M/R to Directorate of Food and Drugs Administration Building Complex at Bambolim. SH- Clearing of bushes and other repair works in Food and Drugs Administration and Laboratory Building Complex at Bambolim.

Clearing jungle including up rooting of rank vegetation grass bush wood trees and sapling of girth upto 30 cm. measured at a height of 1 m above ground level & removal of rubbish upto a distance of 50 mt. outside the periphery of the area cleared. (if however only grass is met with the area will be measured and paid for under item 4001).

Surface dressing of ground including removing vegetation in equalities not exceeding 15 cm deep and disposal of rubbish lead upto 50 m and lift upto 1.5 m.;Hard soil

Cleaning of RCC storm water gutter including removal of debris and disposal of the same from the premises

Cleaning the night soil waste chamber, sludge and other waste by removing the cover slabs and relaying including disposal of sludge by excavating pits and covering the same with mud as per directions of Engineer in charge

Suction and disposal of night soil by sewage suction tanker of 6000litres capacity including Govt dumping charges, 20m hose pipe and attendant for vehicle suction.

(A) By tipper truck including loading unloading and stacking;(A) Limebuilding rubbish manure sludge moorum excavated rock;Limemoorum building rubbish;Beyond 5 upto 10 km per km

20 MM DOOR SHUTTER:-;Providing & fixing 20 mm door shutter Yashashri make or equivalent made by using 20mm x 155mm x 1.2mm upvc multi-cavity section and boarder of 30mm x 40mm x 2.5mm Upvc multi cavity section. The corners are joined by inserting polymetric corners & hardware used for fixing the door shutter is stainless steel hinges & S. S. handle & S.S. tower bolt. The average weight of 20mm door shutter is 4.60kg per sq mtr. These Upvc sections are tested by using BS 2782 & DIN 53459 test methods.

UPVC ONLY DOOR FRAME:-;Providing & fixing Upvc Door Frame Yashashri make or equivalent made out of Upvc extruded multi cavity frame of 60 mm x 60mm x 2mm wall thickness. Frame is reinforced with G.I. Channel & welded in corners with Average weight 0.80 kg per running mtr. These frames are tested by using BS 2782 & DIN 53459 test methods.

Removing and refixing of door/ window shutters paneled or paneled and glazed including replacing of existing hionges chiseling etc complete as directed by Engineer - in - charge;Above 1 Sq.m area

FRP (Fiber Reinforced Polymer) Frames with Wood Finish Manufacture, Supply and Installation (with anchor fastener) of EPEE or equivalent Goan make FRP (Fiber Reinforced Polymer) Frame of cross section as per options below with right angle joint and FRP (Fiber Reinforced Polymer) laminate made from 450 grams per sq.mts (gsm) chop strand glass fiber (matt) and unsaturated polyester resin with viscosity range of 400/450 centipoises per second (cps). The core of frame would be filled with seasoned wood as infill material. The slot of frame for door resting will be of suitable width so as to take specified thickness door. The frame will be water proof as well as mild acid/ alkali resistant manufactured in an ISO 9001- 2015 certified company. c)4" x 2 ½ "