PROVN OF PATHWAY AND HARD STANDING NEAR FARS GATE GUARD ROOM AND WATCH TOWER AT FOD, BOUNDARY WALL WITH ALLIED INFRA FOR CE UDHAMPUR ZONE, ADDN/ALTN TO BLDG NO NP-55 AT NORTHERN COMD PRO UNIT AND CERTAIN MINOR WORKS UNDER GE (SOUTH) UDHAMPUR

Amount

Dismantling Asbestos cement (corrugated, semi-corrugated etc) sheets in roof covering complete all as specifed and directed.

Dismentling wrought iron or mild steel work of any description complete all as specified and directed

Rolled sections as in main and cross beam, hip and jack rafters, purlins where connected to common raters and fixed with angle cleats or other connecting plates confirming to Gde Fe 410-0 or Fe-310-0 complete all as specifed and directed.

Pre painted galvalume aluminium zinc coating GI based plain steel sheet 0.60 mm thick crimpted/tapard at the external end slop of any colour having tensile strength 550 Mpa as in roof covering fixed with self tapping screws and caps etc complete all as specified and directed.

Plain galvalume aluminium zinc coating GI based plain steel sheet 0.63 mm thick in ridges, hips, valley gutters at the external end slop of any colour having tansile strength 550 Mpa as in roof(ridges) covering fixed with self tapping screws and caps etc complete all as specifed and directed.

Mild steel screw bolt (machine made) 11 to 15 mm dia with hexagonal or square heads at one end and screw the other, or screwed both end to be fitted with washers and one hexagonal or sqaure nut exceeding 10 cm and not exceeding 15 cm long complete all as specifed and directed.

Dismantling/taking out existing hessain base felt or any other existing water proofing treatment from roof including cement plaster and exposing the top surface of RCC slab including removing the dismantled debris to a distance exceeding 200 m and not exceeding 250 m complete all as specifed and directed.

Plain cement concrete (1:2:4) type B-0 (using 12.50 mm graded aggregate) as in repair to paiding to roof, water troughs and the like including weathering, slightly to ascertain the proper slop complete all as specifed and directed.

Roughening surfaces of old concrete floor by picking up, sweeping, cleaning and washing down with water to remove dust including taking down tarfell and brushing neat cement slurry @ 3.0 Kg/Sqm including 10 mm thk screeding in CM (1:3) finished even and smooth mixed with water proofing compound (WPC shall be measured and paid separately). Applying bituminous primer on roof surfaces @ 0.40 ltr/Sqm and applying one coat of hot blown bitumen of grade 85/25 @ 1.20 Kg/Sqm and provide modified polymeric membrane 3.00,five layred APP (Atactic Polypropylene) modified Polymeric Membrane with 100 micron high molecular high density polyethylene film. Min wt of membrane will be 3.5 Kg/Sqm and bonded completely to the surfaces with min end overlap of 15 cms and side lap 75 mm (overlap to be bounded with thermo fused by flame) and over APP applying one coat of hot blown bitument 85/25 @1.2 Kg/Sqm blinded with fine sand in dry condition @ 0.5 Kg/Sqm and including two coats of aluminium paint complete all as specified and directed by Engr-in-Charge. Note :- Water proofing treatment will be done by manufacturer of APP membrane or through their authorised specialised agency which will further have to five a five years warranty for rectification of any defect if incurred at a later stage, otherwise no payment shall be made to the contractor if water proofing treatment is executed otherwise.

Supply only Integral Water proofing compound (WPC) complete all as specifed and directed.

Dismantling wall and ceiling boards (fibre, pulp, insulation etc) or insulation boards any thickness including cover fillets complete all as specifed and directed.

4 mm thick Cement fibre board (designer ceiling) of size 600 mm x 600 mm panel confirming to IS 14862 type-B category three including GI frame work with size of grid 605 mm x 605 mm for seanless ceiling comprises of GI perimeter including all accessories, the fibre sheet should be fire resistant, water resistant, termite resistant, environment friendly and 100% asbestos free complete all as specified and directed by Engr-in-Charge. Make of false ceiling board and GI Grid : Everest/V board or equivalent

Demolition of Brick work or stone/boulder masonry, built in cement mortar including all quoins, arches, pillars etc but excluding ashlar facings, dressed stonework and precast concrete articles complete all as specifed and directed.

Brick work with sub class "B" bricks straight or curved on plan exceeding 6 Metre mean radius in cement mortar 1:6 complete all as specifed and directed.

Taking down cement plaster on brick or stone walls etc including raking out joints, hacking for key, scrubbing down with water etc complete all as specifed and directed.

Rendering 15 mm thick in two layers (10+5) mm on brick or concrete wall surfaces in cement mortar 1:4, finished even and smooth without using extra cement complete all as specifed and directed.

15 mm thick plastering on brick or concrete wall surfaces in cement mortar 1:6 finished even and smooth without using extra cement complete all as specifed and directed.

5 mm thick plastering on brick or concrete ceiling surfaces in cement mortar 1:3 finished even and smooth without using extra cement complete all as specifed and directed.

Preparation of new plstered surfaces of walls and applying two coats of distemper oil emulsion over a coat of primer complete all as specifed and directed.

Preparation of old plstered surfaces of walls and applying two coats of distemper oil emulsion over a coat of primer complete all as specifed and directed.

Preparation new surfaces plastered or unplastered and applying three coats of white wash on ceiling complete all as specifed and directed.

Preparation of old painted plastered surfaces of walls of any description, over 10 cm girth or width including cornices and applying one coat of Acrylic weather proof exterior emulsion paint complete all as specifed and directed.

Taking down chowkhats or frames with shutters (without taking off shutters from frames) area exceeding 1.50 square metre and not exceeding 4.0 square meter each, including cutting holes for taking out fasts or dismantling brick work (holes cut and any other damage to jambs, wall for taking out hold fast shall be finished identical to existing finish any extra cost to Govt) complete all as specifed and directed by Engineer-in-Charge.

Taking down chowkats or frames with shutters (without taking off shutters from frames) area not exceeding 1.50 square meter each, including cutting holes for taking out hold fasts or dismantling brick work (holes cut and any other damage to jambs, walls for taking out hold fast shall be finished identical to existing finish without any extra cost to Govt.) complete all as specifed and directed by Engineer-in-Charge.

Dismantling of floor, hearth or wall tiling including cement mortar bedding (but not backing) and rubbish off the premises complete all as specifed and directed.

Plinth protection 50 mm thick in PCC 1:3:6, type C-1 (using 20 mm graded stone aggregate) laid in alternate bays (not exceeding 2 Sqm each) finished even and fair at top and providing jonts throughout the thickness of plinth protection, filled with mastic filling comprising one part of bitumen 85/25 grade and three parts of sand by weight complete all as specified and direted at site.

25 mm thick, Plain cement concrete 1:2:4 type B-0 (using 12.5 mm graded crushed stone aggregates) as in sub base complete all as specifed and directed.

15 mm thick screed bed or bedding layer in cement mortar 1:4 for laying floor finishes, complete all as specified and directed.

15 mm thick cement plaster on fair face of brick or concrete surface in cement mortar 1:3, finished even and fair, as in backing coat to receive tiles complete all as specifed and directed.

Non skid, coloured ceramic tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specifed and directed.

Glazed coloured ceramic tiles in vertical surface 350 x 250 x 7 mm/ 300 X 600X 7 mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match complete all as specifed and directed.

Solid PVC door frame of size 50 x 47 mm made out of 5mm wood grain printed PVC sheet used instead of colour PVC sheet and edges will be printed to match with printed sheets reinforced with M.S. square tube, supplying and fixing in opening complete all as specifed and directed in SSR Part-I, Section 8B.1.1.complete all as specified and directed.

Factory made solid PVC moulded door shutter with particle board core, 28 to 30 mm thk (stiles), with 2 to 4 or 6 raised panel design with 2 mm thick 3D wood grain moulded PVC sheet polyurethane painted on the front face and 2 mm plain colour PVC sheet on back face complete all as specifed and directed in SSR Part-I, Section 8B.1.1

Aluminium anodised, barrel tower bolts of extruded section 150 mm long complete all as specifed and directed.

Aluminium alloy handles, fabricated type, anodised 150 mm size complete all as specifed and directed.

Butt hinges medium weight 100 mm size complete all as specifed and directed.

Aluminium alloy, anodised, 150 mm sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruted sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specifed and directed.

Galvanised mild steel wire cloth having 0.56 mm nominal dia of wire and average width of aperture 1.18 mm fixed with tinned tacks or galvanised wire staples complete all as specifed and directed.

Taking up or down 15 mm bore steel tubing with connections for cleaning for refixing or removing to store yard complete all as specifed and directed .

Taking up or down 20 mm bore steel tubing with connections for cleaning for refixing or removing to store yard complete all as specifed and directed.

15 mm bore galvanised steel water tubing medium grade (ISI Marked) with all fittings and fixed complete to walls and or laid under floors etc complete all as specifed and directed.

20 mm bore galvanised steel water tubing medium grade (ISI Marked) with all fittings and fixed complete to walls and or laid under floors etc complete all as specifed and directed.

Refixing old 15 mm dia steel water tubing medium grade galvanised and connections in new or old position (walls, ceiling, floor etc.) complete all as specifed and directed .

Refixing old 20 mm dia steel water tubing medium grade galvanised and connections in new or old position (walls, ceiling, floor etc.) complete all as specifed and directed.

Plain cement concrete 1:3:6 type C-1 (using 20 mm graded crushed stone aggregates) as in surface channels and drains complete all as specifed and directed.

110 mm dia PVC (SWR) pipes single socketed, in any length with rubber ring joints, fixed to walls complete all as specifed and directed.

CP waste cupling 32 mm dia (Half thread) including waste pipe complete all as specifed and directed.

Grating doom 100 mm dia of PTMT (Minimum weight 25 gms) complete fixed as in repair all as specifed and directed.

Half stall Urinal Large size 420 x 395 x 635mm snow white colour complete fixed as in repair all as specifed and directed. Make : Cera /Prayag/Parryware

Pillar taps, cast copper alloy ,with capston heads ,chromium plated,screwed down high pressure,with or without lettered 'Hot or cold' with long screwed shanks and fly nuts,screwed for iron pipe and fixed 15 mm bore complete fixed in repairs all as specifed and directed.

15 mm bore brass valve high pressure with polythene float and fly nuts complete screwed for iron pipe or brass ferrule complete fixed in repairs all as specifed and directed.

CP Soap dish complete fixed in repairs all as specifed and directed.

Vitreous china squatting pan, Orissa pattern, icluding cement concrete bedding, size 580 x 440 mm white with integral foot rests excluding flushing cistern and flush pipe but including connection to trap anti syphonage pipe etc. complete, fixed in repairs complete all as specifed and directed.

Vitreous china was basin, angle cock including cutting for and pinning in ends of brackets or erecting stand of size 600 x 480 mm white but excluding taps, waste, chain and plug and porcelain stopper but including brackets fixed as in repair complete all as specified and directed.

15 mm bore CP Angle valve with flange complete fixed in repairs all as specified and directed.

PVC connection 15 mm bore with ptmt nuts of length 450 mm complete fixed in repairs all as specifed and directed.

Fancy type chromium plated stop valve cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions chromium plated of size 15 mm with long shank and cup (concealed type) complete all as specifed and directed.

Towel rail 450 mm long chromium plated fixed with and including chromium plated screws complete fixed in repairs all as specified and directed.

15 mm bore chromium plated Bib cock with wall flange and aerator complete all as specifed and directed. Make : Hindware/Cera/Prayag

Self closing angle cock pressmatic for urinal with flange and 200 mm connecting pipe and spreader complete all as specifed and directed.

Brass chromium plated shower rose 75 mm size with swivel joint fixed to pipe or union of 15 mm bore complete fixed in repairs all as specifed and directed.

Sand cast iron 'P' or S trap 100 mm bore for ind type w/c complete all as specified and directed.

75 mm bore cast iron floor trap with grating including jointing to waster pipe fixed in cement concrete type B-1 1:2:4 ( using 12.50 mm coarse aggregate ) complete all as specifed and directed.

75 mm bore sand cast iron pipes in any length with or with out ears with cement joints laid in trenches or in floors complete all as specifed and directed.

50 mm bore sand cast iron pipes in any length with or with out ears with cement joints fixed to walls complete all as specifed and directed.

100 mm bore sand cast iron pipes in any length with or with out ears with cement joints fixed to walls complete all as specifed and directed.

100 mm branch pieces single (equal or un equal) ordinary or inverted (spigot or socket type) or parallel branches complete all as specifed and directed.

100 mm branch pieces double (equal or un equal) oridinary or inverted (spigot or socket type) or parallel branches complete all as specifed and directed.

Cast iron oval door 75 mm bore acess for CI bends or junction complete all as specifed and directed.

Cast iron oval door 100 mm bore acess for CI bends or junction complete all as specifed and directed.

Dismantling water Tanks exceeding 500 ltrs and not exceeding 1000 ltrs complete all as specifed and directed.

10 ltrs capacity PVC valve less symphonic action type, low level flushing cistern, white, with inlet, ball valve float and handle including brackets complete all as specified and directed. Make : Hindware/Cera/Prayag

Surface excavation not exceeding 30 cm deep and averaging 15 cm and getting out hard/dense soil complete all as specified and directed.

Hard core of broken stone or boulders of gauge exceeding 63 mm but not exceeding 100 mm deposited, spread and levelled in layers not exceeding 15 cm thick, watered and rolled/rammed to true surface complete all as specified and directed.

Precast plain cement concrete 1:2:4 type B-1 (using 20 mm graded crushed stone aggregates) as in solid blocks i.e. kerb stone, exceeding 10 cm width and set in cement mortar 1:4 complete all as specified and directed.

Cement concrete type C-2 1:3:6 (40 mm crushed graded stone aggregate) in foundation filling and mass concrete, spreading levelling complete all as specified and directed.

Sand cushioning under floors or in foundation including watering and consolidation complete all as specified and directed.

Machine pressed precast cocrete interlocking cement paver block, any shape and size confirming to IS 15658-2006 of 60 mm thickness, M-35 Grade with, topping of cement mixed with imported pigment, colour and shape shall be approved and complete all as specified and directed by GE, ISI Marked.

Preparation of surfaces and applying two coats of synthetic enamel paints over a coat of priming paints on plaster / concrete surfaces complete all as specified and directed.

Returning, filling soil in, including spreading, levelling, watering and well ramming in layers not exceeding 25 cm thick complete all as specified and directed.

Removing excavated materials (soils) to a distance 500 m or part there of beyound 500 m and up to total distance of 1.5 KM and deposited where complete all as specified and directed.

Excavation over areas not exceeding 1.5 m deep and getting out as in any type of soil complete all as specified and directed.

Excavating in trenches, not exceeding 1.5 m wide and not exceeding 1.5 m in depth for foundation etc, or for shafts, wells, cesspit, manholes,pier holes etc not exceeding 10 sqm on plan and not exceeding 1.5 in depth and getting out in soft/loose soil complete all as specified and directed.

PCC (1:4:8) type D-2 (using 40 mm graded stone aggregate) as in foundations and mass concrete complete all as specified and directed.

Brick work with sub class "B" bricks straight or curved on plan exceeding 6 Metre mean radius in cement mortar 1:4 complete all as specified and directed.

Form work to sides of footings,foundation,footings,base of column,raft and raft beams,sides and soffits (if any) of foundation and plinth beam,and similar work rough finished flat surfaces complete all as specified and directed.

Form work to sides of pillar ,post ,struts, pier columns etc rough finished surfaces complete all as specified and directed.

RCC M 25 design mix, (using 20 mm graded stone aggregate) as in foundation filling and mass concrete complete all as specified and directed.

RCC M 25 design mix, (using 20 mm graded stone aggregate) as in columns, pillars, piers, posts and struts complete all as specified and directed.

TMT bars 10 mm dia and over cut to lenth, bent to shape required, including cranking, bending, spirally for hooping for columns, hooking ends and binding waith and including mild steel wire (annealed) not less than 0.9 mm dia complete all as specified and directed.

TMT bars 6 to 8 mm dia as in reinforcement cut to length, bent to shae required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (anealed not less than 0.9 mm dia) complete all as specified and directed.

RCC M-25 design mix (using 20 mm graded aggregate) as in beams, lintels complete all as specified and directed.

Form work to sides and soffits of floor or roof beams, lintels etc rough finished surfaces complete all as specified and directed.

Preparation of new plastered surfaces and applying two coats of cement based paint complete all as specified and directed.

110 mm dia PVC (SWR) pipes single stack in any length as in weepholes of retaining wall complete all as specified and directed.

Moorum/red bajri filling in floors or pavings, laid in layers not exceeding 15 cm thick spread, levelled and rammed including watering complete all as specified and directed.

Cement concrete 75 mm thick type D-2 1:4:8 (using 40 mm graded aggregate) as in sub base or sub floor etc complete all as specified and directed.

Screed bed or bedding layers of 20 mm thick cement mortar 1:4 for laying floor finishes complete all as specified and directed.

Chequered cement concrete tiles 30 cm x 30 cm x 25 mm thick with green cement and pigment, set jointed and pointed in neat cement slurry complete all as specified and directed.

Precast cement concrete type B-0 1:2:4 (using 12.5 mm graded crushed stone aggregates) louvres and jallies 50 mm thick (measured solid inluding all mouldings) set in cement mortar 1:6 complete all as specified and directed.

Framed work as in doors or gates of angle or other section with gusset plates, rails, braces etc complete, drilled for fixing of steel sheeting or other covering, Doors etc to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and handing, also fastening and fixing complete such as fencing posts, supporting flat iron strips, nut bolts, gates confirming to Fe 410-W (Gde-E-250) Quality etc complete all as specified and directed.

Excavation in Post holes any type of soil (or similar holes) each not exceeding 0.5 cum, getting out, returning filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm, watering and removing surplus soil to a distance not exceeding 50 m and making good surface complete all as specified and directed.

Cement concrete 1:2:4 type B-2 (using 40 mm graded crushed stone aggregates) as in Post, column, piller boundry piller including caps and bases complete all as specified and directed.

Steel work in any type of Hollow/rectangular /Square tubular trusses, Post and other including special shaped washer etc, complete using ERW or induction butt welded tubes confirming to IS-S.1161-1979 grade St-240 complete all as specified and directed.

MS plate or girders Fe-410-W Grade E-250 Quality B fixed with truss col or any independent structure complete necessary welding cutting drilling etc complete all as specified and directed.

Preparation of new steel and iron surfaces exceeding 10 cms width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.

0.63 mm Galvanised corrugated mild steel sheeting with two corrugations side lap, fixed with self tapping screws and washers complete all as specified and directed.

Providing 80 mm thick cement concrete 1:2:4 type D-2 (using 40 mm graded crushed stone aggregates) as in floor/ sub-base complete all as specified and directed.

Forming 12 mm thick expansion joints filled with pre-formed bituminous filler and top 30 mm primed and sealed with sealing compound Grade "A" and thickness of concrete slab in 100 mm complete all as specified and directed.

PCC 1:2:4 type B-1 (using 20 mm graded aggregate) in surafce channel and drains complete all as specified and directed.

Extra for forming fair finished drain or channel 30 cm inner girth in cement concrete, using extra cement, including forms moulds, mitered/stopped ends etc complete all as specified and directed.

50 mm thick cement concrete 1:2:4 type B-1 (using 20 mm graded crushed stone aggregate) as in plinth protection laid in alternate bays (not exceeding 2 sqm each) area with 6 mm wide joints and 10 mm wide joints between the walls and plinth protection, finished even and smooth without using extra cement, outward slope of not less than 1:12, the joints shall be filled with mastic filling comprising one coat of bitumen 85/25 grade and three parts of sand by weight complete all as specified and directed.

Providing cement concrete 1:2:4 type B-0 ( using 12.50 mm graded aggregate) in steps, seismic and other similar bands, parapets and railings up to 60 cm in hieght, coping, kneeless apex stones , bed plates, kerbs not provided for including weathering, slightly rounded or chamfered angles complete all as specified and directed.

Steel water tubing of nominal bore dia 20 mm medium grade galvanised with all fittings including short lengths, fixed to walls, concealed in wall and ceiling or laid in floor complete with all fittings( such as bends, elbows, Tee, short pieces, connectors, back nuts, diminishing pieces, caps and plugs, unions etc.) complete all as specified and directed.

20 mm dia Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and directed.

Rotational moulded polyethylene water storage tank 1000 ltrs capacity (cylinderical vertical with threaded cap) hoisted and fixed in position all as specified in SSR Part-I including 20 mm bore dia ball valves high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe and fixed (minimum weight 20 mm-210 gm complete all as specifed and directed.

Taking down carefully, copper/aluminum point wiring (light, fan, socket or power) complete fitting such as switch, sockets, ceiling rose, pendants socket any type, rectangular board terminal boxes etc and making good disturbed surfaces of walls floors and ceiling complete all as specifed and directed.

Point wiring for one light point/fan point/ bell point controlled by one switch with 1.5 sqmm PVC insulated FRLS unsheathed copper conductor single core multi stranded flexible copper cable 1100V grade in and including not less than 2.00 mm thick and 20 mm dia Non metallic Rigid PVC surface/Concealed Conduit (ISI marked) with and all accessories 1.5 mm thick mild steel terminal boxes concealed on walls, painting the same inside and out side with one coat of black bitumen paint with 3 mm thick hylam brand bakelite sheet cover for fixing of piano switches /sockets/regulator etc along with PVC insulated and unsheathed FRLS 1.5 sqmm multi stranded copper conductor cable (green color) as earth lead & connected to common earth and earthdolly, making good the disturbed surface to match with the existing specification complete all as specified and directed by Engr-in-Charge. Make - KEI or equivalent make in polycab/finolex

All as per ser item No 120 But for one light point control by two no two way switches with other Independent Board with 1.5 sqmm PVC insulated unsheathed FRLS copper conductor single core multi strand flexible cable and 1.5 sqmm PVC insulated unsheathed FRLS copper conductor single core cable (green color) as earth lead or & as directed by Engr-in-Charge to match with the existing specification complete all as specifed and directed. Make - Anchor or equivalent make in polycab/Havells

All as per ser item No 120 but for one 3 pin 5 Amp socket outlet point controlled by one push button on same board complete all as specifed and directed. Make - Anchor or equivalent make in polycab/ Havells

All as per ser item No 120 but for one 3 pin 5 Amp socket outlet point controlled by one push button on independent board complete all as specifed and directed. Make - Anchor or equivalent make in polycab/Havells

All as per ser item No 120 but for one 3 pin 15 A socket outlet on independent Board with PVC insulated unsheathed FRLS cable 4 sqmm copper multistrand conductor, along with PVC insulated and unsheathed FRLS 2.5 Sqmm multistrand copper conductor earth wire connected to common earth and earth dolly complete all as specifed and directed. Make - Anchor or equivalent make in polycab/finolex

Switch piano flush button single pole one way 5 amps 240 volt complete all as specified and directed.

Two way switch 5 Amps,230 volts complete all as specifed and directed. Make - Anchor/Havells/Kinjal

Socket outlet 2 in 1, 3 pin, 5A, 240 Volt complete all as specified and directed.

Switch socket combination 5 Amps 2-in-1, 5 Pin flush type, 230 volts complete all as specified and directed.

Switch socket combination 5 pin 16 amp, flush type complete all as specified and directed.

Ceiling rose surface bakelite 3 terminals complete all as specified and directed. Make : Cona Cat Part No 2126/SSK Cat Part No 572 or equivalent of make in Havells/Anchor/Kolors.

Fan regulator electronic, stepped type hum free suitable control speed of fan from 0 to 100 % and connecting electrically complete all as specified and directed.

Taking down ceiling fan/Exhaust Fan including disconnection of existing connection, dismantling of blades and Painting of ceiling fans complete, in situ with synthetic enamel paint by spraying including filling cavities with filler, one coat after cleaning all dust etc. and rehanging the fan complete all as specifed and directed.

LED tube light fitting 4 feet Garnet 20W Batten LED, Housing made of extruded AL with lumen O/P should not be less than 100 lum/watt making all connection using flexible cable of suitable size from ceiling rose to fitting complete all as specifed and directed. Make - Wipro, Product code - D532065 or Equivalent make in C&S/Havells

9 watt LED Bulk Head fitting complete making all connection using flexible cable of suitable size from ceiling rose to fitting complete all as specifed and directions of Engr-in-Charge. Make - Syska LED Cat Part No - SSk-BH-9W or equivalent make in Havells, wipro, C&S.

LED tube light fitting 2 feet Garnet 10W Batten LED, Housing made of extruded AL with lumen O/P should not be less than 100 lum/watt making all connection with suitable size flexible cable from ceiling rose to fitting complete all as specifed and directed. Make - Wipro, Product code - D531065 or Equivalent make in C&S/Havells

Replacement Sheet metal enclosure MCB distribution board single pole and neutral 240 volts 8 way with IP-43 IK-09 protection double door complete with appropriate size bus bar and neutral link, fixed flush in wall including chases wall for fixing DB and making good distributed wall surfaces to match with existing specification complete all as specified and directed. Note - MCBs will be measured separately.

Replacement MCB Single Pole, 230 Volt, B-Series, Raiting 6 to 32 Amps complete all as specifed and directed. Cat Part No : 810005 Make : Indoasian or equivalent make in Havells/Legrand Note : MCBs reuired to fix in existing DBs

Replacement MCB Single Pole and Neutral, 230 Volt, B-Series, Raiting 6-32A complete all as specifed and directed. Cat Part No : 810014, Make : Indoasian or equivalent make in Havells/Legrand.

MCB TPN 415 volts, 10 KA, 32 Amps complete all as specifed and directed. Cat Part No : 810098, Make : Indoasian or equivalent make in Havells/Legrand.

Replacement sheet metal enclosure MCB distribution board Triple pole and neutral 240 volts 4 way with IP-43 IK-09 protection double door complete with appropriate size bus bar and neutral link, fixed flush in wall including chases wall for fixing DB and making good disturbed wall surfaces complete all as specifed and directed. Make - Indo Asian/Havells/ Legrand.

Sub main wiring with two single core PVC insulated with copper conductor cable stranded of size 6 Sqmm in PVC concealed conduit 25 mm dia including PVC insulated copper conductor cable 4 Sq mm as earth lead complete all as specifed and directed. Including taking down old sub main wire.

Earthing complete with galvanised steel earth plate electrode 60 cm x 60 cm x 6.30 mm thick buried directly in ground (earth pit not less than 2.25 Mtrs below normal ground level) with top edge of the plate not less than 1.5 mtr below normal ground level, connected to galvanised earth lead 4 mm dia by means of bolts, check nuts and washers of galvanised iron or steel all as shown in electrical plate No 5 connected to earthing test point all as specified and indicated and testing on completion including excavation earth work drilling holes for electrode PCC pit & cover, funnel, water pipe lugs GI pipe medium grade protection pipe for earth lead up to DBs complete all as specifed and directed.

Exhaust fan 300 mm sweep SP, AC, 230V including making hole of suitable dia in existing wall and all necessary connection from ceiling rose to fan complete all as specifed and directed by Engr-in-Charge.

khajuria builders

VARDHMAN INTERNATIONAL

SODHI TRADING CORPORATION

verinder kumar gupta

VIRINDER SINGH

s l sharma and sons

M/S R.K SUPPLIERS

PARDEEP SHARMA