Bifurcation Augmentation of water supply scheme in village Tedewal Bass of village Jatuli From Existing water supply scheme Jatuli 01. No. Block Nurpur Bedi Distt. Rupnagar

Amount

Constructing one No. 1 of 25 KL (25,000 liters) capacity with sill level not less than21.50mtr and 23.20 mtr. height upto FSL Complete with external RCC stair case with landing slabs at each staging 21.50 mtr. RCC roof, ventilator single main hole cover lightening conductor etc. complete as described in schedule no 3 Providing and fixing DI K-9 D/F expansion joints conforming to (IS-8329/2000) or latest bell mouth and D/F puddle collars as per DWSS design on basis of enclosed drawing. Duck foot bends, conforming to ISI-13382 and DI K-9 D/F Sluice valve duly ISI marked (IS-14846-2000 or latest) one each with inlet, outlet and scour pipe including providing and installing inlet, outlet scoure pipes and overflow DI K-9 Double flanged pressure pipes as par IS 8329-2000 and latest duly ISI Marked from bottom dome to duck foot bend and further up to 2.75 mtr. as per detail specification TMT steel & Painting of all complete shall be included in cost & P/F aluminium leader inside the OHSR and MS ladder outside the tank complete in all respects as per specification. (The specification & Drawing are based on safe bearing capacity of soil is less than 8.75 tone per sqm. In case the safe bearing capacity of soil is less than 8.75 tone per sqm. The contractor shall submit his own design for foundation portion based on actual safe bearing capacity as per DWSS specification 20mm i/d GI rating in two rows on both sides. The difference in quantities from the standard drawing based on 8.75 tone per sqm safe bearing capacity will be paid as per CSR+ Prevailing ceiling premium Including providing and fixing automatic electronic water level control device and construction of plinth protection around OHSR with masonry toe wall with 40 mm thick CC 1:2:4 on top over 100mm thick CC 1:8:16 & inside earth filling within lead of 5 Km, Including overflow haudi complete in all respects.

Cost for 25000 Ltr. Capacity additional height of OHSR for 6 mtr.

PUMPING MAIN (RISING MAIN)

Providing, Laying , fixing & jointing of P.V.C. Pipes as per ISI-4985 (ISI marked with the prior approval of Engineer-in-Charge) along the Trenches and laying the same in Trenches to correct alignment and gradients, cutting, jointing and testing complete as per specifications including excavation.

110mm o/d pipe of 10 Kgf. / sqcm

Providing & fixing C.I/D.I Flanged end, stem of SS (AIS 1410) and Bronze (gunmetal) working parts Sluice Valves ISI marked 14846-2000, including jointing, testing & cost of Nut, Bolt & insertion sheet, all carriage complete (with the approval of Engineer - in – charge)

Construction of masonry sluice valve chamber excluding Sluice valve cover as per standard design & drawings of public health department (2 no. each of size 0.9m x 0.9m

Providing, Fixing & jointing Cast Iron Surface box for Sluice Valve, Air Valve, Fire hydrant etc. including all carriages complete @ 3Kg Each (2 x 3kg = 6 kg.)

Distribution network

Providing, Stringing out PVC pipes as per ISI-4985 (ISI marked with prior approval of Engineer in charge) casting along the Trenches and laying the same in Trenches To correct alignment and gradients, cutting. Jointing and testing, including excavation & specials complete as per specifications for for more than 3 mtr street width Complete in all respects (Mechanical Means) Note:- (For Ordinary soil having gravel upto 40%)

PVC pipe 63mm o/d

PVC pipe 90mm o/d

PVC pipe 110mm o/d

Providing and fixing and jointing ISI marked Gun – Metal peet valves (Heavy Pattern) as per IS 778 with hand wheels, on G.I Pipe lines laid in the ground or inside buildings including all carriages complete

Providing & fixing C.I/D.I Flanged end, stem of SS (AIS 1410) and Bronze (gunmetal) working parts Sluice Valves ISI marked 14846-2000, including jointing, testing & cost of Nut, Bolt & insertion sheet, all carriage complete (with the approval of Engineer - in - charge)

Providing, Fixing & jointing Cast Iron Surface box for Sluice Valve, Air Valve, Fire hydrant etc. including all carriages complete 4 No. with Each 3kg I.e (4 x3 = 12kg)

Construction of masonry sluice valve chamber excluding Sluice valve cover as per standard design & drawings of public health department 4 No. With each of Size 0.6m x 0.6m

Construction of masonry sluice valve chamber excluding Sluice valve cover as per standard design & drawings of public health department 1No. With each of Size 0.9m x 0.9m

Hand boring Horizontly for crossing of pipe under road or any other obstacle by using Auger/Bocki method.Including excavation, stringing and jointing of pipe upto 110mm complete

PUMPING MACHINERY

Providing, installing, testing and commissioning of 1 no. Electrically driven pumping set of reputed make , capable of deleviring 182 lpm against a head of 99 mt . Complete in all respects (7.50 BHP)

Supplying lowering of 65mm dia GI pipe as per IS 1239 (B - class) premim make such (as Jindal Hisar) including cost of specials such as tees, bends , sockets elbow etc, cutting , treading and testing in trenches in the ground. Complete in all respects

Providing and fixing of submerssible of 2.50 mm ² core cable , complete in all respect

Providing installing, testing and commissioning of 1 no. SOFTWARE BASED DOL (DIRECT ONLINE) SMART MOTOR CONTROL PANEL (EC/WS ) electricity & water saver, 1 HP to 12.50 HP oil immersed 2 set contactor Complete job including indicators, switches, over load functions , line fault protection , power saving functions as per manufacturer specifications, details & enclosure etc. Complete in all respect including carriage , GST as applicable & installation charges. (As per analysis A0 to 25 ampere digital relay B 1 HP to 12.50 HP Oil immersed 2 set contactor)

C.I FITTING INSIDE PUMP CHAMBER

Providing and installing 100 mm dia delivery main (From Tube well to Duck Foot bend including cost of C.I/D.F Pipes, D/F Sluice valves, D/F NRV & Specials as C.I Bends, Tail Piece Tees etc.. inside the pump chamber as per standard design complete in all respects

Construction of V- Notch Houdi (Size 1.80 x 0.90 m) including cost of v – notch as per standard design & drawings of Public health Department

HOUSE HOLD CONNECTION

Providing household connection with laying, jointing, fixing, testing MDPE pipes (as approved by Engineer incharge), including cost of Specials such as tees, bends, sockets, elbow etc. cutting, threading and testing in trenches in the ground complete,15mm i/d 4.50 m (2.5 mtr. MDPE pipe + 2.0 mtr. GI pipe), 3” i/d uPVC clamp , 1 No.,ISI Marked G.M. ferrule as per IS:2692, connection of 15mm i/d ferrule medium, C.I.bib cock as per IS:210 with stainless steel spindle of approved make (to the approval of Engineer-in-charge, 15mm i/d. Water meter (15mm), gun-metal peet valves (Heavy Pattern) with hand wheels, on MDPE Pipe lines laid in the ground or inside buildings including all carriages complete.15mm i/d Gun Metal peet valve heavy pattern., (3 nos) (Nipple 15mmx150mm, (4 nos) Nipples 15mmx100mm, (5 nos) Elbow 15mm i/d ISI marked, Union couplings, G.I Hooks (3 nos). Complete Job in all respect (refer CSR item nos. 28.1, 28.35, 28.34b, 30.65 b, 28.46 ,28.43 (a) 28.40 (a))

P/F Water connection WITHOUT WATER METER

Providing & fixing water meter

CHLORINATION & DISINFECTION

Prov. Installing, testing & commissioning one No. Electronically actuated, Diaphragm Operated, Metering System, Chemical Dosing Chlorinator ,suitable for delivering 0.5 to 6 Litres of Bleaching Powder Solution/Sodium Hypo solution per hour under maximum delivery pressure up to 7 Kgf/cm², and suction lift not less than 1.5 m, as per DWSS. standard specifications.

PUMP CHAMBER with toilets

Construction of Pump Chamber having 3.70x 4.30 mt plinth area including cost of electric wiring & sanitary installations as per standard design.complete in all respects. Including costruction of toilet outside the pump chamber.

Development of Water Works Site

Providing & fixing G.I. Barbed wire 3 ply fencing around the head works site in three rows complete in all respects including cost of winding wire & aluminum painting complete in all respects as per standard Drawing (25+7+40+38.50) =110.5 - 2.44 = 108.06 x 3 rows = 324.18

Providing & fixing angle iron pickets with angle 40mm x40mm x 6mm including cost of concrete block & painting complete in all respects as per standard Drawing D-8.

Providing & fixing D.Hook complete with MS Bolts size 300mm x 18mm as per standard Drawing.

Construction of brick masonry corner pillar including cost of cement pointing including cost of material complete in all respects as per standard Drawing.

Construction of masonry gate pillar including cost of MS Steel Gate size 1.22mtr x 1.37 mtr as per standard Drawing complete in all respects

Construction of Cement Concrete, Foot Path with masonry toe wall & earth filling inside water works as per standard Drawing.

Providing & fixing MS Sign Board as per standard size of DWSS as per Drawing.

Carriage of Materials

Extra for Carriage of Fine & Course aggregate i.e. Sand & Bajri from query to water works site beyond 5 km (Qty as worked out for the components to be constructed detail 1.9 & rate as per lead on CSR + Ceiling Premium for the applicable lead beyond first 5 km) 30 km.

Sand & BAJRI

Environment Charges

Grassing of grounds with doob grass including uprooting rank vegetation and weeds by digging the area to a depth of 15 cm, removing all weeds and other growth with roots by forking repeatedly, breaking clods, mixing fertilizer, rough dressing and then fine dressing for planting new grass, including disposal of all rubbish with all leads and lifts, planting grass roots in rows 10 cm apart in both directions, watering, weeding and maintenance till turf is formed

Planting hedge including digging of trench 60 cm wide to 15 cm depth and mixing FYM, fertilizer and insecticides, planting of sapling at 30cm distance from plant to plant in two rows.

Supplying and planting permanent trees in prepared pits and watering

Supplying and planting permanent shrubs in prepared pits and watering

OPERATION AND MAINTENANCE

Operation and maintenance is carried out by the contracting agency for 3months (90 days) having Provision of Operating Staff Pump Operator –Cum Chowkider, Provision of Bleaching powder or sodium chlorite for disinfection of water ( 100 units) etc. Complete (Excluding electricity charges)