Providing High mass Light Tower with necessary Electrical cable line in Kumuly Depot cum Bus stand

Supply and Laying of 2x6sq.mm PVC LTUG Aluminium armoured cable in a trench to be excavated at a depth of 0.75 metre putting 0.15metre layer of sand and covering the cable completely with bricks and sand and refitting the earth to make good

Supply and erection of 16 mts High mast Tower of Polygonal Shape for Asymmetric loading of up to six luminaries of 150W LED Lamp. The Mast shall be made from steel grade of BSEN 10025 and should be in two sections (each of length 8375 mm or top length 5470mm & bottom length 10980mm) with the bottom section shall be of 4 mm thick and top section of 3 mm thick. Both the sections should be joined by telescopic slip joint. The bottom dia should be of 410 mm or more while top dia should of 150 mm. The bottom section should have Anti Vandalism looking type door size of 1200 mm x 250mm .The mast section should be fabricated for metal protection through hot dip galvanization and thickness of galvanization should not be less than 65 microns. The mast should be supplied with Components including Head Frame & Pulley Assembly, Winch Bracket, Lantern Carriage Ring for Luminaries and C.G Box Mtg. Arms, Resting Bracket Guide Ring, compensating Disc, Lightening Arrestor, LED AOL, Wire Rope, Safety Wire Rope, D Suckle Clamps, nuts and Bolts, internal Cable, foundation Accessories., winch assembly with two drums with SWL 750 KG and internal power tool of 2 HP with control panel. The size of base plate diameter should be of 570 mm or more with thickness should be of 20 mm.)

Basic total

CGST 9%

SGST 9%