Repairing Servicing Overhauling and commissioning of 100 KVA and 63 kva and 25 KVA Transformer at udyog vihar, sector 22 and Sector 23 under limit of Municipal Corporation Gurugram.

Amount

Bushing of required size and design to be used on the primary side of the transformer.

Bushings of required size /design to be used on the secondary side of the transformer

Buy back of old dismantle material (HT and LT coil, Rod, CT and PT, Old HT/LT cable, bushing, valve, gasket etc) with complete all respect.

Gas cutting of lit of sealed type transformer of required specification and size as per design of the transformer with all labour and material required to complete the job in all respect upto the entire satisfaction of the Engineer-in-charge of the work

HT tapex type cable boxes of required specification and size as per design of the transformer.

Magnetic type oil level gauge with low level alarm contact complete as per original design of the transformer.

Oil Drain valve, Filter valve and Dial type thermometer of appropriate design with max. Temp. Indicator complete with re-setting device and alarm contractor for transformer 100, 63 KVA etc. with complete all respect.

Oil Drain valve, Filter valve and Dial type thermometer of appropriate design with max. Temp. Indicator complete with re-setting device and alarm contractor for transformer 100,63 KVA etc. with complete all respect.

Repair and testing including over hauling of 11kv LT Coil and LT Rod 100, 63 and 25 KVA Transformer replacement of its defective coil/rod.

Repair and testing including over hauling of 11kv LT Coil and LT Rod 25 KVA Transformer replacement of its defective coil/rod.

Repair and testing including over hauling of 11kv HT Coil and HT Rod 63 KVA Transformer replacement of its defective coil/rod.

Repair and testing including over hauling of 11kv HT Coil and HT Rod for 100 KVA Transformer replacement of its defective coil/rod.

Repairing of 11 kv high tension CT and PT meter panel with all labour and material required to complete the job in all respect upto the entire satisfaction of the Engineer-in-charge of the work.

Supply and erection high tension 11 kv High tension DO switch complete handleandamp,clamp with all labour and material required to complete the job in all respect upto the entire satisfaction of the Engineer-in-charge of the work.

Supply and erection high tension 11 kv High tension GO switch complete handleandamp,clamp with all labour and material required to complete the job in all respect upto the entire satisfaction of the Engineer-in-charge of the work.

Supply and erection high tension 11 kv High tension XLPE joint kit, indoor nad outdoor terminal block (TTB) ringh jupmer with all labour and material required to complete the job in all respect upto the entire satisfaction of the Engineer-in-charge of the work.

Tapping connections, insulation on tap leads, brazing by silver brazing rod, dressing of tap leads with insulation paper, Star/ Star connection by new EC grade Copper on HV and LV side.

Transformer 100KVA tank repairing charge for electrical welding complete all respect.

Transformer 25 KVA tank repairing charge for electrical welding complete all respect.

Transformer 63 KVA tank repairing charge for electrical welding complete all respect.

Dehydration and filtration of dirty transformer oil for transformer with dehydration filter machine.

Loading and unloading of transformer at both side, hiring of crane, and transportation charges to and fro, Supervision and commissioning charges.

Painting charge after short blasting from inside and outside of the transformer 100 KVA, 63 KVA, and 25 KVA tank having hot oil resistant paint including radiator tubes and conservative tanks and other accessories with suitable primer and two coats of paint on transformer before cleaning of tank with complete all respect.

Painting charge after short blasting from inside and outside of the transformer 100, 63, 25 KVA tank having hot oil resistant paint including radiator tubes and conservative tanks and other accessories with suitable primer and two coats of paint on transformer before cleaning of tank with complete all respect.

Supply and topping of 200 KVA and 315 KVA transformer Silicone Transformer Oil - High Dielectric Strength Fluid in conservator tank and including replacement of dirty silica gel in transformers.

S/E of XLPE (E)11 KV HT 95sqmm 3 core aluminum PVC conductor armoured cable ISI mark laid in existing pipe /trenches/surface with all labour and material required to complete the job in all respect upto the entire satisfaction of the Engineer-in-charge of the work. Make- Polycab, Havells, RR, Grandly

S/E of XLPE (E)11 KV LT 240 Sq. mm 3 Core PVC aluminum conductor un-armoured cable ISI mark laid in existing pipe /trenches/surface with all labour and material required to complete the job in all respect upto the entire satisfaction of the Engineer-in-charge of the work. Make- Polycab, Havells, RR, Grandly

DHEERAJ ENTERPRISES