REPAIRS TO PATH, DRAIN HARDSTANDING AND FENCING AT ZONE B AT ZAKHAMA MIL STN UNDER AGE (I) ZAKHAMA

Amount

Demolition of brick or stone masonry work built in cement mortar including all quoins, arches, pillars etc complete all as specified and as directed.

M&L for PCC 1:4:8, type D2 (using 40mm graded stone aggregate) as in foundation, filling and mass concrete etc. complete all as specified and as directed.

M&L for walling of random rubble, uncoursed, well bonded, bedded and solidly hearted, built in CM 1:6 complete all as specified and as directed.

All as per item here-in-before but using except stone obtain from item No 3 complete all as specified and as directed.

M&L for Pre-Cast Plain Cement Concrete (1:3:6) type C1 using 20mm graded stone aggregate as in bond stone set in Cement Mortar 1:4 complete all as specified and as directed.

M&L For extra over stone walling for hammer dressing to face stones and dressing of face beds and joints, as specified, of random rubble walling, using 20mm thick Granite or Trap stonee complete all as specified and as directed.

M&L for raised pointing to random or ploygonal rubble, uncoursed or brought upto courses in cement mortar 1:4 complete all as specified and as directed.

S&F for (SWR) pipes,75mm bore single socket in any length with rubber ring joint, weep hole etc complete all as specified and as directed.

M&L for hand packing any thickness of broken stone or boulder at back of wall pitching, laid dry, hand packed tightly complete all as specified and as directed.

M&L for brick work with sub class ‘B’ bricks (locally available best quality) straight or curved on plan exceeding 6m mean radius, built in cement mortar 1:6 complete all as specified and as directed.

M&L for brick work with subclass ‘B’ bricks, (locally available best quality) straight or curved on plan to any radius in half brick thick wall, built in cement mortar (1:4) complete all as specified and directed.

Demolition of cement concrete (unreinforced) in ground floor and paving not exceeding 15 cm thick ( Below or above ground) complete all as specified and directed.

Demolition of plain cement concrete of any description and in any position not otherwise specifically provided complete all as directed.

M & L for 75 mm thick PCC sub base in (1:4:8) type D2 (using 40mm graded stone aggregate) complete all as specified and as directed.

M & L for 100 mm thick PCC as in path, paving, hardstanding, floor in (1:2:4) type D2 (using 40mm graded stone aggregate) and finished the surfaces even and smooth without using extra cement complete all as specified and as directed.

M & L for PCC as in coping, benching, cills, hold fasts, fixing of post, water trough etc in (1:2:4) type B1 (using 20mm graded stone aggregate) including necessary formwork complete all as specified and as directed.

M&L for 15mm thick rendering in cement mortar (1:4), in two layers, under coat of 10 mm thick & top of 5 mm thick, to other than fair faces of brick or concrete wall surfaces, top layer 5 mm thick , finished even and smooth without using extra cement complete all as specified and as directed.

M&L for pre polished chequered cement concrete tiles in floor, area exc 0.06 Sqm but not exc 0.11 Sqm, 25 mm thick with white cement and pigments of approved make jointed with cement slurry and pointed with white cement mixed with colour pigment to match with the tiles over and including screed bed of 20 mm thick cement mortar (1:4) complete all as specified and as directed.

M & L for Dora stone tiles 300mmX300mmX10mm to 15mm thick, laid in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tile over screed bed of 20 mm thick in cement mortar (1:6) complete all as specified and as directed.

M & L for preparation of newly plastered surface of walls and applying three coats of white wash complete all as specified and as directed

S & F 60 mm thick machine pressed precast concrete interlocking paver block of any shape and size confirming to IS 15658-2006 M-35 Grade over and including 30 mm thick sand bed including dismantling of old paver block complete all as specified and as directed.

Dismantling fencing wire mesh of any type complete all as specified and as directed.

Dismantling posts or struts embedded in concrete (wood, steel or R.C.C.) any section, including taking out embedded portion Concrete, brick work masonry, etc.and making good disturbed ground complete all as specified and as directed.

M&L for PCC 1:3:6, type C2 (using 40mm graded stone aggregate) as in foundation, filling and mass concrete etc. complete all as specified and as directed.

S&F mild steel angle iron post & strut etc. in fencing including embedding in concrete and screwing etc. including securing bolts; posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe-290 GdeE-165 completed all as specified and as directed.

Supply only chain link fencing wire mesh of any size or type, made with 4 mm dia mild steel galvanised wire complete all as specified and as directed. Note:- Unit weight of chain link fencing shall be ascertained through BOO as ordered by AGE (I). The same shall be submit before payment of RAR.

Fixing only chain link fencing including line wires, any mesh, size and type to any type of standards, rails, straining bolt etc including provision of binding wire complete all as specified and as directed.

S & F Mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, n exc 5cm long and diameter of shank 5 to 10mm completed all as specified and as directed.

S&F Mild steel round or square bars 10mm dia and over for straining in available length, cut to length, bent to shape required Fe-410W (Gde E-250) quality 'A' complete all as specified and as directed.

S & F galvanized two strand, steel barbed wire 2.24 mm dia barbed with 2 mm dia bars at 75 mm spacing and straining and fixing to RCC / steel post etc., including securing or tying at crossing with and providing of galvanized mild steel wire, staples or steel pins, etc., (each line of wire to be measured separately) including dismantling of old barbed wire of any description complete all as specified and as directed.

M&L for preparation of new steel or iron surfaces of any description over 10cm width or girth and applying two coats of synthetic enamel paints over a coat of red oxide, zinc chrome primer complete all as specified and as directed.

M&L for preparation of new steel or iron surfaces of any description n exc 10cm width or girth and applying two coats of synthetic enamel paints over a coat of red oxide, zinc chrome primer complete all as specified and as directed.

thepfuralie zutso (BID ID -3112075)

J C DUTTA (BID ID -3113181)