REPAIRS TO DRAIN BOUNDARY WALL FENCING AND HARDSTANDING IN ZONE C AREA UNDER AGE B R N NO I OF GE NORTH SECUNDERABAD

Amount

Dismantling posts or struts ( wood, steel, or RCC ) any section, including taking out embedded portion and making good disturbed ground for posts embedded in natural ground complete all as specified and directed.

Dismantling posts or struts ( wood, steel, or RCC ) any section, including taking out embedded portion and making good disturbed ground for posts embedded in concrete, brick work, masonry etc.,complete all as specified and directed.

Excavation in post holes (or similar holes) in hard / dense soil each n. exc 0.5 cu.m, getting out, returning filling in and well ramming earth or broken rubble mixed with earth around, in layers n.exc 25 cm, watering and removing surplus soil to a distance n exc 50 m and making good surfacel complete all as specified and directed.

S&F Rolled mild steel in joist, channel, angle or tee sections, fixed independently , without connection plate etc cut to ordinary length within 20mm of the length conforming to Fe 410-W (Gde E-250 quality-B) complete all as specified and as directed

S & F Mild steel TMT bars 10 mm dia over, cut to length, bent to shape required including crancking bending spirally for hooping for col hooking ends and binding with and including mile steel wire non less than 0.9 mm dia securing with clips in quality complete all as specifed and directed.

All as per item No 05 here in before but 6mm to 8mm dia complete all as specifed and directed.

M&L Providing precast RCC (1:2:4) type B-1 (using 20 mm graded stone aggregate) as in fencing post and similar work complete all as specified and directed.

M&L PCC (1:4:8) type D2 (using 40mm graded stone aggregate) as in foundatons, filling and mass concrete complete all as specified and as directed.

Dismantling of wrought iron or mild steel work of any description not otherwise provided for complete all as specified and as directed

S&F Framed work such as gates,grills, gratings,hook and Pintle higes for large steel gates ,railing etc including round headed screws or welding seams including bending or turning up mitred angles etc as required etc, with ends of bars shouldered and/or riveted, or forged into spiles; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; gates, railings,rollers etc and similar work conforming to Fe 290 or Gde-E165 and complete all as specifed and directed.

S&F 1.00mm thick mild steel, plain,black sheet in wall cladding, steel gates and similar work cut size, holes punched, including round headed screws or welding seams including bending or turning up mitred angles etc complete all as specified and directed.

S&F for Decorative Knobs for fixing of gates any size , etc complete all as specified and directed.

M&L Preparing the new steel or iron surfaces of any description over 10 centimetre width or girth and applying two coats of synthetic enamel paint over a coat of red oxide, zinc chrome primer complete all as specified and as directed

Dismantling of fencing wire mesh of any type complete all as specified and as directed

Supply only mild steel galvanised chain link fencing of any size or type complete all as specified and as directed

Fixing for chain link fencing including line wires, any mesh, size, rails, straining bolts, etc. including provision of binding wire. (Chain link fencing and line wire shall be paid at supplied only rate) complete all as specifed and directed.

S&F Mild steel screw bolts (Machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, exceeding 5 cm long but not exceeding 10 cm long , 5 to 10mm dia of neck complete all as specifed and directed.

S&F in repairs Galvanised, 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails straining bolts, including, securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc. complete all as specifed and directed. (each line wire to be measured)

Demolition of concrete in ground floors (un reinforced) and paving n.exc. 15 cm thickness (below or above ground level) and including removal of rubbish/ demolished materials out side of MD land complete all as specified and directed.

Demolition of PCC (un reinforced) of any description and in any position not otherwise specifically provided for and removal of rubbish/ demolished materials out side of MD land complete all as specified and directed.

Demolition of brickwork or stone/boulder masonry / Block masonry, built in cement mortar including facing, dressed stone work and precast concrete all quoins, arches, pillars, coping etc but excluding ashlars articles and removal of rubbish/ demolished materials out side of MD land complete all as specified and directed.

M&L Walling of squared rubble masonry regular coursed, Secunderabad and Bangalore types, well bonded, bedded and solidly hearted, built in CM ( 1:6) complete all as specified and as directed

All as per item No 22 above but except stones complete all as specified and directed. Note- Serviceable stones obtained vide item No 21 above shall be reused after removing mortar and cleaning with water complete all as specifed and directed. .

M&L Brick work with fly ash bricks old size, straight or curved on plan exceeding 6.0 metre mean radius built in CM (1:6) complete all as specified and as directed.

M & L Precast cement concrete block masonry with solid blocks exceeding 10cm in width by using PCC (1:3:6) type C1 (using 20 mm graded stone aggregate) and set in CM (1:6) complete all as specified and and directed

M & L Providing PCC (1:2:4) type B1 (using 20mm graded stone aggregate) as in copings, kneelers, apex stones, bed plates, kerbs, water troughs and the like including weathering, slightly rounded for chamfered angles and throating, including necessary form work complete all as specified and as directed.

Taking down cement or cement lime mortar plaster, any description on brick or stone walls etc, including rackingout joints, hacking for key, scrubbing down with water etc complete all as specifed and directed.

M&L Rendering 15 mm thick in CM (1:6) on fair faces of brick work or concrete surfaces, finished even and smooth without using extra cement complete all as specifed and directed.

M & L Rendering 15mm thick CM (1: 4) on fair faces of brick work or concrete surfaces, finished even and smooth without using extra cement complete all as specifed and directed.

M&L Rendering 10 mm thick in CM (1:6) on fair faces of brick work or concrete surfaces, finished even and smooth without using extra cement complete all as specifed and directed.

M&L Raised pointing to random or polygonal rubble uncoursed or brought upto courses in CM (1:4) complete all as specified and as directed

M&L Providing 25 mm thick Precast cement concrete (1:2:4) type B0 (using 12.5 mm graded stone aggregate) as in louvers and jallies of size 60 x 60 or 60 x 90 cm (measured solid) including all mouldings and set in CM (1:4) and complete all as specified and as directed.

M&L PCC (1:2:4) type B-1, ( using 20mm graded stone aggregate ) as in surface channels and drains etc complete all as specified and as directed.

M&L Extra for forming fair finished drain or channel 25 centimetre inner girth in cement concrete, using extra cement, including forms, moulds, mitred / stop ends etc. complete all as specified and as directed

M&L Preparing the new plastered wall surfaces and applying three coats of white wash to match with the existing surface complete all as specified and as directed

S&F in repairs 2mm thick plain colour PVC sheet fixed in MS angle frame work or laid on to Mild Steel door and gate with coach screw including all assessaries complete all as specified and as directed.

M&L 75 mm thick PCC (1:4:8),type D2 (using 40 mm graded stone aggregates) as in subbase to floor complete all as specified and as directed.

M&L for Machine pressed precast concrete interlocking paver block with grey cement and pigment (glossy finish) any shape & size conforming to IS 15658-2006 of 60 mm thickness, M-35 grade etc complete all as specified and as directed.

M&L Spreading and levelling of Sand/ grit cushioning below interlocking tiles complete all as specified and as directed.

M&L Designer rubber moulded chequerred cement concrete tiles of size 300 x 300 x 22mm or 250 x 250 x 22mm thick with mixture of grey and white cemetn in equal porportions with pigments and set and pointed in neat cement slurry in floors over a screed bed or bedding layier in 15mm thick CM (1:6) for laying floor finishes etc complete all as specified and as directed.

M&L Pre cast Machine pressed cement concrete 1:2:4 type B-0 (using 12.50mm graded stone aggregate) as in kerbs stones and fixing all as per manufacturer instructions complete all as specified and as directed. Note: The size shall be decided and directed by Eng-in-charge.

M/S C MALLIAH & SONS (BID ID -3129020)

M/S RADHIKA ENTERPRISES (BID ID -3119854)

ATUL ENTERPRISES (BID ID -3125931)

SN POWER TECH (BID ID -3120004)

R G NAIDU CIVIL CONTRACTOR AND BUILDERS (BID ID -3119925)

SAI RAM CONSTRUCTIONS (BID ID -3126699)

SAI RUPA CONSTRUCTIONS (BID ID -3122431)

S.R.M.K Enterprises (BID ID -3129562)