REPAIR/MAINT OF WIRING AND CONNECTED ITEM RSSD, TSSD AT OD FORT CANTT UNDER GE (EAST) PRAYAGRAJ.

Amount

Taking down carefully copper/aluminium point wiring (light,fan,socket or power) of any type and any size complete including fixture and fitting such as switches, ceiling roses ,pendant, regulators, sockets, light fittings etc of any type, size and description on teak (light, fan, sockets and socket outlets etc) including removal of battens, pipes, plug sockets, socket outlets, switches, shades, ceiling roses, light fittings etc. complete and keeping in safe custody for resuse or for issue on credit to contractor as directed by Engr in Charge. and making good disturbed surface of walls/floors etc. to match with existing all as directed.

M&L for point wiring in concealed PVC conduit complete including necessary chasing, cutting with PVC insulated and unsheathed cable 1.5 sqmm (nominal area) multi stranded copper conductor single core and including non metallic concealed PVC conduit not less than 20 mm dia with concealed in wall pressed steel terminal boxes not less than 1.6 mm thick of reqd size (factory made) with top cover 3 mm thick of plastic laminated sheets of required colour painting terminal boxes inside and outside with two coats of block bituminous paint over a coat of red oxide primer complete with all accessories and including PVC insulated and unsheathed cable 1.5 sqmm (nominal area) stranded copper conductor single core of green col our as earth wire to common earth and connected to earth dolly drawn in same concealed conduit incl making good disturbed surfaces and finished to match with existing surface complete all as specified for the following:

One light/fan/exhaust fan point controlled by one switch

One bell point controlled by one switch

One 5 amp socket outlet point on same board

One 5 amp socket outlet point on an independent board

One 15 Amp socket outlet on Independant board but with PVC insulated and unsheathed cable 2.5 sqmm (nominal area) multi stranded copper conductor single core including PVC insulated 2.5 sq mm stranded copper conductor green colour as earth wire.

M&L for point wiring with Single core pvc (FRLS) insulated, Wiring with Copper conductor cables in PVC casing & caping of size 1.5 sqmm earth lead of same specification , drawing in & including pvc conduit medium grade not less than 25 mm dia, having wall thickness not less than 2 mm with all fittings with MS/CI sunk box of wall thickness not less than 1.2 mm thick sheet including one coat of red oxide primer on internal and external surface covered with 3 mm thick IS-2036 marked laminated sheet cover (for mounting switches, sockets, regulators etc.) for one light/fan/ 5 amp socket independent/ bell point controlled by one, one way switch, etc all as specified for the following:-

One light/fan/exhaust fan point controlled by one switch

One bell point controlled by one switch

One 5 amp socket outlet point on same board

One 5 amp socket outlet point on an independent board

One 15 Amp socket outlet on Independant board but with PVC insulated and unsheathed cable 2.5 sqmm (nominal area) multi stranded copper conductor single core including PVC insulated 2.5 sq mm stranded copper conductor green colour as earth wire

Sub main wiring complete with 2 runs of 4 sq.mm PVC insulated and unsheathed 1100V grade multistranded FRLS grade copper conductor cable drawn through in and including 20mm dia rigid PVC conduit medium grade and conduit accessories, concealed in stone / brick masonry walls, roofs, floors etc and connecting terminal ends to DB's including providing 1 run of 2.5 sq.mm PVC insulated unsheathed multistranded FRLS grade copper cable as earth continuity conductor and connecting to common earth dolly and making good disturbed surfaces to match with existing and including taking down, complete all as specified and directed. NOTE:- (i) Two runs of 4 sq.mm copper conductor, one run of 2.5 sq.mm copper earth continuity conductor and one run of PVC conduit and with accessories shall be measured as one unit length. (ii) Extra length of cable / wire required for connection to MCBs shall not be measured and the rate quoted per unit shall deemed to be inclusive of the same accordingly.

Sub main wiring complete with 2 runs of 6 sq.mm PVC insulated and unsheathed 1100V grade multistranded FRLS grade copper conductor cable drawn through in and including 20mm dia rigid PVC conduit medium grade and conduit accessories, concealed in stone / brick masonry walls, roofs, floors etc and connecting terminal ends to DB's including providing 1 run of 4 sq.mm PVC insulated unsheathed multistranded FRLS grade copper cable as earth continuity conductor and connecting to common earth dolly and making good disturbed surfaces to match with existing and including taking down complete all as specified and directed. NOTE:- (i) Two runs of 6 sq.mm copper conductor, one run of 4 sq.mm copper earth continuity conductor and one run of PVC conduit and with accessories shall be measured as one unit length. (ii) Extra length of cable / wire required for connection to MCBs shall not be measured and the rate quoted per unit shall deemed to be inclusive of the same accordingly.)

S&F switch piano, single pole one way 5 Amps 240 Volt capacity flush type all as specified and directed.

S&F Bell push flush type 5 Amps 240 Volt capacity all as specified and directed.

S&F 3 pin 5 Amps socket outlet flush type all as specified and directed.

S&F switch piano, single pole one way 15 Amps 240 Volt capacity flush type all as specified and directed.

S&F 3 pin 15 Amps socket outlet flush type multi purpose 2 in 1 type (3 pin 5 Amps and 15 Amps) all as specified.

S&F ceiling rose of suitable size of bakelite 240 Volts three terminal as specified and directed.

S&F electric bell ding dong type AC 230 volt 50 Hz single phase single pole all as specified and directed.

S&F stepped socket type electronic fan regulator flush type AC 230 volt 120 W suitable for any type of ceiling fan all as specified and directed.

S&F Lamp holder with lamp, PVC/ Polycarbonate type with back plate suitable for batten fittings complete all as specified and directed.

S&F Modular switch, single pole one way 6 Amps 240 Volt capacity flush type all as specified and directed.

S&F Modular Bell push flush type 6 Amps 240 Volt capacity all as specified and directed.

S&F Modular 3 pin 6 Amps socket outlet flush type all as specified and directed.

S&F Modular switch, single pole one way 15 Amps 240 Volt capacity flush type all as specified and directed.

S&F Modular 3 pin 15 Amps socket outlet flush type multi purpose 2 in 1 type (3 pin 5 Amps and 15 Amps) all as specified.

S&F Modular type electronic fan regulator step type AC 230 , 120W - 2 module volt suitable for any type of ceiling fan all as specified and directed.

S&F Modular White cover plate with frame, 2 module all as specified and directed.

S&F Modular White cover plate with frame, 4 module all as specified and directed.

S&F Modular White cover plate with frame, 6 module all as specified and directed.

S&F Modular White cover plate with frame, 8 module all as specified and directed.

S&F Modular metal flush box, 2 module all as specified and directed.

S&F Modular metal flush box, 4 module all as specified and directed.

S&F Modular metal flush box, 6 module all as specified and directed.

S&F in replacement of downlights with recessed mounted adjustable LED downlights made of extruded due cast aluminium housing and high power LED as a light source of system wattage - 6 Watt, Colour Temp - 6000 K, Minimum Lumen output- 800 Lm, cutout dia - 125mm, complete with including separate independent electronic LED driver and accessories pre-wired upto terminal block including making connection and testing complete all as specified and directed. Make:- Crompton cat part No. CDR-211-06-30-SL-NWH/ Philips cat part No. DN59OBMLED6S-6500PSUWHMB/ Bajaj Cat part No. BRDCSL-7W LED-WH

S&F in replacement of downlights with recessed mounted adjustable LED downlights made of extruded due cast aluminium housing and high power LED as a light source of system wattage - 12 Watt, Colour Temp - 6000 K, Minimum Lumen output- 800 Lm, cutout dia - 125mm, complete with including separate independent electronic LED driver and accessories pre-wired upto terminal block including making connection and testing complete all as specified and directed. Make:- Crompton cat part No. CDR-212-12-30-SL-NWH/ Philips cat part No. DN59OBMLED 15S-6500PSUWHWB/ Bajaj Cat part No. BRDCSL-12W LED-WH.

S&F in replacement for wall mounting warm light fitting polycarbonate body, decorative type unbreakable including 9 Watt LED lamp complete all as specified and directed. Make of Philips Cat No . Comet 30575/ Havell's Cat Part No: FLORETINE WL 1LS B22 SS /Mepro Cat. No AL-120

S&F in replacement of LED tube light fitting 1 x 18 watt, decorative , ultra slim round profile LED lighting fixture with co extruded polycarbonate body , environmental friendly , energy efficient complete with all accessories, prewired and in repairs ,making connection with and including 23/0.0076 flexible copper wire three core from connector to ceiling rose not more than 1.2 mtr, fixed on wall firmly complete all as specified and directed. Make:- Crompton cat part No. CCS-100-18-65HL2-DP-NWH/ Philips BN021CLED18SPSUCWGR/ Bajaj Cat part No. BCLAB18WLEDP

S&F in replacement of LED tube light fitting 1 x 20 watt, decorative , ultra slim round profile LED lighting fixture with co extruded polycarbonate body , environmental friendly , energy efficient complete with all accessories, prewired and in repairs ,making connection with and including 23/0.0076 flexible copper wire three core from connector to ceiling rose not more than 1.2 mtr, fixed on wall firmly complete all as specified and directed. Make:- Crompton cat part No. CCS-100-20-65HL2-DP-NWH/ Philips cat part No. BN021CLED22SPSUCWGR/ Bajaj Cat part No. BCLAB20WLEDP

S&F in repair energy efficient LED Mirror light of 10 Watt having minimum 1150 Lumen output, wide voltage protection range 140-270 Volt AC housed in co extruded polycarbonate body (enhances safety) with hifgh quality polycarbonate diffuser including making connection with two core PVC insulated, sheathed copper conductor cable of size 23/0.0076 compleet all as specified and directed. Make: Crompton cat part No. CCS-102-10-65-SL-DP-NWH/ Philips cat part No. BN021 LED 125 6500 PSU GR/ Bajaj Cat part No. BCLSB 10W WH

S&F in replacement of energy efficient LED bulkhead in co extruded polycarbonate body of system wattage- 9/10 Watt, Lumen output- 700 Lm, colour Temp- 6500 K having ingress protection- IP 65 for dust, water & IK 08 for external impact complete all as specified and directed. Make: Orient cat part No. L1 BHP-10C/ Bajaj cat part No. B1 BWP 10W LED/ Philips Cat part No. BY300PLED31757PSUPCINS2

S&F in replacement of LED ceiling mounted light fitting round or square 15 W ,230 volt LED 6000 K surface decorative type polycarbonate body, LED lighting fixture , environmental friendly , energy efficient complete with all accessories, prewired and making connection with and including 23/0.0076 flexible copper wire three core from connector to ceiling rose not more than 1.2 mtr, fixed on ceiling/wall complete all as specified and directed. Make:- Crompton cat part No. CDR-205-12-30-SL-NWH/ Philips cat part No. RC38OB DN296B LED 12S-6500PSUWH/ Bajaj Cat part No. BPSLR12WLED WHRDSD

Supply and fix in replacement of electronic meters single phase temper proof LCD display with polycarbonate cover 230 V AC, 10- 60Amp, accuracy class-I 50Hz, conforming to IS 13779, IP-54, with parameters to show data, time, current reading, load, PF, voltage and KWH complete all as specified and directed. Make-HPL/Secure Note:- Old existing meter will be deposited by the contractor in AGE E/M store yard

S & F in replacement of building security light LED 35 Watt pressure die casting aluminium body, heat resistant glass, IP 65 protection, inclusive of electronic driver and all accessories, fixing on wall/pole with GI pipe bracket made of GI pipe 25 to 40 mm light grade 1.2 m long bent to shape and in repairs ,grouting on wall with necessary MS nuts, bolts and washers all as specified and directed.

S&F in replacement of ceiling light with recessed mounted LED light luminaries of size 600 mm x 600 mm an independent isolated, electronic LED driver (SMPS based constant current supply) housed in CRCA powder coated sheet of system wattage- 36 watt maximum, Colour Temp - 3000 to 6500 K, Lumen output- 4200-4400 Lm, THD < 10%, PF > 0.95, having short circuit and surge protection upto 4 KVA with all connected accessories including making connection with three core PVC insulated, sheathed copper conductor cable of size 23/0.0076 complete all as specified and directed. Make:- Crompton cat part No. LCTLRF7-36-CDL/ Philips cat part No. RC38OB LED36S-6500G6L60W60PSUOD/ Bajaj Cat part No. BZRSQL 36L LED GXPROWH

Supply and Fix in replacement of Post top light 20 W , IP 65 light Warm White type to be fixed on brackets, nut bolts, reducer etc, and making electrical connection with copper cable all as specified and directed.

S&F in replacement of Robustly designed IP65/IK10 Bollard garden light 15W, Warm White type, Innovative desigh with uniformly lit diffuser at the upper portion acts a beacon of path guidence in a landscape environment light to be fixed on cement conctrete in bed in foundations filling and mass contrete and making electrical connection with copper cable all as specified .

S & F in replacement of Sheet metal enclosure for Double Door DBs TPN 4 Way 415 V with 200 amps rated bus complete with incoming/outgoing connection through proper size of lugs and cable glands, including taking down complete all as directed.

S&F in replacement of sheet metal enclosure MCB distribution board single pole & neutral 240 volts 8 way with IP-43 IK-09 protection double door complete with appropriate size bus bar and neutral link, fixed flush in wall including chases wall for fixing DB, including taking down and making good distributed wall surfaces all as specified and directed

S&F in replacement of sheet metal enclousre for MCB DB's SPN, 4 way, double door, 240 Volts with 200 Amp rated bus bars including taking down existing unserviceable MCB DB with incoming/ outgoing connection through proper suitable size of lugs and including taking down complete all as specified and directed.

S & F in replacement of MCB single pole 240 volt any rating from 5 to 40 amps , with rupturing capacity 10 KA , inculding providing thimble for out going cable .

S & F in replacement of MCB SPN 240 volt any rating from 5 to 40 amps , with rupturing capacity 10 KA ,inculding providing thimble for out going cable.

S & F in replacement of single pole and neutral enclosure with a two pin and earth plug and socket complete with one SP MCB 20 A, complete all as specified and directed.

S & F in replacement of 1100 Volts grade heavy duty cable of size 6 Sqmm twin core with PVC insulated aluminium solid conductor,served with inner seathing of PVC tape and overall PVC sheathed in service connections suspended by insulating hangers not more than 1 metre apart including 4mm suspension wire,including 20mm dia rigid PVC conduit medium grade complete all as specified and directed.

S & F in replacement of 1100 Volts grade heavy duty cable of size 10 Sqmm twin core with PVC insulated aluminium solid conductor,served with inner seathing of PVC tape and overall PVC sheathed in service connections suspended by insulating hangers not more than 1 metre apart including 4mm suspension wire,including 20mm dia rigid PVC conduit medium grade complete all as specified and directed.

S & F in replacement of 1100 Volts grade heavy duty cable of size 16 Sqmm twin core with PVC insulated aluminium solid conductor,served with inner seathing of PVC tape and overall PVC sheathed in service connections suspended by insulating hangers not more than 1 metre apart including 4mm suspension wire,complete all as specified and directed.

S & F in replacement of Duranto LED highbay 120W with fin ventilation technology for better thermal management and with cutting edge LED technology ,in repairs , giving electric connection and testing complete all as specified and directed by Engr-in-charge.

S & F in replacement of Ventilator fan 250 mm sweep,plastic type, white colour, plastic type ,easy maintenance quick dismantling of blades for easy cleaning performance robust motor for continuous running of fan and giving electric connection,in repairs, and testing complete all as specified and directed by Engr-in-charge.

S & F in replacement of Sheet metal enclosure for Vertical TPN DB 4 Way 415 V with 200 amps rated bus complete with incoming/outgoing connection through proper size of lugs and cable glands and With provision for 3 pole and 4 Pole MCCB as incomer and SP/TP complete all as specified and directed.MCBs as outgoings complete all as directed.

Supply and fixing in replacement of MCCB TPN 100 Amp, 415 volts 16 KA Thermal Release Range complete all as specified and directed.

Replacement of wall mounted Distribution Board factory made of size 600mm x 450mm x 150mm made of MS sheet 2.0 mm thick CRCA sheet with powder coated paint ,dust and vermin proof with front openable door and locking arrangement consisting of following accessories: a) MCCB 100A, 4 pole 25kA fixed magnetic and thermal release - 01 No (incoming) b) 3 phase and neutral bus bar copper LT 440V, 200 A (outgoing) c) Phase indication lamp LED type R,Y,B

Earthing complete with steel earth plate electrode 60cm x 60cm x 6mm thick buried directly in ground (earth pit not less than 2.25 metres deep below normal ground level) with top edge of plate not less than 1.5 metres below normal ground level, connecting to the Galvanized iron earth wire 4.0mm dia by means of bolts, nuts, check nuts and washers of galvanized iron and steel earthwire protected by provision of GI medium grade pipe 15mm bore including provision of concrete pit made from PCC (1:2:4) type B-1(using 20mm graded stone aggregates) with 17mm thick cover of RCC (1:2:4) reinforced with XPM (weight not less than 4 Kg/Sqm) and frame of angle iron 25 x 25 x 6mm with lugs 02 No and with 6mm dia MS bar handle made to shape, GI medium grade 20mm bore pipe for watering perforated at bottom, 1.75 metre long placed on top edge of earth plate, common salt & charcoal filling, test point made out of 17mm x 8mm FI with fixing arrangement, funnel, wire mesh and earth work in hard/dense soil, returning filling in and removal of surplus soil to a distance not exceeding 50 metres, all as per electrical plate No.5 of SSR Part-I connected to earth test point all as specified or indicated including testing on completion.

Supply,installation ,testing & commisioning of LT indoor type kiosk pedestal panel , factory made, cubical, powder coated with fabricated 3.15mm thick skeleton with angle iron/ flat iron frame work, bus bar chamber, front openable hinge door with locking arrangement and common openable hinged door from the rear side, floor mounting type and as per IS,and sitable size as given by manufaturing, comprising of following:- (a) INCOMING:- (i) Rectangular Aluminum strip of size 50 x 8 mm fixed on insulated mounting arrangement - 04 nos (ii) MCCB FP 250 Amps,with Microprocessor release 36 KA, adjustable type - 01 No (iii) Digital multifunction meter -01 No Make L&T (b) OUTGOING:- (i) MCCB 160 Amps FP 36kA-02 Nos

Mohit Enterprises

PITAMBARI TRADERS

Aawadh associates

SUNSHINE BUILERS

Airways Enterprises

M/S VIJAY SINGH