WELCOME MAINT INCL MISC B/R REPAIR WORK TO MD OFFRS ACCN AT MANEKSHAW MARG, URBAN VILLAGE, CASSEL ROAD IN THE AOR OF AGE B/R-I UNDER GE (EAST) DELHI CANTT-10

Amount

Taking down chowkats or frames with shutters (without taking off shutters from the frames) not exc. 1.5 Sqm each complete all as specified and directed.

Taking down chowkats or frames with shutters (without taking off shutters from the frames) exc. 1.5 sqm but n.exc 4 sqm each complete all as specified and directed.

Taking down shutters of any description not exceeding 2.00 Sqm each complete all specified and directed.

Taking down shutters of any description exceeding 2.00 Sqm each complete all specified and directed.

Refixing doors shutters in same opening any description n exc 2.0 sqm. complete all specified and directed.

Refixing doors shutters in same opening any description exc 2.0 sqm. complete all specified and directed.

Dismantling steel work including doors, gates etc., complete all as specified & directed.

S & F framed work such as in door frame, door shutters / gate of angel or other section with gusset plates, rails, braces, etc complete , drilled for fixing of steel sheeting or other covering. Doors, etc to be prepared for hanging or sliding with and including either hooks and hings or steel hanging door fittings, including hings hold fast of Fe 410-W (Gde E-250 quality 'A') etc complete all as specified.

S&F flush door shutter 35 mm thick solid core construction with Block board and plywood face panels, commercial type on both sides. complete all as specified and as directed.

S&F 35 mm thick second class hard wood glazed and skelton shutters open rebated and prepared to receive glass, gauge etc (without sash bars) edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc sizes of members of shutters as specified in SSR Part -I section 8 clause 8.24 (a) supplied and fitted to chowkats

S&F Plain framed panelled shutters of second class hard wood 35mm thick (any number of panels) with lock rails and panels of 9mm thick BWP commercial ply or 12mm veneered parcticle board with commercial veneering on both faces. The size of rails and stile as per IS:1003 (Part-I) Kiln seasoned and chemically pressure treated) complete all as specified and as directed.

S&F solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube complete all as specified and directed.

S & F Factory made solid panel PVC door/cup board shutter 30 mm thick (style) consisting of frame made out of M.S tubes for top & bottom rails. M.S frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement or stiles and plain colour PVC sheets for top rail, lock rail and bottom rail on either side and as gap insert for top rail and bottom rail. Panelling of plain colour PVC sheet to be fitted in the M.S frame welded/sealed to the stiles and rails with suitable PVC sheet beading and joined together with solvent cement, suippling and fixing in the frame at site as per specification in SSR Part-I. complete all as specified and directed by Engr-in-Charge.

S & F Anodised aluminium frame for doors, windows, ventilators, partations, AC provision window frame with or without three track, three track window frame etc with Powder Coating (minimum thickness of powder coating 50 micron) with one or more rebates including joining cleat for fixing etc. complete all as specified (Note : Design and pattern for any type window/door/ventilator etc frame as required as approved by GE )

S & F Anodised aluminium door shutters, powder coating of any colour, aluminium section weighing 0.55 kg/ m including necessary joining cleats, glazing clips, ruber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminum snap beading screws etc. complete all as specified (Note : Glass /wiremesh/partical board/ACP board etc any type shall be measured and paid separately)

S & F Anodised aluminium window and ventilator shutters, powder coating of any colour, side hung type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 no.). hinges type B-21 100mm long (2 no.) suitable handle (1 no.) complete all as specified (Note : Glass / wiremesh etc any type paid separately)

M&L Aluminium alloy powder coated windows Three track three panels sliding window with fly proof S.S wire mesh shutter (Two nos. glazed & one no. wire mesh panels) including aluminum powder coated frames sliding track, bottom , sides and top weight not less than 0.75 Kg/ RM, double rebated and 0.40 Kg/RM for window shutter sliding type with aluminium sections as per series-B (18mm) 3 track of Jindal section and equivalent in others, numbers for sliding windwos with framed shutter including aluminium allow powder coated snap type beads handles with locking arrangement spring action and glazing clip joint cleats rubber gaskets etc including all standard fittings, complete all as specified and as directed (Note : Glass / wiremesh etc any type shall be measured and paid separately)

S & F in repair 12 mm thick prelaminated particle board, exterior grade, prelaminated both side with decorative choice laminations, fixed with aluminium partations, door, cupboard etc complete all as specified and as directed. .

M&L 18/19 mm thick prelaminated particle board, exterior grade, prelaminated both side with decorative choice laminations , fixed with SS screws to hinges and timber/steel frame work for kitchen cupboards , shelves, including tape on edge's & including taking down old any type cupboards , shelves etc all as specified and directed.

M&L horizontal & vertical shelves/ partations /sides/ top/ bottom/back sides etc for Modular kitchen cabinet/ wardrobe/ cupboard/ drawers made out of 17/18 mm thick HDHMR boards with white laminated colour on both sides, of approved quality including paste to all exposed edge by edge Banding Tape including provision of cabinet for keeping baskets/ drawers etc and including taking down old any type cupboards , shelves etc all as specified and directed. (Design and pattern as approved by GE) (Make : Action tesa or equivalent)

M & L front side /all exposed sides of Modular kitchen cabinet/ wardrobe/ cupboard/drawers made out of 17/18 mm thick HDHMR boards with glossy mat colour laminate on both sides of approved quality and including paste to all exposed edge by edge Banding Tape and including provision of cabinet for keeping baskets/ drawers etc, including aluminium G/C/J profile handles and stainless steel handle for front face as required and etc and including taking down old any type cupboards , shelves etc all as specified and directed. (Design and pattern as approved by GE). (Make : Action tesa or equivalent)

S & F soft closing hinges in door/ cup board shutters complete (Make:- Godrej/ Hettich/Kaff and make as per approved make list and as approved by GE).

S&F 18 inch (45cm) telescopic channel, rollers for smooth sliding of drawers modular kitchen etc complete all as specified and directed (Make :- Godrej/Hettich)

All same as per srl item No 23 here-in-before but (50cm)

S&F mild steel butt hinges medium weight cold rolled of size 100 mm complete.

S & F for Fancy type Stainless steel bright polished handles oval type of size 150mm size complete.

S & F 250 mm long Stainless steel bright polished sliding door bolts, plate type, stove with bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate and fixed to door complete all as specified and as directed

S & F 150 mm size Stainless steel bright polished barrel tower bolts,for doors with bright bolt

S & F 100mm size butt hinges stainless steel complete all as specified and as directed.

S & F 150 mm size aluminium anodised, handles cast type anodised complete all as specified and directed

S & F 150 mm size aluminium, anodised, barrel tower bolts of extruded section and fixed complete all as specified and directed.

S&F in repair 300 mm size mild steel ordinary rat & tail rod pattern spring (Helical) including rollar & rollar plate fixed to wooden / MS frame complete all specified and directed.

S & F Continuous (piano) hinges, mild steel, bright finish or electrogalvanised of 30 mm width complele all as specified and as directed.

Supply Stainless steel basket (Perforated Cutlery Basket SS) of size 445mm x 485mm x 100mm made with suitable arrangement for fixing over telescopic channel (Make: Godrej Cat art No 3575 or equivalent in IPSA/Hettich as approved by Engr-in-Charge).

Supply for Stainless steel thali/plate basket of size 445mm x 485mm x 200 mm made of min 4mmdia stainless steel wire of approved quality with suitable arrangement for fixing over telescopic channel (Make: Godrej Cat part No 3441or equivalent in IPSA/ Hettich as approved by Engr-in-Charge).

Supply Stainless steel plain basket of size 445mm x 485mm x 200 mm made of min 4mmdia stainless steel wire and bottom of S S perforated sheet approved quality with suitable arrangement for fixing over telescopic channel (Make: Godrej Cat part No 3892, or equivalent in IPSA/ Hettich as approved by Engr-in-Charge).

Supply Stainless steel two shelf pullout basket of size 150 mm x 450mm x 430 mm made of min 4mmdia stainless steel wire and bottom of S S perforated sheet approved quality with suitable arrangement for fixing, telescopic channel (Make: Godrej Cat part No 2260, or equivalent in IPSA/ Hettich as approved by Engr-in-Charge).

Hacking out old broken glass from wooden frames and steel frame or stone, concrete or brick surrounds , glazed with putty or fixed with beads.

S & F 3 mm thick sheet glass , ordinary quality and glazed with oil putty in square n. exc 0.5 Sqm in each pane fixed complete all as specified and directed.

S & F 3 mm thick figured glass , pin head type and glazed with oil putty in square n. exc 0.5 Sqm in each pane fixed complete all as specified and directed.

S & F 5 mm thick sheet glass , ordinary quality and glazed with oil putty in square n. exc 1 Sqm in each pane fixed complete all as specified and directed.

S & F stainless steel wire cloth 0.36mm normal dia of wire and average with a aparture 1.40mm and fixed with tinned tacks or stainless steel wire staples as specified and directed.

S & F in repair stainless steel wire cloth 0.36mm normal dia of wire and average with a aparture 1.40mm and fixed with tinned tacks or stainless steel wire staples as specified and directed.

All same as per srl item No 43 here-in-before but with screw or revets and provision of new flat iron beads of size 12 x 5mm complete to steel window. (Note: Removal of steel window incl refixing in the same location where necessary shall deemed to be included in unit rate quoted incl cutting and welding)

Providing services on related to welding & black smith work for reapir to steel windows, shutters , grills , doors , rolling shutters, and other steel works etc including taking down, easing and refixing in the same position as required etc complete all as specified and directed. Note- (1).The above task shall be carried out by deploying minimum 01 welder having black smith skills on day basis From 900 hrs to 1700 Hrs. (2) In case contractor fails to complete the above task as per scheduled programme a recovery of Rs 500/- per day shall be deducted from his payment. (3) Necessary T&P, ladders,minor consumable viz welding rods/extras, welding machine , uipments and safety gear shall be provided by the contractors. (4) All replacement material/ accessories/Items as required shall be issued from MES store to complete the task and dismantled old unserviceable material shall be deposited to MES store yard. (5) The above work /task will also include for High rise bldgs and shaft area of high rise bldgs.

M&L Coloured Glazed ceramic tiles/ vitrified tiles in floor / wall , in patches , area n. exc 5 sq.m. including taking down and removing and cleaning old tiles, preparing beds and laying or setting, jointing with neet cement slurry and pointed in white or colour cement to match new tiles with existing tiles over backing coat of 10mm thick rendering CM (1:4) / 15mm thick in CM 1:6 complete all as specified and directed.

S&F Anodised aluminium grill (anodised transparent or dyed to required shade according to IS: 1868 with minimum anodic coating of grade AC 15) of approved design/pattern, with approved standard section and fixed to the existing window frame with C.P. brass/ stainless steel screws @ 200 mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening, all complete as per requirement and direction of Engineer-in- charge. etc complete all as directed.

M&L Framed work such as grills, gratings etc with ends of bars shouldered and / or riveted or forged into spikes, framed guard bars, barred iron doors, ladders, framed balusters, walk ways, railings, frame work of water tanks and similar work .

S & F magnetic catches for cupboard , shelves, etc

S & F 50 mm size cup board locks of brass including keys set, grade I, 2 lever complete.

S & F for stainless steel 125mm long cupoard handles.

S & F in repair stainless steel Curtain Rod 25 mm dia with finials.

S&F in repair stainless steel fancy type bracket for curtian rod.

S&F in repair aluminium door seal brown/white coated with PVC brush or PVC flexible door rubber fitted in bottom complete.

S & F in repair Aluminium extruded section body Door closer hydraulically regulated, designation No. 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed

M & L for preparation of internal old decorated brick/ concrete /plastered/un-plastered surfaces of walls, pillers, cornices etc by brooming down or steel wire brushing, scrapping down smoke soot, moulds, moss, efflorescent salts, trading oil and greasy spots including cracks/ holes in surface filling with white putty etc to receive treatment complete all as specified and directed.

M & L for preparation of old decorated concrete /plastered/un-plastered surfaces of ceiling / bottom of roof slab etc by brooming down or steel wire brushing, scrapping down smoke soot, moulds, moss, efflorescent salts, trading oil and greasy spots including cracks/holes in surface filling with white putty etc to receive treatment complete all as specified and directed.

M & L for preparation of internal new surface of plaster/concrete surface of walls, pillers, cornices etc to receive treatment complete all as specified and directed.

M & L for preparation of new surface of plaster/concrete surface of ceiling / bottom of roof slab etc to receive treatment complete all as specified and directed.

M & L for complete removal of existing internal/external any type of treatment including preparation of old decorated brick/ concrete /plastered/un-plastered surfaces of walls, pillers, cornices etc by brooming down or steel wire brushing, scrapping down smoke soot, moulds, moss, efflorescent salts, trading oil and greasy spots including cracks/holes in surface filling with white putty etc to receive complete all as specified and directed.

M & L 2mm thick water proof wall care putty on new / old any type of surface of wall/ ceiling including sand papering thus making surface even & smooth etc and prepare to receive complete.

M & L for one coat of interior wall primer as on new / old prepared any type surface/ wall putty surface on wall/ ceiling etc, as per manufacturer's specification complete all as specified and directed

M & L for one coat of oil bound distemper, using roller brush , applying on any type of prepared surface of walls, pillers, cornices etc complete all as specified and directed.

M & L for one coat of oil bound distemper, using roller brush , applying on any type of prepared surface of ceilings/ bottom of roof slabs etc complete all as specified and directed.

M & L for two coat of oil bound distemper, using roller brush , applying on any type of prepared surface of walls, pillers, cornices etc complete all as specified and directed.

M & L for one coat of distempering with 1st quality acrylic distemper (ready mixed) (interior) of approved manufacturer, of required shade and colour , as per manufacturer's specification and using roller brush, applying on any type of prepared surface of walls,ceiling, pillers, cornices etc complete all as specified and directed.

M & L for two coat of distempering with 1st quality acrylic distemper (ready mixed) (interior) of approved manufacturer, of required shade and colour , as per manufacturer's specification and using roller brush, applying on any type of prepared surface of walls,ceiling, pillers, cornices etc complete all as specified and directed.

M & L for applying one coat of synthetic enamel paint including preparation of old wooden surfaces of any description over 10 cm width or girth and complete all as Specified and directed.

M & L for applying one coat of synthetic enamel paint including preparation of old steel surfaces of any description over 10 cm width or girth and complete all as Specified and directed.

M&L for applying Two coat of synthetic enamel paint (finishing coat) over one coat of pink primer to new wood surfaces of any description over 10 cm width or girth incl prepration of surfaces complete all as specified.

M & L 25 mm Thick PCC type B-0 1:2:4 (12.5mm graded aggregate) as in flooring, under Tiles and etc including demolition old existing any type PCC etc all as specified and directed

M & L Vitrified ceramic tiles size 600 x 600 x 8 -12 mm thick(square/rectangular), ( shade/ colour/ Design/ pattern as approved by GE) ,as in floors & skirting etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of the tiles laid over and including 15 mm thick avg screed bed in CM 1:6 in floor or 10 mm thick rendering in CM 1:4 in skirting and including dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and dirtected by Engr-in-Charge

M & L Coloured non skid ceramic tiles 7 to 8 mm thick (Square/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc, set and jointed in neat cement slurry and pointed in white or Coloured cement to match laid over and including 15 mm thick avg screed bed in CM 1:6 and including dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and dirtected by Engr-in-Charge

M & L Coloured Glazed ceramic tiles size 600 x 300 x 7-8 mm thick, in vertical surface such as skirting, dados ,etc, set and jointed in neat cement slurry and pointed in white or Coloured cement to match and over and including 10 mm thick rendering in CM 1:4 and including dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and dirtected by Engr-in-Charge

M & L for 18 to 20 mm thick granite (of any type) work( table rubbed and polished) in jambs, pillars, window cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite slab over and including 15 mm thick screed bed in CM 1:4 including rounding to edge of granite as per required and including dismantling of existing granite of any description including cement mortar bedding (but not backing ) and rubbish off the premises complete all as specified and directed.

S&F steel water tubing galvanised 15mm bore medium grade fixed to walls, under floors and on ceiling surfaces , including cutting chases , pipning in making good to facings where required and pointing in Cement mortar 1:3 for concealed water tubing or conduit pipe etc and including taking up or down old steel tubing 15 mm bore and connecetions in any postion etc complete all as specified and directed.

S&F steel water tubing galvanised 20 mm bore medium grade fixed to walls, under floors and on ceiling surfaces and including taking up or down old steel tubing 20 mm bore and connecetions in any postion etc complete all as specified and directed.

S&F in repair 15mm angle valves chromium plated fancy type cast copper alloy, polished body screwed down, high pressure, fixed to pipe steel tubing complete all as specified & directed. (Make: Jaquar/ Marc/ Kohler)

S & F in repairs 15 mm bore bib tap (long body) ,fancy type chromimum plated screwed down high pressure fixed to pipe steel tubing complete all as specifed and directed. (Make: Jaquar/ Marc/ Kohler)

S&F in repair Brass CP Basin mixer central hole for making hot and cold water fixed as per manufacturers manual with long shunk and cup washers, screwed both ends suitable for 15mm bore GI Pipe joints to GI pipes or unions, complete all as specified and directed. Make : Jaquar Continental CON-CHR-167KNB and equivalent in Marc/ Kohler

S&F in repair brass chromium plated wall mixture 3 in 1 system with L- bend provision for over head shower and suitable for 15mm bore GI pipe including three joints to steel pipes or unions and plugging and screwing to walls all as specified and directed. Make : Jaquar Continental CON-CHR-273KNUPR and equivalent in Marc/ Kohler

S&F in repair Brass CP sink mixer with swinging spout (wall mounted model with connecting legs & wall flangesfor making hot and cold water fixed as per manufacturers manual with long shunk and cup washers, screwed both ends suitable for 15mm bore GI Pipe joints to GI pipes or unions, complete all as specified and directed. Make : Jaquar Continental CON-CHR-309 KNM and equivalent in Marc/ Kohler

S & F in repair 15 mm bore two way bib cock with wall flange cast copper alloy , fancy type , chromium plated, screwed for iron pipe or for brass ferrule complete all as specified and directed. Make : Jaqaur Cat Part No. ARI-39041 and equivalent in Marc/ Kohler)

S & F in repair 65 x 95 mm rectangular shape single flow hand shower ( body & face plate stainless with ABS body in chrome finish) with rubit cleaning system including flexible pipe and fixed complete all as specified and as directed. (Make : Jaquar cat part No HSH CHR 1657 and equivalent in Marc/ Kohler)

S & F in repair PVC connections 15mm size with PTMT nuts of length 450mm.

S & F in repair PVC connections 15mm size with PTMT nuts of length 600 mm.

S & F in repair Designer type high quality fancy type looking mirror of size as approved by Engr-in-Charge 8-10mm thick, fixed to wall with stainless steel studs, screws, brackets and washers etc complete all as specified and as directed.

S&F in repairs Hand Shower (Health Faucet) with 8 mm Dia, 1 Meter Long Flexible Tube & Wall Hook completed all as specified (Make : Jaquar Cat part No. ALD-CHR-573 or equivalent in Marc/ Kohler)

S & F in repair SS soap dish, fixed in repairs, complete all as specified and as directed. (Make: Jaquar/ Marc/ Kohler)

S & F in repair Stainless steel Grating dome 110/125 mm dia with or without hole for waste pipe, fixed in repairs, complete all as specified and as directed.

S & F in repair Stainless steel Grating dome 75 mm dia with or without hole for waste pipe, fixed in repairs, complete all as specified and as directed.

S & F in repair CP Towel Ring Round with Round Flange fixed in positon with and including chromium plated brass screws and wooden/plastic cleats, complete all as specified and as directed. (Make: Jaquar/ Marc/ Kohler)

S&F in repairs of CP towel rail 600mm long fixed with and including chromium plated brass screws and and wooden/plastic cleats (minimum weight 190 gms) fixed on walls, complete all as specified. (Make: Jaquar/ Marc/ Kohler)

S & F in reapir CP shower rose fancy type 150 mm x 150mm size with 300 / 600 mm long shower arm, fixed in repair to 15mm bore pipe, complete all as specified and as directed. (Make: Jaquar/ Marc/ Kohler)

S&F in repairs of 32mm brass chromium plated bottle traps for wash basins with inlet and outlet screwed for pipe or connections including necessary packing, unions and cap and fixed, complete all as specified and directed.

S & F 32/40mm spring type PVC waste pipe fixed toWHB and sink (Note minimum length of each pipe should not be less than 0.80RM), fixed in repairs, complete all as specified and as directed.

S&F in repair sinks with drainage board made of stainless steel 1 mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm including 40 mm waste fittings, brass chromium plated with long screwed shanks and fly nuts flange end bedded in red lead cementand other end fixed etc all as completed and specified.

S & F in reapir stainless steel kitchen plate rack minimum size 900 mm x 750 mm x 200 mm including fixing on wall etc (Make: Jaquar/ Marc/ Kohler)

S & F in repairs Sheet glass corner shelf assembly consisting of 5.5mm thick sheet glass Min size 300 mm x 300 mm with chromium plated bracket guard and railing complete all as specified and as directed. (Make: Jaquar/ Marc/ Kohler)

S & F in repairs Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60 cm long complete all as specified and as directed. (Make: Jaquar/ Marc/ Kohler)

S & F in repair Toilet paper Roll Holder with Stainless Steel Flap, and including chromium plated brass screws and wooden/plastic cleats, complete all as specified and as directed. (Make : Jaquar Cat part No. ACN-CHR-1153Sand equivalent in Marc/ Kohler)

S & F in repair full pedestal pattern wash hand basin with pedestal , size of basin 58 × 43.5 × 82.5 cm as approved by GE including brakets , chromium plated brass waste coupling , waste pipe etc complete all as specified and as directed. Make : HindwareTango Full Pedestal Wash Basin Cat part No. 10086 and equivalent in jaquar /Parryware Cera)

S&F in reapir Vitreous China wash basin, white, flat back, size 550 x 400 mm including , chain and plug but including brackets or erecting stand including & (32 mm -45 gms/40mm-60 gms ) waste coupling of CP complete all as specified and dirtected by Engr-in-Charge .

S & F in repair Vitreous China wash down pedestal pattern EWC, white and including with PVC (SWR) ' S' Trap/P-trap , including seat cover with connection to drain and to flushing pipe antisyphonage pipe, and making good to floor complete all as specified and directed.

S&F in repair Plastic water closet seat cover, back, closed pattern with flat bottom , and cover and mild steel chromium plated or aluminised hinging device complete all as specified and directed.

S & F in reapir Vitreous china wash basin counter oval type size 600x425x195mm, under granite slab with all fitting and fixture complete all as specified and as directed. (Make : Jaquar / Hindware/Parryware/cera)

S&F in repair 10 Ltrs capacity PVC valveless symphonic action type flushing cistern white low level with inlet, ball valve float handle including bracket etc complete all as specified and directed

S & F in repair flush pipe of polyethylene of low or high density or PVC 32 mm dia for low level cistern complete all as specified and directed.

S & F in repair 100 /110 mm dia PVC floor trap , with SS grating including jointing to waste pipe fixed in cement concrete type B1 (1:2:4)

S & F in repair 75 mm dia PVC floor trap , with SS grating including jointing to waste pipe fixed in cement concrete type B1 (1:2:4)

S & F in repair 110 mm PVC (SWR) pipes single socketed in any length with rubber ring joint laid in trenches or in floor or in wall completed all as specified and directed (Note : Pipe work executed in saft area upto the 10 story building also )

S&F repair 75 mm bore PVC (SWR) pipes single socketed , in any length with rubber ring joints ,laid in trenches or in floor or in wall complete all as specifed and directed.(Note : Pipe work executed in saft area upto the 10 story building also )

S & F repair 110 mm PVC (SWR) bends with acess door completed all as specified and directed

S & F repair 75 mm PVC (SWR) bends with acess door completed all as specified and directed

M & L for 15 mm thick rendering in cement mortar 1:6 on fair face of stone walls/brick walls/ concrete surfaces and finished even and fair in any position incl scafolding as required etc and including taking down cement or cement lime plaster , any description on brick or stone walls/concrete surface etc including racking out joints, hacking for key, scrubbing down with water complete all as specified and as directed.

M & L rendering 10 mm thick on fair faces of concrete or concrete surface in ceiling / bottom of roof slab/ chajja etc in CM 1:3, finished even and fair in any position incl scafolding as required etc,and including taking down cement or cement lime plaster , any description on concrete surface in ceiling / bottom of roof slab/ chajja etc including raking out joints, hacking for key, scrubbing down with water complete all as specified and as directed.

NOTE:- (a) The work mentioned in above items shall be carried out including in multi storied buildings (G+8) which may require scaffolding or Jhulla arrangements or any other T&P items are included in the quoted rates by the contractor. (b) Laying GI/PVC drain pipes to be carried out from top of roof slap up to bottom of bldg floor wise through shaft area and as per site requirement and as directed by Engr-in-Charge. (c) All debris obtained from demolition item shall be removed from the site at daily basis and remove the debris out of the MoD land.

A R construction

POONAM ENTERPRISES

R. S. Associates

Akhil Enterprises

STAR CONSTRUCTION CO

Gaurav India Corporations

garnet engineers contractors

Vipul Construction

M/s Sree Baba Traders

S GOURAV PRAKASH ENTERPRISES