REPAIRS TO COMPOUND WALL, FENCING AND GATE UNDER AGE B/R AT GE(U) E/M MEERUT CANTT

Amount

Demolition Brickwork or stone boulder masonry/PCC block masonry , built in cement mortar or cement lime mortar including all quoins,arches, pillars,etc. but excluding ashlar facings, dressed stonework and precast concrete articles complete all as specified.

Dismantling posts or struts ( wood , steel or R.C.C.) any section embedded in Concrete, brick work,masonry, etc., including taking out embedded portion and making good disturbed ground complete all as specified.

Excavating in post holes in ordinary soil ( or similar holes) each n exc 0.5 cu.m. getting out, (except returning,filling in and ramming earth or broken rubble mixed with earth around , in layer not exceeding 25 cm, watering,) and removing surplus soil to a distance n.exc 50 M complete all as specified.

Surface dressing not exceeding 15cm deep in any type of soil including cutting vegetation or grass and uprooting tree upto 300mm girth shrubs, bushes and removing rubbish upto a distance of 500 metre outside the periphery of area all as specified and directed.

M&L Plain Cement concrete 1:4:8 type D2 using 40mm graded crushed stone aggregate in foundations, filling and mass concrete complete all as specified.

M&L Brick work with old size fly ash bricks., straight or curved on plan exc 6 m mean radius , built in, cement and sand mortar 1:6 complete all as specified.

M&L Brick work with old size fly ash bricks .(except bricks) , straight or curved on plan exc 6 m mean radius , built in, cement and sand mortar 1:6 complete all as specified.

M&L for greasing the steel rolling shutter including opening top cover, removing spring etc. and S&F new springs , greasing the anchoring rod, refixing top cover etc. making the rolling shutter functional area of rolloing shutter exceeding 4 sqm and not exceeding 7.5 sqm each complete all as specified .

M&L for greasing the steel rolling shutter including opening top cover, removing spring etc. and S&F new springs , greasing the anchoring rod, refixing top cover etc. making the rolling shutter functional area of rolloing shutter exceeding 8 sqm each complete all as specified .

M&L mild steel work as in hand rails, half round or other stock section or core for wooden hand rail straight portion , drilled and counter sunk for balusters running bars, for doors, balusters, nosing to steps including embedding in concrete and screwing etc. wind ties for roof including securing bolts; posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire , etc.; flat iron fillets ( for securing wire mesh etc. including all necessary drilling , bolting or rivetting , etc., and similar work conforming to Fe-290 Gde E-165 complete all as specified.

M&L mild steel round bars 10 mm dia and over , cut to length , bent to shape required, including cranking, binding with and including GI mild steel wire not less than 0.90 mm dia. or securing with clips quality conforming to grade Fe 290 ( Gde-E-165) for strengthening of chain link complete all as specified.

M&L Mild screw bolts ( Machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends , each screwed end to be fitted with washers and one hexagonal or square nut , exc 5 but n exc 10cm long and 5 to 10mm dia of shank complete all as specified.

Supplying only chain link fencing (weighing not exceeding 4 Kg/sqm) including line wires ( if specified of GI wire) , of specified mesh size and type and line wire to any type of standards , rails, straining bolts etc. including provision of binding wire complete all as specified.

Fixing only chain link fencing including line wires, any mesh size and type to any type of standards , rails, straining bolts etc. including provision of binding wire complete all as specified.

Taking down of old unserviceable barbed wire and M&L Mild steel Galvanised, 2 strand, steel barbed wire 2.24 mm dia barbed with 2 mm dia barbs at 75 mm spacings and straining and fixing to any type of standard rails straining bolts , including,securing or tying at crossings with and provision of galvanised mild steel wire , staples or steel pins etc. as directed ( each line wire to be measured) complete all as specified.

M&L rendering 15 mm thick on fair faces of brick work or concrete surfaces , in cement and sand mortar 1:6 , top surfaces finished even and smooth without using extra cement complete all as specified.

Taking down cement plaster on brick or stone walls , concrete block walls etc. including racking out joints, hacking for key, scrubbing down with water, any description etc. and removing of the rubbish complete all as specified .

M&L preparation of new plastered or unplastered surfaces of walls and applying two coats cement base paint , white or tinted on new surfaces of walls including washing floors, cleaning glass, joinery,electrical fittings, wiring etc. , of drops and splashes complete all as specified .

M&L for complete removal of existing treatment from the walls and applying Two coats of cement base paint , white or tinted on old surfaces of walls including washing floors, cleaning glass, joinery,electrical fittings, wiring etc. , of drops and splashes complete all as specified .

Material & Labour for applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces complete all as specified.

M&L for preparation of old decorated surfaces of walls by complete removal of existing treatment and sand papering surfaces to achieve smooth surfaces and Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives of required shade: New work (Two or more coats applied @ 1.43 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm) complete all as specified.

M&L preparation of new steel surfaces of any description not otherwise described over 10 cm width or girth and applying two coats of synthetic enamelled paint over one coat of red oxide Zinc chrome primer complete all as specified.

SA construction co.

M/S A B CONSTRUCTION

vibha associates