Item-2 Street Lighting and miscellaneous electrical work at Community Center Sector-5 in Indira Gandhi Nagar, RHB Jaipur

Amount

Providing & Fixing of IP40 LED Surface/ Recessed / suspended mounting Mid power SMD type LED Light fixture made from CRCA sheet steel housing, high purity / transmisivity UV stabilized Non - yellowish diffuser for uniform light distribution. High efficiency with 2.5 KV internal/external surge protection BIS certified isolated driver having efficiency > 85% , with Short & Open circuit protection and in compliance to IEC standards (Integral with light fixture). System lumen efficacy of ≥ 120 lm/Watt ,THD < 10 % , p.f.≥0.95,CRI >80 , life time of minimum 50000 Burning Hours with , 70% of intial Lumen maintaned till life ends , CCT 3000°K / 4000°K / 5700°K /6000°K/6500°K (As per ANSI Bin) , maximum power consumption should not more than the specified rating and Fixture shall be of BIS standard and trade mark certificate ( T.C.). Manufactures Word Mark/ Name Engraved/ Embossing/ Screen printing on housing. OEM must have its own in house NABL lab setup for all testing facilities for LED fixtures. (LM79/LM80) certificate / Report from OEM shall be submitted. All as per pre approved by engineer in charge . foe additional technical parameters of product/ work, refer Annexure "A" attacheded with this BSR.

Suspended Mounting/Surface Moutning

48W LED light fixture 2'x2' with acrylic / prismatic front cover.

Providing & Fixing of IK07 IP-66 protected high power LED flood light system with Pressure diecast aluminium housing LM6/ ADC12 material , toughened glass diffuser with suitable lenses on LED to achieve various beam angles, 240 volt, 50Hz, of high power LED lamps . Integrated driver must be potted & has a unique BIS R number shall be high efficiency having efficiency more than 85 % and in compliance to BIS certified and T.C. certificate. The System level Luminaire efficacy >=120 lm/ wt with High Power LEDs is to be used . LED driver Input Voltage AC 120 to 270 V AC with High voltage Cutoff @>=300 V AC and Auto resetting Safety . Input Frequency 50Hz±3%, Power Factor >0.95 ,driver Efficiency >85% , THD(I) <10% , driver current <1000mA shown in LM79 report. driver should be Phase to phase protection of 440 V for 4 Hrs. Electrical Connector Must be provided, SurgeProtection Min >=4KV internal and 10KV external, System life of 30000Burning hours with 70% of Initial Lumens maintained, color Rendering Index >70 and CCT 5700K ±355K. Driver current <1000mA shown in LM79 report. Manufactures Word Mark/Name Engraved/Embossing/Screen printing on die cast housing to allow traceability/authenticity. Fixture shall be IS 10322 Complianced. OEM Must have its own in house NABL lab setup for all testing facilities for LED fixtures. (LM79/LM80) Certificate/ report with liable warranty of product/accessories from OEM shall be submitted. All as per pre approved by Engineer in charge. For additional technical parameters of products/ work , refer Annexure "A"attached with this BSR .

High Power LED Flood Light 180W

Supply and installation of 3.5 Mtr Decorative mild steel pole galvanised tubular pole having Different profile with cast iron Embellishment E6 with hanging for twin nos. bracket. Bottom profile 1000mm x 140 mm x 4.0 mm and upper profile 2500 mm x 75 mm x 3.0 mm. The pole has a service window at bottom profile. Pole is primer coated and PU painted. Decorative pole shall be istalled at install at desired location including foundation of the pole by making cement concrete foundation of 1:2:3 (1 cement : 3 course sand : 6 graded stone aggregate 40 mm nominal size ) with the help of anchor bolts and 38 mm G.I. sleeve as required.

Supply and installation of 24 watt LED post Top Luminaire made of alluminium housing duly powder coated /PU painted with PC/PMMA clear/ Frosted diffuser with sturdy six arm. MCPCB having high lumen led's are mounted on aluminium heat sinks. A two way connector shall be provided in the luminaire in the luminaire for the mains connections. Luminaire shall be installed at the desired location on the decorative pole, complete all in direction of engineer in charge.

Supply and installation of outdoor light 6 watt LED outdoor spot with small mounting bracket made up of die casting grey powder coated aluminum protection class IP 65. Stainless stell screws. The Dimension fixturesshall be 50*120 mm, with, Cri >80 , 2700K CCT, beam angle of 10 degree. Luminaire prewired with LED Driver and Suitable for operation on.

Supply and installation of outdoor light 4 watt LED inground Luminaire Grey powder Resistance with Low Copper Content. Hard Chromeplated Stainless steel 316 Grade Front Ring MoldingShaped seal Gasket. Stainless Steel Screws. Mechanical Resistance IK10 with Protection Class IP65. The Dimension of fixture shall be 62 * 85 mm. With CRI >80 2700K CCT and Having A beam Angle of 10 Degree Model No. LLO-129E, Luminaire Prewired with LED Driver and Suitable for Operation On.

30watt LED COB Surface Square Downlighter. Luminaire made of die-cast aluminium for better thermal management. Dark light technology . Precision engineered high quality optics & electro plated reflector. Powered by CITIZEN / CREE, CRI >80 With Colour Tem 4000k. Beam Angle : 30° with diffuser Protection class IP20 for LED Module. CE -Conformity mark. High PF constant current LED driver with surge and thermal protection.Cable entries for through-wiring of mains supply cable.Suitable for operation on 240V, 50Hz single phase ac supply Model No LLLS-046B. LM 79 Report to be submitted with luminarie.Make:pesolite

Bidder Name

Amount

PUNIT ENTERPRISES(GSTN-08AFAPB2034C1ZE)

K.K.Enterprises(GSTN-08AKAPM6812E1ZE)

PUNIT ENTERPRISES

PUNIT ENTERPRISES