REPAIRS TO FLOORING, PLUMBING AND SANITARY FITTNGS IN TECHNICAL AREA ZONE I UNDER GE I RND RCIHYDERABAD

Amount

Demolition of PCC in ground floors and paving's not exceeding 15cm thickness (below or above ground level) complete including disposal of debris off the premises all as directed by Engineer in Charge.

Dismantling of floor, hearth or wall tiling including cement mortar bedding (but not backing) and removing the rubbish off the premises all as specified and directed.

M&L, 25mm thick PCC 1:2:4 type B-0 using 12.5mm graded stone aggregate as in flooring, finishing the surface even and smooth using extra cement including necessary formwork complete all as specified and directed.

M&L, coloured HEAVY DUTY FULL BODY vitrified tiles in floors of size 600 x 600 x 10mm thick, set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tile over and including screed bed or bedding layer 15mm thick in CM 1:6 complete all as specified and as directed complete all as specified and as directed. Note: Shade and design/pattern of tiles shall be as directed by GE.

M&L, 10mm thick coloured HEAVY DUTY FULL BODY vitrified tiles in skirting of size 600 x 100mm, set and jointed in neat cement slurry and pointed in coloured cement to match shade of tile over and including 10mm thick backing coat in CM 1:3 complete all as specified and as directed.

M&L, light coloured, double charged vitrified tiles in floors of size 600 x 600 x 9 to 10mm thick, set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tile over and including screed bed or bedding layer 15mm thick in CM 1:4 complete all as specified and as directed complete all as specified and as directed. Note: Shade and design/pattern of tiles shall be as directed by GE.

M&L, 9 to 10mm thick light coloured vitrified tiles in skirting of size 600 x 100mm, set and jointed in neat cement slurry and pointed in coloured cement to match shade of tile over and including 10mm thick backing coat in CM 1:3 complete all as specified and as directed.

M&L, 7 to 8mm thick coloured, joint free Non skid ceramic tiles of size 300 x 300mm, in floors etc., set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tile over and including screed bed or bedding layer 15mm thick in cement mortar 1:4 complete all as specified and as directed.

M&L, 7 to 8mm thick coloured, joint free Non skid ceramic tiles of size 400 x 400mm, in floors etc., set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tile over and including screed bed or bedding layer 15mm thick in cement mortar 1:4 complete all as specified and as directed. Note for item No 8 & 9: Shade, design/pattern of tiles shall be as approved by GE

M&L, coloured glazed ceramic tiles of size 300 x 450mm, 6 to 7mm thick in dado etc., set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tile over and including 10mm thick backing coat in CM 1:3 complete all as specified and as directed. Note: Design of tiles shall be as approved by GE

Demolition of stone slabs, tiles, cement concrete tiles/paver blocks of any description or thickness in floors, laid and bedded in any mortar including disposal of debris off the premises complete all as directed.

M&L, 18 to 20mm thick, approved machine cut, coloured Granite, factory polished, edges rounded in steps, cooking platform and the like laid over and including screed bed or bedding layer 20mm thick in cement mortar 1:4, pointing with white cement (1:2) using marble dust with admixture of pigment to match the shade of granite stone complete all as specified and directed.

M&L, 12 to 18mm thick machine cut coloured granite, factory polished, in wall lining, (veneering to wall) over 10mm thick backing coat in cement mortar 1:3 and pointing with white cement 1:2 using marble dust with admixture of pigment to match with shade of granite complete all as specified and as directed

M&L, 20-25mm thick machine cut kota stone slab in flooring /treads of staircase (single piece) laid over and including 10mm thick cement screed in CM 1:6, jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and as directed.

M&L, 20 to 25mm thick machine cut kota stone slab, in risers of steps, skirting over 10mm thick backing coat in cement mortar 1:3 jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and as directed.

M&L in repairs, 3mm thick homogeneous flexible PVC tiles/sheets confirming to IS, laminated plain coloured, marbled mosaic or mottled finish, laid with approved rubber based adhesive in floors complete all as specified and as directed. Note: The colour and the pattern shall be as approved by GE.

S&F in repairs, vitreous china wash hand basin white 550 x 400mm of size including cutting for and pinning in ends of brackets or erecting stand including brackets, PVC waste pipe and coupling of suitable size complete all as directed

S&F in repairs, vitreous china oval shaped wash hand basin, white or coloured of size 550 x 440mm or as per existing at site mounted on granite top including PVC waste pipe and coupling of suitable size complete all as specified and as directed.

S&F in repairs, vitreous china wash down water closet pan (pedestal pattern), white including connecting to trap and to flushing pipe, anti syphonage pipe etc., complete including fixing to floor with bolts, including provision of plastic water closet seat, white, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminized hinging device complete all as specified and directed.

S&F in repairs, floor mounted water closet with cistern, white including connecting to trap and to flushing pipe, anti syphonage pipe etc., complete fixing to wall with bolts all as specified and directed. Make: Hindware CAT No 20089 (S-10) and 21038 or techno commercially equivalent in Parryware or Jaquar

S&F in repairs, vitreous china squatting pan, ‘Orissa’ pattern of size 630 x 450mm, white, with integral foot rests, including connection to trap, and to flushing pipe, antisyphonage pipe, etc., complete including provision of cement concrete bedding in 1:5:10 and making good to floor complete all as specified and directed.

S&F in repairs, vitreous china Urinal, half stall type with sensor, white, including providing and fixing plugs, bedding urinal against wall in cement mortar (1:2), securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement; fixing grating and union for discharge pipe etc., complete all as specified and directed.

S&F in repairs, vitreous china Urinal, half stall type, white, including chromium plated urinal spreader, providing and fixing plugs, bedding urinal against wall in cement mortar (1:2), securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement; fixing grating and union for discharge pipe etc., complete all as specified and directed.

S&F in repairs, chromium plated Hand Shower (Health Faucet) with 8mm Dia 1.2meter long flexible tube and wall hook complete all as specified and directed. Make: Jaquar CAT No 573 or techno commercially equivalent in Hindware or Parryware

S&F in repairs, 10 litres, PVC valveless, symphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets complete all as specified and as directed.

S&F in repairs, 15mm bore angular stop valve, cast copper alloy, chromium plated fancy type, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron/GI pipe or for union complete all as specified and directed. Make: Jaquar model No KUP-CHR-35053PM or equivalent in Parryware or Hindware

S&F in repairs, 15mm bore 2 way bib cock, chromium plated with wall flange complete all as specified and directed. Make : Jaquar Model No FLR-CHR-5041N or equivalent in Parryware or Hindware

S&F in repairs, 15mm bore bib cock, long body, chromium plated with wall flange complete all as specified and directed. Make: Jaquar Model No CON-CHR-107KN or equivalent in Parryware or Hindware

S&F in repairs, 15mm bore Stop valve, cast copper alloy, chromium plated fancy type, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron/GI pipe or for union complete all as specified and directed.

S&F in repairs, 15mm bore Pillar taps, cast copper alloy, fancy type with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed complete all as specified and directed.

S&F in repairs, chromium plated towel rail 20mm dia, 'D' type, 600mm long, premium quality all as directed.

S&F in repairs, chromium plated fancy type soap dish, as in repair etc. complete all as specified and as directed.

S&F in repairs, plastic water closet seat cover, white, closed pattern with recessed bottom and cover aluminized hinging device complete all as specified and directed.

S&F in repairs, stainless steel grating round of size 100mm complete all as specified and directed.

S&F in repairs, PVC connections 15mm size with PTMT nuts of length 600mm, complete all as specified and directed.

S&F in repairs, 32mm dia PVC flexible waste pipe with fittings of suitable length as per site requirement for WHB/Sink or urinal complete all as specified and directed.

S&F in repairs, waste coupling of PTMT (half or full threaded) (Minimum weight 45grams), 32mm bore dia of discharge pipe complete all as specified and directed.

S&F in repairs, PVC flush bend with coupling suitable for low level flushing cistern complete all as directed.

S&F in repairs, 32mm bore, chromium plated bottle traps for wash basins with inlet and outlet screwed for pipe or connections including necessary packing, union and cap complete all as specified and directed.

S&F in repairs, 15mm bore steel water tubing, medium grade, ISI marked, galvanized, including all fittings such as bends, tees, elbows, reducers, unions, plugs, sockets etc., laid in trenches or fixed to walls and ceilings or concealed in walls and making good, ducts/ceilings or laid in floors complete all as specified and directed.

All as per item No 41 above but 20mm bore of pipe.

All as per item No 41 above but 25mm bore of pipe.

All as per item No 41 above but 40mm bore of pipe.

All as per item No 41 above but 50mm bore of pipe.

S&F in repairs, 500litres capacity triple layered rotational moulded polyethylene water storage tank (cylindrical vertical with closed top) hoisted and fixed in position including connecting up of existing inlet and outlet pipes and ball valve complete all as specified and as directed.

All as per item No 46 above but 1000litres capacity.

All as per item No 46 above but 2000litres capacity.

S&F in repairs, 15mm dia Gun metal, globe or gate valves with iron wheel head, ISI marked screwed both ends for iron/GI pipe and fixed complete all as specified and as directed.

All as per item No 49 above but 20mm globe or gate valve.

S&F in repairs, 110mm dia PVC(SWR) pipes, ISI marked, single socketed in any length with rubber ring joints laid in trenches or in floors or fixed to walls with suitable clamps complete all as specified and as directed.

S&F in repairs, 160mm dia PVC(SWR) pipes, ISI marked, single socketed in any length with rubber ring joints laid in trenches or in floors or fixed to walls with suitable clamps complete all as specified and as directed.

S&F, 110mm bore PVC(SWR) bends any radius complete all as specified and as directed.

S&F, 160mm bore PVC(SWR) bends any radius complete all as specified and as directed.

M&L, preparation of old plastered surfaces of walls and ceilings surfaces including cornices, pilasters etc., and applying one coat of distemper oil emulsion complete all as specified and directed.

SRI SAI ENTERPRISES

SM CONSTRUCTIONS

M/S SARASWATHI CONSTRUCTIONS

M/S K.SANJEEVA REDDY