Supply of directional Elevated End/Threshold runway light fittings at S.V. Airport, Raipur.

Amount

Supply of bi-directional elevated high intensity halogen type runway edge light fitting complete with prefocus lamp holder, 200 watt 6.6 A halogen lamp, clear outer prismatic dome, clear inner prismatic lens, lens holding mechanism, ball joint for easy levelling, breakable coupling, central column mounting assembly, gaskets, two pin secondary lead plug suitable for connection with isolating transformer, base plate with 6 nos. M-10 stainless steel bolts, spring & plain washers & other accessories etc. and confirming to particular specification and to meet latest ICAO specifications as required.

Supply of Elevated Omni directional, medium intensity light fittings suitable for Taxiway/Apron Edge Lighting use with LED type lamp complete with lens support mechanism, prefocus lamp holder, lens clamping mechanism, central column assembly, breakable coupling, gaskets, two pin secondary leads, base plate with 6 nos M-10 stainless steel bolts, spring washers and other accessories with omnidirectional Red lens, 1.0 watt 6.6 amps LED lamp, LED electronic assembly etc. and confirming to ICAO requirements as per the enclosed particular specifications.

Supply of Bi-directional inset type high intensity runway edge light fitting i/c clear filters/clear prisms for approach direction and yellow filters/yellow colour prisms on other side as per ICAO Aviation visual aids requirements complete with shallow base and matching body of the fitting, inner body and outer cover made of die cast aluminium complete with 3 Nos. of 105 W, 6.6 Amps pre-focussed reflector halogen lamps complete with connected heat resistant accessories, prisms assembly, optical assembly, "O" ring seal, pressure release test plug, clear lenses and all standard hardware and accessories ready for site installation etc. complete as required. The fittings are required to be mounted on the left side of approaching runway.

Supply of following Filters for End/Threshold lights Fittings

180 degree filter-Red

180 degree filter-Green

Supply of Cast Iron Isolating Transformer housing box, water tight round type, metal container of outside size 330mm dia, height 450mm made of 10mm thick cast iron moulding all round except the top surface, which is 15 mm thick cast iron moulding suitable to receive a light fitting base plate on the top and underground housing associated with transformer, power cable and having 2 holes opposite as per site requirement at the periphery, centre 75mm above bottom surface suitable to receive 50mm dia "B" class GI pipe or HDPE Pipe as required. Another hole at 150mm from the top of the CI Box to receive one no. 15mm dia "B" class GI pipe and check nut as required for drawing of secondary lead cable. The box should have two SS earth bolts of M10 x 30mm tapped inside near the hole (4" away from the hole centre) and having a drain hole at the bottom suitably tapped to receive 15mm dia "B" class GI pipe and having clear opening of 220 mm at the top surface and 6 nos. M10 tapped hole having centre to centre distance of 260 mm to receive fitting base plate and bolts i/c supply of all the hardwares complete as required.

Supply of following type 5KV grade 50 HZ, series type Isolating transformer encapsulated in polyester resin finally moulded in neoprene rubber with primary and secondary connection as specified in particular specifications.

(a) 20A/6.6 A of 200 W

Supply of 2Cx2.5 Sq.mm PVC insulated and PVC sheathed copper conductor flexible cable of voltage grade - 650 volt to be used as secondary lead for runway inset light fittings.

Manish Electricals

AMA Private Limited