SITC of Fire Detection and alarm system

SITC of Microprocessor based Intelligent, addressable fire alarm control panel ( VDS / UL / FM / ULC approved ) fully networkable having requisite numbers of loop with 20% spare capacity with each loop capable of taking requisite number of devices as per latest IS/NBC, 1/4 VGA display character alpha-numeric liquid crystal display.The panel shall be soft addressable type.The panel shall be able to give pin point location of all fire/ fault conditions. Further, the panel must be able to automatically switch off respective control switches when ever any alarm is triggered.The Panel should be able to store sufficient numbers of log events in its Memory as per recommended standards. IS / NBC. Shiuld have the provision for incorporating with BMS.

The panel shall have in built rectifier, provision for external & internal printer ( if required ), Loop cards (no field loop card is allowed), L C D unit to indicate Fire/Fault Signal with address and analog output, complete in all respects, in built Surge protection facility, integral SMF lead acid batteries with sealed cells of 24 V capable of running for 24 hours normal working and then be capable of operating the system for 30 minutes during Emargency condition, with integral battery charger complete as required.

The FACP shall be capable of being networked (future expansion) with other similar FACP located at different part of the premises through single RS 485 bus.The FACP shall have provision for interfacing with the public address system and BMS( RS 485 ). The panel should have modbus output & ready to communicate with remote computer. The system must be preloaded with licenced software.

4 Loop (Make - Siemens / Cerberus Pro)

Supply & Installation of display board ( VDS / UL / FM / ULC approved ) in place of defective display board in the existing Fire Control & Alarm Panel or as per sample installed at existing FDA panel as per direction of EIC.

Display board 4 loop Fire Control & Alarm Panel. (Make: Siemens)

Display board 2 loop Fire Control & Alarm Panel. (Make: Siemens)

Display board 4 loop Fire Control & Alarm Panel. (Make - Esser / Honeywell)

Display board 2 loop Fire Control & Alarm Panel. (Make - Esser / Honeywell)

Display board 4 loop Fire Control & Alarm Panel. (Make: Bosch/GST, make to be provided as per direction of EIC.)

Supply & Installation of Periphery board / Mother board ( VDS / UL / FM / ULC approved ) in place of defective Periphery board in the existing Fire Control & Alarm Panel or as per sample installed at existing FDA panel as per direction of EIC.

Periphery board / Mother board 4 loop Fire Control & Alarm Panel. (Make: Siemens(UL))

Periphery board / Mother board 4 loop Fire Control & Alarm Panel. (Make: Siemens(EN))

Periphery board / Mother board 4 loop Fire Control & Alarm Panel. (Make - Esser / Honeywell)

Periphery board / Mother board 2 loop Fire Control & Alarm Panel. (Make - Esser / Honeywell)

Periphery board / Mother board 4 loop Fire Control & Alarm Panel. (Make: Bosch/GST/Apollo, make to be provided as per direction of EIC.)

Supply & Installation of Loop card for 12 loop ( VDS / UL / FM / ULC approved ) in place of defective Loop card in the existing Fire Control & Alarm Panel or as per sample installed at existing FDA panel as per direction of EIC.

Supply & Delivery of Analog Addressable Intelligent multisensor detector (VDS / UL / FM / ULC approved) with inbuilt optical smoke sensors as well as additional heat detector sensor with decentralise intelligence, soft addressable Photothermal type with inbuilt fault isolator as per NFPA style 7 wiring complete with base having IP as per recommended standard.(Note : Detectors without built-in fault isolator is also acceptable but in such case the contractor shall provide one independent fault isolator module for every group of addressable devices ( Numbers of addressable devices in a group will be as per latest recommended IS / NBC ) without any additional cost). or as per sample as per direction of EIC.

Multisensor detector (Make - Siemens(EN) / Cerberus Pro)

Multisensor detector (Make - Siemens (UL) / Cerberus Pro)

Multisensor detector (Make - Esser / Honeywell)

Multisensor detector (Make: Bosch/GST/Apollo, make to be provided as per direction of EIC.)

Supply & Delivery of Addressable Heat Detector (Fixed temperature cum rate of rise) ( VDS / UL / FM / ULC approved ) with twist lockable removal base, built - in fault isolator, drift compensation feature etc including connections as per specifications complete as reqd and having IP as per recommended standard(Note : Detectors without built-in fault isolator is also acceptable but in such case the contractor shall provide one independent fault isolator module for every group of addressable devices ( Numbers of addressable devices in a group will be as per latest recommended standards ) without any additional cost). or as per sample as per direction of EIC.

Heat detector (Make - Esser / Honeywell)

Supply & Delivery of Addressable Manual Call Point ( VDS / UL / FM / ULC approved )soft addressable type with in built fault isolator as per NFPA style 7 wiring complete as required. or as per sample as per direction of EIC.

MCP (Make - Siemens(EN) / Cerberus Pro)

MCP (Make - Siemens (UL)/ Cerberus Pro)

MCP (Make - Esser / Honeywell)

MCP (Make: Bosch/GST/Apollo,make to be provided as per direction of EIC.)

Supply & Delivery of Addressable Loop Powered Hooter ( sound output of minimum 90 db ) cum strobe (strength of light 10 cd)complete with inbuilt isolator & IP65 base and ( VDS / UL / FM / ULC approved) approved. or as per sample as per direction of EIC.

Loop Power Hooter (Make - Siemens(EN) / Cerberus Pro)

Loop Power Hooter (Make - Siemens(UL) / Cerberus Pro)

Loop Power Hooter (Make - Esser / Honeywell)

Loop Power Hooter (Make: Bosch/GST/Apollo,make to be provided as per direction of EIC.)

Supply & Delivery of Addressable transponder/ Monitor Modules/Relay Modules ( VDS / UL / FM / ULC approved ) for monitoring flow switches/Fire exit doors / AHU / Lift etc complete as required or as per sample as per direction of EIC.

Module (Make - Siemens(EN) / Cerberus Pro)

Module (Make - Esser / Honeywell)

Module (Make: Bosch/GST/Apollo,make to be provided as per direction of EIC.)

Supply & Delivery of LED type Response Indicator ( VDS / UL / FM / ULC approved) having 2 Nos. red coloured LED lamps including connections etc. or as per sample as per direction of EIC.

Response Indicator (Make - Esser / Honeywell)

Response Indicator (Make: Bosch/GST/Apollo,make to be provided as per direction of EIC.)

Supply & Delivery of MCP Glass in place of damaged oneas per sample installed at different building or as per direction of EIC. or as per sample as per direction of EIC.

MCP Glass (Make - Siemens / Cerberus Pro compatible)

MCP Glass (Make: Bosch/GST/Apollo/Agni compatible,make to be provided as per direction of EIC.)

Supply & Delivery of 2 Core 1.5 sq.mm FRLSH shielded copper Cable (For Loop) (Make: Havells/RR Kable/Polycab/Gloster) in existing prelaid PVC pipe as per direction of EIC.

Supply & Delivery of 3 Core 1.5 sq.mm FRLSH copper Cable (For power) (Make:Havells/RR Kable/Polycab/ Gloster) in existing prelaid PVC pipe as per direction of EIC.

Supply & Delivery of 6A 3 pin Top for fire control panel (Make-Anchor/Approved make)

TERMS & CONDITIONS :- The Agency must procure the materials from the Manufacturer / OEM or from their authorised sales channel so that the standard warranty / support of the Manufacturer / OEM becomes applicable to the products to be delivered and installed by them. Documents that authenticates such procurement from the Manufacturer / OEM or from their authorized sales channel and standard warranty / support should be sent from the e-mail of the Manufacturer / OEM / authorized sales channel to the e-mail of Engineer-in-Charge and hard copy of it to be submitted during execution, of work/ submission of bill. If any refurbished material is supplied and installed, penal action will be taken as per existing rules

Rate Should be quoted including GST,LWC & all other related taxes and duties.

Defect Liabibility Period 1 (One) year

Make & model of each and every material to be approved by EIC

Less cost for dismantled & unserviceable materials Rs. 15,000.00