Works contract for erection of poles and DTs and other allied extension works in Elumathur section Elumathur sub division of South Erode Division

Amount

Excavation of pole pit size of 2'x2'x6' upto 27' Pole by using JCB or manual

Excavation of Stay pit 4.5' to 5' by using JCB or manual

Excavation of pole pit size above 8 Mts PSC/RCC/RSJ Pole by using JCB or manual

Excavation of pit in Hard rock requires without blasting(where houses are located)

Erection of RCC poles/PSC Poles /metal poles upto 27'(8.0m) pole by using JCB or manual

Erection of RCC poles/PSC Poles/metal poles above 8 mtrs pole by using JCB or manual

Erection of RSJ ,Rail and fabricated poles above 9.0m pole by using JCB or manual

Erection of stay set complete

Fixing of HT "V" cross arms (all types)/Channel cross arms/Guarding Cross arms

Fixing of LT 3 phase cross arms

Fixing of LT Single phase ph X arm

Fixing of HT/LT TI fittings

Fixing of HT Pin insulator 11 KV/22 KV

Fixing of HT Pin insulator 33 KV

Fixing of HT 11KV strain Disc

Fixing of HT 22KV strain Disc

Fixing of LT pin insulators

Fixing of LT shackle with MP

Fixing of Aluminium Knob

Earthing of pole with pin including burying ,looping and binding

Paving of Conductor, stringing, binding, jumpering etc., complete for lines with ACSR 7/4.09 mm

Paving of Conductor, stringing, binding, jumpering etc., complete for lines with ACSR 7/3.35 mm or AAAC 7/3.15 mm conductor

Paving of Conductor, stringing, binding, jumpering etc., complete for lines with ACSR 7/2.59 mm or AAAC 7/2.50mm conductor

ERECTION of Double Pole TRANSFORMER STRUCTURE COMPLETE inclusive of following works - Excavation of pole pits sizing 2' X 2' X 6'(2*475), erection of poles(2*550), Excavation of Stay pits (4*390) and Erection of stay set (4*210), erection of structure materials (Top Channel-Rs.250, Bed Channel-Rs.250,Cross with stud for bed Channel-Rs.120, Belting Angle-Rs.250) erection of AB switch (Rs.1000), HG Fuse (Rs.600) Structure Earthing complete (Rs.2100), Fixing of Open Type fuse units and feeder arrangements(Rs.900), HT/LT LAS fixing(Rs.350 and Rs.250) , Provision of bus-bar arrangement(Rs.500), Jumpering(Rs.400) Fixing of support inculator angle and erection of of 3 Nos pin insulators ( Rs.200) ( all T&P suchas crowbars, siling, DShackle etc., that must be brought by the contractor)(Labour for Structure Concreting, Stay Concreting,Painting, Fixing of name board / Danger Board, Erection of transformer, Transporting of Transformer , Fixing of DT meter ,Drilling of holes, Cutting,welding,alteration of clamps if anyand Provision of Earth pit collars are separately given).

Erection of Double Pole structure (D.P)- inclusive of following works - Excavation of pole pits sizing 2' X 2' X 6'(2*475), erection of poles(2*550), Excavation of Stay pits (4*390) and Erection of stay set (4*210), erection of structure materials (Top Channel-Rs.250) erection of AB switch (Rs.1000), Structure Earthing complete (Rs.1500), HT LAS fixing(Rs.350 ) , Jumpering (Rs.250) (all T&P suchas crowbars, siling, DShackle etc., that must be brought by the contractor)(Labour for Structure Concreting, Stay Concreting,Painting, Fixing of name board/Danger Board, (Drilling of holes, Cutting,welding,alteration of clamps if anyand Provision of Earth pit collars are separately given)

Erection of Single pole Transformer Structure-inclusive of following works - Excavation of pole pit sizing 2' X 2' X 6'(1*475), erection of poles 1*550), Excavation of Stay pits (1*390) and Erection of stay set (1*210), erection of structure materials (Tapping Channel-Rs.150, Transformer centre set arrangements-Rs.350) erection of AB switch (Rs.900), HG Fuse (Rs.400) Structure Earthing complete (Rs.2000), Fixing of Open Type fuse units and feeder arrangements(Rs.450), HT/LT LAS fixing(Rs.350 and Rs.250) , Jumpering(Rs.300) (all T&P suchas crowbars, siling, DShackle etc., that must be brought by the contractor)(Labour for Structure Concreting, Stay Concreting,Painting, Fixing of name board/ Danger Board.Erection of transformer,transporting of transformer, LT cable arrangements, fixing of DT meter. Drilling of holes, Cutting,welding,alteration of clamps if anyand Provision of Earth pit collars are separately given)

Guarding arrangements with Flat guarding including fixing of 2Nos. Cross arms HT/LT

Transport of poles/Materials/ conductors /DT/Metering Set and other materials( excluding loading and unloading charges.) below 8 Kms

Transports of poles /Materials /Conductors and other materials(excluding loading and unloading charges) for above 8 Kms for addl. Kms( Irrespective of weight in Tonage/KM

Loading of metal poles ( all sizes)

Unloading of metal poles ( all sizes)

Loading of poles up to 8 M RCC/PSC poles

Loading of poles above 8 m RCC/PSC poles

UnLoading of poles up to 8 M RCC/PSC poles

UnLoading of poles above 8 M RCC/PSC poles

Transporting of poles from road side to pole pit Location including loading and unloading of poles by using JCB or Manual Up to 100 m

Transporting of poles from road side to pole pit including loading and unloading of poles by using JCB or Manual above 100 m

Erection of street light including fixture fitting

Erection of street light service

Releasing of single phase service wire and re-fixing.

Releasing of 3 phase service wire (upto 50 HP) and re-fixing.

Releasing of 3 phase service wire (above 50 HP) and re-fixing.

Labour charges for alteration of Back clamps to suit for the works

Labour charges for alteration of Stay clamps to suit for the works

Cutting of coconut leaves /per tree

Cleaning of branches of tree per tree

Drilling of hole in channel only 3/4" & 1" per hole

Cutting of channel

Cutting of Angle

Cutting of pipe

Dismandling of pole above 8.0 mtr

Dismandling of pole up to 8.0 mtr

Dismandling of 'V' X arm(all types),channel X arm,guarding X arm

Dismandling of LT 3 phase X arm

Dismandling of LT single phase X arm

Dismandling of HT/LT TI fitting

Dismandling of 11KV strain disc

Dismandling of 11 KV/22KV pin insulator

Dismandling of 33 KV pin insulator

Dismandling of LT shackle

Dismandling of LT pin insulator

Dismandling of Aluminium knob

Dismandling of stay set

Dismandling of ACSR 7/3.35mm orAAAC 7/3.15 conductor

Dismandling of ACSR 7/2.59mm or 7/2.11mm conductor

Dismandling of street light service

Feeder arrangements with Open Type fuse Units per 1 Feeder