DFE Jobs

Amount

GENERAL JOBS

Replacement of worn-out of M.S. Runner of PCC, SCC, ICC, Elevator, RBC and cross carrier chains

Replacement of worn-out of M.S. guide angle (daab) of PCC, SCC, ICC, Elevator, RBC and cross carrier chains.

Replacement of S.S. tubes of all juice heaters, vapour line juice heater and semi-Kestner.

do but of all pans

do but of all evaporators

Welding joints of water, juice, vapour and exhaust pipe lines of all sizes, any tank, pans, condenser, evaporator body etc.

Pipe line upto 12” dia

Dismantling

Erection

Pipe line above 12” dia from MS plate

Dismantling

Fabrication

Erection

Bends from readymade pipe line up to 12" dia

Dismantling

Fabrication

Erection

Bends above 12” dia from MS plate

Dismantling

Fabrication

Erection

Tee, Nipples & Crosses upto 12” dia

Dismantling

Fabrication

Erection

Tee, Nipples & Crosses above 12” dia from M.S plate

Dismantling

Fabrication

Erection

Reducers of all sizes,

Dismantling

Fabrication

Erection

Flanges of all sizes,

Dismantling

Fabrication

Erection

Valves:

Dismantling

Erection

Fabrication

Man Holes of all sizes

Dismantling

Fabrication

Erection

Platform:

Dismantling

Fabrication & Erection

M.S. Structure work

Dismantling

Fabrication

Erection

M.S. Tank complete having round & conical & rectangular bottoms

Dismantling

Fabrication

Erection

M.S Rubber seated valves of any types

Dismantling

Fabrication

Erection

NRV of any type:

Dismantling

Fabrication

Erection

Platform Pipe Line railing of all sizes

Dismantling

Erection

Fabrication of S.S rubber seated valves and NRV of all sizes

M.S. Patch work

Fabrication and Erection M.S. stair;

Monkey tower type

Step type

Straightening M.S plate

Strengthening of any structure with M.S Angle/Channel

S.S. to S.S. welding

Fabrication and erection of all type of pump + motor bed.

MILL HOUSE

Drilling and Tapping of Mill’s top roller of square end face having size 8-20M at 265 PCD and 50mm deep thread for fitting of Ropeless coupling.

Dismantling, fabrication & erection of mills juice tray (M.S. Plate)

Fabrication of SCC and inter carrier chain’s rake.

Repair of Secondary Cane Carrier & inter Carrier Chain’s rake.

Fabrication of TRPF juice tray

Fabrication of TRPF top roller cover

Dismantling, fabrication and erection of Donnelly chute of mills

Fabrication and erection of mill roller crown pinion guard

Fabrication and erection of TRPF roller crown pinion guard

Complete repair of TRPF pressure chute, including replacement of worn out S.S. Plate

Fabrication of discharge roller scrapper assembly.

Replacement of worn out bottom boot of inter carrier chain.

BOILER HOUSE

Replacement of Cast Iron Furnace chute of J.T. and Texmeco Boilers.

Fabrication of RBC slats made out from 3 mm thick plate for both RBC Chain

Repair of RBC Slat

Replacement of M.S. Bagasse chute of J.T. and Texmeco Boilers.

Replacement of worn out furnace door of Taxmaco/ J.T. boilers.

do but door frame

Repair & fitting o furnace door of Texmaco/JT boiler

Fabrication of steam drum partition Plates of Boilers

Repair of steam drum partition Plates of Boilers

Boiler damper - Dismantling

Boiler damper - Fabrication

Boiler damper - Erection

Boiler damper - Repair

Replacement of Boiler Ducting

Replacement of economizer baffle Texmaco boiler

Modification of FD fan Motor bed along with strengthening of bed base structure

Modification of inlet ducting of APCD for Texmaco boiler

Repair work of bagasse adjusting gate

BOILING HOUSE

Replacement of worn out various types of strainers that of lime pumps, un-sulphured, syrup pumps etc.

Complete replacement of worn out save-all of evaporator bodies in all respects.

Complete replacement of worn out save-all of pans in all respects.

Replacement work of complete shell portion of any Pan beginning from Calenderia to taper portion including all connections.

Replacement work of complete taper portion of Pan from body to save all

Replacement of worn out vapour pipe of various sizes of pans going to condenser

Replacement of worn out steam/general coil of Ordinary design : size - 1/2'' to 3''

Replacement of worn out steam/general coil of Ordinary design : size - 4'' to 6''

Replacement of worn out steam/general coil of Pure circular design: size - 1/2'' to 3''

Replacement of worn out steam/general coil of Pure circular design: size - 4" to 6"

Dismantling, fabrication & erection of pans vapour pipe line bends leading from body shell to condensers. Rates to quoted in terms of Full Bend:- 900 mm

Dismantling, fabrication & erection of pans vapour pipe line bends leading from body shell to condensers. Rates to quoted in terms of Full Bend:- 1100 mm

Dismantling, fabrication & erection of pans vapour pipe line bends leading from body shell to condensers. Rates to quoted in terms of Full Bend:- 1250 mm

Dismantling, fabrication & erection of pans vapour pipe line bends leading from body shell to condensers. Rates to quoted in terms of Full Bend:- 1400 mm

Dismantling, fabrication & erection of pans vapour pipe line bends leading from body shell to condensers. Rates to quoted in terms of Half Bend:- 900 mm

Dismantling, fabrication & erection of pans vapour pipe line bends leading from body shell to condensers. Rates to quoted in terms of Half Bend:- 1100 mm

Dismantling, fabrication & erection of pans vapour pipe line bends leading from body shell to condensers. Rates to quoted in terms of Half Bend:- 1250 mm

Dismantling, fabrication & erection of pans vapour pipe line bends leading from body shell to condensers. Rates to quoted in terms of Half Bend:- 1400 mm

Replacement of gutters - Dismantling

Replacement of gutters - Fabrication

Replacement of gutters - Erection

Replacement of gutters - Repair

Replacement of worn out stirrer arms (Straight Type)

Replacement of worn out stirrer arms (Worm Type)

Replacement of worn out umbrella of pans

Replacement of all pipe line of sulphur burners cooler, complete in all respect.

Replacement of worn out portion of sulphur burner cooler inside pipeline.

Complete replacement of worn-out after burner of Sulphur furnace i.e including the replacement of internal pipe line also

Dismantling, Fabrication and erection of sulphur burner melter for sulphur furnaces.

Replacement of worn-out bagacilo pipe line made out from G.I. plain sheet of standard size

Replacement of Y type steam connection for syrup and molasses tank at pan station

Replacement of vacuum filter agitator

Fitting and modification of planetary gear box along with dismantling of existing gear system.

Replacement of worn out partition plates of headers of juice heaters, complete in all respect.

Replacement of S.S pipeline of any size:

Dismantling

Fabrication

Erection

Cone(Bottom saucer) of semi kestner

Dismantling

Fabrication

Erection

CENTRIFUGAL STATION

Replacement of Hopper trough

Replacement of complete portion of hopper tray

Replacement of molasses chute of Continuous Centrifugal machine.

Replacement of molasses chute of Batch type Centrifugal machine

Replacement of any worn out shell portion of pug mills/magma mixers

Modification of cooling coils of overhead crystallizer.

Fabrication & erection of magma pump/hi-flow pump foundation structure.

Modification of magma pump/hi-flow pump foundation structure.

POWER HOUSE

Fabrication & erection of cable tray

Replacement of switches/MCCB 630 AMP, 400 AMP, 250 AMP

Replacement/erection of changeover switch 630 AMP/400 AMP/ 250/ AMP