INTERNAL AND EXTERNAL PERIODICAL SERVICES AND OTHER MISC B/R WORKS AT OTM ACCN 35 INF BDE, 18 MADRAS, 18 GRENADIERS, 227 FD WORK SHOP AND 35 INF BDE SIG COY UNDER AGE B/R II OF GE (SOUTH) DELHI CANTT-10

Amount

Cutting of vegetable plant (girth not exceeding 300mm) from roof, terrace, chajjas etc digging out the roots and making good the surface in PCC 1:2:4 type B1 with surfaces finished to match complete including scaffolding etc, complete all as specified and as directed.

Taking down cement or cement lime plaster, any description, on brick or stone walls, concrete surface etc including raking out joints, hacking for key, scrubbing down with water etc, complete all as specified and as directed.

M&L rendeing 15 mm thick on stone masonary surface other then fair faces surfaces in CM 1:4 finished even and smooth without using extra cement complete all as specified & directed.

M&L rendeing 10mm thick on stone masonary surface other then fair faces surfaces in CM 1:6 finished even and smooth without using extra cement complete all as specified and as directed.

M&L rendeing 5mm thick on ceiling surfaces in CM 1:3 finished even and smooth without using extra cement complete all as specified and as directed.

M&L for preparation of newly plastered surfaces of wall and applying two coats of Asian wall putty upto 2-3 mm to get even or smooth surface complete all as specified and directed by engineer-in-charge.

M&L for applying two coats of OBD with spray machine over a coat of primer complete all as specified and as directed.

M&L for preparation of newly plasered surfaces of walls and applying two coat of cement based paint over a coat of alkali resistant primer, complete all as specified and as directed. .

M&L for preparation of newly plasered surfaces of ceiling and applying three coat of white wash, complete all as specified and as directed.

M&L for preparation of newly plasered surfaces of wall and applying three coat of white wash, complete all as specified and as directed.

M&L for complete removal of existing treatment under (Cement based paint/Exterior weather paint/Oil paint/ white wash etc) by scrapping with mechanical wall sander on wall/ceiling (having mechanical vacuum mechanism) having RPM not less than 1500, sending pad of 80 grit having dia of 7"/9" to make the surface free from dust, loose paint , removal of nails etc and filling cracks/ holes and windows /doors jams by putty & repairs in good shape by skilled labour and applying two coats of cement base paint, white or tinted (colour and shade as per new colour scheme approved by GE) over a coat of Priming plastered and other surfaces with alkali resistant priming paint primer of same make including scaffolding for two/three storey building complete all as specified and directed.

M&L for preparation of old decorated wall surfaces and applying one coats of cement base paint, white or tinted (colour and shade as per new colour scheme approved by GE) including scaffolding for two/three storey building complete all as specified and directed.

M&L for complete removal of existing treatment under (OBD/APEX/Cement based paint/Oil paint/ white wash etc) by scrapping with mechanical wall sander on wall/ceiling (having mechanical vacuum mechanism) having RPM not less than 1500, sending pad of 80 grit having dia of 7"/9" to make the surface free from dust, loose paint , removal of nails etc and filling cracks/ holes and windows /doors jams by putty & repairs in good shape by skilled labour complete all as specified and as directed.

M&L for waterproofing cement based putty @ 1KG (undiluted) per square meter of average thickness 1-2 mm over the plastered/Old painted wall /ceiling after a scrapping to prepare the surface free from dust etc, by skilled labor as per following steps :- Step 1 :- Mix the putty powder by adding water as per manufacturer instructions and mix it with wall mixture with the mixing capacity of minimum 2.5 kg putty per minute Step 2 :- Applying the first coat of prepared mixture with the help of fully automatic airless spray machine of putty application having flow speed of maximum 6 liters per minute with a maximum pressure of 3300 PSI Step 3 :- Allow 6-8 Hrs time to dry the putty surface.

M&L for applying two coats of oil bound distemper on wall/ceiling using Airless spray technology with max working pressure of 3300 PSI and capable of operating single spray gun with a max material hose length of 30 Mtr the spray machine should be of reputed manufacturer with pro guard technology and capability of tracking pressure and paint usage and certified by pain manufacturer and as mentioned in PS and accessories for applying distemper should be able to spray in hard to reach areas and penetration of distemper on the surface complete all as specified and directed. Make Asian or equivalent

M&L for applying one coats of oil bound distemper on wall/ceiling using Airless spray technology with max working pressure of 3300 PSI and capable of operating single spray gun with a max material hose length of 30 Mtr the spray machine should be of reputed manufacturer with pro guard technology and capability of tracking pressure and paint usage and certified by pain manufacturer and as mentioned in PS and accessories for applying distemper should be able to spray in hard to reach areas and penetration of distemper on the surface complete all as specified and as directed.

M&L Applying one coats APEX with Graco-490 spray machine, of GreenPro certified water-based, modified acrylic, exterior Apex Suprema Emulsion or equivalent as per required shade (Company depot tinted) with silicon additives, heat reflectant property, VOC less than 2% by mass, Class A IS-15489 and IS-101 @5-6sqm/ltr after cleaning and removing dirt dust oil grease smog efflorescence stain, thoroughly brushing the surface and removal of existing paint flakes, to obtain an even surface ,necessary tools and machinery to give an even shade. Application to be done only by applicator authorised by manufacturer, also shall be approved by GE before starting of work.

M&L for preparation of old surfaces of wall and applying one coats of white wash, complete all as specified and as directed.

M&L for preparation of old surface of ceiling and applying one coats of white wash, complete all as specified and as directed.

M&L for preparation of old wooden surfaces of any description not otherwise described over 10 cms width or girth and apply one coat of synthetic enamel paint, complete all as specified and as directed.

M&L for preparation of old wooden surfaces of any description not otherwise described over 10 cms width or girth and apply two coat of synthetic enamel paint, complete all as specified and as directed.

M&L for preparation of old steel surfaces of any description not otherwise described over 10 cms width or girth and apply one coat of synthetic enamel paint, complete all as specified and as directed.

M&L for preparation of old steel surfaces of any description not otherwise described over 10 cms width or girth and apply two coat of synthetic enamel paint, complete all as specified and as directed.

M&L for chipping of spelled and loose concrete and cleaning rust from reinforcement by sand blasting, scrubbing down concrete surfaces with wire brushes cleaning with water allowed to dry applying a layer of zinc rich epoxy primer as anti rust on all exposed reinforcement followed by a layer of bonding coat of a layer of epoxy adhesive on complete exposed surfaces of concrete and provide gunniting in two layers over steel welded mesh 2 mm dia of wire and total aperture 75 mm, thickness of gunite n.exc 25 mm thick (average thickness) using cement mortar 1 :2 with OPC 43 grade cement mixed with polycrete admixture @ 2 % by weight of cement or as per manufactures instructions and finally applying cement plaster over gunite surfaces of required thickness to give an even uniform and smooth finish conforming to proper geometrics in cement mortar 1:4 to match with the existing surface as in side and soffits of slabs, chajjas, fins, facias, parapets, columns and beams etc complete including necessary shuttering & scaffolding , shuttering necessary chased to brick work or RCC members at any height upto full height of buildings including removing of small trees shrubs etc complete all as specified and directed. (Note: Steel mesh to be welded with the existing reinforcement. The cost of welded mesh is deemed to be included in the unit rate quoted.)

S&F in repair stainless steel wire cloth, 0.63mm nominal dia or wire and sqm average width or aperature 1.40mm, fixed with tinned tacks or galvanised wire staples to doors/steel windows, complete all as specified and as directed.

Hacking out old broken glass (any thickness, size, quality or description) from wooden/steel frames or stone, concrete or brick surrounds, glazed with putty or fixed with beads metal frame including punching or drilling out old glazing pins/spring clips and providing and fixing new sheet glass 4 mm thick , ordinary quality and glazing with oil putty or wooden beads in squares not exceeding 0.50 sqm in each pannew ones complete all as specified.

M/S Parmod Johar (BID ID -3077616)

R.P Builders (BID ID -3078179)

Shree Ganpati Enterprises (BID ID -3072567)

M R INTERIOR HUB (BID ID -3081435)