Webel IT Park CyberSEc 19 20 80

Amount

TARATALA

Providing of speaker Pdium of Size & shape as shown in the drawing to be made of 19mm BWR ply.All outer surface shall be finished with natural veneer of approved brand & shade and inside to be finished with stain polished edges of top surface to be fitted with 40mm half round teak wood moulded other surface edges shall be finished with 19mm thick polished teak wood lipping.The top table have outlets of computers,light fitting and 02 nos of goose neck microphones,complete as per drawing and direction of engineer in charge/Architects.

providing & fixing in position seasoned and antitermite treated 1st class sal wood grid frame work of 1200mm x 1200mm x (both ways)to be supported by vertical post of 75mm x 75mm x wooden post / studs for upto 300mm high stage.The grid shall be divide by 40mm x 40mm sal wood by placing the same BWR plyon frame as base of finished floor,fixed with floor and adjacent wall by means of all necessary fixures as required as per drawing and direction of Engineer in Charge.

Supplying, fitting and fixing boiling water resistant ply conforming to IS: 303-1989 bonded with phenol formaldehyde synthetic resin of approved make and brand fitted and fixed as per design as per approval and direction of Engineer-in-Charge.[excluding the cost of supporting frame work and teak wood batten/Lipping] at any floor

Providing and Fixing Vertical Bilnd/Dustguard of 100 mm with modern trend look as per approved make

Supplying, fitting and fixing wire manager cap including cutting hole as required.

Supplying, fitting and fixing up to 25mm Teak wood beading including polishing.

Applying Interior grade Acrylic Primer of approved quality and brand on plastered or cencrete surface old or new surface to receive Distemper/ Acrylic emulsion paint including scraping and preparing the surface throughly, complete as per manufacturer's specification and as per direction of the EIC.Water based interior grade Acrylic Primer of two coats

4 Applying Acrylic Emulsion Paint of approved make and brand on walls and ceiling including sand papering in intermediate coats including putty (to be done under specific instruction of Superintending Engineer) : (Two coats)

Supplying, fitting and fixing 300mm powder coated MS Telescopic channel.

Supplying, fitting and fixing 75mm SS handle.

Supplying, fitting and fixing SS lock for tables/drawers/cabinets.

Supplying, fitting and fixing S/S hinge.

Supply,fitting & fixing of SS Auto close hinge

supply fitting & fixing of approved make Hydraulic door closer fitted and fixed complete. Heavy type

supply , fitting & fixing Door stopper.(Brass)

Supplying 6levers approved make Crystal Satine Mortice Lock with keys including fitting & fixing complete.

French polishing to wood work including preparing surface (ordinary gloss)

15 mm thk. Plaster (to wall, floor, ceiling etc.)in any floor with sand and cement mortar including ounding off or chamfering corners as directed and raking out joints including throating,nosing and drip coursescaffolding/staging where necessary

Rendering the Surface of walls and ceiling with White Cement base WATER PROOF wall putty of approved make & brand.(1.5 mm thick)

Providing and fixing of acuastic false ceiling board with powder coated G.I. grid suspension system. (To be similar to existence)

Supplying fitting, fixing decorative lamination conforming to IS: 2046 : 1995 as per approved make, brand, finish and thickness with fitting, fixing the same on Particle/MDF / Ply Boards with recommended / approved adhesive with proper clipping the sides for better attachment as per direction of Engineer-incharge. The rate includes the cost of labour, adhesive and all incidental charges thereof.Glossy/Matt/Suede excluding surface texture or metallic lustre.Thickness of laminate 1 mm

Supply , fitting & fixing of Magnetic White board of size 8'x4'

PACIFIC ENGINEERS

ALMO DECOR