Repair/replacement to joinery flooring plastering sanitary fittings, internal water supply and certain associated works at sewar fort under GE Bharatpur

Amount

M&L for Rendering 15 mm thick in CM (1:4) on stone masonry surfaces or surface other than fair face of brick-work or on one side of lathing complete all as specified & as directed

Ditto as above item no 2 but in CM (1:6) on fair faces finished even and smooth without using extra cement complete all as specified & as directed

M&L for rendering 15 mm thick in CM (1:4) on stone masonry surfaces or External surface of brick-work or on one side of lathing upto 10 m height ,finished fair & even Including taking down cement plaster of any description etc including racking out joints,hacking for key, scrubbing down with water complete all as specified & as directed

Ditto as above item no 3 but in CM (1:6) on fair surface finished even and smooth without using extra cement complete all as specified & as directed

M & L Preparation of new plastered or un plastered surface of wall including cornices, pilasters etc by brooming down and applying two coats of distemper oil emulsion white or tinted over a coat of alkali resistant primer including1.5 mm wall care putty (in Two Coats) below primer complete all as specified and as directed

M&L Preparation of new plastered surfaces of walls or un plastered surface and applying two coats of cement base paint over a coat of primer with hand roller complete all as specified and as directed by Engr-in-Charge.

M&L Preparation of newly plastered surfaces of Wall & applying three coats of white wash complete all as specified.

Demolition of brick masonry built in cement mortar or cement lime mortar including all quoins, arches, pillars etc but excluding ashlar facings,dressed stone work and precast concrete articles as spd and directed by Engr-in-Charge.

M&L Brick work with sub class 'B' old size bricks bricks straight or cured on plan exceeding 6 m mean radius built in cement mortar 1:6 complete all as specified & as directed

Ditto Item No 09 but except bricks

Taking down chowkats or frames n. exc 1.5 sqm each with shutters (without taking off shutters from the frame).

Taking down chowkats or frames exc 1.5 sqm but n exc 4 sqm each with shutters (without taking off shutters from the frame)

Taking down shutter of any description area exc 1 sqm and n. exe 2 sqm

S&F for sollid PVC door frame of size 50mmx47mm made out of 5mm plain colour pvc sheeet reinforced with m.s. squre tube complete all as specified and directed.

Supplying & fixing in the frames at site factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes for top & bottom rails. MS frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded/sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement all as specified and shown in SSR 2020 (Part-II) and Particular specification.

S&F 35 mm thick 2nd class hardwood( hollock ) factory made plain framed, panelled shutters (any No. of panels) with lock rail and panel of 9mm BWP commercial ply or 12 mm veneered particle board with commercial veneering on both faces the size of rail & stiles as per IS:1003 (Part-I) kiln seasoned and chemically pressure treated complete all as specified & directed

S&F 35 mm thick 2nd class hardwood ( hollock ) factory made glazed and skeleton shutters open rebated and prepared to receive glass, gauge etc.( without sash bars ), edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass, gauge etc., sizes of members of shutters as specified in SSR Part I Section 8 clause 8.24 (a) complete all as specified & directed .

M&L for rolled mild steel framed work such as grill grating etc with ends of bars shouldered and/or riveted, or forged into spikes, framed guard bars, barred iron doors , laddres, door gate frame, framed baliusters, walk ways, railing , frame work of water tank and similar work conforming to Fe-290, Gde-E-165

S&F MS holdfast, hook and pintle hinges, large hasp and staples, clamps, hooks for hanging fans and similar small articles conforming to Fe-290 Gde E-165 including necessary welding etc. and fixed in position.

S&F 100 mm butt hinges medium weight cold rolled mild steel, ISI marked, fixed to angle iron chowkats including welding complete.

S&F 150 mm long mild steel barrel tower bolts stove enameled black with bright bolt (ISI marked)

Mild steel pressed steel bow handle oval type stove enameled black of size 150 mm (ISI marked)

S&F MS sliding door bolt, plate type, 300mm long, stove enamelled black, with bright bolt not less than 12mm dia with and including a minimum of 6 bolts & nuts, 4 on bolt plate and 2 on staple plate and fixed.

S&F extruded aluminium alloy handle 150mm size fabricated type anodised, ISI marked .

S&F Aluminium anodised barrel tower bolt 150mm long of extruded section and fixed

S&F 75 mm butt hinges medium weight cold rolled mild steel, ISI marked, fixed to angle iron chowkats including welding complete.

S&F for Factory made steel window with side hung shutteers including projecting type hinges with steel handle and steel peg stay complete with glazing bars dovetailed or welded

All as per item No 27 above but without glazing bars.

M&L dismantling floor,hearth or wall tiling including cement mortar bedding (but not backing) , removing serviceable tiles to store and rubbish off the premises all as specified.

M&L Glazed ceramic Tiles,in verticle surface 350X250 X7mm / 450X300X7mm set & jointed in neat cement sluury and pointed in white or colour cement to match the existing surface over and including 15mm thick rendering in CM 1:4 complete all as specified & directed.

M&L for Coloured Non skid ceramic tiles 7 to 8 mm thick (Square/rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, set and jointed in neat cement slurry and pointed in coloured cement over & including 15mm thick rendering in CM 1:4.

M&L for coloured Glazed ceramic tiles in vertical surfaces of size 300mm x 200mm, 7mm thick , set and jointed in neat cement slurry and pointed in white or coloured cement to match the existing surface over and including 15mm thick rendering in CM 1:4 complete all as specified & directed.

Demolition of cement concrete unreinforced in ground floor and paving n.exc 15 CM thickness (below or above GL) complete all as specified and as directed .

Providing and laying double charged vitrified floor tiles in 600X600mm sizes (thickness to be specified by the manufacturer),in required combination of themes, with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in any colours and shades, laid on 15 mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc., complete.

M&L for plain cement concrete 1:3:6 type C-1 1:4:8 (20 mm graded aggregate) as in foundations, filling and mass concrete complete all as specified and as directed .

Dismantling of stone slab and tiles of any description or thickness in floors, etc. laid dry & laid dry in pointed complete all as specified and as directed .

M&L for Machine cut kota stone slab flooring 18-20 mm thick over & including cement screed 20 mm thick in cement mortar 1:6, laid and jointed with gray cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and as directed .

M&L for Machine cut kota stone slab 12-15 mm thick in riser of steps, skirting, dedo and pillar laid over & including 15 mm thick rendering in cement mortar 1:4, laid and jointed with gray cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete.

Providing and fixing 20 mm thick gang saw cut, mirror polished, premoulded and prepolished,Granite of any colour and shade machine cut for kitchen platforms, vanity counters, window cills, facias and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including providing opening of required size & shape for wash basin/ kitchen sink in kitchen platform, vanity counter and similar location in marble/ Granite/ stone work, including necessary holes for pillar taps etc. rubbing, cutting, moulding and polishing to edges to give high gloss finish etc. complete all as specified and as directed .

Cutting, polishing existing Kota/ marble floor flooring,& verticle surfaces (three cuttings and mirror polishing) including Manson polishing, levelling certain places to Kota/ marble floor ,necessary repair work & all necessary arrangmentscomplete all as specified and as directed By Engineer-in-Charge at site

S&F 3 mm thick plain sheet glass ordinary quality and glazing with oil putty in square not exceeding 0.5 in each pane including hacking out old broken glass (any thickness, size, quality or description) from wooden frames or stone, concrete or brick surrounds glazed with putty or fixed with beads complete all as specified & directed.

M&L for Sheet glass ordinary quality 3 mm thick and glazing with oil putty in square n. exc 0.50 sqm in each pane complete all as specified and as directed.

S&F Galvanised mild steel wire cloth, 0.56 mm nominal dia of wire and average width of aperture 1.00 mm and fixed with tinned tacks, or galvanised wire staples complete all as specified and as directed .

S&F repair bib tap, cast copper alloy, with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule of 15 mm bore, fixed in repairs complete all as specified and as directed .

S&F in repair brass ball valve, high pressure with polythene float and fly nut complete screwed for iron pipe or brass ferrule and fixed of 20mm bore, fixed in repairs.

S&F in repair of pillar tap, cast copper alloy with capstan heads,chromium plated, fancy type screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks & fly nuts, screwed for iron pipes of 15mm bore including taking down old pillar tap complete all as specified and as directed .

Dismantling of interlocking tiles of any description , any thickness complete all as specified and as directed .

M&L 100 mm thick PCC 1:4:8 type D-2 (using 40mm graded aggregate) as in sub base/ sub floor complete all as specified & directed..

M&L Sand cusion under floor ,spreading and levelling in layers 25 mm thick complete all as specified and as directed .

M&L for 60mm thick & M-35 factory made chamfered edge Cement Concrete paver blocks in footpath, parks, lawns, drive ways or light traffic parking etc, of required strength, thickness & size/ shape, made by table vibratory method using PU mould/rubber molded, laid in required colour & pattern over 25mm thick compacted bed of sand, compacting and proper embedding/laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand. complete all as per direction of Engineer-in-Charge Note :-Sand shall be measured and paid in respective items of BOQ.

Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified & as directed

S&F Rolled Mild Steel work as in post ,roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections,ms pipe) including distance pieces, cleats etc. conforming to Fe-410W Gde E-250 quality 'A' complete all as spcfd & as directed .

Excavating in post holes (or similar holes) each not exc 0.50 cum, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers n.exc 25cm, watering, and removing surplus soil to a distance n.exc 50 m and making good surface in soft/ loose soil.

Dismantling Asbestos cement ( corrugated and semi corrugated) sheets in roof coverings.

M & L for Pre- painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of any colour having tensile strength of 550 mpa as in roof covering / cladding to wall, fixed with self tapping screws complete all as spfd & directed.

M&L for preparation of new untreated steel surfaces of any description not otherwise described over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer.

M & L prepration of new wood or wood based surface of any description over 10 cm widtgh or girth and applying two coats of synthetic enamel paint over a coat of pink primer.

M&L for one coats painting with synthetic enamel paint to old wood or wood based surfaces of any description, not otherwise described over 10 CM width or girth including preparation of surface including all preparatory work complete all as specified.

M&L for one coats painting with synthetic enamel paint to old steel or steel based surfaces of any description, not otherwise described over 10 CM width or girth including preparation of surface including all preparatory work complete all as specified and as directed .

S&F of 500 ltr ISI marked three layer rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position & including 20mm brass ball valve Including dismantling of existing water tank of 500 Ltr capacity complete all as specified and as directed in ssr part-I

Demolition of PCC in roof covering, kerbs, roof kerbs, benching, coved fillets etc including old decayed water proofing treatment of any type all as specified & as directed (also including the rate for disposal of building rubbish/ malba of dismantled or waste material collected after demolition of existing treatment & dumping for lead upto 1km for all lifts)

M&L for 40mm thick PCC 1:2:4 type B-1(using 20mm graded stone aggregate) in roof covering , benching , etc & finished even and rough all as per directed complete all as specified & directed

M&L for screed bed or bedding layer of 15 mm thick cement mortar 1:4, for floor finished even & smooth without using extra cement complete all as specified & directed (mixed with WPC) Note :- WPC Shall be measured and paid seprately.

Supply only water proofing compound ISI marked

M&L for Preparing surface for roof treatment by removing all looase gravel ,dirt ,oil & foreign matter by jet of dry air and clean the surfaces mechanically or by grinding to make it smooth before application ,provide 75X75mm coving made out of PMC mortar as above on all joints of vertical up stands to ensure does not exceed 5% immediately before application of liquid membrane material incorporation & protection to be provided ,applying fibre reinforced elastomeric liquid water proofing membrane with resilient acrylic polymers having Sun Reflectivity Index (SRI) of 105 on top of concrete roof in three coats @10.76 litre/ 10 sqm with 1st coat appllied in water ratio (ratio elastomeric liquid water proofing membrane :water will be 3:1) as primer, after the 1st coat is completly dry becomes slightly darker than apply 2nd coat with undiluted elastomeric water proofing liquid in criss -cross direction with roller .spread glass fibre mesh reinforcement of 1mm thickness with overlap of 50mm in both direction when the surface is still tacky . After the drying of of 2nd coat completly apply the final coat of undiluted elastomeric water proofing liquid in a direction parpendicular to previous coat .the min. thickness of dry film of complete application should not be less than the as recommanded by manufacture. the overall dry thickness should not be in any case less than 1.5mm complete all as specified & as directed.

S&F in repair Brass Chromium plated central hole basin including mixer with fixed spout complete all specified. (Make;- Kerovit Catologue No :KB711026 or equivalent in Jaquar ,paerryware .)

M&L for PVC connection 15 mm size with PTMT nuts of length 600 mm complete all as specified and as directed .

S&F for in repair Brass Chromium plated long body Bib cock with wall flange complete all as specified and as directed . (Make;- ESSCO cat part no APR 105107 oror equivalent in Jaquar ,perryware)

S&F for in repair Brass Chromium plated Angular stop cock with wall flange complete all specified. (Make;- ESSCO cat part no APR 101053 or equivalent in Jaquar ,paerryware)

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge.

25 mm bore

20 mm bore

S&F in repair viterous china Table Top Basin with CP waste coupling, Size: 500x420x120mm complete all as specifies (Make;- Jaquar Registered design FLS-WHT-5935 or equivalent in Hindware ,perryware

S&F in repair for PVC wall panelling in repair with panel of 300 mm x 6 mm Hollow section of Sintex pattern SPUF- 146 or equivalent , fixed with PVC plug and screw and inserted to next panel groove, edges and corners of all door/ window/openings etc to be covered with PVC angel fixed with solvent cement complete all as specified as manufacturer's Instructions

Providing and fixing 12 mm thick frameless toughened glass door shutter of approved brand and manufacture, including providing and fixing top & bottom pivot & double action hydraulic floor spring type fixing arrangement and making necessary holes etc. for fixing required door fittings, all complete all as specified and as directed by Engineer-in-Charge. Note:- Rate of Door Handle ,Lock & door closer etc deemed to be in quoted rate )

S&F toughened glass of approved make and brand of 10mm thick coloured /tinted /smoke / clear glass confirming to IS-2563(Part-I) 1990 for partition using glazing clips & cleats and special metal sash putty alongwith all fixings and fixtures. complete all as specified and directed.

Repair and maint to aluminium door & window shutters alongwith necessary fittings and fistures such as hinges ,rubber washer ,rubber seal ,aluminium beadings etc all as specified & directed

S &F 18mm thick solid PVC ply of first quality of one side prelaminated of approved colour and one side white colour fixed with screw 'solvent cement/adhesive to make cupboard shutter complete all as specified and directed.Make : Rajshree/Sintex or equivalent make approved

S &F 18mm thick solid PVC ply of first quality of one side prelaminated of approved colour and one side white colour fixed with screw 'solvent cement/adhesive to make kitchen cabinet side , top and bottom shelves inside the cabinet and shutter and drawer complete all as specified and directed.Make : Rajshree/Sintex Rajshree/Sintex or equivalent make approved

S &F 18mm thick solid PVC ply of first quality of both side white colour fixed with screw 'solvent cement/adhesive to make shelves, partitions and drawers etc for kitchen cabinet and cupboards complete all as specified and directed.Make : Rajshree/Sintex Rajshree/Sintex or equivalent make approved

S &F stainless steel (SS-204)cup saucer basket of size 19"X20"X4" as per approved sample complete all as specified and directed.Make : Ultrafresh/kitchen gold or equivalent.

S &F stainless steel (SS-204) tall basket basket of size 8"X19"X20" as per approved sample complete all as specified and directed.Make : Ultrafresh/kitchen gold or equivalent.

S &F stainless steel (SS-204) plate basket of size 19"X20"X6" as per approved sample complete all as specified and directed. Make : Ultrafresh/kitchen gold or equivalent.

S &F stainless steel (SS-204)cutlry basket of size 21"X20"X4" as per approved sample complete all as specified and directed. Make : Ultrafresh/kitchen gold or equivalent.

S & F sliding telescopic channel high grade mild steel, bright finishor electrogalvanised of size 20" as per approved sample complete all as specified and directed.

S & F stainless steel handle of 110mm size of best quality as per approved sample complete all as specified and directed.

S & F magnet catch for kitchen cabinet shutter as per approved sample complete all as specified and directed.

S & F soft closing hinges O 'degree' high grade mild steel or electrogalvanised as per approved sample for kitchen cupboard shutters complete all as specified and directed.

S & F colour powder coated mild steel continuous (piano) hinge, width of flaps(when open) is 30mm complete all as specified and directed.

S & F 150mm long hasp & staple, safety type aluminium anodised with mild steel hinge pin including bolt to hinge plate and fixed with screws complete all as specified and directed.

Supply and fixing in repair anodized snap grid frame work of size 605mm x 605 mm for false ceiling including necessary notching. The snap grid shall consist of anodized aluminium main & cross tee of size 36.5 x 25 x 1.4 mm weighing 0.24 Kg/RM and 23.5 x 26.4 x 1.40 mm weighing 0.191 Kg/RM respectively. The main and cross tee shall be jointed at junction crossing with anodized aluminum angle bracket of size 15mm x 15mm x 1.5 mm weighing 0.12 Kg/RM fixed with suitable MS bolts, nuts and washer. The snap grid (main/cross tee section) shall be supported at ends all along the wall with anodized aluminum angle of size 40 x 25 x 2 mm weighing 0.36 Kg/RM fixed to wall with suitable arrangement and providing 12 mm thick mineral fibre board of make Armstrong in fixed in grid support with 6.0 mm dia plain mild steel wire galvanised class 3 fixed in detached works etc to support snap grid, made of aluminum as per specification complete all as specified and as directed by Engineer-in-Charge.

M/S MAMTA CONSTRUCTIONS

PD GUPTA AND COMPANY

M/s Ranaji Construction Co

GANGA CONSTRUCTION

M/s Gupta Traders

VASUNDHARA AND COMPANY