138WE/L-74/2020-21

Amount

Excavation in trenches, not exceeding 1.5 mtr wide and not exceeding 1.5 mtr in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. not exceeding 10 Sqm on plan and not exceeding 1.5 mtr in depth and getting out, hard and dense soil, complete all as specified and directed.

Excavation in post hole each not exc 0.5 cum getting out in hard/dense soil, returning, filling in and ramming earth or broken rubble mixed with earth around in layers not exc 25 cm, watering and removing surplus soil to a distance not exc 50m and making good surface, complete all as specified and as directed.

Surface excavation (not exceeding) 30 cm deep and averaging 15cm deep and getting out as in hard and dense soil, complete all as specified and as directed.

Demolition of bick/precast block work or stone work built in cement mortar including all quoins, arches pillars etc but excluding ashlar facings ,dressed stone work and precast concrete articles and stacking the serviceable materials within 100m and disposal of unserviceable material, debris and rubbish to a distance not exceeding 100m complete all as specified and directed.

Demolition of cement concrete (unreinforced) in ground floor and paving n.exc 15 cm thick above or below ground level complete and disposal of unserviceable material, debris and rubbish to a distance not exceeding 100m complete all as specified and directed.

Demolition of cement concrete reinforced (reinforced ) of any description and in any position not otherwise specifically provided for and removing rubbish to a distance not exceeding 100m complete all as specified and directed.

Dismantling of floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and as directed by the Engineer-in-Charge.

Dismantling plain or corrugated steel sheeting any guage thickness including nanital or similar pattern complete all as specified and directed.

Taking down chowkhats or frames with shutters (without taking off shutters from the frame) area exceeding 1.5 sqm and not exceeding 4 Sqm each complete all as specified and as directed by the Engineer-in-Charge.

Taking down cement plaster on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc, complete all as specified and as directed by the Engineer-in-Charge.

Returning, filling in including spreading levelling watering and well ramming in layers not exc 25 cm thick in any type of soil, complete all as specified and directed.

Removing excavated materials/ soils, not exceeding 50mtrs and depositing where directed at a level not exceeding 1.50mtrs, complete all as specified and directed.

Hacking out old broken glass any thickness , size, quality or description from wooden/steel frame or stone, concrete or brick surrounds glazed with putty or fixed with beads complete all as specified and as directed by the Engineer-in-Charge.

Hard core of broken stone or boulders of gauge not exc 63 mm deposited ,spread and leveled in layer not exc 15 cm thick complete all as specified and directed.

M&L for Precast cement concrete block masonary with solid blocks, PCC 1:3:6, type C-1, (using 20mm graded crushed stone aggregate) masonry with solid blocks exceeding 10 cm in width and setting in mortar 1:6, complete all as specified and directed.

M&L for plain cement concrete 1:2:4, type B-0 (using 12.5mm graded crushed stone aggregates) as in lintels upto 1.50m clear span, cills, steps, seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, benching, kneelers, apex stones bed plates, water troughs and the like including weathering, slightly rounded or chamfered angles and throating, complete all as specified and directed by Engr-in-Charge.

M&L for PCC 1:4:8, type D-2 (using 40mm graded crushed stone aggregates) as in mass concrete and filling of foundation complete all as specified and directed by Engr-in-Charge.

M & L for 100 mm PCC 1:3:6 type C-2 using 40mm graded aggregate as sub base finished even and smooth with out using extra cement, complete all as specified and directed.

75mm thick Plain cement concrete (1:3:6), type C-1 (using 20mm graded crushed stone aggregate), as sub base of floor or paving, complete all as specified and as directed.

M&L for 75mm thick Plain cement concrete (1:3:6), type C-1 (using 20mm graded crushed stone aggregate), as in plinth protection, laid in alternate pannels, finished even and smooth without using extra cement, complete all as specified and as directed.

M&L for 40 mm thick PCC 1:2:4 type B-1 (using 20 mm graded crushed stone aggregates) as in floor finish, surface finished even and smooth without using extra cement complete all as specified and directed.

M&L for 40 mm thick PCC 1:2:4 type B-0 (using 12.5 mm graded crushed stone aggregates) as in damp proof coarse to horizontal or vertical surface include necessary form work, complete all as specified and directed.

M&L for Precast cement concrete block masonary with solid blocks, PCC 1:3:6, type C-1, (using 20mm graded crushed stone aggregate) masonry with solid blocks 10 cm thick ( with plain or interlocking joints) and setting in mortar 1:6, complete all as specified and directed.

M&L for precast RCC 1:2:4, type B-1 (using 20mm graded crushed stone aggregates) as in precast cement concrete slabs of drain/manhole covers, set in cement mortar 1:4, complete all as specified and directed by Engr-in-Charge. Note : Slab covers shall be floated with surface vibrator and over turfed base, arrangement for turfed base has to be made by contractor and the rates for the same should be included in the quoted rate for this item.

M&L for RCC M-30, design mix, using 20mm graded crushed stone aggregate as in slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like, complete all as specified.

M&L for RCC M-30, design mix, using 20mm graded crushed stone aggregateas in foundations, including rafts, footings foundation beams, plinth beams and like complete all as specified and directed.

M&L for RCC M-30 (Design Mix), (using 20mm graded crushed stone aggregate), as in beams, cantilivers, bressummers, lintels over 1.5m span, complete all as specified and directed.

M&L for RCC M-30 (Design Mix), (using 20mm graded crushed stone aggregate), as in columns, piers, posts and struts, complete all as specified and directed.

S&F 2nd class hard wood plain, solid, straight chowkhats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints, complete all as specified and directed.

M&L for mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips, complete all as specified and as directed.

M&L for mild steel TMT bars 6 to 8mm dia, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips, complete all as specified and as directed.

Ditto as per ser. Item No.32.00, but 5mm dia and over upto and including 10mm dia in stirrups, spacers and binders, complete all as specified and as directed.

M&L for rolled section as in main rafters cross beams purlins, where connected to common rafters and running rails conforming to Fe-410-W (Gde-250) quality B, complete all as specified and directed.

S&F for steel work in tubular trusses including special shaped washer etc complete using ERW or induction butt welded tubes conforming to I. S. 1161-1979 grade St-240, complete all as specified and directed.

M&L for framed work as in doors or gates of angles or other section with gusset plates, rails, braces, etc., complete drilled for fixing of steel sheeting or other covering. Doors etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging, also fastening and fixing Fe 410-W (Gde E-250) quality - A, complete all as specified and directed by Engr-in-Charge.

M&L for Non skid coloured ceramic tiles 7 to 8mm thick (Square/rectangular) area of each tile exc 0.06 Sqm and not exceeding 0.11 Sqm in floor etc set and jointed in neat cement slurry and pointed with white or coloured cement mixed with pigments to match the screed bed with CM (1:4) 15mm thick laying floor tiles complete all as specified and directed. Shade/ colour of tile shall be approved by GE.

Material and Labour for Non skid ceramic coloured tiles 7-8mm thick (square/rectangular) , area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, as in floors etc, set and jointed in neat cement slurry and pointed with white or coloured cement mixed with pigment to match the shade of tiles over and including 15mm thick screed bed in cement mortar 1:4, complete all as specified and as directed by the Engineer-in-Charge. Shade/Colour of tile shall be approved by the GE.

Material and Labour for Glazed ceramic coloured tiles of size 350 mm x 250 mm/ 450mm x 350mm x 7 mm thick as on vertical surfaces , set and jointed in neat cement slurry and pointed with white or coloured cement mixed with pigment to match the shade of tile over and including 10 mm thick cement screed in cement mortar 1:4 complete all as specified and as directed by the Engineer-in-Charge. Shade/Colour of tile shall be approved by the GE.

S&F 0.80mm thick plain galvanised mild steel sheeting as in ridges hips, valley gutters drip and straight flashings (length and girth as fixed) with L or J hooks or coach screws with grade of zinc coating 275, complete all as specified and as directed.

Supply and fixing Galvanised, corrugated mild steel sheeting 0.63mm thick with two corrugation side lap, fixed with L-type or J-type hook or cranked bolts and washer in roof, walls etc with grade of zinc coating 275 complete all as specified and as directed by the Engineer-in-Charge.

M&L for Rendering 15 mm thick on fair faces of brick or concrete surfaces, in cement mortar 1:3 mixed with water proofing compound @ 3% by weight of cement, rendering is to be finished even and smooth (without using extra cement), complete all as specified and as directed. NOTE- WPC will be measured and paid separately.

M&L for Rendering 15 mm thick on fair faces of brick work wall surfaces, in cement mortar 1:6, rendering is to be finished even and smooth (without using extra cement), complete all as specified and as directed.

M&L for Rendering 15 mm thick on external wall surfaces, in cement mortar 1:4, rendering is to be finished even and smooth (without using extra cement), complete all as specified and as directed.

M&L for Rendering 10 mm thick on fair faces of brick or concrete surfaces, in cement mortar 1:6, rendering is to be finished even and smooth (without using extra cement), complete all as specified and as directed.

M&L for Rendering 10 mm thick on fair faces of brick or concrete surfaces of wall, in cement mortar 1:4, rendering is to be finished even and smooth (without using extra cement), complete all as specified and as directed.

M&L for Rendering 5 mm thick, on fair faces of brick or concrete surfaces, in cement mortar 1:3 on ceiling surfaces, finished even and smooth (without using extra cement), complete all as specified and directed by Engr-in-Charge.

S&F Galvanised mild steel wire cloth of 0.56mm nominal dia of wire and average width of aperture 1.18mm and fixed with 2nd class wooden beading suitable for existing wooden doors or including making holes/cutting rusted bolt & nut on steel windows and provn of new nut and bolts suitable for MS beading, complete all as directed by Engineer-in-Charge.

Material and Labour for powder coated (minimum thickness of powder coating 50 micron) anodised aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc complete all as specified and as directed by the Engineer-in-Charge.

Material and Labour for powder coated (minimum thickness of powder coating 50 micron) anodised aluminium doors shutters & partition aluminium section weighing 0.55 Kg/m, including joining cleats, glazing clips, rubber neoprene packing, anodised aluminium snap beading screws etc.,complete all as specified and as directed by the Engineer-in-Charge.

M&L for Sheet glass 5mm thick ordinary quality and glazing with oil putty or wooden beads in square exc 0.50 sqm in each pane complete all as specified and as directed by Engineer-In-Charge.

M&L for figured glass 4mm thick figured and glazing with oil putty or wooden beads in square not exc 0.50 sqm in each pane complete all as specified and as directed by Engineer-In-Charge.

M&L for Sheet glass 3mm thick ordinary quality and glazing with oil putty or wooden beads in square not exc 0.50 sqm in each pane complete all as specified and as directed by Engineer-In-Charge.

Supply and fixing Aluminium anodised, barrel tower bolts of extruded Section, size 100mm long and fixed, complete all as specified and as directed by the Engineer-in-Charge.

Supply and fixing Aluminium anodised, barrel tower bolts of extruded Section, size 150mm long and fixed, complete all as specified and as directed by the Engineer-in-Charge.

Supply and fixing Aluminium anodised, barrel tower bolts of extruded Section, size 200mm long and fixed, complete all as specified and as directed by the Engineer-in-Charge.

Supply and fixing mild steel butt hinges, medium weight cold rolled 100 mm size complete all as specified and directed by the Engineer-in-Charge.

Supply and fixing extrued aluminium alloy butt hinges, 100 mm size with galvanised mild steel hinges pin anodised complete all as specified and directed by the Engineer-in-Charge.

Supply and fixing mild steel butt hinges, medium weight cold rolled 75 mm size complete all as specified and directed by the Engineer-in-Charge.

Supply and fixing 300mm long aluminium alloy , anodised sliding door bolt with hasp and staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolt and sliding bolts of extruded section or cast aluminium alloy fixed complete all as specified and as directed by the Engineer-in-Charge.

Supply and fixing Extruded aluminium alloy handles, fabricated type, Anodised, size 100mm complete all as specified and as directed by the Engineer-in-Charge.

Supply and fixing Extruded aluminium alloy handles, fabricated type, Anodised, size 150mm complete all as specified and as directed by the Engineer-in-Charge.

S&F aluminium (dia cast) body door closer hydraulically regulated, designation No 3, universal type, suitable for door shutters of 851 to 1000mm in width and of weight between 61 to 80kg and fixed, complete all as specified and as directed by the Engineer-in-Charge.

Supply and fixing in repairs floor door stopper 140mm long (length of cover plate) aluminium alloy body and tongue anodised with hard drawn steel spring fixed in floor, complete all as specified and as directed by the Engineer-in-Charge.

M&L for Preparation of new plastered or unplastered surfaces of walls and applying two coats of oil emulsion distemper over a coat of chalk whiting , complete all as specified and as directed by Engineer-in-Charge.

M&L for perparation of old surfaces of walls and applying two coats of oil emulsion distemper, complete all as specified and as directed by Engineer-in-Charge.

M&L for Preparation of old wooden surfaces of any description, not otherwise described, over 10cm width/girth and applying one coats of synthetic enamel paint, complete all as specified and as directed by Engineer-In-Charge.

M&L for Preparation of new or previously untreated wooden surfaces of any description, not otherwise described, over 10cm width/girth and applying two coats of synthetic enamel paint over a coat of pink primer, complete all as specified and as directed by Engineer-In-Charge.

M&L for Preparation of new or previously untreated steel surfaces of any description, not otherwise described, over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide or zinc chrome primer complete all as specified and as directed by Engineer-In-Charge.

Preparing zinc or galvanised surfaces to receive painting by coating with mordant or approved solution including washing and cleaning etc;and applying two coats of synthetic enamel paint over a coat of red oxide primer on steel surfaces of any description, not other wise described over 10 cm width or girth complete.

M&L for Form work to sides of square, rectangular or polygonal pillars, posts, struts, piers, columns and stanchions, for rough finished flat surfaces of concrete, complete all as specified & directed by Engr-in-Charge.

Formwork to concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter for rough finished flat surfaces of concrete, complete all as specified & directed.

Form work to soffits of suspended slabs such as roof slabs, floor slabs landings and similar work, not exceeding 200mm thick (horizontal or sloping) for rough finished flat surfaces of concrete, complete all as specified & directed.

Form work to soffits and sides of roof beams, lintel band etc for rough finished flat surfaces of concrete, complete all as specified & directed.

Form work to edges of concrete flats, treads, break in floors, window cills, concrete railings openings in concrete walls, floor and roof and exc. 20cm wide and sides of RCC/PCC bands in walls, horizontal or sloping and similar work exc. 10cm but n. exc. 20cm wide for rough finished flat surfaces of concrete, complete all as specified & directed.

M&L for preperation of newly plastered surfaces of walls and applying two coats of cement base paint complete all as specified and as directed.

M&L for preperation of old plastered wall surface of any description and applayng one coat of cement based paint, complete all as specified and as directed.

M&L for Preparation of new plastered or unplastered surfaces of wall and applying three coats of white wash, complete all as specified and as directed by Engineer-in-Charge.

M&L for Preparation of new plastered surfaces of ceiling and applying three coats of white wash, complete all as specified and as directed by Engineer-in-Charge.

Taking up or down 15 mm bore steel tubing and connections, including cleaning for refixing or removal to store, complete all as specified and as directed by the Engineer-in-Charge.

Taking up or down 20 mm bore steel tubing and connections, including cleaning for refixing or removal to store, complete all as specified and as directed by the Engineer-in-Charge.

S&F 35mm thick second class hardwood (Sal/Hollock) factory made plain framed panelled shutter (two panel) with lock rails & panel of 9 mm B.W.P commercial ply wood or 12 mm thick veneered particle board with commercial veneering on both side. The size of rail and stile as per IS:1003 (Part-I) kiln seasoned and chemically pressure treated complete all as specified and directed.

S&F 30 mm thick 2nd class hard wood (Sal/Hollock)) glazed & skeleton shutters open rebated and prepared to receive glass, gauze etc ( without sash bars), edges of framing plain, chamfered or rounded fitted with cut and mitered beads for securing glass, etc, sizes of members of window shutters as specified in SSR- 2009 Part-I Section 8.24(b) complete all as specified and directed.

S&F factory made solid panel PVC door shutters 30mm thick (style) consisting of frame made out of MS tubes for top and bottom rails. MS frame shall be covered with head moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail and bottom rail on either side & as gap insert for top rail & bottom rail; panelling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles and rails with suitable PVC sheet beading, and joined together with solvent cement, fixing in the frame at site all as per specified and directed by Engr-in-Charge.

Supply & Fixing 15 mm dia polyproplyene random copolymer (PPR) (SDR 7.4 & SDR 11 UV) 3 layer pipe with and including SFMC fitting such as bends elbow, tee short length socket union check nuts nipple etc (female and male as required complete of size 16mm outer dia suitable for hot/cold water supply line including testing complete all as per manufactures instructions and as directed by Engineer-in-charge.

S & F in repairs Wash basin vitreous china flat back of size 630mm x 450mm, including cutting for and pinning in ends of brackets or errecting stand including waste fittings, waste pipes, complete all as specified and directed by Engr-in-Charge.

S&F 10 litres capacity PVC valveless syphonic action type, flushing cistern (ISI marked), low level with inlet, ball valve, float, brackets 45cm long, PVC connection & flush pipe, complete all as specified & directed by Engr-in-Charge.

S&F 3 layer PP-R Polypropylene random copolymer pipes 20mm dia SDR 7.4 & SDR 11 UV stablised and antimicrobial welded having thermal stability for hot and cold water supply including all PP-R plain & brass threaded polypropylene random fittings fixed complete to wall, ceiling or in floors etc, complete all as specified and as directed.

S & F 15mm bore, chromium plated, angular stop cock with wall flanges, complete all as specified and directed by Engr-in-Charge.

S&F 15mm bore stop cock chromium plated, screwed down under high pressure with crutch or butterfly handle, screwed both ends for iron pipe of brass ferrule, complete all as specified and directed by Engr-in-Charge.

S & F in repairs 15mm bore, fancy type stop valve, chromium plated with long shank and cup (concealed type) cast copper alloy, screw down under high pressure with crutch or butter fly handle screwed both ends for iron pipe or for union, complete all as specified and directed by Engr-in-Charge.

S&F 15mm bore, PVC connection pipe 450mm long with PTMT nuts at both ends, complete all as specified and directed by Engr-in-Charge.

Towel Rail 600mm long of PTMT fixed with and including Chromium plated brass screws and wooden/plastic cleats. (Minimum weight 190gms) complete all as specified and directed.

S&F 100mm dia grating doom of PTMT (minimum weight 25 gms), complete all as specified and directed by Engr-in-Charge.

S & F in repairs 15 mm bore bib taps, fancy type Cast Copper alloy, with crutch or butterfly handle, chromium plated, screwed down, screwed for iron pipe or for brass ferrule, complete all as specified and directed by Engr-in-Charge.

S & F in repairs 15 mm bore pillar taps, fancy type Cast Copper alloy, with capstan heads, chromium plated, screwed down high pressure with or without lettered Hot or Cold with long screwed shanks and fly nuts, screwed for iron pipe, complete all as specified and directed by Engr-in-Charge.

S&F liquid soap container of PTMT fixed with and including Chromium plated brass screws and wooden/plastic cleats. (Minimum weight 105gms) , complete all as specified and directed by Engr-in-Charge.

M&L for 75mm thick, PCC 1:2:4, type B-1 (using 20mm graded crushed stone aggregates) as in hardstanding etc., finished even and fair without using extra cement, complete all as specified and directed by Engr-in-Charge.

S&F solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube, complete all as specified and directed by Engr-in-Charge.

S & F vitreous china urinal, full stall type any colour including all fitting, complete all as specified and directed.

S & F vitreous china urinal, half stall type any colour including all fitting, complete all as specified and directed.

Dismantling of cast iron or reinforced concrete 100 mm dia drain pipes, fixed walls or laid in trenches jointed in cement mortar and taking out of trenches, complete all as specified and directed by Engr-in-Charge.

Taking down eaves gutters and rainwater pipes (any size or pattern), including all fittings, heads, shoes, bends, swan-necks, etc., including cleaning or refixing or removal to Store (measured overall as fixed along the centre line over fittings and accessories, complete all as specified and directed by Engr-in-Charge.

S&F 110mm dia PVC (SWR) pipe, single socketed in any length, with rubber ring joints, laid in trenches or in floors, complete all as specified and directed by Engr-in-Charge.

S&F 75mm dia PVC (SWR) pipe, single socketed in any length, laid in trenches or in floors, complete all as specified and directed by Engr-in-Charge.

S&F in repairs viterous China squatting pan or Orissa patten 580 x 440 mm white with integral foot rest (excluding cistern) with front or back inlet and pattern as in repairs incl bedding with PCC 1:2:4, type B-I, (using 20 mm graded crushed stone aggregates), complete all as sepcified and directed by Engr-in-Charge.

S & F in repair Vitreous china wash down water closet (Pedestal pattern), white (EWC) including Plastic seat of same colour of WC and PVC (SWR) P trap 110mm bore, closed patttern with flat bottom, and cover and Mild steel chromium plated hinging device and excluding flushing cistern and flush pipe, complete all as sepcified and directed by Engr-in-Charge.

S & F 500 litres capacity rotational moulded polyethylene water storage tanks with cover (Cylindrical vertical, with closed top), hoisted and fixed in position all as specified in SSR Part I including taking down old one as directed, complete all as specified and as directed.

S&F rotational moulded polyethylene water storage tank (cylinderical vertical with closed top) hoisted and fixed in position all as specified in SSR Part - I of capacity 1000 ltrs including all accessories, complete all as specified and directed by Engr-in-Charge.

S&F rotational moulded polyethylene water storage tank (cylinderical vertical with closed top) hoisted and fixed in position all as specified in SSR Part - I of capacity 2000 ltrs including all accessories, complete all as specified and directed by Engr-in-Charge.

S&F 20mm ball brass valve, high pressure with polythene float and fly nut, screwed for iron/PPR pipe and fixed in repairs, complete all as specified and directed by Engr-in-Charge.

Dismantling roof tiles or roof treatment of any description including cement mortar, bedding (But not backing) and rubbish of premises, complete all as specified and directed.

Roughening surfaces of old concrete floor by picking, sweeping clean and washing down with water to remove dust etc, complete all as specified and as directed.

M&L for 10 mm thick screed bed over roof concrete surface works finished even and smooth without using extra cement in cement mortar 1:4, complete all as specified and as directed.

M&L for brushing neat cement slurry with 3.0 Kg of cement per Sq.meter, complete all as specified and directed by Engr-in-Charge.

M&L for applying evenly a tack coat of industrial bitumen 85/25 at the rate of 1.2 Kg per Sqm including cleaning surface and applying APP based polymeric membrane minimum weight 3 Kg / Sqm and minimum 3 mm thick reinforced with polyester non woven fabric (weight not less than 150 gms/ Sqm) laid on primed surface by forced application, complete all as specified and directed by Engr-in-charge.

M&L for soakage wells excavation of size 3.0 M dia and 3.0 m effective depth, in any type of soil, foundation in PCC 1:3:6 wall of honey combed masonry with top ring of M 25 concrete including intercepting chamber and screen chamber made of brick masonary in CM, RCC cover slab in M25/SFRC cover, interconnecting pipes of RCC/DWC (Refer TD drawing No CESZ/TD-01/2015 Sheet 1/3 to 3/3) complete filled with brick bats, complete all as specified and as directed.

M&L for soakage wells excavation of size 1.8 M X4.50 M, in any type of soil, foundation in PCC 1:3:6 wall of honey combed masonry with top ring of M 25 concrete including intercepting chamber and screen chamber made of brick masonary in CM, RCC cover slab in M25/SFRC cover, interconnecting pipes of RCC/DWC (Refer TD drawing No CESZ/TD-01/2015 Sheet 1/3 to 3/3) complete filled with brick bats of size as directed by engineer in charge, complete all as specified and as directed.

M&L for soakage wells excavation of size 1.2 M X 1.5 M in any type of soil 1.2 M dia X 1.5 M foundation in PCC 1:3:6 wall of honey combed masonry with top ring of M 25 concrete including intercepting chamber and screen chamber made of brick masonary in CM, RCC cover slab in M25/SFRC cover, interconnecting pipes of RCC/DWC (Refer TD drawing No CESZ/TD-01/2015 Sheet 1/3 to 3/3) complete filled with brick bats of size as directed by engineer in charge, complete all as specified and as directed.

Supply only integral water proofing compound, complete all as specified and as directed.

Demolition and breaking up drain pipe (Salt glazed ware, AC or Reinforced concrete) set in cement mortar including the pipe inserted in manholes wall for 150 mm drain pipes , removal of rubbish outside MD land , complete all as specifed & directed.

Demolition and breaking up drain pipe (Salt glazed ware, AC or Reinforced concrete) set in cement mortar including the pipe inserted in manholes wall for 200 mm drain pipes , removal of rubbish outside MD land , complete all as specifed & directed.

S&F salt-glazed stoneware drain pipe, internal dia of pipe 150mm,laid in trenches and jointed, complete all as specified.

M&L for concrete 1:3:6, type C-2 (using 40mm graded crushed stone aggregates) as in bed to 150mm dia drains pipes incl packing under and haunching against the sides of pipes after they are laid and tested for, complete all as specified and directed.

M&L for concrete 1:3:6, type C-2 (using 40mm graded crushed stone aggregates) as in bed to 200mm dia drains pipes incl packing under and haunching against the sides of pipes after they are laid and tested for, complete all as specified and directed.

M&L for laying reinforced concrete pipes of 150 mm internal dia pipes of grade 'A' laid in trenches and jointed, complete all as specified and as directed.

M&L for laying reinforced concrete pipes of 200 mm bore, class NP-2 laid and jointed complete with collars, complete all as specified and as directed.

S&F PVC (SWR) rain water pipe 110 mm bore in any length with rubber joints fixied to wall, complete all as specified and as directed.

S&F PVC (SWR) rain water pipe 75 mm bore in any length with rubber joints fixed to wall, complete all as specified and as directed.

Desilting/ desludging/ cleaning of man holes of any size n. exc 1.5 m in depth and removing all blockage from manholes such as plastic pieces, soil etc, complete all as specifed & directed.

All as per item No.133.00 But exc 1.5m and not exc 3.00 in depth, complete all as specified and as directed.

M&L for pumping and bailing out sludge and alike components from septic tanks, soakage pit and alike and removing the same to out side MD land, complete all as specified and as directed.

S&F 110mm dia PVC (SWR) bend with access door any radius, complete all as specified and directed by Engr-in-Charge.

S&F 75mm dia PVC (SWR) bend with access door any radius, complete all as specified and directed by Engr-in-Charge.

S&F 110mm dia PVC (SWR) vent cowl, complete all as specified and directed by Engr-in-Charge.

S&F 75mm dia PVC (SWR) vent cowl, complete all as specified and directed by Engr-in-Charge.

S&F 110mm dia PVC (SWR) branch pieces (equal or unequal 'T'), complete all as specified and directed by Engr-in-Charge.

S&F 75mm dia PVC (SWR) floor trap, plain with grating including jointing with solvant cement, complete all as specified and directed by Engr-in-Charge.

S&F 125/110mm dia PVC (SWR) 'P' trap, complete all as specified and directed by Engr-in-Charge.

S&F 40mm LDPE pipe of pressure rating 6 Kgf/cm2 fixed complete to wall ceilings or in floors, complete all as specified and directed.

S&F steel water tubing medium grade galvanised of 15 mm bore with all fittings and fixtures fixed to wall and ceiling or laid in floor/trenches complete all as specified and directed.

S&F steel water tubing medium grade galvanised of 20 mm bore with all fittings and fixtures fixed to wall and ceiling or laid in floor/trenches complete all as specified and directed.

S&F Gun metal globe or gate valves with iron wheel head screwed both ends for iron pipe and fixed of 20mm dia, complete all as specified and directed by Engr in Charge.

Cutting into existing manholes (or connecting new drains, making good to pipe and rendering cutting out existing benching for and forming branch ckannel (1/2 round or 3/4 section) in cement concrete 1:2:4 type B-1 smooth finished, and reforming benching as required. dia of pipe 100 mm. complete all as specified and directed.

M&L for point wiring controlled by one switch, of any length as per site requirement with PVC FRLS insulated unsheathed copper conductor cable of size 1.5 Sqmm including earth wire of size 1.5 Sqmm and including PVC casing and capping of 20mm size and quality fixed on walls/ceiling excluding MS sheet box and modular sheet top cover for mounting switches /sockets etc., for one light/fan/exhaust fan point controlled by one switch 5Amp, one way, complete all as specified and directed by Engr-in-Charge.

All as per description of srl item No 148.00 above but for 5 Amp switch socket combination in independent board, complete all as specified.

All as per description of srl item No 148.00 above but for 5 Amp switch socket combination in same board, complete all as specified.

Supply and Fixing switch socket outlet 2 in 1, 3 pin, 5 Amps, 240 Volts flush type complete all as specified and as directed.

Supply and Fixing switch piano, flush type, single pole, one way, 5 Amps, complete all as specified and as directed.

Supply and fix decorative durable LED batten fitting 18 Watt, 4 feet long with decorative and caps, powder coated CRCA decorative for LED tube 1x18 W LED including LED retrofit, 4 feet long ( white colour) tube of 18 watt having driver connector block etc complete with all accessories prewired and connecting electrically to ceiling rose using PVC insulated and overall sheathed flexible copper conductor cable of size 0.75 sqmm 3 core , complete all as specified and directed by Engr in Charge. Make: Havells /Crompton / Philips/ Bajaj/Wipro

Supply and fixing LED lamp, 10 Watt, 230 volts, 50 Hz, AC, complete all as specified and directed by Engr in Charge. Make: Havells/ Crompton / Bajaj

Supply and fixing bulk head light 12/10 Watt, 230 volts 50 Hz AC, complete all as specified and directed by Engr in Charge. Make: Havells/ Crompton / Bajaj

S&F ceiling rose surface bakelite 65x50 mm two to three terminals complete all as specified and directed by Engr in Charge.

S&F lamp holder insulated body with back plate suitable for batten fittings complete all as specified and directed by Engr in Charge.

S&F sheet metal enclosure SPN for DBs with 200 Amps rated bus bar of 4 way 240 volts with blank plate double door, complete with metal double door all as directed by Engr-in-Charge.

S&F sheet metal enclosure SPN for DBs with 200 Amps bus bar of 4 way 240 volts with blank plate double door, complete with metal single door all as directed by Engr-in-Charge. Make : Legrand/Indo Asian/L&T/Havells.

S&F MCB double pole, 20 Amps 240 volts, complete all as specified and directed by Engr in Charge.

S&F MCB double pole, 40 Amps 240 volts, complete all as specified and directed by Engr in Charge.

S&F MCB single phase (SP), 6 to 32 Amps 240 Volts 'C' curve, complete all as specified and directed by Engr in Charge. Make : Legrand/Indo Asian/L&T/Havells.

Supply and Fixing PVC plastic body exhaust fan of size 250/225 mm sweep with louvers complete including PCC and plywood packing work, complete all as specified and directed. Make: Orient/Havells/Bajaj.

S&F 1100 volts grade heavy duty cable PVC insulated aluminium conductor 6 sqmm 2.0 core served with inner sheathing of PVC tape and overall PVC sheathed in service connections suspended by insulating hangers not more than 1 m apart including 4mm dia suspension wire, one twin core cable flat or circular, complete all as specified.

3-layer PP-R (Polyprolylene random copolymer) pipe SDR 7.4 (PN 16) SDR 11 UV stablised and antimicrobial fusion welded having thermal stability for hot & cold water supply including all PP-R plain & brass theraded polypropylence random fittings laid in trenches of size 63mm outer dia including jointing and fixing material such as solvent adhesive SR-998, complete all as specified and as directed.

S&F 1100 volts grade heavy duty cable PVC insulated aluminium conductor 4 sqmm served with inner sheathing of PVC tape and overall PVC sheathed in service connections suspended by insulating hangers not more than 1 m apart including 4mm dia suspension wire, one twin core cable flat or circular, complete all as specified.

Mehar Enterprises

R B TRADERS

VIJAY ENTERPRISES