Construction of 03 Storey building at ZEO office Achabal, Anantnag (by way of sanitary items)

Earth work in excavation by mechanical means (hydraulic excavator) in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 m in width) and for shafts, wells, cesspits and the like not exceeding 1 sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out excavated earth and disposal of surplus excavated earth

Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20 cm in depth, consolidating each deposited. layer by ramming and watering, lead upto 50 m andmlift upto 1.5 m.

Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with: 1:4:8 (1 cement: 4 coarse sand : 8 graded stone aggregate 40 mm nominal size)

Providing and laying in position specified grade of reinforced cement concrete including curing but excluding the cost of centring, shuttering, finishing and reinforcement. All works upto plinth level 1:1.5:3 (1 cement: 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size)

Cast in situ Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with: 1:2:4 (1 cement: 2 coarse sand : 4 stone aggregate 20 mm nominal size) graded

Centring and shuttering including strutting, propping etc and removal of form work:- Walls (any thickness) including attached pilasters, buttresses, plinth and string courses etc.

Centring and shuttering including strutting, propping etc and removal of form work:- Suspended floors, roofs, landings, balconies and access platforms.

Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level Thermo-Mechanically Treated bars of grade Fe-500D or more

Dry random rubble masonry with hard stone in foundation and plinth: With bond stone

12mm Cement plaster finished with a floating coat of neat cement of mix:

Cement concrete flooring 1:2:4 (1cement: 2 coarse sand: 4 graded stone aggregate) finished with a floating coat of neat cement including cement slurry and curing complete, but excluding the cost of nosing of steps etc. complete. 50 mm thick with 20mm nominal size stone aggregate

Sanitary Providing and fixing 3 layer PP-R (Poly propylene Random copolymer) pipes conforming to IS: 15801, UV stabilized and anti-microbial fusion welded, having thermal stability for hot and cold water supply including all PP-R plain and brass threaded Polypropylene random fittings. This includes testing of joints complete as per direction of Engineer-incharge. a Internal work Concealed fixing the pipe with clamps at 1.00 meter spacing including cutting chases and making good the 25mm OD(SDR-7.4)

Providing and fixing 3 layer PP-R (Poly propylene Random copolymer) pipes conforming to IS: 15801, UV stabilized and anti-microbial fusion welded, having thermal stability for hot and cold water supply including all PP-R plain and brass threaded Polypropylene random fittings. This includes testing of joints complete as per direction of Engineer-incharge.. 40mm OD(SDR-7.4) Roof to Down

Providing and fixing 3 layer PP-R (Poly propylene Random copolymer) pipes conforming to IS: 15801, UV stabilized and anti-microbial fusion welded, having thermal stability for hot and cold water supply including all PP-R plain and brass threaded Polypropylene random fittings. This includes testing of joints complete as per direction of Engineer-incharge. . 50 mm OD(SDR-7.4) Ground to roof tanks

External work including trenching, refilling etc. Main supply line. a) PPR Union 25mm

External work including trenching, refilling etc. Main supply line. b) PPR Union 40mm

External work including trenching, refilling etc. Main supply line. c) PPR Adapter 40 mm

External work including trenching, refilling etc. Main supply line. d) PPR Adapter 25 mm

Providing and fixing ball valve PPR of approved quality complete a) 25mm dia OD

Providing and fixing ball valve PPR of approved quality complete b) 40mm dia OD

Providing and fixing ball valve PPR of approved quality complete c) 50mm dia OD

Providing and placing on terrace (at all floor levels) polyethylene water storage tank ISI: 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank

Providing and fixing C.P. Brass extension nipple (size 15mmx50mm) of approved make and quality as per direction of Engineer incharge.

Providing and fixing PTMT Ball cock of approved quality, colour and make complete with epoxy coated aluminium rod with L.P/H.P.H.D plastic balls.25mm nominal bore, 152mm long, weighing not less than 440gms.

Providing and fixing 15 mm nominal bore C.P. brass bib cock of approved quality conforming to IS: 8931

Providing and fixing 15 mm nominal bore C.P. brass angle valve for basin mixer and geyser points of approved make conforming to IS: 8931

Providing and fixing white vitreous china water closet (European type W.C. .pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern including flush pipe with manually controlled device (handle lever)conforming to IS:7231, with all fittings and fixtures, complete including cutting and making good the walls and floors wherever required. pan with ISI marked white solid plastic seat and lid.

Providing and fixing white vitreous china wash Basin with C.I brackets, single hole basin mixer, 32mm CP brass waste of standard pattern, incl. painting of fittings and brackets, cutting and making good the walls where ever required. Wash basin 550x400mm with a pair of a5mm CP brass taps

P/F white vitreous china pedestal for wash basin complete rested at back for the reception ofpipe and fittings

P/F PVC waste 32mm

P/F 8mm dia C.P/S.S jet with flexible tube up to Imter long with S.S triangular plate to European type W.C of approved quality and make.

P/F 600x450mm bevelled edge mirror of superior glass of approved quality complete with 6mm thick hard board ground glass to wooden cleats with C.P brass screws and washers complete.

P/F 600x120x5mm glass shelf with edges off. Supported on anodised angle frame with CP brass brackets and guard rail complete fixed with 40mm screws, rawl plugs etc

P/F toilet paper holder (CP)

P/F in position PVC P or S traps

P/F in position PVC floor traps a) 100mm dia

P/F in position PVC floor traps b) 75mm dia

P/F soil, waste and vent pipes 1mm thick a)PVC S&S pipe (150mm dia)

P/F soil, waste and vent pipes 1mm thick b)PVC S&S pipe (100mm dia)

P/F soil, waste and vent pipes 1mm thick c)PVC S&S pipe (75mm dia)

P/F soil, waste and vent pipes 1mm thick d)PVC S&S pipe (50mm dia)

PVC Cowell 50mm dia

P/F PVC stay and clamps for PVC pipes a) 100mm

P/F PVC stay and clamps for PVC pipes b) 75mm

P/F bend of required degree with door, inspection rubber washer 3mm thick, bolts and nuts complete PVC S&S pipes a) 100mm

P/F bend of required degree with door, inspection rubber washer 3mm thick, bolts and nuts complete PVC S&S pipes b) 75 mm

P/F plain bends a) 100mm

P/F plain bends a) 75 mm

Providing and filling the joints with spun yarn, cement slurry and cement mortar 1:2 a) 100mm

Providing and filling the joints with spun yarn, cement slurry and cement mortar 1:2 a) 75mm

P/F Tee-junction of required degree with acess door, inserted rubber washer 3mm thick, bolts and nuts complete.100x100x100 100 mm

P/F Tee-junction of required degree with acess door, inserted rubber washer 3mm thick, bolts and nuts complete.100x100x100 75 mm

P/F PVC Reducer 100-50mm dia

Providing and fixing liquid PTMT soap container 109mm wide 125mm high and of approved quality weighing not less than 105 grms

P/F PTMT towel rails with brackets fixed to wooden cleats with CP brass with concealed fittings arrangement of approved quality (600mm long total length 645mm,78mm wide and effective hight 88mm weighing not less than 190gms

P/F CP gratting 100mm dia

P/F PVC connections 15mm

Constructing brick masonry chamber for underground C.I. inspection chamber and bend with common burnt clay (non modular) bricks of class designation 7.5 in cement mortar 1:4 (1 cement: 4 coarse sand) С.I. cover with frame (light duty) 455x610 mm internal dimensions, total weight of cover with frame to be not less than 38 kg (weight of cover 23kg and weight of frame 15 kg) R.C.C. top slab with 1:1 ½ : 3 mix (1cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominalsize),foundation concrete 1:5:10 (1 cement: 5 fine sand: 10 graded stone aggregate 40mm nominal size), inside plastering 12 mm thick with cement mortar 1:3 (1 cement : 3 coarse sand) finished smooth with a floating coat of neat cement on walls and bed concrete etc. complete as per standard design: 20.24.1 Inside dimensions 455x610 mm and 45 cm deep for single pipe line

P/F master trap