WELCOME MAINT WORK FOR ACCN AND CERTAIN MAINT WORK IN THE AREA OF AGE B/R-III UNDER GE (W) JABALPUR

Amount

Demolition of concrete of any description and in any position including removal of debries/waste material outside MD land complete all as specified and as directed.

Dismantaling floor hearth or wall tiling/china moisac including cement mortar bedding (but not backing ) , removing serviceable tiles to store and rubbish off the premises including removal of debries/waste material outside MD land complete all as specified and as directed.

Demolition of brick or stone/boulder masonry built in cement mortar including all quoins. arches, pillars etc excluding ashlar facings complete all as specified and as directed.

Taking down cement plaster / terrazzo of any description thickness including raking out joints hacking for key scrubbing down with water including removal of debries /waste material outside MD land complete all as specified and as directed.

M&L for 25 mm thick PCC Type B-0 1:2:4 (Using 12.50 mm graded stone aggregate ) to receive rough finish as in floor complete all as specified and as directed.

M&L for 15 mm thick rendering on brick or concrete surfaces in CM (1:3) in two layers mixed with water proofing compound @ 2% by weight of cement in top 5mm thick, finishing the surfaces with even and smooth with using extra cement complete all as specified and as directed. (Note:WPC shall be measured and paid separately)

M&L for Bitumen blown any grade , applied hot, two coats to concrete surfaces at the rate of 1.5Kg Sqm per coat. Including polythene film, black , 50 micron laid in floors complete all as specified and as directed.

M&L for PCC (1;7:12) Type F2 using 40mm graded stone aggregate laid complete all as specified and as directed.

M&L for PCC 1:2:4 type B-0 using 12.5 mm graded stone aggregate as in roof kerbs /covet fillet complete all as specified and as directed.

S&F for 40mm bore GI tubing medium grade fixed to wall and ceiling or laying in floor as sunken spout complete all as specified and as directed.

M&L for Non skid ceramic coloured tiles 7 to 8 mm thick (Square or rectangular) area of Each tile exc 0.18 Sqm but not exceeding 0.36 Sqm, in floor etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles laid over and including 15mm thick screed bed in cement mortar 1:4 for laying floor finishes complete all as specified and as directed.

M&L for Non skid ceramic coloured tiles 7 to 8 mm thick (Square or rectangular) area of Each tile exc 0.18 Sqm but not exceeding 0.36 Sqm, as in skirting ,dados in vertical surfaces etc and including 10mm thick rendering in cement mortar 1:4 complete all as specified and as directed.

M&L for glazed ceramic coloured tiles of size 450 x 300 x 6 to 7 mm,450x350 or 350x250 6 to 7mm thick on vertical surface such as skirting/dado etc. ,set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tile with & including rendering 10 mm thick rendering in cement mortar 1:4 finished rough to fix tiles complete all as specified and as directed.

M&L for Non skid coloured ceramic tiles 7 to 8mm thick square/ rectangular area of Each tile exceeding 0.11 Sqm but not exceeding 0.18 Sqm as in skirting etc set and jointed in neat cement slurry and pointed in white cement with pigment to match, laid over and including 15 mm thick screed bed or beddding layer in cement mortar 1:4 complete all as specified and as directed.

M&L for Non skid coloured ceramic tiles 7 to 8mm thick square/ rectangular area of Each tile exceeding 0.11 Sqm but not exceeding 0.18 Sqm as in skirting etc set and jointed in neat cement slurry and pointed in white cement with pigment to match, laid over and including 10mm thick rendering in CM 1:4 complete all as specified and as directed.

M&L for vitrified ceremic tiles 7 to 8mm thick, in LIGHT, (Square/rectangular) polished, area of Each tile not exceeding 0.36 Sqm, in floors etc. set & jointed in neat cement slurry and pointed in coloured cement to match coloured tiles laid over and including 15 mm thick screed bed or bedding layer in CM (1:4) complete all as specified and as directed.

M&L for Vitriefied ceramic tiles 7 to 8mm thick LIGHT SHADE(square/rectangular) polished area of Each tiles not exceeding 0.36 Sqm as in vertical surfaces such as dados/skirting etc set and jointed in neat cement slury and in coloured cement to match Coloured on including 10mm thick rendering in CM 1:4 complete all as specified and as directed.

M&L for Brick work with sub class ‘B’ brick, old size straight or curved on plan exc 6m mean radiusbuilt in cement mortar 1:6 complete all as specified and as directed.

M&L for Brick work with sub class ‘B’ brick, old size straight or curved on plan to any radius in half brick thick walls built in CM 1:4 complete all as specified and as directed. .

Taking down chowkhats or frames with shutter (without taking off shutter from the frame) of area not exc 1.5 Sqm Each complete all as specified and as directed.

Taking down chowkhats or frames with shutter (without taking off shutter from the frame) area exc 1.5 Sqm but n-exc 4 Sqm Each complete all as specified and as directed.

Taking down Shutters of any description area n.exc 1 Sqm Each complete all as specified and as directed.

Taking down Shutters of any description area exc 1 Sqm but n exc 2.0 Sqm Each complete all as specified and as directed.

Refixing of shutters including taking down easening and adjusting and also refixing hardware as required including renewal of unserviceable screws etc. of any description n exc 1.0 Sqm Each, in same opening complete all as specified and as directed.

S&F for pressed steel door frame 105x60 mm with one or more rebated incl necessary fixing lugs hings, lock strick , etc complete all as specified and as directed.

S &F for Pressed steel frames size 125x 60 mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc complete all as specified and as directed.

S&F for framed work as in doors or gates of angle or other section with gusset plates ,rails,braces etc complete drilled for fixing of steel gate sheeting or other covering,doors ,etc to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering ,runing rails and guides ) and hanging also fastning and fixing confirming to FE-290 ( Gde E-165) complete all as specified and as directed.

M&L for PCC 1:3:6 type C0 using 12.5mm graded stone aggregate as in filling of pressed steel door frame complete all as specified and as directed.

S&F for 40 mm thick flush shutters solid core construction with block board core and plywood face panels, commercial type on both sides decorative face veneer with lipping/frame to match supplied and fitted to chowkats complete all as specified and as directed.

S&F for 35 mm thick factory made plain, framed, panelled shutters (Two panels) with lock rail and panel of 9 mm thick BWP commercial ply or 12 mm thick veneered particle board with commercial veneering on both faces and size of the members of shutter are as per IS – 1003 (Part – I) made of kiln seasoned & chemically pressure treated 2nd class hardwood rail and style complete all as specified and as directed.

S & F 35 mm thick 2nd class hardwood glazed and skeleton shutters, open rebated and prepared to receive glass, gauze etc (without sash bars) edges of framing plain chamfered or rounded fitted with cut and mitred beads for securing glass etc size of members of shutters as specified in SSR Part -I,section 8,clause 8.24 (a) complete all as specified and as directed.fitted to chowkhats for doors etc complete all as specified and as directed.

S&F, Aluminium anodised sections for doors/windows/ventilators with one or more rebates including joining cleat for fixing etc complete with frames, shutters and grills of size directed by Engineer-in-charge including handles, tower bolts, grills, etc complete all as specified and as directed. Note:- Floor door spring, sheet glass, wire cloth, lock, etc shall be measured and paid seperately.

M & L for Anodised aluminium door shutters, aluminium section weighing 0.55 kg/ m including necessary joining cleats,glazing clips, ruber neoprene packing,handles 2 Nos in each door, hinges,anodised aluminum snap beading screws etc complete all as specified and as directed.

M & L for Anodised aluminium window and ventilator shutters, fixed type without sash bar, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws etc complete all as specified and as directed.

M & L for Anodised aluminium window and ventilator shutters, side hung type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 no.). hinges type B-21 100mm long (2 no.) suitable handle (1no.) complete all as specified and as directed.

S&F, for Powder coated aluminium (minimum thickness of powder coating 50 micron) for shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber/neoprene gasket required (Fittings shall be paid for separately) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws all complete as per architectural drawings and as directed.

S&F for PVC door frame size 50mm x 47mm made out of 5mm single side prelam PVC Sheet used instead of Plain colour PVC sheet & edges will be painted to match with prelam sheet reinforced with MS tube complete all as specified and as directed.

S&F for 28 to 30mm thick (stile:) Factory Made Solid PVC Moulded Door Shutters with particle board core , with 2,4 or 6 raised panel design with 2mm thick Moulded PVC Sheet on the front Face & 2mm Plan colour PVC sheet on back face, supplying & fixing in frame at site as per specification & drawing complete all as specified and as directed.

S&F, for 150mm long aluminium anodised, barrel tower bolts of extruded section and fixed complete all as specified and as directed.

S&F, for 300mm long aluminium alloy, anodised, sliding door bolt with hasp and staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy and fixed complete all as specified and as directed.

S&F, for 100mm butt hinges extruded aluminium alloy with galvanised mild steel hinge pin,Type-B-21 complete all as specified and as directed.

S&F for stainless steel hydrolic soft close auto hinges ze zero degree incl necessery fittings complete all as specified and as directed.

S&F for 150mm long extruded aluminium alloy handles, fabricated type, anodised complete all as specified and as directed.

S&F for 75mm long floor door stopper of aluminium alloy body and tongue with hard drawn steel spring complete all as specified and as directed.

S&F door closer hydraulically regulated designation No-2 universal type of aluminium body fixed to door frames with screws or by welding complete for door shutters of 850 to 1000mm in width complete all as specified and as directed.

S&F stainless steel wire cloth 0.56 mm nominal dia of wire and average width of aperture 1.18 mm and fixed with stainless steel wire staple/ wooden beads complete all as specified and as directed.

S&F in repair 18/19 mm thick water proof block board of exterior grade Gde-I fixed with screws as kitchen, cup board box and shutters & shelves etc complete all as specified and as directed.

S&F in repair 18 mm thick PVC sheet one side prelaminated of approved texture as in Kitchen cabinet. (withshelves and partitions) including necessary fitting & fixture as per manucture's instructions complete all as specified and as directed.

S&F for 150mm long Handles of stainless steel fancy type inclduding all connection fitting as complete all as specified and as directed.

S&F for Europa cupboard locks complete all as specified and as directed.

S&F for 3mm thick Sheet glass,ordinary quality and glazing with oil putty in square n exc 0.5 sq. m in Each pane complete all as specified and as directed.

S&F for 5.5 mm thick Sheet glass,ordinary quality and glazing with oil putty in square n exc 0.5 sq. m in Each pane complete all as specified and as directed.

S&F for 5.5 mm thick Sheet glass,ordinary quality and glazing with oil putty in square exc 0.5 sq. m in Each pane complete all as specified and as directed.

S&F for 4mm thick figured glass, pinn headed type and glazing with oil putty in square n. exc 0.5 Sqm Each panes complete all as specified and as directed.

Hacking out old broken glass (any thickness, size, quality or description) from metal frames including punching or drilling out old glazing pins/spring clips and providing and fixing new one complete all as specified and as directed.

S&F in repair door closer hydraulically regulated designation No-2 universal type of aluminium body fixed to door frames with screws or by welding complete for door shutters of 850 to 1000mm in width complete all as specified and as directed.

S & F in repairs for stainless steel pipe 19 to 20 mm dia Drapery rod fancy type fixed in the SS hooks, and finials/side brackets (both side), complete all as specified and as directed.

S&F in repair stainless steel wire cloth 0.50 mm nominal dia of wire and average width of aperture 1.18 mm and fixed with stainless steel wire staple/ wooden beads complete all as specified and as directed.

Easing of door shutters for easy closing / opening tightening of hinges or changing the position of hinges adjustment of tower bolts, sliding bolts with new screws etc complete all as specified and as directed.

Easing of window shutters, kitchen cupboard shutters, show case shutter drawers incl fixing of screws adjusting handles, knobs tightening piano hinges incl misc small adjustments complete all as specified and as directed.

S&F for mild steel framed work such as guard bars/grills,grating etc with end of bars shouldered and/or riveted or forged into spikes and similar works including one shop coat of zinc chrome primer complete all as specified and as directed.

M&L for Cutting holes in brick walls in exc half brick and nexc one brick in cement in mortar for inserting holdfasts and making good dismantled portion in cement mortar 1:3 or cement concrete 1:2:4 Type B-1 complete all as specified and as directed.

Taking down old steel tubing & connection including cleaning for refixing for 15mm bore pipe complete all as specified and as directed.

Taking down old steel tubing & connection including cleaning for refixing for 20mm bore pipe complete all as specified and as directed.

Taking down old steel tubing & connection including cleaning for refixing for 25mm or 32 mm bore pipe complete all as specified and as directed.

S & F for 15mm bore GI tubing medium grade with all fittings and fixed complete to wall (Conceiled)and ceiling or laid in floors complete all as specified and as directed.

S&F for 20mm bore GI tubing medium grade, with all fittings fixed complete to wall and ceiling or laid in floors complete all as specified and as directed.

S&F for 25mm bore GI tubing medium grade, with all fittings fixed complete to wall and ceiling or laid in floors complete all as specified and as directed.

Cutting chases in brick walls, pinning in. making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exc 10 cm girth complete all as specified and as directed.

S& F in repairs Stop valve / Angle valve fancy type cast copper alloy chromium plated screwed down high pressure with capstan heads screwed both ends for iron pipe or for union and fixed 15mm bore complete all as specified and as directed.

S& F in repairs concealed type cast copper alloy chromium plated screwed down high pressure with capstan heads screwed both ends for iron pipe or for union and fixed 15mm bore complete all as specified and as directed.

S& F in repairs 15 mm bore bib tap cast copper alloy, chromium plated, fancy type with capstan headed, screwed down, screwed for iron pipe complete all as specified and as directed.

S&F in repair for 15mm chromium plated brass WHB mixer fancy type swan neck long nose- screwed down high pressure with or without lettered hot and cold and flynuts 15 mm dia complete all as specified and as directed.

S&F in repair 15mm dia pillar tap cast copper alloy chromium plated capstan head screwed down high pressure with or without lettered hot or cold with long screw shank and fly nutt screw for iron pipe complete all as specified and as directed.

S&F in repairs fancy type wall mixture of brass, chromium plated, 3 in 1 system with hot and cold arrangement, with provision for both hand shower & overhead shower complete all as specified and as directed.

S&F in repair C P glass corner shelf complete set of three Nos single glass including Screws and CP bracket complete all as specified and as directed.

S&F in repair Stainless steel sink with draining board, made out of 1.00mm thick sheet for kitchen or laboratory with plug, washers waste pipe, cast iron cantilever brackets, connecting union overall Size 915mmx460mm with bowl size 410mm x330mm x 160mm complete all as specified and as directed.

S&F in repair staniless steel sink 1mm thick without drainage board for kitchen with plug , waste pipe , washers, including cantilever cast iron brackets , connecting union to waste pipe etc, overall size 495x420mm with bowl size 410x330x160mm complete all as specified and as directed.

S&F in repairs kitchen plate rack made of stainless steel 1mm thick complete size 900 x 600mm x 200mm width of trade pattern complete all as specified and as directed.

S&F for MS Peg set of six powder coated as approved complete all as specified and as directed.

S & F for Soap dish, stainless steel complete all as specified and as directed.

M&L for 32 mm bore low density polythelene pipes (LDPE) with fittings of pressure rating 6 Kgf / Sqcm fixed to walls or in floors etc complete all as specified and as directed.

S&F in repair PVC connection 450 mm long, 15mm size with PTMT nuts complete all as specified and as directed.

S&F in repair PVC connection 600 mm long, 15mm size with PTMT nuts complete all as specified and as directed.

S&F in repairs 10 ltr PVC valve less symphonic action type flushing cistern, low level white with inlet ball valve float and handle with flush pipe complete all as specified and as directed.

S&F in repairs grating doom 125mm dia PTMT with waste hole (Min weight 40 grms) complete all as specified and as directed.

S& F in repairs chromium plated shower rose 200 mmx 200 mm size and 15mm dia with or without swivel joints including fixing to pipe and union complete all as specified and as directed.

S & F in repairs Towel rail 600 mm long and 20 mm dia brass chromium plated D type fixed with screws and wooden or plastic cleats complete all as specified and as directed.

S&F, in repair, PVC Bath Cabinet made from hard thermosetting material with mirror, white/ivory colour, 400 x 500mm size. complete all as specified and as directed.

M&L for 100mm dia cast iron floor trap plain with grating including jointing and fixed with cement concrete type B-1 (1:2:4) complete all as specified and as directed.

M&L for 75mm dia PTMT multi floor trap plain with grating including jointing with solvent cement complete all as specified and as directed.

Taking down eaves gutters and rainwater pipes (any size or pattern ),including all fittings,heads,shoes,bends,swan necks etc.including cleaning or refixing or removal to store complete all as specified and as directed.

S&F for 110 mm dia PVC (SWR ) pipes Single socketed in any length with rubber rings ljoits fixed to walls complete all as specified and as directed.

S&F for 75mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints laid in floors, trenches complete.

S&F for 110 mm dia PVC (SWR ) branches piece,double (double Y) equal or unequal with access doorrubber rings ljoits fixed to walls complete all as specified and as directed.

S&F for 110mm dia PVC (SWR) branch pieces, single (equal or un equal) , ordinary or inverted (spigot or socket type) or with parralled branches with access door complete all as specified and as directed.

S&F for 110 mm dia PVC (SWR ) bends any radius with access door complete all as specified and as directed.

S&F for 75 mm dia PVC (SWR ) bends any radius with access door complete all as specified and as directed.

S&F in repair vitreous China squatting pan of pattern Orissa Pan , size 580 x440 mm white with integral foot rests any pattertn (excl flushing cistern and flush pipe) complete incl provn of lime concrete bedding connection to flush pipe , trap etc & making good complete all as specified and as directed.

S&F in repair vitreous china wash down water closet pan Padestal pattern white excluding fixing bolts, flushing cistern and flush pipe with and incl 'P' or 'S' trap and making good to floor to match with existing complete all as specified and as directed.

S&F, in repair PTMT bottle trap ( with internal partition) 32mm bore having minimum water seal of 25mm(Minimum weight 32mm-260 gms complete all as specified and as directed.

S& F in repairs Vitreous China wash hand basin, white, flat back, size 550mm x 400mm including brass coupling, mild steel brackets fixed to wall, complete all as specified and directed.

S&F in repair Plastic water closet seat, white closed pattern with flat bottom, and cover and mild steel chromium plated or aluminium hinging device complete all as specified and as directed.

S&F, in repair, jet spray with 1m PVC tube (stainless steel), chromium plated for vitreous china padestal pattern water closet complete all as specified and as directed.

S&F, in repair, health faucet with wall hook and 1.0m chrome plated PVC hose pipe complete all as specified and as directed.

S&F, in repair, chromium plated, Toilet paper holder complete all as specified and as directed.

S&F CP waste fittings brass chromium plated for sink 32mm dia with long screws sinks and fly nuts , flenge end bedded in red led cement and other in fixed complete all as specified and as directed.

S&F CP waste fittings brass chromium plated for sink 40mm dia with long screws sinks and fly nuts , flenge end bedded in red led cement and other in fixed complete all as specified and as directed.

M&L for 10mm thick rendering on brick work or concrete surfaces in cement mortar 1:6 finished even and smooth without using extra cement complete all as specified and as directed.

M&L for 15mm thick rendering on concrete/brick surfaces in CM 1:4 with water proofing compound as per manufactures instruction finished even and smooth without using extra cement complete all as specified and as directed. . (Note:- WPC shall be measured and paid separately)

M&L for 5mm thick rendering on Concrete Surfaces of ceiling in Cement Mortar 1:3 finished surface Even and Smooth, without using extra cement complete all as specified and as directed.

Supply only liquid water proofing compound complete all as specified and as directed.

M&L for applying two coats of synthetic enamel paint over a coat of red oxide primer including Preparation on newly steel surfaces of any description over 10 cm width or grith complete all as specified and as directed.

M&L for applying two coats of synthetic enamel paint over a coat of pink primer including Preparation on newly wooden surfaces of any description over 10 cm width or grith complete all as specified and as directed.

M&L for applying three coat of white wash on newly plastered surfacces of ceilling including preparation complete all as specified and as directed.

M&L for applying two Coats of oil emulsion distemper over 3 mm thick wall care putty over a coat of chalk whitening primer including Preparation on Newly Plastered Surfaces of internal wall complete all as specified and as directed.

M&L for applying Two Coats of Cement Base Paint over a coat of alkali resistant primer including preparation on Newly Plastered Surfaces of external Walls complete all as as specified and as directed.

M&L for Prepration of old surfaces of walls includinng scrapping down smoke ,soot,and efflorescent salts and treatings oil and gresy spots, brooming down or steel wire brushing removing nails making good holes cracks etc on plastered or unplastered surfaces and applying one coat of white wash on walls complete all as specified and as directed.

M&L for Prepration of old surfaces of ceiling includinng scrapping down smoke ,soot,and efflorescent salts and treatings oil and gresy spots, brooming down or steel wire brushing removing nails making good holes cracks etc on plastered or unplastered surfaces and applying one coat of white wash on ceiling surface complete all as specified and as directed.

M&L for Prepration of old surfaces of walls includinng scrapping down smoke ,soot,and efflorescent salts and treatings oil and gresy spots, brooming down or steel wire brushing removing nails making good holes cracks etc on plastered or unplastered surfaces and applying one coat of oil bound distemper on wall (white or tinted) complete all as specified and as directed.

M&L for Prepration of old surfaces of walls includinng scrapping down smoke ,soot,and efflorescent salts and treatings oil and gresy spots, brooming down or steel wire brushing removing nails making good holes cracks etc on plastered or unplastered surfaces and applying Two coats of oil bound distemper on wall (white or tinted) complete all as specified and as directed.

M&L for Prepration of old surfaces of walls includinng scrapping down smoke ,soot,and efflorescent salts and treatings oil and gresy spots, brooming down or steel wire brushing removing nails making good holes cracks etc on plastered or unplastered surfaces and applying one coat of cement based paint complete all as specified and as directed.

M&L for Prepration of old surfaces of walls includinng scrapping down smoke ,soot,and efflorescent salts and treatings oil and gresy spots, brooming down or steel wire brushing removing nails making good holes cracks etc on plastered or unplastered surfaces and applying Two coats of cement based paint complete all as specified and as directed.

M&L for complete removal of existing treatment & washing rubbing down and stopping of distempered and painted surfaces incl preparation of old undecorated surface of walls and applying two coats of oil bound distempered over 2mm thick wall care putty overa coat of chalk whitening primer complete all as specified and as directed.

M&L for applying one coat of synthetic enamel paint of (white or tinted) on old painted wooden surfaces of any description over 10 cm width or girth including preparation complete all as specified and as directed.

M&L for applying one coat of synthetic enamel paint on old painted steel surfaces of any description over 10 cm width or girth including preparation complete all as specified and as directed.

M&L for applying one coat of synthetic enamel paint on old painted wooden surfaces of any description n exc 10 cm width or girth including preparation complete all as specified and as directed.

M&L for applying one coat of synthetic enamel paint on old painted steel surfaces of any description n exc 10 cm width or girth including preparation complete all as specified and as directed.

M&L for writing letters or figures (block, roman, Italic or Indian) not exc. 30cm high with synthetic enamel paint complete all as specified and as directed.

M&L for writing letters Stops, commas, short lines, dashes, hyphens, brackets, etc. as directed with synthetic enamel paint complete all as specified and as directed.

M&L 60 mm thick machine pressed precast concrete interlocking paver block and shape and size confirming to IS 15658-2006 of M-35 Grade with grey cement and pigment complete all as specified and as directed.

M & L for Sand filling under floors or in foundations including watering and consolidation complete all as specified and as directed.

M & L for 75mm thick PCC (1:4:8) type D-2 using 40mm graded stone aggregate as in sub base, sub floor of flooring, paving, path etc surfaces finished even and fair to receive top layer complete all as specified and as directed.

M&L for Chequered cement concre tiles 20 cm x20 cm x25 mm thick, set, jointed and pointed with grey cement and pigment to match over and including 15mm thick cement screed bed in CM 1:6 complete all as specified and as directed.

M&L for out door tiles 30 cm x 30 cm x 10 mm thick rubberised mould set, jointed and pointed in neat cement slurry as in floors etc over and including 15mm thick cement screed bed in CM 1:6 complete all as specified and as directed.

M/s Om Infracon (BID ID -3100345)

HARISH ANAND (BID ID -3098377)

Chetna Enterprises (BID ID -3100698)

mandeka constructions (BID ID -3100228)

SHRI KRISHNA CONSTRUCTIONS (BID ID -3100600)