Construction of Veterinary Dispensary at Janglote (Balance work)

Amount

Earth work excavation in all kinds of soil by manual or mechanical means (Hydraulic excavator) in foundation trenches, drains, pipes and cables etc. ( not exceeding 1.5 m in width or 10 sqm on plan) incl. dressing of sides & ramming of bottoms, lift upto 1.5mtr. incl. disposal or filling of excavated earth as per the directions of Engineer-in-charge .

Providing and laying in position cement concrete 1: 5:10 (1 cement : 5 coarse sand : 10 graded crushed stone aggregate 40 mm nominal size) of specified grade excluding the cost of centring and shuttering including all leads, lifts and carriage of material by MT / H.L.- All work upto plinth level.

Providing and laying in position cement concrete of specified grade excluding the cost of centring and shuttering including all leads, lifts and carriage of material by M.T/ H.L.- All work upto plinth level. 1:3:6 (1 cement : 3 coarse sand : 6 graded crushed stone aggregate 20 mm nominal size)

Providing and laying cement concrete 1: 3: 6 (1 cement : 3 coarse sand :6 graded Crushed stone aggregate 20 mm nominal size) in retaining walls, return walls, walls (any thickness) including attached pilasters, columns, piers, abutments, pillars, posts, struts, butteresses, string or laces, courses, parapets, coping, bed blocks, anchor blocks,plain window sills, fillets etc.upto floor V- level, excluding the cost of centering, shuttering and finishing, including all leads, lifts and carriage of material by M.T./HL.

Supplying and laying of good earth at site, including all lead, lift & carriage of material by M.T/H.L etc. complete.

Supplying and laying including digging, carrying by lorry, filling River Bed Material including watering & consolidation in layers to specified lines, camber, grades and cross sections. Finished work including material and labour incl. all leads and lifts, carriage of material by M.T/HL.

Providing and laying in position specified grade of reinforced cement concrete excluding the cost of centring, shuttering, finishing and reinforcement- All work upto plinth level. 1 : 1.5 : 3 (1 cement : 1.5 coarse sand : 3 graded crushed stone aggregate 20 mm nominal size) including all leads, lifts and carriage of material by MT / H.L.

Brick work with F.P.S. bricks of class designation 75 in foundation and plinth including all shapes, leads, lifts and carriage of material by MT / H.L. in cement mortar 1:6 ( 1 cement : 6 coarse sand)

Reinforcement for RCC work including straightening, cutting, bending, placing in position and binding all complete Thermo Mechanically Treated bars including all leads, lifts and carriage of material by MT / H.L.

Centring and shuttering including strutting propping etc and removal of form work for

Foundations, footings, bases of columns etc. for mass concrete

Wall (any thickness) including attached pilasters, buttresses, plinth and string courses etc.

Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% & confirming to IS: 15622 of approved make in all colours and shades, laid on 20mm thick cement mortar 1 :4 (1 cement : 4 coarse sand) including grouting the joints with white cement & matching pigments etc. complete Size of tile 60cm x 60cm incl. all leads, lifts & carriage of material by MT/ H.L.

Tile work in skirting, risers of steps and dado (upto 2m height) over 12 mm thick bed of cement mortar 1:3 ( 1 cement : 3 coarse sand) and jointed with grey cement slurry @ 3.3 kg/sqm including pointing in white cement mixed with pigment of matching shade complete.Marble tiles ( polished Raj Nagar 8 mm thick

Applying priming coat with ready mixed red oxide Zinc Chromate primer of approved brand and manufacture on steel galvanised iron/steel works

Painting with ready mixed synthetic enamel paint of approved brand and manufacture to give an even shade.Two or more coats on new steel work.

White washing with lime to give an even shade old work ( two or more coats).

Removing white or colour wash by scrapping & sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete.

Distempering with dry distemper of approved brand and manufacture (one or more coats) and of required shade on old work to give an even shade.

Finishing walls with water proofing cement paint of required shade. Old work (one or more coats applied @ 2.20 kg/10 sqm).

Providing and fixing G.I pipes complete with G.I fittings , including trenching and refilling etc.( external work)

15 mm dia nominal bore

20 mm dia nominal bore

Providing & fixing white vitreous china pedestal type Water closet ( European type W.C. pan ) with seat and lid,10 litre low level white P.V.C flushing cistern including flush pipe with manually controlled device( handle lever) conforming to IS : 7231, with all fittings and fixtures, complete including cutting and making good the walls and floors wherever required. W.C pan with ISI marked white solid plastic seat and lid incl. all leads, lifts and carriage of material by MT / H.L.

Providing and fixing wash basin with C.I / M.S brackets 15mm C.P brass pillar taps, 32mm C.P brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever required. White Vitreous China. Flat back Wash basin size 450 x 300 mm with single 15mm C.P brass pillar tap

Providing and fixing C.P. brass toilet paper holder complete job

Providing and fixing mirror of superior glass( of approved quality) and of required shape and size with plastic moulded frame of approved make and shade with 6 mm thick hard board backing Rectangular shape 453 x 357 mm

Providing and fixing PTMT towel ring trapezoidal shape 215 mm long, 200mm wide with a minimum distance of 37 mm from wall face with concealed fittings arrangements of approved quality and colour, weighing not less than 88 gms.

Providing and fixing PTMT liquid soap container 109 mm wide, 125 mm high and 112 mm distance from wall of standard shape with brackets of the same materials with snap fittings of approved quality and colour, weighing not less than 105 gms.

Providing and fixing brass bib cock of approved quality.15 mm nominal bore complete job.

Providing & fixing ball valve brass of approved quailty 15mm nominal bore complete job.

Providing and fixing C.P. brass shower rose with 15 or 20 mm inlet 100 mm diameter complete job.

Providing and fixing C.P. brass angle valve for basin mixer and gyser points of approved make conforming to IS : 8931 15 mm nominal bore complete job.

Providing & Placing on terrace at all floor levels polyethene water storage tank ISI: 12701 marked indicating the BIS No with cover & suitable locking arrangements & making the necessary holes for inlet, outlet & over flow pipes without the fittings & the base support for tank sintex. electroplast, star, lotus or equivalent having ISI make.

Providing and Fixing 35 litre capacity Gyser of Jaquar, Mark, Bajaj or equaivalent make including fittings( complete job)

Providing and Fixing Motor Pump of 1/2 HP of Sharp, Bajaj, or equaivalent make including fittings( complete job)

M/S RAJESH KUMAR SHARMA

M/S AJAY KUMAR

M/S PAWAN KUMAR GOVT CONTRACTOR

ANWAR CHOUDHARY GOVT CONTRACTOR

Raghbir Singh