RENOVATION OF TOILETS ENTRANCE LOUNGE ETC AT BISAG-N DELHI OFFICE UNDER GE NEW DELHI

Amount

M&L for Elegant Tile made of perforated cement fiber composite 595x595/295X1195 /595X1195x5mm covered with absorptive microfiber coating on the front side and Acoustics fiber on the back side, water resistance, fire resistant absorption coefficient upto 0.89 at 160 Hz tested as per ISO 354. The tiles are anti-sag and installed on T24 grid system of 0.6mm thick Main 'T' length minimum 3000mm, web minimum 35mm to be placed at 600mm center to center and secondary cross 'T' of length 600mm web minimum 35mm inter locked, Wire Support for Main T to be taken at every 1200mm length wise and 600mm width wise, with a backing of 50mm 1000 GSM thick absorb wool tested as per Fire Retardant IS 15061-2002 for excellent results complete all as specifed and directed.Make: Himalyan Acoustics/Heradesign/BAUX

M&L for Cortex Tile made up of 'Wood fiber cement composite' 1mm width wood fiber 25mm thick covered with Acoustically Transparent Woven Fabric on the front side, with an option of colors of size 600 x 600 / 600x1200 mm having excellent noise absorption of 1 NRC(for the base panel) as per ISO:354 Fire Ratings as per BS 476 Part 5,6 and 7 class 1 and P, water resistant and thermal insulated. Installed with aluminium H Profile on G.I studs 600x600mm center to center 2400mm X 50mm web thickness 0.5mm, flanges 15 & 50mm fully knurled giving it high strength, hot dipped galvanized steel with 120GSM zinc coating with a backing of 50mm 1000 GSM thick absorb wool tested as per Fire Retardant IS 15061-2002 for excellent results complete all as specifed and directed. Make: Himalyan Acoustics/Heradesign/BAUX

Taking down chowkhats or frame without taking off shutters n.exc 1.50 sqm each complete all as specified and directed

M&L for Glazed Toughned door in 12mm thick toughened float glass door including providing and fixing of Floor spring, frosted film, SS handles and other connected fittings all as required, as per specifications, and as directed complete.

Demolition of Concrete of any description and in any position not otherwise specifically provided for and removing serviceable tiles to store and rubbish out of the office complex land complete all as specified and as directed.

M&L for 50mm thick cement concrete type D-2, 1:3:6 (20 mm graded agg) as in sub base complete all as specified and directed.

M&L for Recitified and Vitrified Matt finished full body decorative type tiles of size 600 mm x 600 mm of approved make, shade and pattern for flooring in required position laid on a 15mm thick bed of 1:4 cement mortar, including neat cement float, filling joints with coloured matching neat cement slurry, curing and cleaning etc. complete all as specified and directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding but not backing removing serviceable tiles to store and rubbish out of the office complex land complete all as specified and as directed.

M&L for decorative ceramic tiles of size 600 mmx300mm and above 8 to 10mm thick for dado and skirting in required position fixed on 10mm thick plaster of cement mortar 1:4, neat cement paste, filling joints with colour matching neat cement slurry, curing and cleaning complete all as specified & directed.

S&F for Stainless steel sink, 1.00mm thick for kitchen or laboratory, with plug, waste pipe, washers, including cantilever cast iron brackets, connecting union etc., overall size 495mm x 420mm with bowl size 410mm x 330mm x 160mm complete all as specified and directed.

S&F in repairs for snow white vitreous china EWC single piece type 360x640x685 mm including PP Soft Close seat cover, Hinges, Dual flush cistern fittings, fixing accessories, S trap fittings complete fixed in floor with brass screw complete all as specified and directed. Make : JAGUAR CAT Part No: SLSWHT-6851S110P/ Parryware CAT Part No – C841D(S-305)/ Hindware CAT No – 92562(S-220)/Roca

S&F in repairs of water closet squatting pan (Indian type W.C.pan ) with 100 mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required:White Vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests complete all as specified and directed.( Make Parryware/Jaquar/Hindware/Roca)

S&F in repairs for Main cabinet of size 770x450x450mm with wash hand basin vitreous china, of size fit to the cabinet with including fixing accessories, SS coupling and SS bottle trap complete all as specified and directed complete all as specified and directed. Make : PARRYWARE (Luna) Part No: C897W46 & C897T1C/HINDWARE/ PARRYWARE/Roca

S&F in repairs for white vitreous china battery based infrared sensor operated urinal of approx. size 610 x 390 x 370 mm having pre & post flushing with water (250 ml & 500 ml consumption), having water inlet from back side, including fixing to wall with suitable brackets all as per manufacturers specification and direction complete all as specified and directed. Make : Roca/Jaquar/Hindware/Parryware

S&F for Glass Urinal partition Chamfer Size 450x900mm made of 12mm thick heat strengthen glass with both side acid frost finish, cut & finish, fixed on wall using SS 304 Heavy "L" bracket with insert complete as specified and directed.

S&F in repairs for 15mm bore Brass chromium plated sensor faucet for wash hand basin with Pre-mixed water supply kit (Battery operated) pillar cock quarter complete all as specified and directed complete all as specified and as directed. Make : JAQUAR CAT Part No: SNR-15019PMPK/ HINDWARE CAT Part No – F380005/ PARRYWARE CAT Part No – G3102A1/ROCA

S&F for 15mm bore brass chromium plated bib cock with wall flange all as specified and directed. Make : JAQUAR CAT Part No: CON-107N/ HINDWARE CAT Part No – F400002/ PARRYWARE CAT Part No – G3104A1,/ROCA

S&F in repairs for 15 mm bore chromium plated fancy type brass angular stop cock with wall flanged screwed down high pressure screwed both ends for iron pipe or for unions complete all as specified and directed. Make : JAQUAR CAT Part No: OPP-CHR-15053PM/ HINDWARE CAT Part No – F460005/ PARRYWARE CAT Part No – G3153A1 /Roca

S&F for 15 mm bore brass chromium plated TWO way bib taps with knob to operate, complete all as specified and directed. Make : JAQUAR/ HINDWARE/ PARRYWARE/Roca

S&F for PVC connections 15 mm X 600 mm with PTMT nuts complete all as specified and directed.

S&F for cast copper alloy chromium plated health faucet with 1.0 mtr flexible pipe 15mm as approved complete all as specified and directed. Make : JAQUAR/ HINDWARE/ PARRYWARE/ROCA

M&L for cutting chases on brick or concrete surface for concealed water tubing or girth n.exc 10cm including making good of disturbed surfaces with PCC 1:2:4 type B0 using 12.5 mm graded aggregate complete all as specified and directed

S&F in repairs for 15mm bore of medium grade galvanised steel tubing with all fittings and fixed complete all as specified and directed complete to wall complete all as specified and directed.

S&F in repairs for 20mm bore of medium grade galvanised steel tubing with all fittings and fixed complete all as specified and directed complete to wall or laid in floor complete all as specified and directed.

S&F for chromium plated box type toilet paper holder, fixed to wall with chromium plated brass screws complete all as specified and directed.

S&F for chromium plated soap dish fixed to wall with brass screw complete all as specified and directed .

S&F for brass chromium plated towel ring square with round flange fixed with and including chromium plated brass screws and wooden /plastic cleats complete all as specified and directed . Make :- JAQUAR CAT Part No: AKP 35721P/ Parryware Cat Part No – T6402A1/ Hindware CAT Part No – F450023/ROCA

S&F for brass chromium plated tubular towel rails 20 mm dia D type, 60 cm long between flanges complete all as specified and directed.

S&F for CP openable type brass grating 125 mm size square or rounded etc. fixed with cement complete all as specified and as directed.

S&F for PVC (SWR) bends any radius in 110mm bore pipe complete all as specified and directed.

S&F for PVC (SWR) junction single, (Single T), equal or unequal in 110mm bore pipe complete all as specified and directed.

S&F for PVC (SWR) couplers in 110mm bore pipe complete all as specified and directed.

S&F in repairs for PVC (SWR) 75 mm bore pipes single socketed in any length with rubber ring joints, laid in trenches or in floors complete all as specified and directed.

S&F in repairs for PVC (SWR) 110 mm bore pipes single socketed in any length with rubber ring joints, laid in trenches or in floors/ to wall with necessary clamp complete all as specified and directed complete all as specified and as directed.

M&L for PVC (SWR) multi floor trap dia of outlet in 75mm with grating jointing with solvent cement complete all as specified and directed complete all as specified and directed.

M&L for factory made PVC kitchen/WHB cabinet 300mm deep (clear) and required size and 18mm thick PVC one side prelaminated celluca ply for cabinet sides, shelves partitions top and bottom sides including backing of cabinet fixed with each other with steel screw and solvent cement adhesive incl 1mm thick PVC lipping alround the cabinet & shelves & shutters with handle/knobs, magnetic catcher or as per manufacturing secifications etc complete all as per specified and directed. Note : The measurement of kitchen cabinet will be the finished area in elevation.

S&F for Aegis-U Shaped Lift Support Fixed size 700x412x527mm complete all as specifed and directed. Make : Jaquar CAT Part No T6805A1, Parryware, Hindware, Roca

M&L for frosted film fix on glass partition & doors as per design approved by Engr in Charge complete all as specified and directed.

M&L for Point wiring with 1.5 sqmm, single core ,PVC insulated, unsheathed FRLS cable, 1100 volts grade, IS -694 marked, with multi stranded copper conductor and earth continuity copper conductor cable of same size as in phase/neutral and connected to common earth dolly drawn through and including rigid PVC conduit of suitable size alongwith fittings and accessories, fixed /laid/concealed in walls/ceilings including cutting chases and making good to walls, floors and also incl suitable modular bottom sunk type procced steel terminal box and suitable modular top cover with frame of suitable modules all as directed by Engr-in- charge for the following :-

(a) One light/fan point controlled by one, one way switch.

(b) One three pin socket outlet 5 Amp controlled by one, one way switch on same board

(c) One three pin socket outlet 5 Amp controlled by one, one way switch on independent board

M&L for Point wiring with 4.0 sqmm, single core ,PVC insulated, unsheathed FRLS cable, 1100 volts grade, IS -694 marked, with multi stranded copper conductor and earth continuity copper conductor cable of 4.0 sqmm connected to common earth dolly drawn through and including rigid PVC conduit of suitable size alongwith fittings and accessories, fixed /laid/concealed in walls/ceilings including cutting chases and making good to walls, floors etc, and also incl suitable modular bottom sunk type procced steel terminal box and suitable modular top cover with frame of suitable modules all as directed by Engr-in- charge on independent board.

Supply and fix switch modular 6 Amps 1 module 230 Volts one way.

Supply and fix Modular switch 1 way 16 Amps 1 module 230 Volts.

Supply and fix modular socket , 6 Amp 2/3 pin combined 230 Volts

Supply and fix modular socket , 16 Amp 2/3 pin combined 230 Volts.

S & F LED Light fitting 34 watts 2x2 Ultra modern recess mounting luminaire suitable for ceiling complete with separate electronic driver & high brightness SMD LEDs, 34W LED 4000K lamp type. All as directed by Engr-in-Charge.

S& F LED Mirror light fitting fancy type with high out put diffuser 10 Watt ,220 volt,AC decorative type with driver including connecting up with three core flexible copper conductor cable suitable size all as directed by ebngr -in-Chaarge.

S & F LED Track light 38 watt with modern design,compact size with high power COB LED to provide focussed light. Track light where fixed are attached on a continious track rail which is electrically charged as compare to need routing electrical wiring to indviidual lifght position withtrack 2 Mtr accessories

S& F flexible LED strips(5 Mtr Length) with optimum brightness and uniformity of light for perfect cove light ing LED Flexi strip with controle divece ,adoptor including connecting up with three core flexible copper conductor cable suitable size all as directed by Engr -in-Chaarge.

S&FSingle pole and neutral enclosure with a two pin and earth plug and socket complete with one single pole MCB 20 Amps cap etc. as requiredand directd by Engr-in-charge.

Supply, install, testing and commissioning wall fan made ofsturdy Engineering plastic complete withall accessories , voltage 230V, 50 Hz,RPM 1200, Copper winding of sweep 400mm 3 blade, single phase, all as directed by Engr-in-Charge

S & F Exhaust fan steel body single phase AC 230Volt,230 mm sweep with blades,frame,shutters and louvers all as directed by Engr-in-Charge.

Taking down carefully refixing with supporting saddle or batternclip of existing electric cable /PVC conduit/LAN cable/Telaphone cable any rype and any size from wall, ceiling room inner side to complete all necessary arrangements including fittings and fixtures ,existing concealed /open from ceiling /wall and making good surface of the wall to existing match finishes all as directed by Engr-in-Charge.

S&F instant type water storage heater with shock resistant ABS outer body (Geyser) of capacity 3 ltr, , AC, electric, 230 volt, complete with efficient long life copper heating element 4.5 KW , 3 core lead, Plug top, safty valve, inluding electric and water connection using MS Iron suitable nut, bolts & washers and making good to disturbed surface complete all as specified and directed.

S & F CAT-6 cable to LAN connection all computers including taking out existing old all as directed by Engr-in- Charge

S&F sub main wiring with two runs PVC insulated unsheathed FRLS stranded copper conductor cable of size 4 Sqmm alongwith one run of PVC insulated unsheathed stranded copper conductor cable of size 4.0 sqmm as earth wire connected to earth dolly fixed on surface of wall/ceiling/in existing concealed conduits,including cutting chases and making good to walls, floors etc, complete all as specified and directed. Note :- Two run of 4.0sqmm copper conductor cable,one run of 4.0sqmm copper cable and one run of PVC conduit pipe shall be measured as one unit length.

Supply installation testing and commission of 28 port Gigabit smart managed PoE switch 24X10/100/1000 BASE -T PoE ports 4 x Gigabit RJ45/SFP combo ports advance L2 switiching and security features L2+ static routing optional "standard mofe" or " surveillance mode" management user interface 193 W PoE budget comprehensive security features to protect your network automatic configuration and auto MDI/MDIX yes10/100/1000BASE-T PoE ports 24combo 10/100/1000BASE-T ports 4 switch capacity 56 Gbps Max. packet forwading Rate 41.7 Mpps Store & frowarding forwading yes dimension 440mm x 250mm x 44mm weight 3.75 kg operation temperature -5-50 ˚C storage temperature -20-70˚ C operation humidity 0%-95% RH storage humidity 0% - 95% RH operating altitude 1500 meters maximum power consumption PoE on <br263.9W/100V<br>247.4 W/240 V <br>PoE off<br>30.6 W/100 V <br> 28.1 W/240 V standby power consumption 19.6 W/100V/16.6w/240v MTBF 469,262 hours maximum heat dissipation 900.36 BTU/hr(100V)<br>844.23 BTU/hr (240 V) power input 100-240VAC CPU speed 500MHz DRAM size DDR3 128MB Flash memory size 32MB Packet buffersize 4.1MBits MAC address table size 8K maximum PoE budget 193W PoE budget 193 W Max port per link aggregation group 8 link aggregation group per device 4 including connect the existing LAN cable from PoE switch to all copmuters to testing all as directed by Engr-in Charge. Note: for PoE Switch. :- (i) Entire Work for PoE Switch complete shall be got executed through the original manufacturer or their authorised agency only under the close supervision of their technical staff (ii) Contractor shall be liase with MTNL/BSNL/TATA network athority to provide separate new network connection up to user requirement for BISAG-N office. (iii) Contractor to submit PoE switch installation testing & completion certificate from OEM and user satisfication certificate before completion of the work.

S & F Single Loop networkable addressable type fire alarm control panel with min 8" TFT colour touch-screen user interface that is ergonomically engineered specifically for fire alarm control, connecting 125 addressable detector/devices any combination on digital protocol for less false alarm due to electrical interference. The panel shall be capable of flexible single or dual hardware loop configurations to optimise loop power and address capacity with Emergency Mode. The loop power shall be a maximum of 1000mA, to support up to 250 addresses, with up to 2000m of loop cable. Panel loop can be split into two separate loops and have the power intelligently distributed so that each loop can support the power it requires.The panel shall have reflective monitoring & self test facility to test sounder/strobes in working condition. Single panel should handle minimum 250/1000 detector devices any combination. The Panel networking should be Peer to Peer only upto 99 panels to handle 99,000 points .The panel shall have user configurable on screen site maps feature to avoid additional site plans. Shall have its own Battery charger. Shall have provision for interfacing with the Public Address System. The Panel Shall have 16 Zones with Individual LEd Indicators, expandable up to 80/240 LED Indicators. The Panel shall have 10,000 event log with dynamic filters for effective event diagnostics to quickly resolve site investigations. Panel should be IP30 raiting all as directed by Engr-in-Charge

S & F of addressable type min 8.4' inch TFT Touch screen repeater panel, with all required accessories which shall display date, time & description of alarm/trouble events that are displayed in the FACP with an inbuilt buzzer to indicate fault/fire alarm. The FACP panel shall support repeaters incorporating a full colour Graphical user Inter-face. The repeater shall be managed by user level password or a RFID card with unique identification of the user. The repeater shall provide a touch screen interface that provides features such as Maps, Zone identification, on screen help menus, allow for silencing and resetting of the alarm, testing, viewing of event logs confirming to standards and duly approved by EN54/VDS/ LPCB.

S & F of intelligent addressable type optical smoke + heat detector(multi) incorporate an LED, clearly visible from the outside, to provide in-dication of alarm or fault actuation.B24 with mounting base complete as required. Smoke detectors shall be capable of detecting visible combustion gases emanating from fires.Detectors shall employ the forward light-scatter principle, using optical components operating at a wavelength of 4.35 nm all as directed by Engr-in-Charge

S & F of intelligent addressable type optical smoke + heat detector(multi) incorporate an LED, clearly visible from the outside, to provide in-dication of alarm or fault actuation.B24 with mounting base complete as required. Smoke detectors shall be capable of detecting visible combustion gases emanating from fires.Detectors shall employ the forward light-scatter principle, using optical components operating at a wavelength of 4.35 nm. all as directed by Engr-in-Charge

S & F of intelligent addressable type optical smoke detector incorporate an LED, clearly visible from the outside, to provide in-dication of alarm or fault actuation.B24 with mounting base complete as required. Smoke detectors shall be capable of detecting visible combustion gases emanating from fires.Detectors shall employ the forward light-scatter principle, using optical components operating at a wavelength of 4.35 nm. all as directed by Engr-in-Charge

S & F of addressable manual call point to monitor and signal to the control and indicating equipment the status of a switch operated by a resettable/deforamable assembly be capable of operating by means of thumb pressure and not require a hammer. Incorporate a mechanism to interrupt the normal addressable loop scan to provide an alarm re-sponse within less than 3 seconds. Capable of being tested using a special 'key' without the need for depressing the unit. Provide an integral red LED to indicate activation. Call point to include the use of a yellow led to signal fault condition also to have integral isolato all as directed by Engr-in-Charge

S & F of Addressable type fault Isolator for isolating shorted, de-linked and loose circuits between two successive fault isolators with automatic resetting arrangement to be interconnecting to loop cable complete as required all as directed by Engr-in-Charge

S & F of Addressable monitor module, capable of monitoring NO contacts, Option to choose operation mode as supervision of 20Sec or activation immediatee to connect NO/NC contacts such as pressure switch, flow switches, fire pump contacts etc.Addressing shall be with user friendly rotary decimal switches complete as required in accordance with laid specification or upto the satisfaction of engineer in charge all as directed by Engr-in-Charge

S & F of Control input module used for monitoring two contacts and signals to the Fire Controller, status of monitored contacts and wiring to the contacts can monitor a single normally closed contact(for Flow switch, tamper switch, conventional gas detectors) all as directed by Engr-in-Charge

Supplying & Fixing in position GI Box suitable for installation of detectors on true Ceiling complete as required to do the job in all respect in accordance with laid specification or upto the satisfaction of engineer in charge.

Supplying, laying, testing and commissioning of 2x1.5 sq.mm 1.1KV grade copper conductor armored FIRE SURVIVAL cable with (EPR) Ethylene Propylene rubber insulation as per BS 7846:2009 & IEC-60502:2004 Part-1 (Armored), Retain circuit integrity as per BS 6387 C.W.Z (armored), BS-8491:2008, BS 8434-2: 2009 (armored), (Resistance to fire at 950º C for 3 hours), as per specifications in cable trays, clamped including steel conduit pipes anchor fasteners to wall with suitable clamps, saddles fixing bolts, complete in all respect and as per specifications.all as directed by Engr-in-Charge

Supply, installation,testing and commissioning of EXIT light, self contained 6W luminaire complete with flush mounting frame ,sign label,fluorescent tube and battery and with label EXIT/RIGHT/LEFT/UP/DOWN as requiredall as directed by Engr-in-Charge. Note: Ser No 60 to 72 :- (i) Entire Work for complete shall be got executed through the original manufacturer or their authorised agency only under the close supervision of their technical staff (ii) Contractor to submit, installation testing & completion certificate from OEM and user satisfication certificate before completion of the work.

Friends fire Engineers