Material Saha Raste kam Karne

Amount

Excavation for roadway in earth, soil of all sorts, sand, gravel or soft murum including dressing section to the required grade, camber and side slopes and conveying the excavated materials with all lifts upto a lead of 50m. and spreading for embankment or stacking as directed. By Mechanical Means Spec. No.: MORTH 301

Transportatin Of excavate material 2Km/Chart

Supplying hard murum/ kankar at the quarry site, including conveying and stacking complete. Spec : MORTH 408

Spreading hard murum for side width etc. complete Spec : MORTH 408

Compacting the hard murum side widths including laying in layers on each side with power roller including artificial watering etc. complete. Spec : MORTH 408

Providing, laying, spreading and compacting stone aggregates of specific sizes to water bound macadam specification including spreading in uniform thickness, hand packing to proper grade and camber, applying and brooming requisite type of screening/ binding Materials to fill up the interstices of coarse aggregate, watering and compacting with Intelligent Compactor with compaction analyzer and V-Sat attachment. to the required density. By Manual Means Grading I a) (Using Screening Crushable type such as Moorum or Gravel) Spec. No.: MORTH - 404

Providing, laying, spreading and compacting stone aggregates of specific sizes to water bound macadam specification including spreading in uniform thickness, hand packing to proper grade and camber, applying and brooming requisite type of screening/ binding Materials to fill up the interstices of coarse aggregate, watering and compacting with Intelligent Compactor with compaction analyzer and V-Sat attachment. to the required density. By Mechanical Means Grading II b) (Using Screening Type B (11.2 mm Aggregate) Spec : MORTH - 404 208/42 B iii b / 23

Supply 60 to 80 mm Metal

Spreading 60 to 80 mm Metal

Supply 40 mm Metal

Spreading 40 mm Metal

Rolling For 10 M.T. Roller -Metal

Providing and laying modified penetration macadam surface75 millimeter thick including supplying all materials spreading trap metal layers and key aggregate heating and spraying bitumen at the rate of 200Kg/100 sq.mt. and compaction with power roller Excluding prime/tack coat Using V30 grade Bulk(Item to be used for V.R and O.D.R. road works only as per Sp-20 with prior permission of Superintending Engineer) Spec : As per MORTH specification Fifth Edition Clause No.507 and IRC-SP-97-2013 214/57 a / 23 MORTH

Providing and laying modified penetration macadam surface50 millimeter thick including supplying all materials spreading trap metal layers and key aggregate heating and spraying bitumen at the rate of 175Kg/100 sq.mt. and compaction with power roller Excluding prime/tack coat Using V30 grade Bulk(Item to be used for V.R and O.D.R. road works only as per Sp-20 with prior permission of Superintending Engineer) Spec : As per MORTH specification Fifth Edition Clause No.507 and IRC-SP-97-2013

Providing and laying bituminous bound macadam surface 50 milimetre thick including supplying all materials spreading trap metal layers and key aggregate heating and spraying bitumen at the rate of 175 Kg/100 sq.mt. and compaction with power roller etc. complete (without seal coat).excluding 20 mm metal 1) Using Bulk Bitumen grade 60/70 on WBM with tack coat excluding royalty charges (by Blasting) Spec : As directed by Engineer in charge

Bituminous macadam: Proving and laying bituminous macadam using crushed aggregates of specified grading premixed with bituminous binder, transported to site with VTS , laid over a previously prepared surface, finished to the required grade, level, alignment, and rolling to achieve the desired compaction for 50/75 mm compacted thickness with 3.4 % VG-30 Bitumen. -- USING 80 TPH Batch mix type hot mix plant with SCADA, Sensor Paver, Intelligent Compactor with compaction analyzer and V-Sat attachment. Spec : Spec. No.: As per MORTH specification Fifth Edition Clause No.504 and IRC-SP-97-2013 216/60 b / 23 MORTH

Open Graded Premix Surfacing- Providing and Laying OGC 20 mm thickness composed of 13.2 mm to 5.6 mm aggregates premixed with bituminous binder transported to site with VTS , laid over a previously prepared surface, finished to the required grade, level, alignment, and rolling to achieve the desired compaction VG-30 Bitumen, including providing and laying seal coat sealing voids in a bituminious surface laid to the specified level and cross fall using Type‖A‖seal coat but excluding prime / tack coat. For Bitumen VG-30 bulk--USING drum mix type hot mix plant with SCADA Paver and Vibratory roller Spec : As per MORTH specification Fifth Edition Clause No.510 212/53 a / 23

Providing and Laying R.C.C. Pipe N.P. 3 Diameter

300mm Dia.

450mm Dia.

600mm Dia.

M/S Vithai Construction Pandharpur