SHIFTING OF AHU ON MS STAND AND ALTERATION TO DUCT AT MANEKSHAW CENTRE UNDER GE (U) P AND M DELHI CANTT-10

Amount

1. M&L for disconnecting incoming/outgoing electric cable connection of Electric motor installed inside AHU of VIP BAR. - 01 Job 2. Material and Labour for dismantling of existing Air Handling Unit of any capacity its all parts including side puff panel, cooling coil, blower motor, filters, dampers and its wiring, chilled water pipe connection ofsupply and return. - - 01 Job. Note :- While dimantling of AHU parts, cost of welding / brazing to be included in quoted rates. 3. M & L for Cross arms, bracings, supports, clamps and back plates fabricated from structural steel sections including nuts, bolts, washers, welding, bending cold or hot, drilling holes for bolts, in any shape or size as indicated or directed and inclusive of one primer coat, one under coat and one finishing coat of paint.-320 KG 4. Material and Labour for re fixing the Air Handling Unit dismantled in item No. 2.00 its all parts complete on MS Stand. while re fixing the side puff of AHU its is required to that arrest leakages, cleaning of Pre-Micro Filters, vertical GI sheet supports, replacement of U/S foam insulation of best quality using adhesive substance to avoid cold air leakages, re-assembling all the dismantled components to its original position using new nut, bolt, washer and other packing material etc as directed by engineer in charge. - 01 Job 5. M & L for fabrication of bottom made out of SS tray of existing size with drain pan as directed and specifed by engineer in charge. - 01 Job 6. S & F new gasket kit for complete side puff panels of AHU as directed by engineer in charge. - 01 Each Job 7. Supply and fixing acoustic lining of supply air ducting complete with GI frame , tissue paper , 26 Guage perforated AL Sheet 25mm thick of density 32 kg/cum fiber glass insulation complete all as specified and directed. - 06 Sqm 8. Supply, install, testing and commissioning of Duct insulation with 25mm thick Nitrile Rubber insulation of class "o" fire retardant with protective coating over insulation with fiber glass cloth & UV paint (for exposed duct) for Ducts installed outside, (exposed to sunlight) complete all as specified and directed by the Engineer-in-charge. - 45 Sqm 9. Supply and lay M S Pipes heavy grade with all fittings laid in floors or fixed to walls and ceilings etc of sizes 25 MM bore - 06 RM 10. M & L for Insulation of M S Pipe with PUF slab 30 mm thick with and including applying bituminuous compound and GI cladding with 26 gauge GI sheet complete of sizes 25mm bore - - 06 RM 11. Supply and lay GI Pipe heavy grade with all fittings laid in floors or fixed to walls and ceilings etc of sizes 25 MM bore - 12 RM 12. Testing & Commissioning of Complete Exhaust AHU at full load inclusive of fixing/alignment of motor complete in all respect as per direction of Engineer-In-charge. 01 Job.

Ahuja international

CHAUHAN ENTERPRIES

Suman Uni Controllers