REPAIR TO HARDSTANDING DRAINAGE, FENCING, PATH ETC AND CONNECTED ITMES AT KALUCHAK MIL STATION UNDER GE KALUCHAK

Demolition of brick work or stone / boulder masonry including all quoins, arches, pillars, etc. built in cement mortar or cement lime mortar complete all as specified and directed.

M & L for brick work with sub class ‘B’ old size bricks straight or curved on plan exc. 6.00 m mean radius built in cement mortar 1:4 complete all as specified and directed.

Taking down cement plaster on brick or stone walls etc including raking out joints, hacking for key, scrubbing down with water etc, complete all as specified and directed.

M & L for Rendering 15mm thick fair faces of brick / concrete surfaces in cement mortar 1:4 finished even and smooth with out using extra cement complete all as specified and directed.

M & L for preparation of newly plastered or un-plastered surfaces of ceiling and applying two coats of cement base paint complete all as specified and directed.

M & L for Extra for forming fair finished drain or channel 30 cm inner girth in cement concrete, using extra cement, including forms, moulds, mitred/stopped ends etc. complete all as specified and directed.

Dismantling of fencing wire mesh,any type complete all as specified and directed.

Dismantling posts or struts (wood, steel or R.C.C.) any section, including taking out embedded portion and making good disturbed ground complete all as specified and directed.

Excavation in post holes (or similar holes) each not exc. 0.50 Cum, getting out, returning, filling and ramming earth or broken rubble mixed with earth around in layers not exc. 25 cm watering and removing surplus soil to a distance not exc. 50 m and making good surface as in hard / dense soil complete all as specified and directed.

S&F angle iron fencing post, struts & flat iron straps to chain link fencing including cutting tops to shape as directed, drilling holes, notching or wire etc, flat iron fillets (for seruring wore mesh etc) including all necessary drilling, bolting or riveting etc and similar work confirming to Fe-410-0 or Fe 310-0 any size all as specified and directed.

S & F of mild steel screw bolts (machine made) with hexagonal or square head at one end and screwed the other or screwed both ends, each screwed ends to be fitted with washer and one hexagonal or square nut, length of bolt exc 10cm and n exc 15cm long and 11 to 15 mm dia of neck complete all as specified and directed.

Supply only Chain link MS galvanisd fencing, any size or type weight n. exc 4.00 kg per sqm complete all as specified and directed.

Fixing only chain link fencing including line wires, any mesh, size and type to any type of standards, rails, straining bolts, etc. including provission of binding wire complete all as specified and directed.

M & L for Barbed razor tape concertina coil SG hot galvanised spring tensile wire as approved by GE, dia of coil when stretched 450mm having minimum number of circles 10 Per RM, minimum number of clips 15/RM, complete all as specified & directed.

M & L for preparation of steel surfaces over 10 cm width or girth and applying two coats of synthetic enamel paint over one coat of red oxide primer complete all as specified and directed.

S & F of rolled mild steel framed work as in doors or gates of angle or other section with gusset plates, rails, braces etc complete, drilled for fixing of steel sheeting or other covering doors etc. to be prepared for hanging or steel hanging door fitting and also fastening complete all as specified and directed.

M & L for mild steel round bars 10 mm dia and over, confirming to Fe-410-W (Grade E-250) cut to length, bent to shape required including cranking, bending spirally for hooping for columns and binding with and including mild steel wire (annealed) not less than 0.9 mm dia securing with clips complete all as specified and directed.

M & L for Factory made precast chequrered cement desiner paver tiles of different colour and shape of zone (300 x 300 x 20) mmm laid and jointed with grey cement slurry with Pigment to match the colour of tile, compressive strength not less than 250 Kg/Sqm including 15mm thick screed bed in cement mortar 1:4 complete all as specified & directed.

M&L for Dura stone external designer floor tiles, any colour, shape and size not less than (300 x 300)mm 9-10mm thick M-25 grade, set and jointed in neat cement slurry and pointed in white or coloured cement to match over & including 15mm thick screed bed in cement mortar 1:4 complete all as specified and directed.

Providing and laying 60 mm thick factory made chamfered edge cement concrete paver block of M-35 grade with approved colour, design & pattern as in footparth, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of fine sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand; complete all as specified and directed.

M & L for 100 mm thick cement concrete 1:4:8 type D-2, using 40 mm graded stone aggregate as laid in laid in floor finishes without using extra cement complete all as specified and directed.

M & L for 75 mm thick PCC 1:3:6, nominal mix, type C2, using 40mm graded crushed stone aggregate as in sub base of floor, hard standing, path, pavings etc, surface finished even and smooth without using extra cement, laid in alternate bays, complete all as specified & directed..

M & L for 40 mm thick cement concrete 1:2:4 type B-1, using 20 mm graded stone aggregate as laid in floors, surface finished even and smooth using extra cement, laid in alternate bays, complete all as specified and directed.