Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹4.2 LAccepted-Finance | L1 | Accepted-Finance L1 Bidder | |
| 2 | L2₹4.3 L+₹4,247.06 (1.00%)Rejected-Finance | L2 | Rejected-Finance Not L1 Bidder | |
| 3 | L3₹4.3 L+₹8,494.12 (2.00%)Rejected-Finance | L3 | Rejected-Finance Not L1 Bidder | |
| 4 | L3₹4.3 L+₹8,494.12 (2.00%)Rejected-Finance | L3 | Rejected-Finance Not L1 Bidder | |
| 5 | L4₹4.4 L+₹12,741.18 (3.00%)Rejected-Finance | L4 | Rejected-Finance Not L1 Bidder |
Tender Value
₹4.2 L
EMD Value
₹8,494
Closing Date
29 Aug 2026, 12:30 pmClosed
Assistant Engineer, PWDte.Dum Dum Sub Division
166/10, B.T.Road, Ground Floor, Dunlop, Kolkata-700108
Civil work releated to SITC of 01 no 13 passengers new lift in G plus 2 Storied Annex building at North Calcutta Polytechnic under Kolkata North Division PWdte during the year 2025_26
2026_WBPWD_5018744_1
WBPWD AE DDSD NIeT-05/2026-2027
Open Tender
CIVIL WORKS
Percentage
45 days
North Calcutta Polytechnic
Please refer Tender documents.
5 documents required · 5 mandatory
₹8,494
Yes
11 Sept 2026
14 Aug 2026
31 Aug 2026
20 Aug 2026
29 Aug 2026
20 Aug 2026
This is a percentage-rate BOQ. The schedule below shows estimated quantities and rates. Bidders quote a single percentage above or below the total estimated cost.
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1 | Labour for Chipping of concrete surface before taking up
Plastering work. | 18.39 | m2 | 21 | ₹386.19 |
| 2 | Applying epoxy based reactive joining agent for joining the old concrete with fresh concrete to be applied within manufacturer's specified time as per manufacturers specification. (0.4 Kg / m² of concrete surface). | 18.39 | m2 | 309 | ₹5,682.51 |
| 3 | Ordinary Cement concrete (mix 1:1.5:3) with graded stone chips (20 mm nominal size) excluding shuttering and reinforcement if any, in ground floor as per relevant IS codes.
(i) Pakur Variety | 1.19 | m2 | 5,786.66 | ₹6,886.13 |
| 4 | M.S. structural works in columns, beams etc. with simple rolled structural members (e.g. joists, angle, channel sections conforming to IS: 226, IS: 808 & SP (6)- 1964 connected to one another with bracket, gussets, cleats as per design, direction of Engineer-incharge
complete including cutting to requisite shape and length, fabrication with necessary bolting, metal arc welding conforming to IS: 816- 1969 & IS: 1995 using electrodes of approved make and brand conforming to IS:814- 2004, haulage, hoisting and erection all complete. The rate includes the cost of rolled steel section, consumables such as electrodes, gas and hire charge of all tools and plants and labour required for the work including all incidental chages such as electricity charges, labour insurance charges etc. I) For structural members of specified sections weighing less than 22.5 Kg./m | 1.08 | MT | 72,603 | ₹78,411.24 |
| 5 | Hire and labour charges for shuttering with centering and necessary staging upto 4 m using approved stout props and thick hard wood planks of approved
thickness with required bracing for concrete slabs, beams and columns, lintels curved or straight including fitting, fixing and striking out after
completion of works (upto roof of ground floor) (e) Extra for staging beyond 4 m in any floor (Mode of measurement: area in plan x mean height of staging upto soffit of shuttering above initial 4 m) | 66.96 | cum | 61 | ₹4,084.56 |
| 6 | (a) Priming one coat on steel or other metal surface with synthetic oil bound primer of approved quality including smoothening surfaces by sand papering etc. | 71.82 | Sqm | 29 | ₹2,082.78 |
| 7 | A) Painting with best quality synthetic enamel paint of approved make and brand including smoothening surface by sand papering etc. including using of approved putty etc. on the surface, if necessary : (b) On steel or other metal surface :
With super gloss (hi-gloss) - (iv) Two coats (with any shade except white) | 71.82 | Sqm | 79 | ₹5,673.78 |
| 8 | Providing and fixing exterior quality Aluminium Composite Panel (ACP)
wall cladding on existing Al. /MS frame work with GI brackets, ACP fixed
on the existing frame work by folding the edges of ACP panel (Engraving
the rear surface of ACP sheet) with CP angles, cleats and strainless Steel
screws forming groves at the periphery of ACP panel. Such grooves filled
with foam and silicon sealant etc. complete with all materials (but
including the cost of silicon sealant), labour, scaffolding and all other incidental charges complete in all respect as per specification and direction of Engineer-in-charge. (Mode of payment is on finished surface area of ACP) b) 4mm thick (0.50mm Al.+3.0mm LDPE +0.50mm Al. PVDF coating) | 87.96 | sqm | 2,878 | ₹2,53,148.88 |
| 100 | ADD : GST - 18% | 1 | no. | - | - |
| 200 | ADD : WEST BENGAL LABOUR WELFARE CESS = 1% | 1 | no. | - | - |
stage.html
html • 0.14 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.90 MB
2911_Form.pdf
Tender Documents • 0.54 MB
AnnexureXnew.pdf
Additional Documents • 0.01 MB
BOQ_5090013.xls
BOQ • 0.32 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .