CONSTRUCTION WORK OF SCRAP YARD AT NAGPUR LPG PLANT

Subject: Tender for Construction of Scrap Yard at Nagpur LPG Plant

S.No. | Service No. | Description | Unit | Quantity | Rate | Amount

10 | 9018745 | Earth work with excavation in area size 16m x 31m x 0.152m for scrap yard and 45m x 2m x 0.076m for approach pathway to scrapyard up to 1.5 m of soft rock and back filling inside below existing ground level upto required depth including removal of vegetation,shrubs and debris cutting and dressing the sides in slopes and bottom, levelling, grading and ramming of bottoms, bailing out of water, shoring, strutting, backfilling etc. compacting by the side of the foundation as directed by the Engineer in Charge including spreading, watering and compaction using suitable compactors. | M3 |

20 | 9018768 | Supply & Laying of pebbles in area size 15m x 30m x 0.076m for scrap yard and 45m x 2m x 0.076m for approach pathway of size 30 mm to 40 mm size in the designated area including transportation from source location to point of laying, screening, washing, etc.all complete. | M3 |

30 | 9018757 | Supplying and Filling murrum in area size 15m x 30m x 0.076m obtained from approved quarries free from all organic vegetation and foreign matter including all royalities, taxes, handling and transportation to site, spreading in layers not exceeding 150 mm thick inside BPCL premises, watering,compacting by suitable compactors. The density to be achieved shall not be less than 90% of the density obtained in the laboratory (modified proctor method) . Murrum having standard proctor laboratory maximum dry density of less than 1.8 gms/cc shall not be used. The murrum shall have a Plasticity Index of 7-17(medium Plastic) and not more than 20% Fines,i.e., Clay. Particle size grading shall be 20mm and down size. | M3 |

40 | 9018871 | Preparing the sub grade of area size 15m x 30m by dry rolling, using 8-10T power roller, wateringusing sprinklers, compacting using 8-10 Tpower roller, to achieve 90 %laboratory maximum dry density as per IS 2720, dressing, trimming to specified profile grade line level etc. complete. | M2 |

50 | 9018793 | Supplying and laying in postion RCC of 1:1.5:3 CS using 20mm anddown size graded crushed stone aggregate in sub structure for area size 15m x 30m x 0.125m for scrap yard and 2m x 2m x 0.5 m for culvert over drain for approach pathway including placing of concrete,supplying pockets,openings, recesses,chamfering wherever required etc., vibrating, tamping, curing and rendering if reqd. to give a smooth and even surface etc. all complete(excluding the cost of reinforcement, but including the cost of centringand shuttering)for all depths below and upto plinth level in any shape,position, thickness etc. all complete as specified and directed. Only steel shuttering will be used so as to obtain required finish. The height of shuttering shall not exceed 1.5 m per lift of concrete.: 1:1.5:3 (1 cement: 1.5 coarse sand: 3 grade stone aggregate 20 mm nominal size) | M3 |

60 | 9018813 | Supplying and placing HYSD steel reinforcement of Grade 500 (TMT) conforming to IS 1786 in position for RCC worksincluding straightening, cutting, bending, placing in position andbinding with 16 SWG black soft annealed binding wire at every intersection, supplying and placing appropriate cover block all complete including cleaning and making it free from oil, grease etc. complete-for all heights and depths and conforming to relevant IS code (Make: SAIL,TATA, JSW, ESSAR, VIZAG STEEL or approved equivalent make conforming to IS code) | KG |

70 | 9018921 | CHAIN LINK FENCING 1.35m Ht. Supplying and erecting chainlink fencing 1.35m high on the angle iron posts at approximately 2.5m centre to centre embedded in CC 1:3:6 incl. painting vertical post with 2coats each of Red oxide and aluminiumpaint. | M |

80 | 9018713 | Supplying and welding/fixing Side hung Double leaf MS gate of size 2 m width consisting of made of structural members such as channels, angles, flats, box sections,tubes, meshes, rounds, sheets etc.including supplying sliding plates with lugs and hinges/pins with locking arrangements including jamming, lugs and pintles in 1:1.5:3 concrete, including one shop coat of zinc chromate primer complete with all associated works at all heights and levels as per drawings, specifications and instructions of the Engineer Incharge. | KG |

90 | 9018896 | Supplying & laying CC paver blocks 60mm thick using minimum M 35 grade laid on 50mm avg thickness of coarse sand bedding for approach pathway of size 45m x 2m to scrapyard . This also includes filling of interstaces with river sand | M2 |