REPAIR TO ROOF TREATEMENT, SEAPAGE, LEAKAGE, JOINERY AND SANITARY FITTINGS AT CERTAIN OTM AND SINGLE LIVING ACCN AT NAD VAJRAKOSH AREA AND REPAIR TO ROOF TREATEMENT, SEAPAGE WOODEN ALUMINIUM JOINERY INCLUDING TOILET BATHROOM SUNKEN FLOOR AT

Amount

Dismantling/taking out existing hessain base felt or any other existing water proofing treatment from roof including cement plaster and exposing the top surface of RCC slab including removing the dismantled debris to a distance exc 200m & n.exc 250m. all as specified and directed

M & L for rendering 15 mm thick in cement and sand mortar 1:4 on fair faces of brick or concrete surfaces with mixed water proofing compound finished even and smooth without using extra cement all as specified and as directed.

M/L for water proofing treatment by applying oil bound bitumen primer, having a density of 0.87 - 0.89 Kg/lit, @ 0.40 ltrs/Sqm, providing and laying APP modified water proofing membrane weighting not less than 3.50 Kg/Sqm of approved make including minimum 10 cm side lap and 15 cm end lap, laid and pasted with blue flame torching applications and finally finishing with two coats of solar reflective bituminous aluminium paint @ 0.1.Kg/Sqm all as specified and directed.

Repair of Cracks by Cutting out cracks to V-section in existing roofs or terracing, cleaning out and filling solidly with a hot mixture of bitumen and clean dry sand 1:1 (by weight)

“M & L for applying two coats of Smart care damp proof of Asian Paints by roller/brush over a coat of primer with smart care damp proof 33 % dilution of Asian paints including preparation of existing WALL surface by complete removal of existing treatment by means of chipping the surface to remove loose particles and mortar and clean the surface with wire brush and water wash etc including filling & coving with smart care repair mortar (wherever required), filling of crack filler with smart care crack filler of Asian Paints (wherever required) complete all as per manufacturer’s instructions, all as specified and as directed by Engr-in-Charge. (Make : Asian Paints Smart care Damp proof).

Dismantling of single layer Mangalore pattern or similar tiles in roofing all as specified and directed.

M&L roof tiles, Mangalore pattern class 'AA', interlocking at side joints, laid dry complete all as specified and directed.

M & L for Ridge or hip tiles to suit Mangalore pattern or roofing tiles, bedded and jointed in cement mortar 1:6 complete all as specified and directed.

Demolition of Cement cocrete of any description and any position all as specified and directed.

M & L for cement concrete type C1 1 : 3 :6 (20 mm graded aggregate) in roof kerbs or mud stops, or beading for tiles etc chamfered at edges complete all as specified and directed.

Dismantling of galvalume aluminium zinc coating GI based plain or corrugated steel sheets of any thickness in roofing all as specified and directed.

S&F pre- painted Galvalume Aluminium Zinc coating GI based corrugated steel sheets 0.5 mm thick of any colour having tensile strength 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed.

Dismantling of wrought iron or mild steel work of any description all as specified and directed.

S&F for mild steel rolled sections as in main and cross beams, hip and jack rafters; purlins where connected to common rafters and running rails and guides for sliding doors; fixed with angle cleats or other connecting plates confirming to Fe 410 -W (Gde- E- 250) quality- A including necessary welding complete all as specified

Dismantling boarding, any description, fixed any position fixed with screws all as specifed and directed.

M&L 18 mm thick PVC ply both sides plain as in cupboards including solvent cement, stainless steel hinges/handles, SS screws etc as per manufactures instructions complete all as specified and directed. Make of PVC ply shall be M/s Rajshree Plastiwood Ltd or equivalent in M/s Sintex industries Ltd/M/s Everst Composites Pvt Ltd as approved by GE

S & F in repair stainless steel channels, 50 cm to 60 cm long suitable for moving the draws complete all as specified and directed

S & F in repairs 19/20 mm dia stainless steel tubular pipe as in curtain rod including stainless steel brackets and fixing with SS screws complete all as specified and directed.

S&F in repair aluminium (Die cast ) body door closer hydraulically regulated designation No-3 universal type suitable for door shutters of 85 to 1000mm in width and of weight between 61 yo 80 kg complete all as specified

M&L for double action floor spring hydraulically regulated made up minimum 1.25mm thick aluminium alloy sheet foundation box main body with stainless steel cover governing pivot made of brass other parts made of mild steel heavy duty including taking down un-serviceable floor spring complete all as specified.

S&F in repair 5mm thick tinted glass in aluminium doors & windows with rubber packing including hacking out old broken glass ( any thickness, size from aluminium beading ) complete all as specified and directed

S&F Aluminium grills of DG 104(10mm) powder coated of make Decogrill or equivalent including dismantling of old unserviceable alumunium grill all as specified and directed

S&F in repair 12 mm thick partical board medium density,flat pressed, single layer type or three layer type with BWR type adhesive, fixed in Aluminium frame complete all as specified.

S&F in repair mortice lock vertical type 4- levers of 100mm brass body with two keys complete all as specified

Supply and fix in repair floor door stopper of aluminium alloy body and tongue, anodized with hard drawn steel spring over all length of plate 140mm complete all as spfd and directed

Demolation of precast block masonry with solid blocks massonry built in cement mortar or cement lime mortar complete all as specified and as directed.

M & L for precast block masonry with solid blocks massonry type C1, 1:3:6 using 20mm graded stone aggregate with solid block exc 10cm in width and set in cement mortar 1:6 complete all as specified and as directed.

M & L rendering 10mm thick in cement mortar 1:6 on fair faces of concrete/brick work surfaces finished even and smooth complete all as specified and directed.

M&L two coats of oil bound distemper on newly plastered surfaces of wall including including preparation of surfaces, complete all as spfd and directed.

Dismantling of wall and ceiling boards (fibre, pulp, insulation) or insulation boards /slab /blankets of any description and thickness including frame/grid of any description all as specified and directed

S&F for Anodised Aluminium snap grid (minimum 15 microns anodisation) of size 605 x 605 mm with anodized aluminum angle of size 40mm x 25mm x 2mm thick weighing 0.36 Kg per running meter and anodized aluminum main and cross T of size 36.50 x 23.50 x 1.50 mm thick weighing 0.254 Kg per running meter and 23.50 x 23.50 x 1.50 mm thick weighing 0.202 Kg per running meter respectively for false ceiling all as specified and directed

Description all as per ser item No 31 above but fixing only i.e using old servicable aluminium angle and Tee etc obtained from item No 33 here-in-before complete all as specified and directed

S&F in repair hangers 6 mm dia. G.I. (upto 1200mm length) adjusting level fixed to roof slabs by means of ceilling cleats made out of G.I. flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5mm dia. 40mm long suitable for size of snap grid 605 x 605 mm complete all as specified and directed.

M&L for Gypsum board 12mm thick in ceiling fixed with screws on snap grid all as per manufacturer instructions.

Description all as per ser item No 34 above but fixing only i.e using old servicable Gypsum board obtained from item No 30 here-in-before complete all as specified and directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and removing all the rubbish as directed by Engineer-in-charge complete all as specified and directed.

M&L screed bed or bedding layer 20mm thick in cement motar 1:4 to receive topping layer such as tilling etc complete all as specified and directed

M & L rendering 10 mm thick in cement mortar 1:4 on fair faces of concrete/brick work surfaces finished fair and even without using extra cement to receive tiles complete all as specified and directed.

M & L for non skid ceramic coloured tiles (Ist quality) 7 to 8 mm thick (Square/rectangular), area of each tile exc 0.06 Sqm but n.exc 0.11 sqm as in floors etc set and jointed in neat grey cement slurry and pointed in white or coloured cement to match complete all as specified and directed.

Description all as per item No 39 above but in vertical surfaces such as skirting, dado etc complete all as specified and directed.

M&L for Glazed ceramic tiles in vertical surface 300x200mm x 7mm thick, set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed.

M & L for non skid ceramic coloured tiles (Ist quality) 7 to 8 mm thick (Square/rectangular), area of each tile exc 0.11 Sqm but n.exc 0.18 sqm as in floors etc set and jointed in neat grey cement slurry and pointed in white or coloured cement to match complete all as specified and directed.

Description all as per item No 42 above but in vertical surfaces such as skirting/Dado etc complete all as specified and directed.

M & L for vitrified ceramic tiles dark coloured shade, double charged (Ist quality), 10 mm thick (Square/rectangular), area of each tile exc 0.36 sqm and not exc 0.42 sqm as in floors etc set and jointed in neat grey cement slurry and pointed in white or coloured cement to match complete all as specified and directed.

Description all as per item No 44 above but in vertical surfaces such as skirting/dado complete all as specified and directed.

Demolition of stone slabs and tiles of any description in floors laid dry.

M&L for machine cut kota stone slab flooring 20-25mm thick, laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and mirror polishing complete all as specified and directed (Size of kota stone shall not be less than 60x60cm)

Description all as per item No 48 above but as in skirting/Dado etc

Taking down cement plaster on brick or concrete surfaces of wall/ceiling and likes including racking out joints, hacking for keys scrubbing down with water etc any description including removal of rubbish outside MoD land, complete all as specified and directed. Note : The rate quoted by the Contractor is deemed to be included necessary scafolding and form works.

M & L for 15mm Rendering in Cement Mortar ( 1:4) complete all as specified and directed.

Demolition of un-reinforced cement concrete in ground floor and pavings n exc 15 cm thick (below or above ground level) and removing all the rubbish as directed by Engineer-in-charge complete all as specified and directed

M&L 75mm thick PCC (1:3:6) type-C2 using 40 mm graded stone aggregate as in hardstanding/plinth protection and finishing the concrete surface even and smooth without using extra cement complete all as specified and directed.

M&L machine pressed coloured glossy finished precast conctete interlocking paver block any shape and size confirming to IS 15658-2006 of 60 mm thickness, M-35 Grade with grey cement and pigment laid over and including sand cushion of 50mm thick complete all as specified

M&L 100 mm thick PCC 1:4:8 type D-2, using 40mm graded aggregate finished even and fair complete all as specified.

Taking down wooden/PVC/FRP/aluminium chowkats or frames with shutters (without taking off shutter from the frame ), area exc 1.5 sqm but n.exc 4 sqm each including making good disturbed portion to match with adjoining surfaces and offering credit as per schedule of credit all as specified and directed.

All as per item No 56 above but n.exc 1.5 sqm all as specified and directed..

S&F mild steel articles such as bands, straps, supports or stays for rain water, holdfasts etc conforming to Fe- 290(Gde E-165) all as specified and directed.

M&L for Plain cement concrete (1:2:4 ) type B1 using 20mm graded aggregate as in coping, hold fast, cills, steps, water troughs and the like including weathering,slightly rounded or chamfered angles and throating etc. complete all as specified and directed

S & F factory made PVC door frames of size 50mm x 47 mm made out of 5 mm plain colour PVC sheet reinforced with MS square tube suitable for opening as per site condition complete all as specified and directed all as per SSR Part II complete all as specified and directed.

S&F factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tube for top and bottom rails. MS frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail and bottom rail on either side and as gap insert for top rail and bottom rail, paneling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles and rails with suitable PVC sheet beading and joined together with solvent cement complete all as specified in drawing on sl page No 156 of SSR 2010 part –II complete all as specified and directed

M&L for flush shutters 40mm thick with ,solid core construction with particle board core and plywood face panels and both sided laminated with decorative face veneers with lipping/frame to match complete all as specified and directed.

M & L for plain solid straight chowkats and frames 2nd class hard wood, wrought framed, rebated on the solid, rounded or chamfered, put together with glue pinned at joints complete all as specified and directed.

S&F for aluminium powder coated (minimum thickness of powder coated 50 micron) frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc including taking down old frames complete all as specified and directed.

S & F for aluminium powder coated (minimum thickness of powder coated 50 micron) door shutters, aluminium section weighing 0.55kg/m including necessary joining cleats, glazing clips, rubber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminium snap beading, screws etc. complete all as specified and directed.

S&F aluminium powder coated (minimum thickness of powder coated 50 micron) window/ventilator shutters, sliding type without sash bars, aluminium sections weighing not less than 0.55kg/m including necessary jointing cleats, glazing clips, rubber neoprene packing, aluminium snap beading, screws etc compelte all as specified and directed.

S&F for aluminium anodized frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc including taking down old frames complete all as specified and directed.

S&F aluminium anodized for window/ventilator shutters, sliding type without sash bars, aluminium sections weighing not less than 0.55kg/m including necessary jointing cleats, glazing clips, rubber neoprene packing, aluminium snap beading, screws etc compelte all as specified and directed.

S&F in repair aluminium alloy wire cloth, 0.45mm nominal dia of wire & average width of aperture 1.40mm and fixed with aluminium wire staples all as specified and directed.

M&L 4mm thick sheet glass, ordinary quality and glazing with wooden beading not exc 0.5 Sqm in each pane all as specified and directed.

Supply & fix butt hinges 100mm size, type B-21 complete all as specified and directed

S&F Aluminum alloy sliding door bolt 300 mm long and not less than 12mm dia with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy all as specified and directed.

S&F extruded aluminum alloy handles, fabricated type and powder coated, 100mm size all as directed.

S&F extruded aluminum tower Bolts 125mm long

M&L for Two coats of synthetic enamel paint over a coat of pink primer on New wooden surfaces of any description over 10cm width or girth including preparation of surfaces all as specified and directed.

M&L for Two coats of synthetic enamel paint over a coat of red oxide primer on new steel surfaces of any description over 10cm width or girth including preparation of surfaces all as specified and directed.

Taking up or down GI tubing 15mm bore and connections all as directed

Taking up or down GI tubing 20mm bore and connections all as directed

Taking up or down GI tubing 25mm bore and connections all as directed

Supplying and laying of CPVC pipes SDR 11 & plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified of dia 16 mm

Supplying and laying of CPVC pipes SDR 11 & plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified of dia 20 mm

Supplying and laying of CPVC pipes SDR 11 & plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified of dia 25 mm

Taking down eaves gutters and rainwater pipes (any size or pattern), including all fittings,heads,shoes,bends,swan-necks etcall as specified and directed.

M&L for PVC (SWR) pipe single socketed in any length with rubber ring joints fixed to wall 110mm bore,

M&L for PVC (SWR) pipe single socketed in any length with rubber ring joints fixed to wall 75mm bore.

S&F fixing 75mm dia PVC (SWR) bend all as specified and directed

S&F fixing 110mm dia PVC (SWR) bend all as specified and directed

S & F PVC (SWR) 75 mm branch piece, single (single Y) equal or unequal all as pecified and directed

S & F PVC (SWR) 100 mm branch piece, single (single Y) equal or unequal all as pecified and directed

Dismantling of PVC/ RCC water storage tank of capacity exceeding 250 litre but not exceeding 500 litre, including removal of rubbish outside MoD land, complete all as specified.

Dismantling of PVC/ RCC water storage tank of capacity exceeding 500 litre but not exceeding 1000 litre, including removal of rubbish outside MoD land, complete all as specified.

S&F Rotational moulded PVC, double layered, water storage tanks of capacity 500 litre (cylindrical vertical with closed top), ISI Marked, hoisted and fixed in position, complete all as specified.

S&F Rotational moulded PVC, double layered, water storage tanks of capacity 1000 litre (cylindrical vertical with closed top), ISI Marked, hoisted and fixed in position, complete all as specified.

S & F in repair 20 mm dia Ball valve, high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball, ISI marked (Minimum weight 210 gms), screwed & suitable for iron pipe 20 mm bore, complete all as specified.

Draining out water, cleaning and removing accumulated slufge/dirt scales from tank bottom, side and from moiths of circulating pipes of service tank of capacity not exceeding 500 ltrs, located on roof of the building and disinfecting the tank using bleaching powder to make the tank bacteria free,complete all as specified and directed.

Draining out water, cleaning and removing accumulated sludge/dirt scales from tank bottom, side and from mouths of circulating pipes of service tank of capacity exceeding 500 ltrs but not exceeding 1000 ltrs, located on roof of the building and disinfecting the tank using bleaching powder to make the tank bacteria free, complete all as specified and directed.

M&L for writing letters or figures (Block,Roman, Italic or Indian) n exc.30 cm high complete all as specified and directed.

S&F in reapir 15 mm dia gun- metal globe or gate valves, with iron wheel head screwed both ends for iron pipe & fixed in repair, complete all as specified and as directed.

S&F in repair 20 mm dia gun- metal globe or gate valves, with iron wheel head screwed both ends for iron pipe & fixed in repair, complete all as specified and as directed.

S & F in repair PVC water tank cover including necessary PVC fixing & locking device fixed with stainless screws suitable for 500 Ltrs water tanks all as specified and directed

S & F in repair PVC water tank cover including necessary PVC fixing & locking device fixed with stainless screws suitable for 1000 Ltrs water tanks all as specified and directed

Excavation over areas not exec 1.5m in depth and getting out in hard/dense soil complete all as specified and directed

Returning, filling in with excavated soil including spreading levelling, watering and well rammingin layers n, exc 25cm thick complete all as specified and directed

All as per Srl item No. 08 above but except tiles

M & L for cement concrete type B0 1 : 2:4 (12.5 mm graded aggregate) as in roof kerbs/paddings or mud stops or bedding for tiles etc chamfered at edges complete all as specified and directed.

M & L for cement concrete 1:5:10 type F2 using 40 mm graded stone aggregate as in filling in sunken floors all as specified and directed.

Supply only water proofing compound.

M & L 40 mm thick cement concrete type B-0 1:2:4 (using 12.5 mm graded stone aggregate) finishing cement concrete surfaces even and fair complete all as specified and directed

M&L for Framed work Fe 410-W(Gde-E250)Quality A as in doors or gates of angle or other sections with gusset plates ,rail braces etc complete drillled for fixing of steel sheeting or other covering ,doors etc to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheetingor other covering running rails and guides)and hanging also fastening complete

M & L for providing 15mm thick rendering over roof slab in Cement Mortar (1:4) mixed with water proofing compound @ 3% by weight of cement, finished even and smooth surface without using extra cement all as specified and directed

S & F in repair 18 mm/ 19 mm thick prelaminated particle board, interior grade, prelaminated both sides with decorative choice lamination for wooden and fixed with screws to timber frame as in cupboards, shutters, shelves, pelmet etc. including fixing 18 mm wide 6 mm thick beading of Ist class HW (Teak) all around, complete all as specified and directed by Engineer-in-Charge.

Supply and fix in repairs continuous (Paino) hings,mild steel bright finish or electrogalvanized width of flap 30 mm (when open) all as specified and directed.

Fixing only in repair Door closer hyraulically regulated universal type suitable for door shutter 851 to 1000mm width and weight between 60 to 80 Kg. Note :Hydraulic door closer will be supplied under schedule B stores

M&L II class hardwood 30mm thick ,framed panelled door shutters (any no of panels)with panels of timber flat on both sides or of veneered particle board medium density wood particle board with commercial face veneers supplied and fitted to chowkats etc complete all as specified and directed.

M&L for mild steel flat iron holdfast for securing new wooden frame and similar articles conforming to FE 290 Gde-E-165 all as specified and directed

M&L cement concrete block 1;2:4 type B1 using 20mm graded stone aggregate in holdfast block including necessary formwork etc complete all as specified and directed.

S & F Mild steel but hinges medium weigtht 100 mm long

S&F 150mm aluminum anodized barrel tower bolts of extruded section

S&F extruded aluminum alloy handle fabricated type anodized 150mm

Fixing only in repairs bib taps any type 15mm bore including cleaning and making tap functional all as directed. Note:Bib Tap will be issed under schedule B stores

Fixing only in repairs 20mm High pressure float valve for pressure 0.175Mpa and above Note:Float valve will be issed under schedule B stores

Fixing only in repairs kitchen sinks with plugs, washers and wastes; including bedding in cement mortar on to dwarf walls, or including fixing cantilever brackets and connecting union to waste pipe; upto 0.5 sqm each Note:Kitchen sink will be issued under schedule B stores

Fixing only in repairs stainless steel kitchen plate racks of 1 mm thick including assembling of overall size 900mmx 900 mm as per trade pattern complete all as specified and directed by Engineer-in-Charge Note:stainless steel kitchen plate rack will be issed under schedule B stores

All as per sl item no 27 above but except blocks

Fixing only in repair floor door stopper of aluminium alloy body and tongue, anodized all as specified and directed Note:Aluminium door stopper will be supplied from Schedule B stores

M&L for Machine cut cuddapah stone slab 20-25mm thick over cement screed base ,laid and jointed with grey cement slurry mixed with pigment to match the shade of slab including rubbing and polishing.

Description all as per item No 125 above but as in skirting/Dado etc

S&F aluminium alloy wire cloth, 0.45mm nominal dia of wire & average width of aperture 1.40mm and fixed with aluminium wire staples all as specified and directed.

M&L 4mm thick sheet glass, ordinary quality and glazing with wooden beading not exc 0.5 Sqm in each pane all as specified and directed.

S&F in repair 5mm thick froasted glass in aluminium doors & windows with rubber packing including hacking out old broken glass ( any thickness, size from aluminium beading ) complete all as specified and directed

Fixing only in repair Rotational moulded PVC, double layered, water storage tanks of capacity 500 litre (cylindrical vertical with closed top)hoisted and fixed in position, complete all as specified. Note: Water tank will be issued under schedule B store item

Fixing only in repair Rotational moulded PVC, double layered, water storage tanks of capacity 2000 litre (cylindrical vertical with closed top)hoisted and fixed in position, complete all as specified. Note: Water tank will be issued under schedule B store item

Fixing only in repair 25 mm dia gun- metal globe or gate valves, with iron wheel head screwed both ends for iron pipe & fixed in repair, complete all as specified and as directed.

Fixing only in repairs high or low level flushing cistern not exc 10 ltr capacity and connections to pipes and fixing of chain and pull or lever after cleaning the inside of all dirt, scale formation, replacement of rubber washers stopping of leakage etc complete all as directed.

S/F in repair vitreous china wash down water closet (pedestal pattern) white, with plastic water closet seat & back with flat bottem and cover, MS chromium plated or aluminium anodised hinge device including fixing bolts and necessary connection with existing pipes etc complete all as directed.

VKD CONSTRUCTION (BID ID -3189313)

Ms V. S. NAYAK (BID ID -3185666)

SIRI SALES AND SERVICES (BID ID -3189279)