Procurement and Installation of ECE Lab equipments

Single output variable DC RPSU Single Output Regulated Power Supply - Input Voltage: 230V/50HzAC - Output Voltage: (0–30V)DC - Output Current: (0–2A)DC - Protection Circuit: Over Voltage and Over Current protection, Short-circuit protection - High efficiency: Greater than 85% - Low ripple and noise: Less than 50 mV

Dual output variable DC RPSU Dual Output Regulated Power Supply - Input Voltage: 230V/50HzAC - Output Voltage: (0–30V)DC - Output Current: (0–2A)DC - Protection Circuit: Over Voltage and Over Current protection, Short-circuit protection - High efficiency: Greater than 85% - Low ripple and noise: Less than 50 mV

Function Generator Frequency Range: 0.1 Hz to 2 MHz. Display: 4 to 6 Digit LED Display Output Waveforms: Sine, Triangle, Square, ± Pulse, ± Ramp. Amplitude: 0 – 20 Vp-p. Rise Time: < 100 nS. Distortion: <1% (within acceptable range of frequencies). Power Supply: AC 220 V ±10%, 50-60 Hz Output Amplifier Protection: Protected against Short Circuit and ±15V Overload

Digital Storage Oscilloscope Bandwidth: 50 - 100 MHz. Sampling Rate: 1GS/s. Channels: 2 (minimum) Power Supply: 100V–240V AC, 50-60 Hz Automatic Measurement: Vpp, Vavg,RMS, Frequency, Period, Vmax, Vmin, Rise Time, Fall Time, + Width, - Width, +Duty, - Duty etc., Horizontal Scale: 5 ns/div – 100 ns/div or equivalent Vertical Resolution: 8 bits (2 Channels simultaneously) Vertical Sensitivity: 1 mV/div – 10 V/div (at input) Waveform Math: +, -, x , ÷, invert, FFT etc., Waveform Storage: 16 waveforms or equivalent Communication Interface: USB Host, USB interface. 7-inch color display or equivalent Basic trigger functions

Digital vo;tmeter DC Voltmeter DIGITAL 3½ digit DISPLAY (0-100 V), 0.5 % accuracy (Class 0.5 equivalent) (2000)

Digital Ammeter DC Ammeter Digital 3½ digit DISPLAY (0-2 A), 0.5 % accuracy (Class 0.5 equivalent) (1500)

Eliminator Transformer (Stepdown) Input - 220V - 240V AC, 50 Hz, Output-2V to 12V DC, 0-2 A Ripple: <5mV

Embedded LPC 2148 Kit • CPU - LPC2148, Core - 16/32 bit ARM7DMI-S • Speed - Max 60 MHZ, Flash - 512KB, RAM (on-chip) - 40KB, 46 General Purpose I/O Pins, USB2.0 • One 10bit A/D Converter with 14 Analog inputs, One 10bit D/A Converter, Six PWM & Watchdog • Two UARTS (16c550), Two I2C (400Kb/s), Two SPI’s • Eight Bit Digital Output, Eight Bit Digital Input, 16 x 2 Characters LCD and 4x4 matrix keypad • One potentiometer for giving analog input, Relay & Buzzer Interface • I2C Devices: RTC, EEPROM and Seven segment Display, On Board Stepper Motor Driver • LM35 Temperature Sensor, One RS 232 Lines are Terminated at 9 Pin D type connector and USB interface • Board has inbuilt power supply and mounted in sturdy cabinet Accessories • USB cable with utility software to download programs from PC to target board • Example programs in embedded C and Assembly with documentation (soft copy) • Power Chord, User Manual with CD/DVD, Free Demonstration after delivery

Single phase Induction motor Single phase induction motor, 230V AC, 50Hz supply. Power rating 1 HP (0.75 kW). Speed 1440 RPM. Capacitor start/run type suitable for lab use Loading Setup portable ammeter and Digital Tactometer contact type