Electrical wiring of Adiwashi Shishu Vidya Mandir School at Tarmi siding colony under SDOCM

Amount

Wiring for light point/ fan point/ exhaust fan point/ call bell point with1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface/recessed medium class PVC conduit, with piano type switch, phenolic laminated sheet, suitable size M.S. box and earthing the point with 1.5 sq.mm. FRLS PVC insulated copper conductor single core cable etc.as required.Group A (Light bulb point -55,Fan point-12,Tube light point-26,Call bell point-01=94 Ponts)

Supplying and fixing metal box of 180mmX100mmX60mm deep (nominal size)on surface or in recess with suitable size of phenolic laminated sheet cover in front including providing and fixing 6 pin 5/6&15/16amps socket outlet and15/16amps piano type switch, connection, painting etc. as required.

Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 6 pin 5/6 & 15/16 amps modular socket outlet and 15/16 amps modular switch, connection etc. as required.

Supplying and fixing following way, single pole and neutral, sheet steel, MCB distribution board, 240 volts, on surface/ recess, Complete with tinned copper busbar, neutral bus bar,earth bar, dinbar, inter connections ,powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator) 2 + 4 way/ 6 way , Double door

Supplying and fixing 5 amps to 32 amps rating, 240/415 volts, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections testing and commissioning etc. asrequired :Single pole and neutral

Supplying and fixing stepped type electronic fan regulator on the existing modular plates witch box including connections but excluding modular plate etc. as required.

Earthing with G.I. earth pipe 4.5 metre long, 40 mm dia including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe etc. with charcoal/ coke and salt as required.

Providing and fixing following capacity TP&N disconnector fuse switch unit inside the existing panel board with ISI marked HRC fuses including drilling holes in cubicle panel, making connections etc. as required : 32 Amp TP&N

Supply & providing wooden board 8"x10"

Providing and fixing 50 mm dia X 3.2 metres G.I. pipe (including accessories) complete with 50 mm X 50 mm X 6 mm angle iron bracket on wall and 75 mm X 90 mm shackle insulator with straps for house service connection including painting the angle and flat iron with primer and finish paint etc. as required

Supply & providing 7/20 copper service wire PVC sheated & insulated

Supply & providing 2watt LED tube light fitting & fixing set as per EIC

Supply and providing 14watt LED bulbs

Total impact of GST for the purpose of CTC

MAHTO ENTERPRISES

M/S SHIV PARBATI ENTERPRISES