complete in all respect as per drawing and direction given by Engineer in charge. Please refer drawings for more details.

Showcase Unit / TV Unit : Providing and placing Showcase Unit / TV Unit of size of size 2100x450x750 with 02nos. double doors made up of seasoned and chemically treated Sheesham solid wood with melamine polish of approved shade. Sheesham Wood Top/Shelf/Base/Side panels/Vertical Partitions thickness 18mm, front vertical frame size 50mmx28mm & horizontal frames of 30x28mm, skirting of size 70x18 on front and sides of the cabinet. Moulding 52mm running under the top on three sides. 01 no. 18mm thick wooden shelf in each compartment (total 02 nos.). Cabinet back panel in 9mm thick MR plywood. Shutter made out of 60mmx28mm wood frame with 25x14mm wood battens having clear glass 5mm thick installed from the back. Clear Glass 8mm thick with edge polishing to be provided on the top. Good quality handles (130mm) in antique finish and S.S. Hinges (65mm) to be provided. The cost is inclusive of all labour and material etc. complete in all respect as per drawing and direction given by Engineer in charge.

Outdoor Table : Providing and placing Outdoor Table made primarily out of 18mm dia MS pipe and plastic wicker material of approved shade. Table of size 600mm Dia X600mm Height with 400mm dia x 10mm thick glass. The cost is inclusive of all labour and material etc. complete in all respect as per drawing and direction given by Engineer in charge.

Outdoor Chair : Providing and placing Outdoor Chair made primarily out of 18mm dia MS pipe and plastic wicker material of approved shade. Chair of size 600x530x750mm having sitting height from floor 430mm. The cost is inclusive of all labour and material etc. complete in all respect as per drawing and direction given by Engineer in charge.

Outdoor Sofa 02 Seater : Providing and placing of Outdoor Sofa 2 Seater of size 1500mmx700mmx700mm(LxDXH) made primarily out of 18mm dia MS pipe and covered all over with plastic wicker material of approved shade. Seating Area Length-1200mmxDepth-650mm. Sitting height from ground - 400 mm. Sofa to have 01 nos. loose seat size: 1200mmx650mm (LxD) made out of 150mm -32 density PU foam and 02 nos. loose back cushions size : 580mmx400 mm (LxH) made out of 100 mm - 32 density PU Foam with fibre fill. Armrest above seat is 180mm and backrest above seat is 300 mm. Both armrest to be 150mm wide and Frame below loose seat to be 180mm wide. Sofa to have wooden legs at base of size 150mmx70mm fixed on all four sides finished with melamine polish. Sofa to be covered with good quality fabric (of approx. 400 per metre) of approved color and texture. Plastic buffers to be provided under legs. The cost is inclusive of all labour and material etc. complete in all respect as per drawing and direction given by Engineer in charge.

Locker Cabinet : Providing and placing of Locker Cabinet of size 1300mm x 400mm x 1700mm with melamine polish of approved shade. The cabinet shall have 9 lockable compartments. Legs 40x38mm and front/side/back horizontal frames 40x28mm made up of seasoned and chemically treated Sheesham solid wood. Top/Base/Shelves /Vertical Partitions made up of 18mm thick MR plywood with both side okoume veneer face. Cabinet Shutter thickness 18mm and cabinet side panel thickness 12mm made up of one side sheesham veneered plywood (outer side) and okoume veneer face on the inner side. Cabinet Back made up of 9mm thick okoume veneer face plywood. Good quality handles (100mm) in antique finish, S.S. hinges (75mm), lock and other necessary hardware to be provided of approved brand. Plastic buffers to be provided under legs. The cost is inclusive of all labour and material etc. complete in all respect as per drawing and direction given by Engineer in charge. Please refer drawings for more details.

Games Table : Providing and placing Games Table size 1000mm x 1000mm x 750mm made up of seasoned and chemically treated Sheesham solid wood with melamine polish of approved shade. Table Top made up of 18mm thick sheesham wood, Frame 04 nos. size 800mmx 85mmx28mm, Legs 04 nos. size 732mm x 80mm x 80mm . The table shall have 10 mm thick clear glass with edge polishing placed on the top. Heavy duty plastic buffers to be provided. The table legs shall be fixed to the frame with M.S. angle brackets (dub sets) with double bolt. The cost is inclusive of all labour and material etc. complete in all respect as per drawing and direction given by Engineer in charge. Please refer drawings for more details.

SRK Modular Furniture Co.

Daniel Furnitures P Limited