SPECIAL REPAIR TO BLDG NO P 20 (HKC) (TRAINEE OFFR ACCN) AT CMM UNDER AGE BR I OF GE (EAST) JABALPUR

Amount

Demolition of cement concrete (unreinforced) of any description and in any position not otherwise specifically provided for and the like removing rubbish site and depositing where directed at a distance n.exc 100 m complete all as specified and directed.

Removal of existing detoriated decayed tarfelt or any treatment of any thickness including loose surface craping with scraper chiseling scarping of surface with wire brush or any other method and removing the scrapped materials debris to a distance n.exc 50m depositing where directed complete all as specified and directed.

M&L cutting out cracks to V section in existing roofs/wall or terracing, cleaning out, wetting, grouting with cement and sand slurry 1:3 complete all as specified and directed.

Taking down cement plaster on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water etc complete all as specified and directed.

Demolition of brick masonry built in cement mortar all as specified.

M&L for Brick work with fly ash bricks, straight or curved on plan exc 6 m mean radius built in CM 1:6 complete all as specified and directed.

M&L plastering in CM (1:6) 15 mm thick on brick masonary walls and finished surface even and smooth without using extra cement complete all as specified and directed.

M&L 15mm thick rendering on fair faces of brick work or concrete surface in cm 1:4 mixed with WPC as per manufacturer’s instructions, but not less than 3% by weight of cement finished even and smooth without using extra cement complete all as specified and directed. Note : WPC shall be measured and paid separately.

M&L plastering in CM (1:3) 5mm thick on ceilings of concrete surface finished even and smooth without using extra cement complete all as specified and directed.

Supply only integral water proofing (ISI mark) compound all as specified and directed.

Dismantling of floor, heath or wall tiling including cement mortar bedding (but not backing) removing serviceable tiles to store and rubbish off the premises complete all as specified and directed.

S&F light shade Vetrified Ceramic tiles 9-10mm thick (square/rectangular) polished, area of each tiles n.exc 0.36sqm, in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15mm thick screed bed in CM 1:6 complete all as specified and directed.

All as per item srl No 12 here-in-before but in skirting over and including 10mm thick screed in CM 1:4 complete all as specified and directed.

M&L non skid ceramic coloured & designer tiles 7 to 8 mm thick (square rectangular ) area of each tile exc 0.11 sqm but n.exc 0.18 sqm, in floors/skirting laid over & including 15 mm thick screed bed in CM 1:6 set and jointed in neat cement slurry and pointed in white cement to match complete all as specified and directed.

M&L glazed colored ceramic coloured & digital tiles 450 x 350/7 mm thick on vertical surfaces of wall set and jointed in neat cement slurry and pointed in white/coloured cement to match shade of tiles over and including 10mm thick rendering in CM 1:4 complete all as specifed and directed.

M&L Machine cut kota stone slab flooring 20-25 mm thick over 15 mm cement screed base or bedding layer in cement mortar 1: 6 laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and directed.

M&L Kota stone slab 20-25mm thick in riser of steps, skirting, dado and pillar laid over and including 10mm thick rendering in CM 1:4 complete all as specifed and directed.

M&L plain cement concrete (1:2:4) type B-O, (12.5mm graded crushed stone aggregate) as in filling under undulation of roof top/chajjas complete all as specified and directed.

M&L 75 mm thick PCC type C-2 (1:3:6) using 40 mm graded crushed stone aggregate as in plinth protection/ floor laid in panels including joints (30mm deep x 10mm wide) filled with sealing compound Gde 'A' finished even and fair complete all as specified and directed.

Supplying and providing water proofing treatment over cleaned roof/chajja/vertical surface with 3mm thick polymeric standard water proofing APP membrane wt not less than 3 kg/m2 comprising of the following for Non approachable roof including cleaning, sweeping and washing with water to remove all dust etc from the plastered roof surfece or walls applying a coat of hot air blown bitumen of grade 85/25 conforming to IS 702 @ 1.20 kg/m2 over a coat of bitumen primer @ 0.3 kg /m2 on prepared surface weight of APP membrane not less than 3 kg/m2 with 100 mm over laps with sides and end . the over lap shall be sealed flame including with vertical surface after cutting necessary grooves and making good with PCC gala 1:2:4 type B1 etc adhere to hot blown bitumen all as per manufacturere instruction including two coats of aluminium paint complete all as specified and directed.

Dismantling water tanks and removing to store exc 500 and n.exc 1000 ltrs capacity complete all as specified and directed.

S&F 1000 ltrs capacity rotational moulded polyethene water storage tank thee layered cylinderical vertical with closed top hoisted and fixed in position complete all as specified and directed.

Taking up or down 15mm bore steel water tubing and fitting from any position including cleaning for refixing or removal of the same from site complete all as specified and directed.

S&F 15mm bore steel tubes ISI marked galvanized medium grade with all fitting fixed to wall ceiling or laid in floors complete all as specified and directed.

Refixing 15mm bore old steel tubing and connecting in new or old position as directed in walls ceiling or floor etc complete all as specified and directed.

Taking up or down 20 mm bore steel tubing and fitting in any position including cleaning for refixing complete all as specified and directed.

S&F 20mm bore steel tubes ISI marked galvanized medium grade with all fitting fixed to walls ceiling or laid in floors complete all as specified and directed.

Refixing 20mm bore old steel tubing and connecting in new or old position as directed in walls ceiling or floor etc complete all as specified and directed.

S&F 15 mm bore concealed brass CP stop cock screwed both ends for iron pipe or for union fixed in repair complete all as specified and directed.

S&F 15 mm dia stop valves cast copper alloy screwed down high pressure with cruch or butter fly handle screwed both ends for iron pipe or for unions fixed in repairs complete all as specified and directed.

S&F 15mm dia angle valves cast copper alloy screwed down high pressure with cruch or butter fly handle screwed both ends for iron pipe or for unions fixed in repairs complete all as specified and directed.

S&F in repairs 20mm dia D type 60cm long brass CP tubuler towel rail complete all as specified and directed.

S&F in repairs bib taps cast copper CP long body fancy type alloy with crutch butterfly handle screwed down, screwed for iron pipe or for brass ferrule for 15 mm dia pipe complete all as specified and directed.

S&F in repair vitreous china wash down water closet pan (padastal pattern) Coloured including Jet system & matching coloured seat covered fixed complete all as specified and directed.

S&F PVC low level flushing cistern 10 ltrs capacity white with inlet, ball valve floor with flush pipe complete including brackets. (Make : Kajaria/Cera/Parryware) fixed in repair.

S&F in repair 15mm bore brass CP wash basin mixture for mixing hot and cold water complete all as specified fixed as in repair.

S&F in repair 15 mm dia brass CP wall mixer unit for mixing hot & cold water screwed down for iron pipe and fixed as in repairs.

S&F 15 mm bore PVC connection with PTMT nuts of length 600 mm.

S&F 20 mm bore ball valve high presure with polythene float and fly nut epoxy coated aluminium rod complete, screwed for iron pipe or brass ferrule and fixed fixed in repairs complete all as specified and directed.

M&L CP shower rose with swivel joints 125mm dia fixed in repair complete all as specified and directed.

S&F in repairs vitreous China Wash hand basin, white, flat back, size 550 mm x 400 mm size excluding taps, chain & plug & porcelain stopper incl brackets, 40 mm dia PVC waste pipe, chromium plate coupling 32 mm dia & cutting for and pinning ends of brackets or erecting stand complete all as specified and directed.

S&F PVC bathroom cabinet of size 622 x 422mm complete of make : Prayag.

Taking down rain water AC pipes and waste pipes including all fittings internal dia of pipe100 mm complete all as specified and directed.

S&F PVC (SWR) pipe 110mm bore single socket in any length with rubber ring joints, fixed to walls, complete all as specified and directed.

S&F PVC (SWR) pipe 75 mm bore single socket in any length with rubber ring joints, fixed to walls, complete all as specified and directed.

S&F 110mm dia PVC bend with access door complete all as specified and directed .

S&F 75 mm dia PVC bend with access door complete all as specified and directed .

S&F 110mm bore PVC junction single 'T' equal with provided access door complete al as specified and directed.

S&F PVC 75mm dia (SWR) branch piece single (Single Y) equal or unequal complete all as specified and directed.

S&F PVC 110mm dia (SWR) branch piece single (Single Y) equal or unequal complete all as specified and directed.

S&F PVC (SWR) vent cowl 110mm dia complete all as specified and directed.

S&F in repair Harrisom rails MS chromium plated curtain rod with fixing bracket, stops, rollers etc fixed as in repairs complete all as specified and directed.

Taking down chowkhats or frames with shutters (without taking of shutters from the frame) area n.exc 1.5 Sqm each including removing to store complete all as specified and directed.

Taking down chowkhats or frames with shutters (without taking of shutters from the frame) area exc 1.50 sqm but not exc. 4.00 sqm each including removing to store complete all as specified and directed.

S&F 4mm thick tinted glass sheet ordinary quality and glazing with oil putty in square n.exc 0.50 Sqm each pane complete all as specified and directed.

All as per item srl No 56 here-in-before but frosted glass pane one side complete all as specified and directed.

S&F Pressed steel frames for doors of size 105 x 60 mm with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc complete all as specified and directed.

S&F Pressed steel frames for doors of size 125 x 60mm with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc complete all as specified and directed.

M&L for cement concrete 1:3:6 type C-0 using 12.5 mm graded crushed stone aggregate as in back filling etc and similar work including necessary form work complete all as specified and directed.

S&F Mild steel works as in hold fasts, clamps, plain angle cleats for securing purlins to wood trusses or rafters, cooler stands and similar small articles conforming to Fe 410-0 or Fe 310-0 complete all as specified and directed.

Material and labour surfaces of any description, not described otherwise over 10 cm in width or girth and applying two coats of synthetic enamel paint over a coat of pink primer on wooden surface new or previously untreated surfaces complete all as specified and directed.

S&F 35mm Flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides factory made complete all as specified and directed.

S&F Powder coated aluminium (minimum thickness of powder coating 50 micron) for shutters of doors, windows & ventilators including providing and fixing hinges/pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber/ neoprene gasket required (fittings shall be paid for separately) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws complete all as per architectural drawings and the directions of Engr-in-Charge.

S&F Anodised aluminium powder coated ( minimum 50 micron thickness) frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc complete all as per specified and directed.

S&F anodised aluminium grill (anodised transparent or dyed to required shade according to IS: 1868 with minimum anodic coating of grade AC 15) of approved design/pattern, with approved standard section and fixed to the existing window frame with C.P. brass/ stainless steel screws @ 200 mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening, complete all as per requirement and direction of Engineer-in-Charge.

S&F sliding interlock for window in each shutter (45.5 mm x 28 mm) complete all as specified and directed.

S&F mild steel frame work such as grills, guard bar with ends of bars shouldered and or revited and similar work confirming to Fe-410 -O or Fe-310-O complete all as specified and directed.

S&F factory made shutters 35mm thick of 2nd class HW glazed and skeleton shutters open rebated divided into squares to receive glass (or) guage and shall be pneumatic chemically pressure treated etc complete all as specified and directed.

Dismantling wall and ceiling boards (fibre, pulp, insulation, etc) or insulation boards/slabs/ blankets, any thickness, including cover fillets if any complete all as specified and directed.

S&F Solid PVC wall Lining one side prelam consisting of 5mm thick coloured PVC sheet inclusive of solvent cement and preparing existing surface and fixing at site on as cupboard etc as specified and directed. Make : Rajshree/Sintex.

S&F 18mm thick prelaminated coloured solid PVC sheet suitably fixed in MS angle frame work as per specification and drawings (MS frame shall be measured seperately). Make : Rajshree/Sintex

S&F12mm thick prelaminated coloured solid PVC sheet suitably fixed as per specification and drawings (MS Frame shall be measured seperately). Make : Rajshree/Sintex

S&F Solid designer PVC Door frame of size 50mm x 47mm made out of 5 mm plain colour PVC sheet reinforcement with MS square tube,supplying & fixing in opening as per specification & drawing complete all as specified and directed.

S&F factory made solid panel designer PVC door shutter 30mm thick (style) consisting of frame made out of M.S tubes for top & bottom rails, M.S frame shall be covered with heat moulded plain colour PVC `C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on eighter side & as gap insert for top rail & bottom rail, panelling of plain colour PVC sheet to be fitted in the M.S frame welded/sealed to the stiles and rails with suitable PVC sheet beading and jointed to gether, with solvent cement supplying & fixing in the frame at site as per specification & drawing complete all as specified and directed.

S&F stainless steel wire cloth. 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and directed.

S&F 300mm MS ordinary rat tail rod pattern springs, including roller and roller plate complete all as specified and directed.

S&F 125mm long hasp and staple mild steel safety type stove enamelled black inclding bolt to hinge plate and fiexed with screws as in repair complete all as specified and directed.

S&F 300mm long MS sliding door bolts plate type, stove enamelled black with bright bolt not less than 12mm dia, with and two on staple plate and fixed complete all as specified and directed.

S&F mild steel 150 mm pressed handles, oval type, stove enamelled black complete all as directed.

S&F mild steel barrel tower bolts, stove enamelled black with bright bolt of size 200 mm long, ISI marked complete all as directed.

S&F aluminium anodised, barrel tower bolts of extruded section and fixed 150 mm length of bolt .

S&F Aluminium handles cast type anodised 150 mm size.

Supply and fix 100 mm size, butt hinges, extruded aluminum alloy with galvanised mild steel hinge pin, anodized and fixed type C-21 complete all as directed.

Demolition/dismantling of reinforced concrete such as beams, stair case, landing, chajjas, facia and similar suspended work (reinforcement cut as required to facilitate demolition) complete all as specified and directed.

M&L for reinforced cement concrete 1:2:4 type B-1 (using 20 mm graded crushed stone aggregate) (Nominal mix), in chajjas, fascias, fins including necessary form work etc complete all as specified and directed.

M&L for reinforced cement concrete 1:2:4 type B-1 (using 20 mm graded crushed stone aggregate) Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and directed.

M&L for formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work n.exc 200m thick (Horizontal or sloping) complete all as specified and directed.

M&L for TMT bars 10mm dia & over, cut to length, bent to shape reqd including cranking, bending specially for columns, hooking ends & binding with MS wire annealed not less than 0.9mm dia welding as required at site completeall as specified and directed.

All as per item srl No 89 here-in-before but bars 5mm dia and over upto 10mm dia as in stirrups, spacers completeall as specified and directed.

M&L 25 mm thick PCC (1:2:4) type B-1 using 20mm graded crushed stone aggregates complete all as specified and directed.

M&L two coats of synthetic enamel painting over one coat of red oxide on steel and iron surfaces including necessary preparation of surfaces complete all as specified and directed.

M&L for two coats of acrylic distemper/distemper oil emulsion (OBD) on wall of any description including preparation of new/existing plastered surfaces over and including 2mm thick birla wall care putty complete all as specified and directed.

M&L for preparation of new surface and applying two coats of white wash on ceiling complete all as specified and directed.

M&L for preparation of new surface applying two coats of exterior acrylic emulsion base premium quality weather coat exterior anti fungal paint over a coat of alkali primer after oil putty treatment on plastered surfaces complete all as specified and directed.

Taking down carefully copper/aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendents, bell, bell push, regulators, sockets etc removing materials and making good disturbed surfaces of walls, floors, etc complete all as specified and directed.

Taking down unservicable/partly unservicable street light/light fittings any type, tube light fitting and fixtures, etc, and making good to the disturbed surfaces of walls/floor etc to macth with existing surfaces including white washing/colour washing/distempering to match with existing wall/floor/ceiling finishes complete all as specified and directed.

Dismantling unserviceable main switch/ kitkat DBs/ MCB including wooden board from existing position and making good disturbed surfaces of wall to match with existing surfaces complete all as specified and directed.

Taking down sub main wiring of any size/capacity complete all as specified and making good disturbed sufaces to match with the existing surfaces complete all as specified and directed.

M&L for point wiring with PVC insulated unsheathed stranded copper conductor cable of size 1.5 Sqmm, with PVC insulated unsheathed stranded copper conductor cable of size 1.5 Sqmm stranded for earth continuity wire, to be drawn in and including, PVC medium grade conduit not less than 20 mm dia with MS sheet metal sunken switch/Terminal box 1.2 mm thick and ebonite switch board cover 3.0 mm thick or PVC moulded switch board and brass screws with cup washers including all necessary wall cutting and making good disturbed surface complete all as specified and directed. Note : (i) Making good to match with the adjoining surface is deemed included in the unit rate. (ii) Rate is inclusive of cutting/chases of wall/floor/ceiling.

One light point controlled by one, one way switch complete all as specified and directed.

One ceiling/exhaust fan point controlled by one switch and regulator complete all as specified and directed.

One 3 pin 5 amp socket out point on the same board with other switches.

One 3 pin 5 amps socket out let point on independent board complete all as specified and directed.

One bell/buzzer point controlled by one bell push complete all as specified and directed.

All as per item srl No 100 above but using 2.5 sqmm cable for one 15A socket outlet completeall as specified and directed.

S&F switch piano flush type single pole one way 6 Amps complete all as specified and directed.

S&F socket out let 2 in one, 5/3 pin, 6 Amp complete all as specified and directed.

S&F switch socket combination 6 Amps, 3 pin flush type complete all as specified and directed.

S&F switch socket combination 3 pin,16 Amps flush type universal complete all as specified and directed.

S&F ceiling rose, surface bakelite 65 x 50 mm three terminal complete all as specified and directed.

S&F call bell AC-230 Volt single pole ding dong complete all as specified and directed.

S&F bell push, flush type 5 Amps complete all as specified and directed.

S&F electronic regulator 100/120 Watt step type complete all as specified and directed.

S&F lamp holder insulated body with back plate for angle holder complete all as speicifed.

S&F LED bulb 9/10 Watt, base cap B22, 6500 K colour Temp suitable for fixing on lamp holder complete all as specified and directed.

S&F LED tube light fitting 9/10 Watt decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and directed.

S&F LED tube light fittings 18/20 Watt decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and directed.

S&F earth enclosure with 2 pin earth plug sokcet complete with MCB SP, flush mounting type completeall as specified and directed.

Taking down ceiling fan/exhaust fan of any size or make and refixing including cleaning and oiling/greasing complete all as specified and directed.

M&L for sub main wiring power/circuit using PVC insulated unsheathed, stranded copper conductor cable 2 Single core of size 4 Sqmm, earth continuity conductor of size 4 Sqmm to be drawn through and including PVC conduit 25 mm dia medium grade conceled in walls/roof/floors complete all as specified and directed. Note :- Two run of conductor cable, one run of earth continuity wire and one run of conduit shall be measured as one unit.

M&L for sub main wiring power/circuit using PVC insulated unsheathed, stranded copper conductor cable 2 Single core of size 2.5 Sqmm, earth continuity conductor of size 2.5 Sqmm to be drawn through and including PVC conduit 25 mm dia medium grade conceled in walls/roof/floors complete all as specified and directed. Note :- Two run of conductor cable, one run of earth continuity wire and one run of conduit shall be measured as one unit.

S&F MCCB DB vertical type made of sheet steel, powder painted with Neutral bus bar 200 Amps, neutral link, IP-43-IK09 protection grade, 415 Volts TPN with 4 way Double door complete all as specified and directed.

S&F MCB DB made of sheet steel, powder painted with Neutral bus bar 200 A, neutral link, earth bar and Din rail, 240 Volts SPN with 8 way Single door, IP-43-IK09 protection grade complete all as specified and directed.

S&F MCB/Isolator SPN 240 Volts, 'C' series, breaking capacity 10 KA of rating 40 Amps complete all as specified and directed.

S&F MCB/Isolator SP 40 Amps, 240 Volts complete all as specified and directed.

S&F MCCB TPN 100 Amps, 415 Volts, 4 POLE, 25 KA complete all as specified and directed.

M&L for earthing complete with galvanised steel earth plate electrode 600 x 600 x 6.0 mm thick directly burried in the ground (earth pit not less than 2.25 m deep below ground level) with top edge of earth plate not less than 1.50 m deep below normal ground level, connected to galvanised iron earth wire 4.00 mm dia by means of bolts, nuts, check nuts and washers of galvanised iron or steel, watering pipe 20 mm bore GI medium grade, concrete chamber in PCC (1:4:8) type D-2 using 40 mm grade crushed stone aggregate, coping shall be in PCC (1:3:6) type C-1 using 20 mm grade crushed stone aggregate and internal surfaces of concrete chamber shall be given 12 mm thick plaster in CM (1:4), funnel with wire gauge of 22 gauge 8 mesh per linear including 50 mm thick cover of RCC (1:2:4) type B-1 using 20 mm grade stone aggregate reinforced with 8mm MS TMT bar @ 75 mm C/C both ways, char coal dust and common salt all as shown in electrical plate No. 3 of SSR Part-I (2009) including all necessary excavation & earth work and removal of surplus soil to a distance n. exc 50 m and providing connection points with MS/ GI bolts & washers as required and connection from earth test point to earth electrode with same alongwith protection pipe and testing on completion complete all as specified and directed. Note :- GI earth wire 4.00 mm dia and protection pipe from earth electrode to test point max upto 7.50 m shall be deemed to be included in the unit rates as quoted by the contractor.

S&F GI pipe bracket suitable for security light fitting, made out of 25 mm dia 0.9 m long GI pipe light grade and 2 set of clamps made out of 30 x 5 mm ms flat & fixed with anchor bolt including taking down of old unserviceable bracket complete all as specified and directed.

S&F LED security light fitting of 35 Watts, 230 Volts, AC outdoor type with high pressure dia cast aluminium hosing and heat resistant complete with driver, lamp bracket with impact and corossion resistant including thermal management in multiple optics complete with IP 65/66 protection complete all as specified and directed.

Taking down old geysers of any make and size and refixing the same after the repair work including cleaning complete all as specified and directed.

Fixing only and connecting electric meters upto 25 Amps complete all as specified and directed.

Schedule of credit amount of Rs. 77,968.00 to be deducted during AOC.

GHANI CONSTRUCTION

J.P ENTERPRISES

Goodluck Enterprises