repair and renovation of office complex of development officer E and T sericulture development departt jammu

Amount

Earth work in surface excavation not exceeding 30 cm in depth but exceeding 1.5 m in width as well as 10 sqm on plan including disposal of excavated earth, leadupto 50meter and lift upto 1.5m. As directed by Engineer-in-charge. All kinds of soil.

Demolishing cement concrete manually/by mechanical means including disposal of material within 50 meters lead as per direction of Engineer-in-charge:1:3:6 or richer mix (i/c equivalent design mix)

Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centering and shuttering . All work upto plinth level with: 1:2:4( 1 cement :2 coarse sand:4 graded stone aggregate 20mm nominal size)

Raking our joints in lime or cement mortar and preparing the surface for re-pointing or re-plastering, Including disposal of rubbish to the dumping ground within 50 meters lead.

Flushing pointing with cement mortar 1:3 (1 cement : 3 fine sand) mixed with 2% of integral water proofing compound by weight of cement for flat tile bricks on top of mud phaska:With non modular brick tiles.

Providing and fixing G.I.pipes complete with G.I. fittings and clamps, including cutting and making good the walls etc:20 mm dia,nominal bore (medium)

Providing and placing on terrace ( at all floor levels) polyethylence water storage tank ISI: 12701 marked, with cover and suitable locking arrangements and making nessary holes for inlet, outlet and overfolw pipes but without fittings and the base support for tank.

Providing and fixing water lift pump 1 H.P with all fittings complete . Havells/ Crompton/Kirloskar.

Engagement of Plumber for general maintenance.

Engagement of labour for cleaning of site and man-holes etc.

Finishing walls with acrylic smooth exterior paint of required shade on New work (Two or more coats applied @ 1.67 liter/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm)

Removing dry or oil bound distemper, water proofing cement paint and the like by scrapping and sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete.

Repairs to plaster of thickness 12mm to 20 mm in patches of area 2.5 sq.meters and under , including cutting the patch in proper shape raking out joints and preparing and plastering the surface of the walls complete including disposal of rubbish to the dumping ground within 50 meters lead .With cement mortar 1:4 ( 1 cement : 4 fine sand)

Painting with synthetic enamel paint of approved brand and manufacture to give an even shade.Two or more coats on new work.

Providing and fixing heavy duty decorative premium PVC panelling (8mm thick) and weight of sheet not less than 4.5 kg /sqm.

Providing and fixing tiled False Ceiling of specified materials of size 595x595mm in true horizontal level suspended on inter locking metal grid of hot dipped galvanized steel sections ( galvanized @ 120 gms/sqm both side inclusive ) consisting of main "T" runner with suitably spaced joints to get required length and of size 24x38 mm made of 0.30mm thick (minimum) sheets spaced at 1200 mm centre to centre and cross"T" of size 24x25 mm made of 0.30 mm thick (minimum) sheet, 1200 mm long spaced between main "T" at 600 mm centre to centre form a grid of 1200x600 mm and secondary cross "T" of length 600 mm and size 24x25mm made of 0.30 mm thick (minimum) sheet to be interlocked at middle of the 1200x600mm panel to form grids of 600x600mm and wall angle of size 24x24x0.30mm and laying false ceiling tiles of approved texture in the grid including wherever , required cutting/making, opening for sevices like diffusers, grills, light fittings, fixtures, smoke detectors etc. Main "T"runners to be suspended from ceiling using GI slotted cleats of size 27x37x25x1.6mm fixed to ceiling with 12.5mm dia and 50mm long dash fasteners 4mm GI adjustable rods with galvanized butter fly level clips of size 85x30 x 0.8 mm spaced at 1200 mm centre to centre along main "T" , bottom exposed width of 24mm of all T -sections shall be prepainted with polyster paint, all complete for all heights as per specifications, draings and as directed by Engineer-in-charge. 12.5mm thick square edge PVC laminated gypsum tile of size 595x595mm , made of Gypsum plaster board manufactured from natural gypsum as per IS: 2095 part-I and laminated with 0.16 mm thick fire retardent PVC filem on the face side and 12 Micron metalized polister on the back side with all edges sealed with the face side PVC film which goes around and wraps the edge and is bonded to the edge and the back side matalized polyster film so as to make the tile a completely sealed unit.

Carriage of Material by Machenical Transport including Loading , unloading & stacking at site complete.

Sand/stone aggregate upto 40mm (av.distance of 15 km)

Bidhee Singh

VIJAY BIJYAL

Sumit Anand