Construction Shed, Chabutra and Repairing Work of Boundary wall for Shamshan Ghat and Kabristan in Village Raipur Bangar, Greater Noida.

Excavation in foundation in ordinary soil (Loam, clay or sand) including lift upto 1.50m and lead upto 30M and including filling watering and ramming of excavated earth into trenches or into the space between the building and the sides of foundation trenches or into the plinth and removal and disposal of surplus earth as directed by Engineer-in-charge upto a distance of 30M from the foundation trenches. (UPPWD/SOR-2020/251(a))

Depth from 0.0 to 1.5 M below G.L.

Cement Concrete with 4 cm gauge approved stone ballast, coarse sand & cement in the proportion of 8:4:1including supply of all materials, labour, Tools & plants etc. required for proper completion of the work. (SOR-281)

Sand filling in plinth including supply of necessary quantity of sand from a distance not exceeding 8 Kms. from the site of work and including watering dressing etc. labour and T&P etc. required for the proper complition of the work. saplings of girth upto 30 cms. measured at a height of 1 M. above ground level and removal of rubbish upto a distance of 50 M. out side the periphery of area cleared. UPPWD/SOR-2020, Item no.-255

M-150 Brick Work1:4 one cement & four Coarse sand of 2.20 F.M. mortar in foundation and plinth including supply of all materials, labour and T&P etc. requried for proper completion of the work. SOR-305a

M-150 Brick Work1:4 one cement & four Coarse sand of 2.20 F.M. mortar in superstructure including necessary Cutting & moulding of brick as required. for walls of half brick thick. including supply of all materials, labour and T&P etc. requried for proper completion of the work. SOR-310a

2 cm thick Damp Proof Course with Cement and approved coarse sand 1:2 with and including water proofing as ordered by the Engineer incharge in the proportion as by the manufacturer including supply of all materials, labour. Tools & plants etc. required for proper completion of the work and including proper curing & shutterings as necessary. UPPWD/SOR-2020, item no.-360

12 mm cement plaster of mix, 1:6 (1 cement: 6 coarse sand) DSR-18/Item Code: 13.4.2

Dry brick on edge flooring in required pattern with bricks of class designation 7.5 on a bed of 12 mm mud mortar, including filling joints with Jamuna sand, with common burnt clay non modular bricks. DSR-18/11.2

Finishing wall with water proof cement paint of approved make and quality on new wood with two coat to give an even shade including supply of all materials, labour, Tools & plant etc. required for proper completion of the work. (UPPWD/SOR-2020/660)

Providing corrugated G.S. sheet roofing including vertical / curved surface fixed with polymer coated J or L hooks, bolts and nuts 8 mm diameter with bitumen and G.I. limpet washers or with G.I. limpet washers filled with white lead, including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete (up to any pitch in horizontal/ vertical or curved surfaces), excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required.

1.00 mm thick with zinc coating not less than 275 gm/m² DSR-18/12.1.1

Plain/Reinforced Cement Concrete in Open Foundation complete as per Drawing and Technical Specifications. RCC Grade M25 using batching plant transit mixer & manual placing . MORTH-20 item-15.11

reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level.

Cold twisted bars DSR-18/Item Code:5.22

Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required.

In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works DSR-18/10.25.2

Painting roofs or other iron work in large areas with one coat priming and one coat of approved (above one Sq. Metre) paint (British antesol or equivalent) including supply of all materials, labour, Tools & plants etc. required for proper completion of the work. Paint to be used should confirm ISI with synthetic enamel paint of approved brand and manufacture to give an even shade (SOR-644+645)

As in item on 644 above but for every coat after the first coat (two or more coat)

Cement concrete with 2cm gauge approved stone ballast, coarse sand & cement in the proportion of 4:2:1 including supply of all materials, labour, tools & plants etc. required for proper completion of the work. (UPPWD/SOR-2020/279(a))

Providing and laying 60 mm (grey coloured) interlocking concrete paver with 10 % coloured paver as end when required as per size and shape required of M -30 grade pavement compressed in hydraulic press or vibro static machine on a prepared bed over a layers of sand 40 mm thick and vibro compacted with dry sand grouting and edges closed with cement powder sand finish. (Coloured shall be decided by Engineer -in - charge) A.R. /GNIDA

Clearing of Jungle including uprooting of weeds ran vegetation grass brush wood trees and sapling of girth up to 30cm measured at height of 1.00mtr. Above ground level removal of rubbish up to a distance of 50mtr. Out side the periphery of the area cleared (UPPWD/SOR-2020/259 (i))

Dismantling old plaster of skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground with 50 metres lead. DSR-18/Item Code: 15.56

Labour cess will be paid extra as per applicable

GST will be paid extra as per applicable