Certain B/R repairs like joinery, flooring, plumbing/sanitary and roofing etc incl Periodical services to FAFA/MAP to JCOs/ORs Md Accn under AGE B/R-II GE(S) Patiala

Amount

Taking down cement plaster of any description, any thickness from external surfaces of walls/soffits etc. incl raking out joints, hacking for keys, scrubbing down with water etc complete all as specified and directed.

M&L for cement plastering 10mm thick in cemet mortar 1:6 on brick work or concrete surfaces complete all as specified and directed.

M&L for cement plastering 15mm thick in two layers (10mm and 5mm respectively) in cement mortar 1:4 including mixing of liquid water proofing compound as per manufacturer's instructions on brick work or concrete surfaces or in chajjas/parapet walls etc and fixing of chicken wire gauge where directed complete all as specified and directed. Note : WPC and chicken wire gauge will be measured and paid separately.

Supply only integral liquid water proofing compound complete all as specified and directed.

Supply only chicken wire mesh 22 gauge of size not more than 20X20mm complete all as specified and directed.

M&L for cement plastering 5mm thick in cemet mortar 1:3 as on ceilings or concrete surfaces finished even and smooth without using extra cement complete all as specified and directed.

Complete removal of existing treatment of any type/description from walls/RCC surfaces/ceiling/chajjas/roof projections etc with mechanical means/grinder complete all as specified and directed.

M&L for applying acrylic wall care putty on internal/ external surfaces of walls/ ceilings/ soffits (thickness vary from 1.5 to 2.5 mm as required for desired smoothness and levelling of surfaces in two or more layers) by using ready made wall care putty including sand papering after filling the putty to make surface smooth and ready for receiving painting etc complete all as specified and directed.

Applying 02 coats of interior emulsion paint (light shade) @ 10 sq.m/litre/2 coats by using roller/ brush to wall surfaces over & including a coat of interior wall primer @ 10 sq.m/ litre/ 1 coat as recommended for under coat by manufacturer of interior emulsion complete all as specified and directed.

Applying 02 coats of interior emulsion paint (white shade) @ 10 sq.m/ litre/ 2 coats to ceiling surfaces over & including a coat of interior primer @ 10 sq.m/ litre/ 1 coat as recommended for under coat by manufacturer of interior emulsion complete all as specified and directed.

Applying 02 coats of exterior emulsion paint (light shade) @ 5 sq.m/ litre/ 2 coats by using roller/ brush to external walls/ RCC surfaces/ soffits of chajjas/ roof projections/ cantilevers/ balcony etc surfaces over & including a coat of exterior wall primer @ 11 sq.m/ litre/ 1 coat as recommended for under coat by manufacturer of exterior emulsion complete all as specified and directed.

Taking down chowkhats or frames (without taking off shutters from the frame) n. exc 1.5 Sqm and making good to reqd shape for hold fast block for new frame complete all as specified and directed.

Taking down chowkhats or frames (without taking off shutters from the frame) exc 1.5 Sqm and n. exc 4.00 Sqm and making good to reqd shape for hold fast block for new frame complete all as specified and directed.

S&F Spray Docu painted Pressed steel frames made of MS sheet of 1.20 mm thickness for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, hold fast etc., complete all as specified, size 105 x 60mm and incl cutting holes and making good reqd shape for hold fast block for new frame complete all as specified and directed.

S&F Spray Docu painted Pressed steel frames made of MS sheet of 1.20 mm thickness for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, hold fast etc., complete all as specified, size 125 x 60mm and incl cutting holes and making good reqd shape for hold fast block for new frame complete all as specified and directed.

M&L cement concrete 1:2:4 type B-1, using 20mm graded stone aggregate as in holdfast blocks complete all as specified and directed.

S&F factory made flush shutters 35mm thick minimum 5 ply, solid core construction, with block board core and plywood face panels, commercial type on both sides with 6mm thick lipping frame to match including supply and fixing following items : (a) Stainless Steel (304 Grade) Finished Butt Hinges 150mm - 4 Nos per leaf (b) Stainless Steel (304 Grade) Finished Tower Bolt 200mm long - 2 Nos per leaf (c) Stainless Steel (304 Grade) Finished Handles 200 mm - 2 Nos per leaf (d) Stainless Steel (304 Grade) Finished Sliding Door Bolt/Aldrop 16 x 300mm - 1 No per leaf (e) Stainless Steel (304 Grade) Finished Floor Door Stooper - 1 No per leaf

S&F 35mm thick glazed and skelton shutters of 2nd class hard wood (factory made) open rebated and divided to receive glass, gauze etc (without sash bars) edges of framing plain, chamfered or rounded fitted with cut and mitred beads for securing glass etc size of members of shutter as specified in SSR-91 Pt-1 section 8 clause 8.20(a), kiln seasoned and chemically pressure treated all as specified including stainless steel 304 Grade wire cloth (wire dia. 0.36mm) and the supply and fixing following items: (a) Stainless Steel (304 Grade) Finished Butt Hinges 150mm - 4 Nos per leaf (b) Stainless Steel (304 Grade) Finished Tower Bolt 200mm long - 2 Nos per leaf (c) Stainless Steel (304 Grade) Finished Handles 200 mm - 2 Nos per leaf (d) Stainless Steel (304 Grade) Finished Sliding Door Bolt/Aldrop 16x300mm - 1 No per leaf

S&F 300mm, mild steel ordinary rat tail rod pattern springs including roller and roller plate complete all as specified and directed.

S&F powder coated 50 microns extruded aluminium glazing/ doors & shutters made out of section 63.5x38.10x1.29mm for chowkats or frame & shutters made of size 44.45x44.45x1.29mm for side rails and middle rail, 114.3X44.45X1.29mm for top rails and bottom rails and including 12mm thick High Density Fibre Board pre-laminated on both sides (water proof) below & above middle/lock rail and to be fixed with and including EPDM gasket to render the glazing, air and water tight etc. & aluminium beads 20mm size with and complete all as specified and directed including supply and fixing the following items: (a) Stainless Steel (304 Grade) Finished Butt Hinges 150mm - 3 nos per leaf. (b) Powder Coated Aluminium Tower Bolt 200mm long - 2 nos per leaf (c) Powder Coated Aluminium Handles 150 mm - 2 nos per leaf

Providing and fixing factory made extruded aluminium casement windows (with provision for cooler) with 50 micron powder coating doubled panelled and double shutters consisting of frame and mullion of 101.60X44.45X1.29 mm and shutters made of 63.5X31.75X1.29mm and to be fixed with and including EPDM gasket to render the glazing, air and water tight etc. & aluminium beeds 20mm size with and including 5mm thick glass in front shutters and stainless steel wire gauge 0.36mm dia and 1.40 aperature in inner shutters complete fixed in all respect as specified including supply and fixing following items :- (a) Stainless Steel (304 Grade) Finished Butt Hinges 150mm - 2 nos per leaf. (b) Powder Coated Aluminium Tower Bolt 150mm long - 2 nos per leaf. (c) Powder Coated Aluminium Handles 150 mm - 1 nos per leaf.

Providing and fixing aluminium sliding windows with 50 micron powder coating, three track sliding windows with two glazed shutters, 5mm th tinted glass ordinary quality and one shutter of stainless steel wire mesh 0.36mm dia wire and 1.40mm aperature including good quality of bearing handle, locks, including EPDM gasket to render the glazing, air and water tight etc complete all as specified and as directed. catalouge numbers of Jindal company or equivalent make as specified.

Providing and fixing factory made extruded aluminium ventilators with 50 micron powder coating of frame of 63.5 X 38.10 X 1.29 mm including 5mm thick frosted glass in lower 55% portion of shutters and stainless steel wire gauge 0.36mm dia and 1.40 aperture in upper 45% portion of shutter and to be fixed with and including EPDM gasket to render the glazing, air and water tight etc. & aluminium beeds 20mm size with and complete fixed in all respect as specified.

S&F factory made aluminium 50 micron powder coated grill, opening size 101.6 X 63.5 mm (4"X2½") and of approx weight @ 1.345 Kg/sq.m complete fixed in position in windows in all respect as specified

M & L for preparing new wood & wood based surfaces of any description, not otherwise described over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and as directed.

S&F anodised aluminium alloy Harrison rails, mild steel, chromium plated with fixing brackets, stops, rollers etc. all as specified & directed as in repair.

Dismantling, floor, hearth or wall tiling including CM(bedding (but not backing), removing rubbish off the premises

M&L for anti-skid premium (1st) quality coloured tiles 400 X 400 mm and 7-8 mm thick, as in floors etc. in any pattern of light & dark tiles as approved, set and jointed in neat cement slurry and pointed in white or coloured cement to match, in floors etc. over & including 20 mm thick screed in cement mortar (1:4), over 25 mm thick cement concrete 1:2:4 type B-0 complete all as specified and directed by Engr-in-Charge.

Providing and Laying Premium (1st) quality straight edge, plain square outdoor vitrified full body tiles with in 400x400x10 mm thick as in skirting in cement slurry over and including screed of 10 mm thick rendering in cement mortar (1:4) and pointed in cement mixed with pigment to match the shade of tile complete all as specified and directed by Engineer in Charge.

Providing and Laying Premium (1st) quality digitally printed straight edge, glazed ceramic rectangle tile in approved shade and finish in coloured tiles 600 X 300 mm and 8-9 mm thick, in any pattern of light & dark/ highlighters tiles etc as approved, on vertical surfaces such as in skirting/ dado etc, set and jointed in cement slurry over & including 10 mm thick rendering in cement mortar (1:4) and pointed in white cement with pigment to match the colour of tiles complete all as specified.

M&L for anti-skid ceramic joint free premium quality coloured tiles 300 X 300 mm and 6-7 mm thick, as in floors etc. in any pattern of light & dark tiles as approved/ matching with wall tiles, set & jointed in neat cement including and over 20mm thick screed bed in CM (1:4) and pointed in white or coloured cement to match, in floors etc. complete all as specified.

Providing and Laying Premium (1st) quality straight edge, plain square outdoor vitrified full body tiles with in 400x400x10 mm thick as in skirting in cement slurry over and including screed of 10 mm thick rendering in cement mortar (1:4) and pointed in cement mixed with pigment to match the shade of tiles complete all as specified and directed by Engineer in Charge.

M&L for Baroda Green marble, machine cut as in shelves/ steps/ landings/ cills/ jambs/ skirting/ border only in tile flooring and the like works and flooring etc, 15-16 mm thick including bull-nose the exposed sides/ lengths, set and jointed in cement slurry over & including screed of 15 mm thick rendering in cement mortar (1:4) and pointed in cement mixed with pigment to match the including rubbing, cutting and mirror type granite polishing and including dismantling/ demolition complete all as specified.

M&L for machine cut kota stone slab as in flooring of size 580 x 580 mm each & 18-20 mm thick, set and jointed in cement slurry as per pattern approved over & including screed of 20 mm thick in cement mortar (1:4) and pointed in cement mixed with pigment to match the shade of slab including rubbing, cutting and mirror type polishing complete all as specified.

M&L for machine cut kota stone slab as in skirting of 18-20 mm thick, set and jointed in cement slurry over & including screed of 10 mm thick rendering in cement mortar (1:4) and pointed in cement mixed with pigment to match the shade of slab including rubbing, cutting and mirror type polishing complete all as specified .

S&F in repair vitreous china premium/ 1st quality wall hung wash basin, white, flat back, min. size 500x400 mm, screws & plug and brackets etc. all accessories as recommended by manufacturer incl. CP bottle trap 32 mm with inlet and outlet screwed for pipe or connections incl all necessary accessories for fixing, packing, union and incl 32mm brass CP waste coupling half thread and complete in all respect as per manufacturer's instructions and taking down existing of any description/ size all as specified.

S&F vitreous china premium/ 1st quality wash down water closet pan (pedestal pattern/ EWC) S/P trap white colour of size 520X360X390mm including connection to drain (or out going pipe) and to flushing pipe, antisyphonagee, pipe, etc., with flush pipe and incl. S&F plastic seat cover as recommended by manufacturer closed pattern with flat bottom etc, and incl all necessary accessories like rag bolts/ gel gasket etc as recommended by manufacturer for fixing, packing and including and taking down existing of any description/ size complete in all respect all as specified.

S&F flushing cistern of PVC 10 ltr. cap. with dual flushing system, white colour, valveless syphonic action type, low level, with inlet, ball valve, float and including brackets and connection to pipe etc. and incl all necessary accessories like rag bolts/ gel gasket etc as recommended by manufacturer for fixing, packing and taking down existing of any description/ size complete in all respect all as specified.

S&F health faucet with 8mm dia and 1.2 metre long flexible tube in chorme finish and wall hook including making connections and fixed in position complete in all respect as specified. (Make : Jaquar (ALD-573) or equivalent from Hindware/ Parryware/ Cera as approved by Accepting Officer)

M&L for toilet paper holder with flat recessed type stainless steel Complete all as specified and directed.

S&F in repairs PVC cabinet with looking mirror of size 350x450mm complete all as specified and directed.

S&F PTMT 450mm long shelf for wash basin. Fixed in position complete in all respect all as specified.

S&F sheet glass shelf assembly consisting of 8mm thick glass shelf 300 x 300mm as in corners wide with bevelled edges/ hatching of edges fixed with stainless steel 'D' bracket fixed and railing complete all as specified and directed.

S&F central hole brass chromium plated basin mixer with regular spout with/ without popup waste system with 450 mm long braided hoses complete.

M&L for wall mounted mixer assembly, brass chromium plated, comprising of centre outlet tap, double inlets for hot & cold water, non telephonic shower arrangement, with connecting legs & wall flanges, inlets suitable for 15mm bore connections complete all as specified and directed.

S&F Sink Cock wall mounted with swinging spout and with wall flange, fency type chromium plated cast copper alloy screwed down, high pressure, screwed one ends for 15mm bore of iron pipe or for union and fixed in position complete all as specified and directed.

S&F stainless steel sink with drainage board, AISI 304 quality grade, 1.00 mm thick, glossy finish, for kitchen with plugs washers and CP waste coupling/ round strainer of 110mm dia and including cantilever cast iron brackets, connecting union, etc, overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm and making good disturbed portion in CM 1:3 or PCC 1:2:4 as directed.

S&F towel rod CP 60 cm long between flanges and including all accessories like brackets/ screws etc as recommended by manufacturer and complete fixed in position complete all as specified.

S&F PVC connections 15mm size with PTMT nuts of length 450mm complete all as directed and specified.

S&F cockroach trap gratings AISI-304 of size 150X150mm square in shape with 5mm border complete in all respect all as specified.

Taking up or down existing steel tubing and connections, 15mm bore complete all as directed and specified.

S&F 15mm bore steel water tubing medium grade galvanised with all fittings and fixed complete to walls and ceiling or laid in floor etc complete all as directed and specified.

Taking up or down existing steel tubing and connections, 20mm bore complete all as directed and specified.

S&F 20mm bore steel water tubing medium grade galvanised with all fittings and fixed complete to walls and ceiling or laid in floor etc complete all as directed and specified.

Refixing 20mm bore GI steel water tubing medium grade fixed to walls complete all as specified.

Taking down of PVC water storage tank of of 300 to 500 ltrs capacity as located on terrace of the building all as specified and directed.

S&F ISI marked doubled layered rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top / cover) 500 Ltrs capacity hoisted and fixed in position all as specified including 20 mm dia brass float valves, high pressure, with polythene float and fly nut complete screwed for 20mm bore iron pipe and including GI nipple/union of 20mm bore to connect GI tubing to PVC water tank complete all as specified and directed.

Repair to RCC ceiling, sunshades, Chajjas, Balconies, Columns, bands, beams, roof slab and similar RCC work at any position/ height by dismantling loose/ disintegrated portion and dubbing out with Cement Concrete 1:1½:3, 15mm to 50mm thick using 6 to 12mm graded stone aggregate to make up and finished to required shape including provision of necessary supports if required and stitching of cracks with mild steel U clamps made out of 8mm dia @ 150mm c/c with inserting concrete block stretcher with cement mortar 1:3 mixed with adhesive chemical (Polymer based) and reinforced with PVC chicken mesh including form work where ever required and finished with10 mm thick plastering in CM 1:4 finished even and fair without using extra cement including preparation of surfaces to receive finishes complete all as specified and directed.

Dismantling of brick tiles or terracing tiles single layers on roofs complete all as specified.

Demolition of mud phuska on roof any thickness all as directed.

Roughening surfaces of old concrete floor/ roof by picking, sweeping clean and washing down with water to remove dust, etc. complete all as specified.

PCC 1:3:6, type B-0 using 12.5mm graded stone aggregates as in padding over roof, minimum thickness at khurra as 25mm to maintain a slope of 1:100, complete all as specified and directed.

Cutting grooves in brick wall, 50 mm wide and 65mm deep and shaping horizontal face of groove with cement mortar 1:3 complete all as specified.

Providing and laying 3mm thick APP (Atactic Polyproplene Polymer) modified prefabricated five layer, weight not less than 4.0 Kg/Sqm water proofing membrane black finished, reinforced with non-woven polyster matt make as approved including of a coat of bitumen primer @ 0.40 ltr/sq.m by the same membrane manufacturer of density 0.87 to 0.89 Kg/Ltr at 25 degree C temperature and viscosity 70 - 160 cps Over the coat, 3mm th 5 layered APP membrane shall be laid using butane torch and sealling all joints etc after the surface complete as per standard practice as per manufacturers instructions. The vital physical and chemical parameters of the membrane shall be as under - (i) Joint strength inlongitueinal and transverse direction at 23 degree C as 650/450N/5cms (ii) Tear strength in longitudinal and transverse direction as 300/ 250 N/. Softening point of membrane not less than 150 degree C Cold flexibility upto 20 degree C when tested in accordance with ASTM (D05147)

Precast PCC plain factory made tiles, ISI marked, 22 mm thick of size 250 mm x 250 mm, fabricated using grey cement & no pigments on and including 15 mm thick cement mortar (1:3) bedding and joints grouted flush in cement mortar (1:3) mixed with integral liquid water proofing compound over roof surfaces complete all as specified. (WPC shall be measured and paid separately)

Demolition of brick work or stone/boulder masonary built in cement mortor including all quoins, arches, pillars etc complete all as specified.

M&L Brick work with sub class 'B' bricks straight or curved on plan exceeding 6m mean raidus bulit in C:M 1:6 all as specified.

Cement concrete (1:2:4) type B-1 using 20 mm graded stone aggregate as in plinth protection, 50 mm thick, surfaces finished even and smooth without using extra cement as in plinth protection including provision of construction joints and form work complete all as directed by Engr-in-Charge and complete as specified.

PCC 1:3:6 type C-2 using 40mm graded stone aggretgate, as in base for PVC tanks complete all as specified and directed.

Demolition of plain cement concrete of any description and in any position not otherwise specifically provided for complete all as specified.

Preparation of old steel surfaces of any description, over 10 cm width or girth and applying two coats of synthetic enamel paint complete all as specified

Writing letter or figures (Block, Roman, Italic or Indian) n exc 30 cm high complete having the colour of synthetic enamel paint and dimension of letter to be used as approved by Engr-In-Charge.

Writing Stops, commas, short lines, dashes, huphesn, brackets etc with the colour of synthetic enamel paint and dimension of characters to be used as approved by Engr-in-Charge.

Complete removal of existing treatment of any type/description from internal surfaces of walls & ceiling with mechanical means/grinder complete all as specified and directed.

Applying acrylic thick wall care putty on internal surfaces of walls/ceilings (thickness vary from 1.5 to 2.5 mm as required for desired smoothness and levelling of surfaces in two or more layers) by using ready made wall care putty including sand papering after filling the putty to make surface smooth and ready for receiving exterior painting complete all as specified and directed.

M&L for preparing old plastered or unplastered surface including washing, rubbing down and stopping of distempered and painted surface and applying two coat of distempred oil emulsion on wall complete all as specified.

M&L for preparing old plastered/unplastered surfaces of walls and applying three coats of white wash by making the lime slaked at site and shall be mixed and stirred with about five liters of water for 1 kg of unslaked lime to make a thin cream. This shall be allowed to stand for a period of 24 hours and shall then be screened through clean coarse cloth. 1 kg of gum dissolved in hot water shall be added to every one cubic meter of lime cream. About 1.3 Kg of sodium chloride dissolved in hot water shall also be added for every 10 kg of lime for making the coating hard and rub-resistant. Small quantity of ultramarine blue (upto 3 gm per kg of lime) shall also be added to the last two coats of white wash solution and the whole solution shall be stirred thoroughly before use complete all as specified and as directed.

M & L for preparing existing treated surfaces on walls including cornices and applying one coat of white wash by making the lime slaked at site and shall be mixed and stirred with about five liters of water for 1 kg of unslaked lime to make a thin cream. This shall be allowed to stand for a period of 24 hours and shall then be screened through clean coarse cloth. 1 kg of gum dissolved in hot water shall be added to every one cubic meter of lime cream. About 1.3 Kg of sodium chloride dissolved in hot water shall also be added for every 10 kg of lime for making the coating hard and rub-resistant. Small quantity of ultramarine blue (upto 3 gm per kg of lime) shall also be added to the white wash solution and the whole solution shall be stirred thoroughly before use complete all as specified and as directed.

M&L for preparing existing treated surfaces on ceiling including cornices and applying one coat of white wash by making the lime slaked at site and shall be mixed and stirred with about five liters of water for 1 kg of unslaked lime to make a thin cream. This shall be allowed to stand for a period of 24 hours and shall then be screened through clean coarse cloth. 1 kg of gum dissolved in hot water shall be added to every one cubic meter of lime cream. About 1.3 Kg of sodium chloride dissolved in hot water shall also be added for every 10 kg of lime for making the coating hard and rub-resistant. Small quantity of ultramarine blue (upto 3 gm per kg of lime) shall also be added to the of white wash solution and the whole solution shall be stirred thoroughly before use complete all as specified and as directed by Engineer-in-Charge.

M&L preparing steel and iron surfaces of any description, not otherwise described over 10 cm width or girth and applying one coats of synthetic enamel paint complete all as specified and as directed.

M&L for preparing old painted wood & wood based surfaces of any description, not otherwise described over 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and as directed.

Repair to RCC sunshades, Chajjas, Balconies, Columns, bands, beams and similar RCC work at any position/height by dismantling loose/disintegrated portion and dubbing out with Cement Concrete 1:1½:3, 15mm to 50mm thick using 6 to 12mm graded stone aggregate to make up and finished to required shape including provision of necessary supports if required and stitching of cracks with mild steel U clamps made out of 8mm dia @ 150mm c/c with inserting concrete block stretcher with cement mortar 1:3 mixed with adhesive chemical (Polymer based) and reinforced with PVC chicken mesh including form work where ever required and finished with10 mm thick plastering in CM 1:4 finished even and fair without using extra cement including preparation of surfaces to receive finishes complete all as specified and directed.

M&L for cutting down plants/trees/bushes of girth not exc 15 cm from roof tops/sides, externals walls of building, chajja wall junctions, junctions of rain water/ CI/ Soil waste/ Vent pipes including taking out roots entered into walls/slab surfaces, then spraying the affected area with solutions of 25 ml Glyphosphate (4% content) diluted with 1 ltr of water or as per manufacture's instructions & making good the disturbed surface using PCC (1:2:4), type B-0 or cement mortar 1:3 as per site requirement with necessary scaffolding/stagging etc. any height from ground level, complete all as specified & as directed by Engineer-in-Charge. Note :- 1. Any PVC pipes, brick works damaged during the execution of the work shall be replaced with new one to ensure leak/seepage free joint. 2. The width of such area will be measured 0.50 sq.m extra beyond roots of the plants.

M&L for preparing old plastered or unplastered surface including washing, rubbing down and stopping of distempered and painted surface and applying one coat of distempred oil emulsion on wall complete all as specified.

NORTON BUILDER

Arneja Builders

Buttar Construction Co.

M/S RAJ KUMAR GUPTA

m/s panchmukhi builders

AR CONSTRUCTIONS

DELTA CONSTRUCTION CO