RequiredExperience with Government
RequiredOEM Annual Turnover Bid to RA enabled No Recovery Vehicle ( 5 ) ( Under PAC ) Make tatamotors Model tatasa12124x45tmanualrecoveryvehiclebsiv Technical Specifications * As per GeM Category Specification Specification Specification Name Values Bid Requirement (Allowed Values) Certification Product tested and trialed Yes * Product Approving authority Ministry of Home Affiars Ministry of Home Affiars If Others
RequiredPlease specify Product NA * 1/7 Approving Authority Vehicle Certification ARAI/VRDE/ICAT No VANN 0002 * Model No as approved by ARAI/VRDE/ICAT VRDE * Air and Noise pollution to conform to CPCB/CMVR norms Yes Yes All reports for the materials used be provided by manufactures from ILAC/NABL accredited labs/Central Govt Labs to be furnished on buyer's demand Yes * Complete literature
Requiredillustrated diagrams
Requiredlist of spares
Requiredspecial tools etc and operating instructions for the operation and maintenance of the vehicle and accessories should be provided (No of machines + 1) Yes * Declared documents Certificates to be furnished to the buyer on demand Yes * Generic Parameters Recovery Vehicle For CPMF * Engine Capacity 5.883 5.883 - 6.0 Or higher Type of Vehicle Body Chassis Frame Chassis Frame Make of Chassis Tata SA 1212 4X4 * Type of Chassis Chassis with facecowl Chassis with facecowl Chassis Model No (NA for monocoque) Tata SA 1212 BSIV * Type of Recovery Vehicle Mechanical Mechanical Category of Vehicle for which Chassis to be used Medium Capacity Commercial Vehicles Medium Capacity Commercial Vehicles Body Style 5T Recovery Vehicle * Body Options Fixed Side Deck Fixed Side Deck Type of Fuel Diesel * Vehicle Emission Compliance BS-IV BS-IV 2/7 Vehicle Mileage ( as declared by OEM as certified by Test Agency under Rule 115of CMVR 1989) (kmpl) 5.2 More than 5.2 Or higher Speed
Requiredwith full load on road (kmph) 72 72 Engine Power BHP@rpm 160@2500 * Engine Torque Max@ rpm 600@1100-1700 * Engine Aspiration Turbocharged Turbocharged Constructional Parameters No of Cylinder in Engine 6 6 Fuel Tank Capacity 225 More than 225.0 Or higher Length of vehicle 6970 6970.0
Required6970 Width of vehicle 2434 2434.0
Required2434 Height of Vehicle 2800 2800.0
Required2800 Gradeability of vehicle( %) 40.4 More than 40.4 Or higher Step climbing 0 * Ground Clearance 250 More than 250.0 Or higher Wheel Base 4225 More than 4225.0 Or higher Kerb Weight 4890 4890.0
Required4890 Gross Vehicle Weight 12180 More than 12180.0 Or higher No of Axle 2 2 Axle Configuration ( No of Outside Tyre x No of Driving Tyre) 4X4 * Type of Front Axle and Suspension System Salisbury
RequiredSE * Type of Rear Axle and Suspension System Single reduction
RequiredSE * BIS marked Pneumatic Tyres and tubes for both front and rear Yes * Size Of Front Tyres 10.00 – 20 16PR * Size Of Rear Tyres 10.00 – 20 16PR * Tyres with run flat system No No 3/7 Size(Dia) of Wheel 7.5 * Chassis Transmission System Manual Manual Type of Gears Synchromesh Gear Box * No of Speed Forward Gears 6 6
Required10 Type of Wheel drive Four Wheel drive Two Wheel drive
RequiredFour Wheel drive Type of Steering Manual Manual Turning Radius 8800 Less than 8800.0 Or lower Front Vehicle Brake Full Air S-Cam * Rear Vehicle Brake Full Air S-Cam * Type of Clutch Single Plate * Seating Capacity 6 More than 6.0 Or higher Frame Type Ladder Type * No of Side Runner Structural member 1 * Side Panelling MS * No of Cross Member 2 * No of Long Member 2 * Super structure construction details Others * Type Twin Boom Recovery Equipment Twin Boom Recovery Equipment Winch Gear Box Mechnical * Rope Diameter 13 More than 13.0 Or higher Lifting capacity single Boom 5000 More than 5000.0 Or higher Lifting capacity Twin Boom 5000 More than 5000.0 Or higher Max reach on sides 1800 More than 1800.0 Or higher Min Angle of Slew for each boom (degree) 150 More than 150.0 Or higher Mass of crane (where practical) 2500 2500.0
Required2500 Load lifting height 3400 More than 3400.0 Or higher Load Charts Provided * 4/7 Hook approaches Manual approach * Load lifting speed (m/s) 0.055 0.055 Precision load lowering speed (NA/0 for Manual Crane ) (m/s) 0 * Cranes travelling speed with and without loads (m/s) 20 * Cranes traversing speed (NA/0 for Manual Crane ) (m/s) 0 * Slewing speed (NA/0 for Manual Crane ) (m/s) 0 * Gradeability (%) 40.4 More than 40.4 Or higher Static load test at 1point5 times the max working load Yes * Dynamic at 1point35 times the max working load Yes * Stability tests as per IS 14469-1997 Yes * Derricking time (NA/0 for Manual Crane ) 0 Any applicable numeric value Telescoping time (NA/0 for Manual Crane ) 0 Any applicable numeric value Braking operations NA * Counter weight 0 * Hoist mechanisms with load & speeds Yes Yes Cycle time (where necessary) (NA/0 for Manual Crane ) 0 * Functioning of limiting devices NA * Performance of driving medium
Requiredfor example
Requiredmotor currents under test load conditions NA * Operating Temperature -20°C to 50°C -20°C to 50°C
Required-5°C to 20°C
Required5°C to 45°C Accessories Speed Governers Yes Yes 5/7 ABS Fitted Yes Yes Side View Mirror Yes * Low Fuel warning Light Yes * Fog Lights Yes * Standard Spare wheel and Tool Kit Yes Yes PTO provision on gear box and transfer cases Yes Yes Audio - visual warning and or motion cut off system for load moment
Requiredload radius
Requiredload limiter
Requiredload locks Yes * Over hoisting overloading Yes * Auto –two block system with rope counters Yes * Disturbed stability of the crane Yes Yes Safety brakes on hoist Yes Yes Signals for other highway traffic/users Yes * Pressure relief valve
Requiredsafety check valve
Requiredhose failure protection etc as applicable No (for Manual Crane) No (for Manual Crane) Audio visual signal for reversing of the crane Yes * Any other safety requirements and features considered desirable shall be provided Yes * All safety provisions for ensuring safety of equipment and its subsystems; the goods
Requiredthe surroundings; and the operators
Requiredhelpers any other road users
Requiredetc be provided Yes Yes All weather day and night operational capability is required Yes Yes 6/7 Rear Hook Yes * Fire Extinguisher Yes Yes Front Bumper Hook Yes * Performance Parameters Warranty (Time wise) 12 More than 12.0 Or higher Warranty (Distance wise) 20000 More than 20000.0 Or higher Warranty on Battery 12 More than 12.0 Or higher No Of Free Services 3 More than 3.0 Or higher * Bold specifications are the golden parameters. * Bidders may note that In respect of non-golden Parameters
Requiredthe specifications 'Values' chosen by Buyer will generally be preferred over 'Bid requirement ( allowed Values) by the Buyer.
