SPL REPAIR TO BLDG NO P 7 F AND G AT MES IB AT AEC TRG COLLEGE AND CENTRE PACHMARHI.

Amount

Dismantling of Asbestos cement (corrugated, semicorrugated, etc.) sheets in roof coverings complete all as specified and directed.

S&F pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed.

S&F pre- painted galvalume aluminum zinc coating GI based plain steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in ridges, roof covering/ cladding to wall, fixed with self tapping screws as specified and directed.

Dismantling timber scantlings 40 sq.cm and over in section, in any position complete all as specified and directed.

S&F mild steel rolled section conforming to Fe-290 (Gde E-165), as in main and cross beams, hip and jack rafters, purlins where connected to common rafters and running rails and guides for sliding doors; fixed with angle cleats or other connecting plates etc. complete all as specified and directed.

M&L applying two coats of synthetic enamel paint over a coat of red oxide or zinc chromate primer including preparation of new steel or iron surfaces exc 10 cm width or girth, complete all as specified and directed.

Dismantling false ceiling any description or in any thickness, including GI frame work complete all as directed by Engr-in-Charge.

S&F Gl frame work for seamless ceiling, size of grid 605 x 605mm, comprising of Gl perimeter channnel 0.55 mm thick with two unequal flanges of 20 and 30 mm and web of 27 mm fixed to surrounding wall using nylon sleeves and screws at 450 mm centre to centre/ intermediate channel 0.9 mm thick having two equal flanges of 15 mm each and web of 45 mm suspended from soffit at approx 900 mm centre to centre with Gl cleat and steel expansion fasteners with and including ceiling section (not exc 1.2 m length) of 0.55 mm thickness having kurled web of 50 mm and flange of 26 mm each with lips of 10.5 mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457 mm centre to centre and hangers 6 mm dia. G.I. (upto 1200mm length) adjusting level fixed to roof slabs by means of ceilling cleats made out of G.I. flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5mm dia. 40mm long, with and including 4mm thick non asbestos fibre cement building boards fixed or laid/ inserted to GI framework with screwsas per manufacturere instruction complete all as specified and directed. Note : Cost of making frame work and board (cut out) for fixing light fitting grill diffuser etc shall be deemed included in the quoted rate.

Demolition of cement concrete (unreinforced) in floors and pavings not exc 15 cms thickness (below or above ground level) etc including removal of demolished material from work site all as directed.

M&L for 75mm thick PCC (1:3:6), type C-2 using 40mm graded stone aggregate as in plinth protection/ path, surface finished even & smooth without using extra cement, complete all as specified and directed.

M&L 25mm thick cement concrete 1:2:4, type B-0 (using 12.5mm graded stone aggregate) as in floor finishes complete all as specified and directed.

M&L 20-25mm thick machine cut kota stone slab (table rubbed and polished) as in flooring laid over and including 15 mm thick screed bed or bedding layer in CM (1:4), set and jointed with grey cement slurry mixed with pigment to match the shade of slab including cutting, rubbing, grinding and mirror polishing upto desired satisfaction of Engr In Charge complete all as specfied and directed.

M&L 20-25mm thick machine cut kota stone slab (table rubbed and polished) as in skirting and including 10 mm thick rendering in CM (1:4) set and jointed with grey cement slurry mixed with pigment to match the shade of slab including cutting, rubbing, grinding and mirror polishing upto desired satisfaction of Engr In Charge complete all as specfied and directed.

Demolition of brick work and stone/ boulder masonary built in cement mortar and lime mortar complete all as specfied and directed.

M&L for modular brick work with sub class `B` bricks, straight or curved on plan exc 6m mean radius, built in cement mortar( 1:4) complete all as specified and directed.

Taking down cement plaster on brick wall etc. including racking out joints, hacking for key, scrubbing down with water, etc. complete all as specfied and directed.

M&L rendering 15mm thick on brick wall or concrete surface in cement mortar 1:6 finished fair and even complete all as specfied and directed.

M&L rendering 15mm thick on brick wall or concrete surface consisting two layers, under layer of 10mm thick in CM (1:6) & top layer of 5mm thick in cement mortar 1:4 mixed with water proofing compound, finished even and smooth without using extra cement complete all as specfied and directed. (Note:- Water proofing compound shall be measured and paid seperately.)

Supply only Integral water proofing compound

M&L for preparation of new plaster surface of wall and applying two coat of cement base paint white or coloured over a coat of white wash complete all as specfied and directed.

M&L for preparation of old cement based surfaces of walls and applying one coat of cement based paint complete all as specified and directed.

M&L for preparation of new plaster surface of wall and applying two coat of distemper oil emulsion white or over a coat of white wash complete all as specfied and directed.

M&L for preparation of old distempered surface of walls and applying one coat of distemper oil emulsion white complete all as specified and directed.

M&L for preparation of new plastered wall surfaces and applying two coat of white washing complete all as specified and directed.

Taking down chowkat with shutter exc 1.5 Sqm but n.exc 4 Sqm each (without taking off shutters from the frames) complete all as specfied and directed.

S&F 2nd class hard wood plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered,put together with glue pinned at joints complete all as specfied and directed.

S&F 35mm thick factory made plain framed, panelled door shutters (two panel) of IInd class hard wood rail and styles with lock rail and panel of 9 mm BWP commercial ply. The size of rail and style as per IS-1003 (Part-I), kiln seasoned and chemically pressure treated complete all as specified.

S&F 30mm thick factory made second class hard wood glazed and skelton door shutter open rebated and prepared to receive glass or gauge etc divided into square with plain chamfered or rounded, mitred and rebated sash bars any number complete all as specified and as directed. Note :- Size of member of shutters as specified in SSR Part-I (2009) section 8 clause 8.20 (a).

M&L applying two coats of synthetic enamel paint over a coat of pink primer to new wooden surfaces exc 10 cm width or girth, including preparation of surfaces, complete all as specified and directed.

Taking down chowkat with shutters n.exc 1.5 sqm each (without taking off shutters from the frames).

S&F steel windows with side hung shutters including projecting type hinges with steel handles,steel peg stays complete with glazing bars dovetailed or welded,complete all as specified and directed.

M&L preparing surface of wood and wood based materials, steel and iron work, new or old, of any description and girth and treating ends of post, back of chowkats etc, not otherwise described and treated with tar or coal tar or black paint complete all as specified and directed.

M & L sheet glass, ordinary quality 3mm thick and glazing with oil putty in squares n.exc 0.5 sqm in each pane complete all as specified.

S&F Butt hinges 125mm long, medium weight, cold rolled mild steel, and fixed complete all as specified and directed.

S&F IInd class hard wood small fittings such as brackets of any type, latch and hinge block, shaped door and window stops and the like,articles n.exc 200 cucm each complete all as specified and directed.

M&L Alluminium alloy anodised,sliding door bolt 250mm long, with hasp and staple (bolt type) and fixing clips of sheet,cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy and fixed complete all as specified and directed.

M&L 200mm long aluminium, anodised, barrel tower bolts, of extruded section and fixed complete all as specified and directed.

S&F for 125mm extruded aluminium alloy handles fabricated type, anodised complete all as specified and directed.

S&F 300 mm, mild steel ordinary rat rail rod pattern springs including roller plate complete all as specified and directed.

S&F galvanised mild steel wire cloth, 0.56mm nominal dia of wire and average width of aperture 1.00mm and fixed with tinned tacks or galvanesed wire stapels complete all as specifed and directed.

S&F solid PVC door frame of size 50mm X 47mm made out of 5mm plain colour PVC sheet reinforced with MS square tubes, as per specifications and drawing complete all as specifed and directed.

S&F factory made solid panel PVC door shutter 30mm thick (Style) consisting of frame made out of MS tubes for top, bottom and side rails, MS frame shall be covered with heat molded plain colour PVC “C” channel having a PVC sheet strip of 20 mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail lock rail & bottom rail on either side and as gap insert for top rail and bottom rail paneling of plain colour PVC sheet to be fixed in the MS frame welded /sealed to the stiles and rails with suitable PVC sheet beading and jointed together with solvent cement and fixing in the frame at site complete all as specified and directed.

Dismantling floor, hearth or wall tilling incl cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and as directed.

M&L 75mm thick PCC 1:4:8 type D2 using 40 mm graded aggregate as in sub base complete all as specified and directed.

M&L 25mm th PCC 1:2:4 type B-0 using 12.5mm graded aggregate as in flooring, finished fair and even complete all as specified and directed.

M&L non-skid white ceremic tiles 7 to 8 mm thick (Square/ rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. set & jointed in neat cement slurry and pointed in white or coloured cement to match coloured tiles laid over and including 15 mm thick screed bed or bedding layer in CM (1:4) complete all as specfied and directed.

M&L glazed ceremic tiles in vertical surfaces 350x250x7mm or 450x350x7mm thick, set & jointed in neat cement slurry and pointed in white or coloured cement to match tiles laid over and including 10 mm thick rendering in CM (1:4) complete all as specfied and directed.

S&F in repair vitreous china squatting pan of “Orissa” pattern of size 580 mmx 440mm white with integral foot rest (excluding flushing cistern and flush pipe) including connection to trap and to flushing pipe, anti syphonage pipe etc and making good to floor complete all as specified and as directed.

S&F in repairs 10 ltrs capacity (PVC), valve less, syphonic action type, fluhsing cistern, low level, white, with inlet, ball valve, float and handle including brackets and 32 mm flush pipe, complete all as specified and directed.

S&F in repair centre hole vitreous china, white, padestal suitable for wash hand basin, flat back size 550x400mm complete all as specified and directed.

Supply only PVC connection 15x450mm size all as specified and directed.

S&F in repair 20mm dia brass chromium plated tubular towel rails, D type, 60 cm long between flanges,complete all as specified and directed.

Cutting chases, pinning in, for concealed water tubing on brick walls, making good to facing where required and pointing in cement mortar 1:3, not exc 10 cm girth complete all as specified and directed.

Taking up or down steel water tubing (GI Pipe) and connections of 15 mm bore complete all as specified and as directed.

S&F medium grade galvanised steel tubing with all fittings fixed to wall or laid in floors for 15 mm bore GI tubing complete all as specified and directed..

Taking up or down steel water tubing (GI Pipe) and connections of 20 mm bore complete all as specified and as directed

S&F medium grade galvanised steel tubing with all fittings fixed to wall or laid in floors for 20 mm bore GI tubing complete all as specified and as directed.

S&F rotational moulded polyethylene water storage tank, double layer construction, ISI mark (cylindrical vertical with closed top) hoisted and fixed in position with and including 20 mm dia GI pipe medium grade washout pipe 450 mm long with plug and 20 mm dia GI pipe medium grade overflow pipe 600 mm long with fittings, of 500 ltrs capacity of tank and including dismantling of old tank complete all as specified and as directed.

S&F ball brass valve, with polythelene float and fly nut complete screwed down for iron pipe of 20 mm dia complete all as specified and as directed

S&F in repair gun metal globe or gate valve with iron wheel screwed both ends for iron pipe of 20 mm dia complete all as specified and as directed

S&F in repair gun metal globe or gate valve with iron wheel screwed both ends for iron pipe of 15 mm dia complete all as specified and as directed

S&F in repair 15 mm dia bib tap cast copper alloy, chromium plated, with crutch or butterfly handle, screwed down for iron pipe or for brass ferrulecomplete all as specified and as directed

S&F in repair stop valve, cast copper alloy, fancy type,chromium plated with long shank and cup (Concealed type), screwed down both ends for high pressure, as per ISI suitable for 15mm dia iron pipe complete all as specified and as directed

S&F in repair Swivel shower of PTMT any colour for fixing with 15mm pipe (Min wt 40 gms) incl shower arm 15mm size, 195mm long with bend of 45 degree with flange of PTMT any colour (min wt 40 gms) complete all as specified and as directed

S&F in repairs cast iron nahani trap with grating 75mm dia including jointing to waste pipe fixed in cement concrete type B-1 (1:2:4) complete all as specified and directed.

S&F CI 'P' or 'S' trap of 75mm size complete all as specified and as directed.

S&F in repairs CI branch pieces single 75mm dia (equal or unequal), ordinary or inverted or with parallel branches, with access door, ccomplete all as specified and as directed

S & F in repairs CI bends 75mm dia (any radius), diminishing pieces or tapers( larger bore measured), with access door complete all as specified and as directed.

S&F in repairs sand cast iron soil, waste and vent pipe, 75mm bore, in any length with or without ear with cement joint fixed to walls complete all as specified and as directed

S&F in repair 75 mm dia cast iron cowls complete all as specified and as directed

S&F in repairs 75 mm bore stack clamps out of 50 mm by 5 mm flat iron and 16mm dia round iron stays, including bolts and nuts and securing ends of stays to wall or roof complete all as specified and as directed

Excavation in trenches n.exc 1.5m deep & n.exc 1.5m wide; for foundation etc or for shafts, wells, cess pits, manholes, pier holes etc and n. exc 10 sqm on plan, in hard/dense soil and getting out complete all as specified & directed.

Demolition and breaking up drain pipe (SGSW, AC or RCC) of internal dia 150mm set in cement mortar complete all as specified and directed.

M&L PCC 1:4:8 type D-2 (using 40 mm graded stone aggregate) as in concrete bed to drain pipes including packing under and haunching against the sides of pipe after they are laid and tested for 150 mm dia SWG pipe complete all as specified & directed.

M&L Salt Glazed Stone Ware drain pipe 150 mm bore grade 'A' laid in trenches and jointed and testing complete all as specified & directed.

Returning, filling in including spreading leveling, watering and well ramming in layers not exceed 25 cm, complete all as specified and directed.

Removing excavated material n exc 50 m and depositing where directed at a level not exc 1.5 mtr above the starting point.

Demolition of cement concrete (reinforcement) in ground floor on paving n exc 15 CM thickness (below or above ground level) complete all as directed by Engr-in-Charge

M&L for precast reinforced cement concrete 1:2:4 type B1 using 20mm graded stone aggregate for cover slabs of manholes, cover slab set in CM 1:4 side portion only with plain surfaces including necessary form work (reinforcement to be measured and paid separately ) complete all as specified and as directed by Engr-in-Charge.

S&F TMT bars 10mm dia and over, cut to length, bent to shape required, including binding with mild steel wire (annealed) not less than 0.9mm dia conforming to IS-432 complete all as specified and as directed by Engr-in-Charge..

Cutting in to existing manholes for connecting new drains, making good to pipe & rendering cutting out existing benching for and forming branch channel in cement concrete1:2:4 type B-1 smooth finished and reforming benching as required for 110 mm bore drain pipe complete all as specified and as directed.

Demolition of cement concrete (unreinforced) in floors and pavings not exc 15 cms thickness (below or above ground level) etc including removal of demolished material from work site all as directed.

M&L PCC type D2, 1:4:8 (using 40 mm graded stone aggregate) as in filling and mass concrete, complete all as specified and directed.

S& F sand filling under floor or in floor or paving, laid in including watering and consolidation true surface for laying paver block complete.

M &L for Machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658-20s06 of 50 to 60mm thickness, Grade M-35 glossy finish with red cement and pigment complete all as specified and as directed.

M&L for cement concrate 1:2:4 type B1 using 20mm graded aggregate for coping and other similar work complete all as specified and as directed.

Taking down carefully existing copper/aluminium point wiring (light/fan/sockets) complete with all accessories such as switches sockets ceiling rose, wall bracket etc and removing dismantled material and making good disturbed surface of walls/floors etc matching with existing surface etc complete all as specified and directed .

M & L for point wiring for one light / fan point controlled by one switch with 1.5 Sqmm (nominal area) PVC insulated, unsheathed multi strand copper conductor cable FR-LSH in and including concealed PVC conduit 20 mm dia heavy duty ISI marked, steel terminal sunken boxes and 3 mm thick phenolic laminated sheet top cover for sunken boxes flush to surface for one light point/fan point, controlled by one switch on the same board with other switch or independent including PVC insulated unsheathed 1.5 Sqmm copper conductor cable FR-LSH connected to common earth dolly complete including cutting, chasing the surface and then making good the same in CM (1:3) complete all as specified and directed by Engineer-in-charge.(Note :- Switches, sockets etc shall be measured and paid for separately under appropriate items of Sch 'A' ).

All as per item No 89.00 but for socket 5 Pin, 5 Amp 230 Volt on same board.

All as per item No 89.00 but for one socket point outlet 3 Pin, 5 Amp 230 Volt on independent board.

All as per srl item No. 89.00 (here-in-before) but for 15 Amp socket out let by using 2.5 Sqmm PVC insulated unsheathed copper conductor cable FR-LSH multi strand on independent board including provn of 2.5 Sqmm unsheathed, multi stranded copper conductor cable FR-LSH continues as earth wire connected to earth dolly etc complete all as specified and directed by Engineer-in-Charge.

S& F semi modular type switch piano flush type, 6 Amp 240 Volt, AC (ISI Marked) one way etc complete all as specified and directed by Engineer-in-Charge. Make : Indo Asian/Havells/Legrand/Anchor.

S&F semi modular one switch & one socket outlet 5 Pin 5 Amp 230 volts AC ncluding decorative frame cover etc complete all as specified. Note:- Switch and socket shall be of same make. Make : switch and socket Indo Asian/Havells/Legrand/Anchor.

S&F semi modular one switch and one socket outlet multipurpose 3 Pin ,5 Amp and 6 Pin ,15 Amp 230 volts AC ncluding decorative frame cover etc complete all as specified and directed . Note:- Switch and socket shall be of same make. Make : switch and socket- Make : Indo Asian/Havells/Legrand/Anchor.

S&F semi modular Ceiling fan regulator electronic step type of suitable wattage, 230V suitable for 1200/1400 mm ceiling fan etc complete all as specified and directed . Make : Indo Asian/Havells/Legrand/Anchor.

S&F ceiling rose surface bakelite 65mm x 50mm, 2 to 3 terminals with back plate etc complete all as specified and directed . Make : Indo Asian/Havells/Legrand/Anchor.

S&F Lamp holder of PVC / Polycarbonate type surface including 9W LED etc complete all as specified and directed by Engineer-in-Charge. Make of lamp holder: Indo Asian/Havells/Legrand/Anchor.,make of LED : CG /bajaj/Havells/wipro CT PT N95001

Supply and fixing double door sheet metal enclosure made out of CRCA mild steel sheet concealed surface mounting SPN, 8 way, 230 Volt, with 200 Amp rated bus bar suitable for fixing MCBs, isolators etc including taking down old complete all as specified and directed.Model - Ekinoxe Cat part No.607711, Make- Legrand / Schnider/L&T/Havells

S&F MCB SPN 32 Amps c curves MCB repturing capacity 10 KA etc complete all as specified and directed . Make :Legrand Cat Part No 408617 or equivalent in L&T/Schnider/Havells.

S&F MCB 5 Amp to 30 Amp SP capacities 'C' series 10KA rupturing capacaity complete all as specified and directed. Make :Legrand/L&T/Schnider/Havells.

Supply and lay Cable XLPE insulated screened PVC bedded galvanised steel strip or wire armoured electric power cable (Heavy duty) 1100 volts grade with stranded alumnium conductor of size 10 Sqmm 2 core complete all as specified and directed.

M & L for earthing with galvanized steel plate electrode 600 x 600 mm x 6 mm size directly burred in ground vertically earth pit not less than 2.25 meter deep below normal ground level with top edge of the earth plate not less than 1.5 m below normal ground level surrounded with coal dust and common salt filling in alternative layers of 15 cm thick each connected to and including GI earth wire 4 mm dia by means of GI nuts, bolts, check nuts & washers etc connecting to earthing test point, main switch board and including 15 mm dia GI pipe light grade for protection of earth lead from earth plate upto 5 mtr and 20 mm dia GI pipe medium grade connected with funnel having wire mess for watering purpose including necessary excavation and earth work, PCC (1:2:4) type B-1 (using stone aggregates) for earthing pit, 10mm thick cast iron cover with angle iron frame all as specified and shown in electrical plate No 3 of SSR Part-I and testing on completion complete all as specified and directed.

S&F blanking plate etc complete all as specified and directed.

S/F wall mounted LED fitting 1X18/20/22 watt, 6000K, 4 ft complete with following Accesories:- (i) LED batten suitable for fitting of LED tube rod single side/ double side connection with G13 Lamp Holders. (ii) LED tube rod 18/20/22 W single side /Double side connection to be fixed in above fitting complete all as specified and directed Note:- The above item should be enviroment friendly, energy efficient complete with all light fittings connection all as specified and directed.

S&F LED light fitting, 1X25 watts complete with toughened glass IP66 incl making provn of suitable size GI bracket (01 No) and MS clamps (02 Nos) fixed to wall/ column including electrical connection providing 1.5 mtr long twin core round copper conductor cable of suitable size incl taking out old unsv complete all as specified and directed. Make- Havells Cat Part No- ENDURAPEARLSL25WLED75SASYTOPCMP or equivalent in Bajaj/ Philips.

S&F mini mirror LED light indoor domestic mirror light luminarire 1X5/7/9 Watt including connections with with twin core wire of suitable size complete all as specified and directed .make Crompton cat part no LCL-07-CDL or equivalent in Bajaj/ Philips/Havells.

SUBIR KUMAR ROY

GHASI RAM SAHU

DEEPAK JAISWAL