Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹21.1 LAccepted-AOC | L1 | Accepted-AOC Being L1 | |
| 2 | L2₹21.8 L+₹44,513 (2.09%)Rejected-Finance | L2 | Rejected-Finance BEING NOT L1 | |
| 3 | L3₹23.1 L+₹1.8 L (8.52%)Rejected-Finance | L3 | Rejected-Finance BEING NOT L1 |
Tender Value
₹22 L
EMD Value
₹44,000
Closing Date
10 Jul 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE AF OJHAR
GE AF OJHAR
REPAIR TO EXTERNAL PLASTER, FINS, KITCHEN PLATFROM ,CONNECTED ITEM, S/C IN DOMESTIC ,TECHNICAL AND RAKSHANAGAR AREA AT AF STN OJHAR
2023_MES_602351_1
8113/E8
Open Tender
Civil Works
Item Rate
335 days
OJHAR
Please refer Tender documents.
8 documents required · 8 mandatory
₹500
GE AF OJHAR
₹44,000
Yes
27 Jul 2023
9 Jun 2023
12 Jul 2023
10 Jun 2023
10 Jul 2023
22 Jun 2023
Amount
Taking down cement plaster on brick or stone wall any description including raking out joints, hacking for key, scrubbing down with water etc.compete all as specified as directed by Engineer -in -charge ,
M&L for 15mm thick rendering on brick/concrete surfaces on broken edges of chajjas, facia, slab, roof projectioon and any other brick/concrete surface in patch work in CM 1:4 and finishing fair and even without using extra cement with using 2% Integral water proofing compound by wt of cement (Note: Water proofing compound will be measured and paid separately under relevant item) Note: The rate quoted shall be deemed to include for work up to four storey building & height upto 15.00m including all safety measures, scaffoldings etc., required for carrying out the work and nothing extra on this account shall be admissible.
All as per item no 2 above but 20mm thick in two coats
M&L for rendering 10mm thick on fair faces on ceiling with cement mortar 1:3
Supply only Integral water proofing compound. (Make: Choksey/STP/Fosroc)
Cutting groove in cracked walls and filled with epoxy grout (Make : Fosroc/CHOKSEY/STP) with a pressure grout equipment to inject through the prefixed nozzles. Make : Fosroc & equivalent
Material and labour for new plastered surface applying two coat of exterior acrylic emulsion (Weather coat) over a coat of exterior acrylic primer of approved colour of ASIAN/Berger/CHOKSEY/STP of equivalent all as specified and as directed.Note: The rate quoted shall be deemed to include for work up to four storey building & height upto 15.00m including all safety measures, scaffoldings etc., required for carrying out the work and nothing extra on this account shall be admissible.
Complete Removal of existing treatment on old surfaces of wall/ ceiling and make the surface smooth by rubbing/filling the holes with cement based wall care putty and applying two coat of cement base paint white or tinted including cornices etc.complete all as specified and as directed by Engineer in charge. Note : Curing is essential before & after application of cement base paint. Contractor is make his proper arrangement of work scaretted in all the buildings.
Removal of trees of roots of any girth in during cutting of brick or concrete surface completely and making good with filling of cement concrete 1:2:4 type B0 including formwork etc and pouring acid ete for trees not to grow further all as specified and directed by Engineer in charge.
Demolition of RCC members like Roofs, floors (other than ground floors), beams, staircases, landing, chajjas and similar suspended work
M&L for RCC in B1, 1:2:4 (20mm graded stone aggregate) for Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like
Demolition of brickwork built in cement mortar including all quoins, arches, pillars, but excluding pre-cast concrete articles, Complete all as specified and directed by Engineer-in-charge.
M&L Brick work with subclass `B' bricks, straight or curved on plan exc 6m mean radius, built in CM 1 : 6 including pointing flush the external face of the brick work as the work proceeds all as specified and directed by Engr-in-Charge
M&L for 15 mm thick cement plaster in CM 1:4 on brick surface finished even and smooth without using extra cement Complete all as specified and directed by Engineer-in-charge.
M&L Machine cut cudappah stone slab 20-25mm thick over cement screed base, laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing, Rounding to edges of stone slabs one edge, such as in steps, cooking platform, and other similar situations complete all as specified.
Demolition of Stone slabs and tiles of any description or thickness in floors, aprons etc.
M&L for mirror polish Kota stone slab flooring 20-25mm thick over 15 mm cement screed base laid of cement mortar 1:6 and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and mirror polishing . Complete all as specified and as directed by Engineer-In-Charge.
M/L for mirror polished Kota stone slab 20-25mm thick in riser of steps, skirting, dado and pillar including 10 mm thick rendering of cement mortar 1:4 and jointed with ditto Complete all as specified and as directed by Engineer-In-Charge.
M&L for drilling holes for pipes etc in cadappa/granite including RCC slab n exc 25mm dia and nexc 100mm depth
Dismantling wrought iron or mild steel work of any description not otherwise provided for
S & F for mild steel works such as bands straps, support or stays for rain water, ventilating pipe, including bolts if required, hold fasts etc and similar small articles conforming to Fe 310-0 or Fe 410-0 compete all as specified as directed by Engineer -in -charge
S & F Rolled mild steel framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete
M & L two coats of synthetic enamel paint over one coat of red oxide on steel based surface exc. 10cm width or girth including preparation of new or previously untreated surfaces.compete all as specified as directed by Engineer -in -charge
S&F Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping)
M&L for cleaning and removing loose particles Chajjas and applying two coats of Damp proof course of approved make including plastering in CM 1:4 with proper chamfering of approved make (Make : Asian pains/ Choksey)
M/L for making duct for window AC in wall /window with outside MS grill of sq/round bar of 12 mm dia and inside sliding arrangement of acrylic sheet sliding type including demolition of brick work , plastering and making good the surfaces with cement plaster and plaster patta 50 mm wide all over opening to avoid rain water inside from external side and paint touchup including removal of debris up to 50 m
M&L for Washed stone grit plaster on exterior walls in two layers, under layer 12mm cement plaster 1:4 (1 cement: 4 coarse sand ) furrowing the under layer with scratching tool, applying cement slurry on the under layer @ 3 Kg of cement per square metre, top layer 15mm cement plaster 1:1/2:2 (1 cement: 1/2 coarse sand : 2 stone chipping 10mm nominal size) in panels with groove all around as per approved pattern including scrubbing and washing, the top layer with brushes and water to expose the stone chippings .complete all as specified (Payment for providing grooves shall be made separately). Note: The rate quoted shall be deemed to include for work up to four storey building & height upto 15.00m including all safety measures, scaffoldings etc., required for carrying out the work and nothing extra on this account shall be admissible.
M&L for Forming groove of uniform size 15mm wide and 15mm deep in the top layer of washed stone grit plaster as per approved pattern using wooden battens, nailed to the under layer including removal of wooden battens, repair to the edges of panels and finishing the groove complete as per specifications and direction of the Engineer-in-charge :
M&L for Repair to RCC structure using micro concrete all as per manufactureres instructions, as descripbed below and as specified and directed. (a) chipping off existing loose and damaged/craked concrete/plaster surfaces at location decided by engr-in-charge to depth n.exc 100mm using peneumatic tools or with light chiseling & wire brush, descale the exposed surfaces of reinforcement with wire brushes removing all loose rust scales from rebar blowing all loose dust with blower and washing concrete surfaces. A coat of alkali rust converting primer to be applied on the reinforcement bar surfaces. (b) Welding additional reinforcement bars where dia of existing bar is found reduced than specified limit as directed. Note : Reinforcement will be measured and paid separately. (c) Applying coat of anticorrosive protective coating on both old & new reinforcement bars surfaces as per manufactureres instructions (d) Applying a coat of epoxy resin concrete bonding agent to exposed concrete surfaces and rebars. (e) Providing polymer modified cement mortar in specified composition for making manufactureres instructions (Thickness varies from 25mm to 100mm) Note : - (i) The rate for necessaryscaffolding & formwork is included in the quoted rate. ii) The work will be carried out upto G+4 floors
S & F mild steel TMT Bars of 5mm dia and over upto and including 10mm in stirrups spacers and binding cut to length bent to shaps required,including cranking bending spirally for hooping for columns hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securibg with clips
S&F TMT Mild steel bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips
Supply and fix in repairs informatry refelective sign board with 2mm thick aluminium sheet of size not less than 0.60 sqm each enclosed by stainless steel frame of section not less than 40x 40 x1.6 mm thick, writing of letters on both side with size of letters not less than 10 cm in height and 2 cm in width and nos of letters exc 6 nos but not exc 25 nos each side with high intensity prismatic reflective tape, including 2 nos of stainless steel post in each board not less than 50 mm dia 1.6 mm thck duly polished for best shine fited round glove at height of 2.1 mm above ground level. each including 6 mm thick stainless steel plate of length exc. 22.5 cm and not exc. 30 cm long and dia of neck 11 to 15 mm for fixing each stainless steel plate, board shall be embedded in PCC 1:2:4 type B1 (20mm graded aggregate) of size in post holes 30x30x45cm including all excavations and removing the excavated material upto 50 mtr distance. (Each frame and vertical post shall be aprovided with 8 Nos of (4 Nos with vertical post ) Stainless steel plate of sixe 100 mm x 100 mm x2 mm including nut and bolt complete all as specified and directed. Note : (i) Grade of stainless steel shall be of 304. (ii) Area as covered by outer edges of stainless steel frame of size 40x40x1.6 mm including aluminimum sheet only shall be measured for payment) Make : SUNEYEZ or equivalent as approved.
S & F in repair cat eye reflector polycarbonate body of both side reflections, size not less than 100 x90 mm thickness as per manufacturer, heavy duty with both side high grade red colour/yellow reflector, fixed with epoxy/fasterners etc as per manufacturers instruction on road surface.complete all as specified by Engineer-in-charge.(Make- 3M/Apcolite/Darkeye or Equivalent)
S&F in repair mild steel work in tubular post as in delenator of 50mm internal bore, medium grade thickness not less than 3mm and minimum of length 1 mtr (0.70mtr above GL and 0.30 mtr below GL) embedded in PCC 1:2:4 type B1 (20mm graded aggregate) of size in post holes 20x20x40cm including all excavations and removing the excavated material upto 50 mtr distance. etc and similar work confirming to Fe 290 grade E 165 complete all as specified and as directed.
S&F of reflective /Prismatic tape (yellow/Red/White/green) width of reflective tape not exc 50mm each of engineering grade over MS pipe of any dia as delinator complete all as directed and specified, Make : 3M/Avery or equvilant as approved.
S&F in repair of 600mm dia Convex mirrors faces manufactured from shatterproof acrylic and including with heavy duty fitting. The convex mirror, fish eye mirror in which the reflective surface bulges towards the light source and its reflecting light towards. Product code : AL 702, Polycarbonate body materials, wt not less than 2600Gms, complete fixing with clamps and post of any colour and embedded in PCC 1:2:4 type B1 (20mm graded aggregate) of size in post holes 20x20x40cm including all excavations and removing the excavated material upto 50 mtr distance. etc
Dismantling water tanks of exc250 ltr but n exc 500 ltr. of any description from roof slab of building up to four storey and removing to store.complete all as specified and as directed by Engineer-In-Charge
Dismantling water tanks of exc 500 ltr but n exc 1000 ltr. of any description from roof slab of building up to four story and removing to store. complete all as specified and as directed by Engineer-In-Charge
Supply and fixing 500 Litre capacity Rotational moulded polyethylene water storage tank (cylindrical vertical with closed top) three layers hoisted and fixed in position complete and all as specified and as directed by Engineer-in-Charge
Supply and fixing 1000 Litre capacity Rotational moulded polyethylene water storage tank (cylindrical vertical with closed top) three layers hoisted and fixed in position complete and all as specified and as directed by Engineer-in-Charge.
S&F in Repair Stainless Steel Plate Rack of size 31'' x 30'' x 10'' with using stainless steel sheet of 0.63mm thickness Fixed with Rawl plug and screw. complete all as specified and as directed by Engineer-In-Charge.
S&F in Repair Stainless Steel Plate Rack of size 24'' x 24'' x 10'' with using stainless steel sheet of 0.63mm thickness Fixed with Rawl plug and screw. complete all as specified and as directed by Engineer-In-Charge.
S&F in Repair stainless steel sinks with drainage board made of 1mm thick stainless steel sheet for kitchen or laboratory with plugs washers and waste pipe including fixing cantilever brackets and connecting union to pipe overall size not less than 915mm x 460mm and bowl size 410mm x 330mm x160mm.complete all as specified and as directed by Engineer-In-Charge.
S&F in repair Stainless steel sink, 1.00mm thick for kitchen or laboratory, with plug, waste pipe, washers, including cantilever cast iron brackets, connecting union etc., overall size 495mm x 420mm with bowl size 410mm x 330mm x 160mm complete.
Supply and fixing in repairs GI wire cloth power woven 0.56 mm nominal dia of wire and average width of aperture 1.18 mm and fixed with tinned tacks or galvanized wire staples for steel window and ventilator including providing MS beads and SS screws . Complete all as specified and directed by Engineer-in-charge.
S & F in repairs GI wire cloth 0.56 mm nominal dia of wire and average width of aperture 1.18 mm and fixed with tinned tracks or wooden beeding patti.to gauge door shutters and wooden windows compete all as specified as directed by Engineer -in -charge
Supply and fixing in repairs Aluminium wire cloth power woven 0.45 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with tinned tacks or galvanized wire staples for Aluminium window and ventilator . Complete all as specified and directed by Engineer-in-charge.
M&L for welding in repairs exc. 2.5cm but n exc. 5cm in length, thickness of metal to welded exc 6mm but n exc 9mm for steel windows , ventilators door frames , door hinges , door springs etc compete all as specified as directed by Engineer -in -charge
S & F in repairs curtain rod of CP MS 25 mm dia not less than 1.6mm thickness with chromium plated projected bracket both side as per sample fixed in position by drilling holes in walls and fixed the brackers with rawl plug and steel screw compete all as specified as directed by Engineer -in -charge
S/F in repair SS 25 mm dia bore fancy type drapery rod /curtain rod fancy type brackets cut to length as required in sigle or doble layer of approved colour complete all as directed by Engr in charge
M/L for filling floor /glazed tile joint with white cement tile grout with pigments matching with tiles including cleaning the tile surface properly
M&L for removing the loosen grill/ baluster/ railing and refxng the same with grouting to wall/ floor/ roof with PCC 1:2:4 (12.5mm greaged aggregate) and making good with finishes complete all as directed.
Dismantling wall/ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/blankets, any thickness, including cover fillets
S&F Horizontal level suspended ceiling comprising of Armstrong or equivalant GI Clip-in Micro perforated 600x600mm (nominal size) tiles of 12mm thick galvanised steel as per IS 277 (2003) suitable for architectural finishes in 0.5mm thickness as per in IS:513 (1994) in Global white colour with concealed suspension system having a bevelled edge of 3x3mm and height of 33mm on one side and 18mm on other side. Tile shall have perforated of hole diameter 2.5mm and open area 16% with linear and diagonal pitch of 5.5mm and 7.7mm respectively along with a border of 10mm. The tile shall be electrostaticalkly polyster powder coated using RoHS compliant powder having coating thickness ranging from 60-80microns. Back side of the tile shall have Soundtex fleece hot pressed mechanically for uniform bonding to achieve NRC up to 0.7 all as per manufactures instructions , complete all as specified and as directed by Engineer-In-Charge.
Removing of building materials & debries of any type the rate included i.e loading ,unloading and stacking/spreading etc outside of MD land with own arrangement by Contractor.
S&F in repairs 10 litres capacity PVC Valveless syphonic action type flushing cistern high / low level white complete with inlet , ball valve float and handle including brackets and telescopic down pipes and jointing with WC complete complete all as specified and as directed by Engineer-In-Charge
Servicing of Flushing system 10 litres capacity PVC Valveless symphonic action type flushing cistern low level . Taking down the all materials from existing cistern, Cleaned all dirt and refixing the same with making good and leakage free condition for 1 year, including repalcement of folat valve, Syphone, flush washer and flush handle with all fixing arrengments complete all as direceted.
Taking down shutters of any description exc 1 sq. m and n exc 2 sq. m each
M/L for powder coated Aluminium louvers with aluminium frame of 40mm x 75 mm x1.6 mm thick with other acceceries as per standard sections necessary clips , frosted glass , handels for up and down of size n exc 1.0 sqm each suitable fo wc and bath ventilation etc completed and as directed by Engr in charge
M & L for anodized aluminium sliding window with anodized aluminium frame of size 92 mm x 32 mm x1.60 mm thick) of 3 Track with 1.6mm thick, with sliding shutters with necessary channels (top rail, bottom rail and style of size 40mmx 18mm x1.6 mm thick) including glazing with tinted sheet glass panel 4.00mm thick, fitted with necessary jointing cleats, glazing clips,locking device one for each shutter , rubber packing, aluminium beading, screws etc, complete.compete all as specified as directed by Engineer -in -charge
M & L for anodized aluminium openable window with anodized aluminium frame of size 92 mm x 32 mm with 1.6mm thick,openable shutters with necessary channels (top rail, bottom rail and style of size 40mmx 18mm x1.6 mm thick) including glazing with tinted sheet glass panel 4.00mm thick, fitted with necessary jointing cleats, glazing clips,locking device one for each shutter , rubber packing, aluminium beading, screws etc, complete.compete all as specified as directed by Engineer -in -charge
M&L for 20mm thick Granite (of any type) tiles machine cut, in skirting/ dado including 10 mm thick rendering of CM 1:4 and jointed with grey cement slurry, and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing complete. Complete all as specified and as directed by Engineer-In-Charge
M&L to prevent leakage/seepage from roof shall be cleaned by removing dirt dust etc, all cracks to be treated with suitable crack filling compound and applying two coats of flexiable acrylic modified cementitious water proofing system @ 2kg/Sqm at 1mm thickness Make : Tech force 2K strong of M/s Choksey or URP admixed with cement in 1:1 propotion without waterin 1 coats of make Dr Fixit or equivelant. The Shall be tested with ponding test by Engr-in-Charge. If any failure occoured that shall be redone without any extra cost with in 24 Hrs.
S&F in repairs 12mm Perforated particle board/ tiles for insulation and accoustic purposes in ceiling, 60x60 cm in size, fixed with nails to timber frame work or with staples on snap grid
S&F in repair brass spindle for CP Bib Cock/ Piller cock/ Angle cock/Concealed stop cock of various make 15mm dia.
Supply only CP Head for CP Bib Cock/ Piller cock/ Angle cock/Concealed stop cock of various make under 15mm dia.
S&F in repair Bib tap PVC any colour/high pressure, screwed down high pressure as specified for 15mm bore .Complete all as specified and directed by Engineer-in-charge.
S&F in repair Pillar tap PVC any colour/high pressure, screwed down high pressure as specified for 15mm bore.Complete all as specified and directed by Engineer-in-charge.
S&F in repairs wash basin mixer cast copper alloy, chromium plated central hole without popup waste system with 450mm long copper pipe and brass nut including hot & cold water system complete all as directed (Make : Jaquar /Prayag/Plumber or equivalent
Fixing in repair wash basin mixer/ Wall mixer cast copper alloy, chromium plated central hole without popup waste system with 450mm long copper pipe and brass nut complete all as direceted.
S&F in repairs wall mixer cast copper alloy, chromium plated 3 in 1 system with provision for both over head shower chromium plated, with wall flange, screwed down, for iron pipe or for brass ferrule including dismantling of 3 No.concealled stop cock & 2 No. bib cock for each mixer (Make : (Make : Jaquar /Prayag/Plumber or equivalent complete all as specified and as directed by Engineer-In-Charge
S & F in Repair Pillar taps , cast copper alloy , with capstan heads, chromium plated, screwed down high pressure fancy type of 15 mm bore size with or without lettered Hot or Cold with long screwed shanks and flynuts , screwed for iron pipe and fixed Complete all as specified and as directed by Engineer-In-Charge.
S&F in repairs vitreous china squatting pan Orissa pattern size 580x440mm white with P or S trap front or back inlet and integral foot rests including connection to trap to flush pipe etc complete including for making good to floor etc Complete all as specified and as directed by Engineer-In-Charge.
S&F in repairs Plastic seat cover white closed pattern with flat bottom and cover with CP hinges for EWC.
S&F in Repair CP waste coupling 32 mm dia for wash basin
All as per item No 76 above but 40 mm dia for Sink for ISI Marked
S & F in Repair 32 mm PVC flexible pipe for waste outlet with threaded socket at one end.complete all as specified and as directed by Engineer-In-Charge
S & F in Repairs 40 mm PVC flexible pipe for waste outlet with threaded socket at one end.complete all as specified and as directed by Engineer-In-Charge
S & F in repairs CP health faucet special (1.5 mtr tube) with hook for EWC complete all as specified and directed by Engineer in charge
S&F in Repair bib taps of bore size 15mm, cast copper alloy, , chromium plated, fancy type, with crutch or butter fly handle screwed down , screwed for iron pipe or for brass ferrule Including dismanteling and making good the tiles if requiredComplete all as specified and as directed by Engineer-In-Charge.
Cleaning of old PVC water tank of capacity exc.250 & n. exc. 500 lit. removing all scale and dirt using detergent powder and bleaching powder etc from tanks and from mouth of pipe etc, and hoisting if required and reconnecting to the pipe and writing of cleaning date on tank with paint after removing the old cleaning date complete all as specified & as directed by Engineer in charge.
Cleaning of old PVC water tank of capacity exc.500 & n. exc. 1000 lit. removing all scale and dirt using detergent powder and bleaching powder etc from tanks and from mouth of pipe etc, and hoisting if required and reconnecting to the pipe and writing of cleaning date on tank with paint after removing the old cleaning date complete all as specified & as directed by Engineer in charge. For Item No 163,164 Note : Tank after cleaning shall be shown to the user and got signed by the user and put up to Engr-in-Charge weekly for verification. Any damage to ball cock, float valve, checknuts and any leakage/ any interruption in water supply occured due to negligence of Contractor the same shall be rectified by the Contractor and nothing shall be paid extra on this account.
Note: 1.The contractor shall deploy skilled tradesman i.e. 01x carpenter, 01 Mason, 01 Plumber with his helper and required T&P , complaints slips will be issued daily in the morning from AGE B/R office and the same shall be collected by the contractor/supervisor and resubmitted at evening within completion of alloted job duly signed by user . The complaint book shall be made by the Contractor as sample given by Deptt. No extra shall be paid on this account & rates are deemed to be included. 2.In case of failure in attending the complaints within 48 hrs the contractor shall be subjected to double recovery on rates quoted by the contractor inc connecting item. 3. Due to comprehensive maintenance work, the work shall be executed in various bldgs of Domestice area in small patch work/Small number complaints upto completion of Contract. This is applied to all items mentioned above. No extra shall be paid on this account & rates are deemed to be included . 4. Skilled worker is to be deployed for specialised work such as RCC repair
M/S PRAMOD SURESHCHANDRA AHER
Apachi Systems
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .