Supply And Installation Hospital bed

Amount

Hospital Plain Bed with offset leg without castors (including Mattress)Overall size 2000 L. (+ 50mm) W900 mm (+50 mm) H 600 mm (+ 25 mm) without Mattress The Bed frame shall be made up of minimum.60mm X 30mm Rectangular CRCA minimum 16G tube. Fix panel shall be made from min. 18G CRCA sheet double press bend on four sides and shall have uniformly embossed hcles in three row minimum at equal pitch. Panel shall be supported with rectangular tube stiffener duly welded. Detachable Stainless Steel bows of min.. 31.75 mm diameter equal height of min.250 mm above bed frame with min. two Vertical supports & one Horizontal support of minimum 12.7 mm diameter and 16G Stainless Steel Pipe or fixed with laminated panels. Legs shall be made up of min. 31.75 mm diameter pipes. The legs shall be bolted to the frame on brackets welded in such a way that bolt or nut should not appear on top surface of the bed frame. Leg shall be fitted with rubber shoes with nylon reinforcement. Facility shall be provided for flush 1.V. Rod at four locations. Provision shall have to hold Mosquito curtain poles. A mattress suitable for the bed made of 25mm thick soft foam top layer and 75mm thick firm grade of density 70 to 79 g/dm? , indentation hardness 9 to 11.9 as per 1S 8391 of 1989 or latest bottom coir layer for the patient comfort and better pressure care. covered with the Rexine which shall be conformed to Type A grade 1 Class A of |S 8698 of 1984 or latest.

Semi Fowler Bed with offset leg with castors (including Mattress) Overall size 2000 L(+ 50mm) W900 mm (+50 mm) H 600 mm (+ 25 mm) without Mattress The main frame should be made from 60mm X 30mm minimum 16 G ERW rectangular tubes, Four sections top should be made up of 18G CRCA sheet; double press bend on four sides and uniformly embossed holes. in three row minimum at equal pitch. Backrest and leg end section should be made up of 18 G CRCA sheet welded to 25.4 mm diameter 16G CRCA pipe. Fix section should be made up of 25 mm X 25 mm X 18G CRCA tube and 25 mm xX 5mm M.S Flat welded to main frame. Knee frame should be made up of 50 mm X 25 mm X 16G and 25 mm X 25 mm X 18G tube welded to 25 mm X 5 mm thick flat. Backrest and knee rest section can be adjusted by screw and/or lever mechanism with attached individual stainless steel handle with PVC grip. Detachable Stainless Steel bows of min.. 31.75 mm diameter equal height of min.250 mm above bed frame with min. two Vertical supports & one Horizontal support of minimum 12.7 mm diameter and 16G Stainless Steel Pipe or fixed with laminated panels. Legs shall be made up of min. 31.75 mm diameter pipes, The legs shall be bolted to the frame on brackets welded in such a way that bolt or nut should not appear on top surface of the bed frame. Leg shall be fitted with minimum100mm Castors, 2 with brake. Facility shall be provided for flush LV. Rod at four locations. Provision shall have to hold Mosquito curtain poles. A mattress suitable for the bed made of 25mm thick soft foam top layer and 75mm thick firm grade of density 70 to 79 g/dm? , indentation hardness 9 to 11.9 as per |S 8391 of 1989 or latest bottom coir layer for the patient comfort and better pressure care. covered with the Rexene which shall be conformed to Type A grade 1 Class A of |S 8698 of 1984 or latest

Samar Steel Industries

VISHAL ENTERPRISE

Vijay Enginreeing Company

RAJNEEL DISTRIBUTOR