Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹11.4 LAccepted-AOC 140 DEORISINGHPURA RANIPUR JHANSI JHANSI UTTAR PRADESH 284205 | JHANSI | UTTAR PRADESH | 284205 | L1 | Accepted-AOC Lowest Bidder | |
| 2 | L2₹15.0 L+₹3.2 L (27.7%)Rejected-Finance NEW ABADI KISHANPURA SURATGARH 335804 DISTT SRIGANGANGAR RAJ | GANGANAGAR | RAJASTHAN | 335804 | L2 | Rejected-Finance Other than lowest bidder |
Tender Value
Refer Docs
EMD Value
₹30,000
Closing Date
26 Aug 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Lt Col Priyesh Srivastava
GE AF Suratgarh
REPAIR TO E/M INSTALLATION OF TECH AREA AT AF STN SURATGARH
2023_MES_610846_1
8089/E8
Open Tender
Civil Works
Item Rate
180 days
GE AF Suratgarh
As per tender Documents
10 documents required · 10 mandatory
₹500
GE AF Suratgarh
₹30,000
Yes
25 Sept 2023
27 Jul 2023
28 Aug 2023
27 Jul 2023
26 Aug 2023
12 Aug 2023
Amount
BOQ (REPAIR TO E/M INSTALLATION OF TECH AREA AT AF STN SURATGARH. )
Dismantling floor hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed.
M&L for glazed colour ceramic tiles in vertical surface 300mm x 450 mm x 7mm thick set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 10mm thick rendering in cement mortar 1:4 complete all as specified and directed.
M&L for glazed ceramic coloured tiles of size 200mmX 300mm X 7mm thick as in vertical surfaces set and jointed in neat cement slurry and pointed in white cement to match over and including 10mm thick rendering in cement mortar 1:4 complete all as specified and directed.
M&L for white ceramic non-skid tiles area of tiles exceeding 0.06 sqm but not exceeding 0.11 sqm and 7mm-8mm thick laid in floors, set and jointed in neat cement to match the shade over and including 15mm thick screed bed in cement mortar 1:6 for laying floor finishes complete all as specified and directed.
M&L for white ceramic non-skid tiles area of tiles exceeding 0.11 sqm but not exceeding 0.18 sqm and 7mm-8mm thick laid in floors, set and jointed in neat cement to match the shade over and including 15mm thick screed bed in cement mortar 1:6 for laying floor finishes complete all as specified and directed.
M&L for vitrified ceramic tiles light shade 10mm thick( square/rectanguler) polished area of each tile not exceeding 0.36sqm in floor etc set and jointed in neat cement slurry and pointed in white or coloured cement to match tiles over and including 15mm thick screed bed in cement mortar 1:6 for laying floor finishes complete all as specified and directed.
M&L for machine cut kota stone slab flooring 20mm-25mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab and including 20mm thick screed bed in cement mortar 1:6 for laying floor finishes etc and including rubbing and polishing including demolition of stone slab and tiles of any description or thickness complete all as specified and directed.
M&L for kota stone slab 20mm-25mm thick in riser of steps, skirting, dado and pillar laid over cement screed and jointed with grey cement slurry mixed with pigment to match the shade of the slab over and including 10mm thick rendering in cement mortar 1:4 and including rubbing and polishing including demolition of stone slab and tiles of any description or thickness complete all as specified and directed.
M&L for granite tile 20mm thick machine cut, bedded and jointed with grey cement slurry and pointed with white/coloured cement with admixture of pigment to match the shade of granite stone including cutting and polishing etc and including 20mm thick screed bed in cement mortar 1:6 for laying floor finishes etc complete all as specified and directed.
All as per ser item No. 09 here in before but on dado/skirting over and including 10mm thick rendering in cement mortar 1:4 complete all as specified and directed.
M&L for 20mm thick granite (of any type) work (table rubbed and polished) in platforms/stair case/ Countertop including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite including rounding off/curving the edges of granite stone & polishing and including 20mm thick screed bed in cement mortar 1:6 for laying floor finishes etc complete all as specified and directed.
Taking down chowkats with shutter (without taking off shutter from the frame) exc 1.5 sqm but not 4 sqm each complete all as specified and directed.
Taking down chowkats with shutter (without taking off shutter from the frame) not exc 1.5sqm each complete all as specified and directed.
Taking down shutters of any description but exc 1 sqm and not exc 2 sqm each and refixing in same opening complete all as specified and directed.
Taking down chowkats or frames exc 1.5sqm but not exc 4 sqm each complete all as specified and directed.
S&F for pressed steel frames for doors with one or more related including necessary fixing lugs, hinges look strike plate etc. as specified size of frame105mmx60 mm complete all as specified and directed.
S&F for pressed steel frames for doors with one or more rebated incl. necessary fixing lugs, hinges strike plate etc. complete as specified size of frame 125mmX60mm complete all as specified and directed.
M&L for PCC 1:2:4 type B0 (using 12.5mm graded stone aggregate) as in hold fast iron fixing and back filing of pressed steel door frame including necessary form work complete all as specified and directed.
S&F for framed work of rolled mild steel conforming to Fe-290 (GdeE165) as in doors or gates of angle or other section with gusset plates, rails, braces, etc, drilled for fixing of steel sheeting or other covering; doors etc to be prepared for hanging or sliding with and including either hooks & hinges or steel hanging door fittings (exclusive of steel sheeting, running rails & guides) and hanging, fastening & fixing complete all as specified and directed.
S&F 35 mm thick 2nd class Hard wood plain framed, panelled shutter (two panel) with lock rail and panel of 9 mm B.W.P commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS: 1003 (Part I), kiln seasoned and chemically pressure treated complete all as specified and directed by Engineer-in-Charge.
S&F for 35mm thick 2nd class hardwood glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edge of framing plain, chamfered or rounded, fitted with cut and mitred beds for securing glass, etc.; sizes of members of shutters as specified in SSR Part I, Section 8. clause 8.20 (a); supplied and fitted to chowkats complete all as specified and directed.
S&F for 35mm thick flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and directed.
S&F for mild steel butt hinges of size 100mm, medium weight, cold rolled complete all as specified and directed.
S&F for 300mm mild steel sliding door bolts, plate type, stove enamelled black, with bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate complete all as specified and directed.
S&F for mild steel barrel tower bolt 200mm, long stove enamelled black with bright bolts complete all as specified and directed.
S&F for mild steel pressed handles 150mm, long oval type, stove enamelled black complete all as specified and directed.
M&L for preparation of new wooden surfaces.and applying two coats of synthetic enamel painting to wood and wood based surfaces of any description, not otherwise described over 10cm width or girth over one coat of pink primer complete all as specified and directed.
S&F for steel window with side hung shutter including projecting type hinges with steel handle, and steel peg stay, complete with glazing bars, dovetailed or welded complete all as specified and directed.
S&F for steel ventilator with top hung shutter including hinges with steel peg stay, complete without glazing bars, complete all as specified and directed.
M&L for preparation of new steel surfaces and applying two coats of synthetic enemel painting to iron and steel surfaces of any description over a coat of red oxide not otherwise described over 10cm width or girth complete all as specified and directed.
Providing and fixing powder coated aluminium (minimum thickness of powder coating 50 micron) work for doors, Windows ventilators and partitions (Fixed portions) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws, all complete as per architectural drawings complete all as specified and directed.
S&F for 4.8mm thick sheet glass, ordinary quality and in square exc 0.5 sqm in each pane in any position complete all as specified and directed.
S&F in repair door closer hydraulically regulated, design No 3 universal type suitable for door shutter 851mm to 1000mm in width and of weight 61kg to 80kg each cast iron body complete all as specified and directed.
Hacking out old broken glass (any thickness , size , quality or description) from metal frame including punching or drilling out old glazing pins /spring clips and provding and fixing new ones, complete all as specified and directed.
S&F for 3mm thick plain sheet glass ordinary quality & glazing with oil putty in square n exc 0.50sqm in each pane, complete all as specified and directed.
S&F for frosted sheet glass 3mm thick, ordinary quality and glazing with oil putty (in metal frames etc) in squares not exc 0.5sqm in each pane, complete all as specified and directed.
S&F in repair stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and directed.
S&F for stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and directed.
Demolition of brick work or stone/boulders masonry built in cement mortar complete all as specified and directed.
M&L for brick work with sub class 'B' bricks, straight or curved on plan exc 6 m mean radius built in cm 1:6 complete all as specified and directed.
All as per ser item No. 40 here in before but except brick complete all as specified and directed.
M&L for painting of treated surfaces to recieve two coat of distemper oil emulsion on surfaces of walls and ceiling complete all as specified and directed.
Taking up or down 15mm dia steel tubing and connections, including cleaning for refixing or removal to store complete all as specified and directed.
Taking up or down 20mm dia steel tubing and connections, including cleaning for refixing or removal to store complete all as specified and directed.
S&F for 15mm GI tubes medium grade with all fitting and fixed complete to walls and ceiling or laid in floor complete all as specified and directed.
S&F for 20mm GI tubes medium grade with all fitting and fixed complete to walls and ceiling or laid in floor complete all as specified and directed.
Re-fixing steel water tubing of 15mm bore, with all fittings at new or old position, laid in floor along wall or at ceiling, complete all as specified and directed.
Re-fixing steel water tubing of 20 mm bore, with all fittings at new or old position, laid in floor along wall or at ceiling, complete all as specified and directed.
M&L for cutting chases for concealed water tubing or pinning end etc and making good the facing /cutting in cm 1:3 width exc 10cm but not exc 20cm girth in brick walls etc complete all as specified and directed.
Demolition of cement concrete of any description and in any position not otherwise specifically provided for complete all as specified and directed.
M&L for 25mm thick PCC 1:2:4 type B1 (using 20mm graded aggregate) as in floor finished surfaces fair and even to receive tile complete all as specified and directed.
M&L for 75mm thick PCC 1:3:6 type C2 (using 40 mm grade aggregate) as in plinth protection / paving finished fair and even without using extra cement complete all as specified and directed.
Demolition of RCC of any description in any position not otherwise specially provided for (reinforcement cut as required to facilitate demolition) complete all as specified and directed.
M&L for providing reinforcement cement concrete 1:2:4 type B1 (using 20mm graded stone agg) as in slabs/ beams/ column in floors balconies, canopies, desc slabs and the shelves and the like, complete all as specified and directed.
M&L for RCC chajjas 1:2:4 type B0 (using 12.5mm graded aggregate) as in approved design complete all as specified and directed.
Use and waste of formwork to soffits of suspended slab such as roof slab, floor slab, landing and similar work not exc 200mm thick (Horizontal or sloping) flat in fair finished surfaces of concrete, complete all as specified and directed.
Use and waste of formwork to cornices and mouldings of any shape in cross section and any girth in fair finished surfaces of concrete complete all as specified and directed.
Use and waste of formwork to edges of concrete flats, treads breaks in floor, window cills, concrete railing, openings in concrete walls, floor and roofs and similar works exc 5cm but not exc 10cm wide rough finish surface of concrete complete all as specified and directed.
Use and waste of formwork to edge of concrete flats, breaks in floors, opening in concrete walls,floors and roofs and side of RCC/PCC bands in walls ad similar works not exc 20cm thick, complete all as specified and directed.
S&F for mild steel TMT bars 10mm dia and over , cut to length, bent to shape required, including cranking bending and binding with mild steel (anneal) wire not less than 0.90mm dia. complete all as specified and directed.
S&F for mild steel TMT bars 8mm dia , cut to length, bent to shape required, including cranking bending and binding with mild steel (anneal) wire not less than 0.90mm dia. complete all as specified and directed.
S&F for rotational moulded polyethylene water storage tank ISI marked (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part-I of capacity 500 ltrs including dismantling existing water tank and removing to store complete all as specified and directed.
S&F in repairs 20mm bore dia nipple suitable for HDPE water tank. (minimum weight 20mm-45gms) complete all as specified and directed.
S&F in repair 20mm bore Ball brass valves, high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule and fixed complete all as specified and directed.
S&F in repairs ball valve of 20mm bore high pressure of PTMT with epoxy coated Aluminium rod & high density plastic ball screwed for iron pipe and fixed. (Minimum weight 210 gms) & fixed, complete all as specified and directed.
Dismantling structural steel work including doors, gates and plate but excluding framed truss etc complete all as specified and directed.
Dismantling asbestos cement (corrugated, semi corrugated etc.) sheets in roof coverings complete all as specified and directed.
S&F for mild steel work in tubular trusses including special shaped washers etc., complete using but ERW or induction butt welded tubes confirming to IS 1161- 1979 graded St 240 with one shop coat of zinc chromate primer paint, complete all as specified and directed.
S&F for rolled mild steel plates (plain or chequered) channels, square cut or notched, forming holes, with riveted, bolted or welded attachment confirming to Fe 410 - W complete all as specified and directed.
S&F for mild steel for framed structure like trrussed, purlins, crane gantries,post rails and fastenings and heavy bracket framming (Beam,Tee, Angle, Channels, flate sections) including distance pieces, cleats etc conforming to Fe410-W (Gde-E-250) quality-A complete all as specified and directed.
M&L for 6mm thick asbestos cement sheet, corrugated, or semi corrugated sheets in roofs, walls etc. and fixed with L hook or cranked bolts complete all as specified and directed.
M&L for pre painted galvanlume aluminium zinc coating having GI based corrugated steel sheets 0.50mm thick of any colour as in tensile strength of 550 Mpa as in roof covering/cladding to wall fixed with self tapping screw complete all as specified and directed.
S&F for mild steel screwas bolt (Machine made) with hexagonal or square heads one end screwed , each screwed end have one washer and one nut, dia of shank 11-15mm and length of bolt exec 5cm and not exec 10cm, complete all as specified and directed.
S&F for mild steel flat iron as wind tie for roof including necessary drilling for securing bolts etc complete all as specified and directed.
Demolition of stone slabs and tiles of any description or thickness in floors, aprons etc, laid dry or laid dry and pointed complete all as specified and directed.
M&L for coloured designer chequered cement concrete tiles 300mmX300mmX25mm thick, set, jointed and pointed in neat cement slurry in floors with grey cement and pigments complete all as specified and directed.
M&L for machine pressed precast concrete interlocking paver block ISI marked any shape and size confirming to IS 15658-2021 of 80mm thickness, M-35 grade with grey cement and pigment complete all as specified and directed.
M&L for sand filling under floors or in foundations including watering and consolidation complete all as specified and directed.
M&L for PCC 1:4:8 type D-2 (using 40mm graded stone aggregate) as in foundation , filling and mass concrete complete all as specified and directed.
Dismantling of wall and ceiling or insulation boards/ slabs / PVC panelling any thickness and in any position incl frame grid and cover fillets and framework etc complete all as specified and directed.
M&L for designer type gypsum ceiling board / mineral fibre board of size 595mm x 595mm x 7mm-8mm thick as in ceiling, fixed with screws on GI grid frame work of size 600mm x 600mm, GI T-section of size 25mm x 25mm x 1.25mm, GI L-section 25mm x 25mm x 1.25mm, hanging arrangements with roof with GI wire not less than 4.00mm dia, including applying two coats of distemper oil emulsion (of approve shade) after preparation of surface, including taking down existing ceiling board of any description as per manufactures instructions , complete all as specified and directed by Engineer-in-Charge.
Taking down cement plaster on Brick or concrete surfaces including raking out joints hacking for key scrubbing down with water etc complete all as specified and directed.
M&L for rendering 5 mm thick in CM 1:3 on concrete surfaces on ceiling / facia /RCC Chhaja etc & finished even & smooth without using extra cement complete all as specified and directed.
M&L for rendering 10mm thick in CM 1:6 on fair faces of brick work or concrete surfaces and finished even and smooth without using extra cement complete all as specified and directed.
M&L for rendering 15mm thick in CM 1:4 on fair faces of brick work or concrete surfaces and finished even and smooth without using extra cement complete all as specified and directed.
M&L for preparation of new plastered surfaces and applying two coats of exterior acrylic emulsion (weather proof treatment), in camouflaging patterns complete all as specified and directed.
M&L for preparation of old surfaces and applying two coats of exterior acrylic emulsion (weather proof treatment), in camouflaging patterns , like brooming down or steel wire brushing scraping down smoke soot, moulds mass and efflorescent salt and trading oil and greasy spots complete all as specified and directed.
M&L for preparation of newely plastered ceiling surfaces and applying three coats of white washing complete all as specified and directed.
M&L for complete removal of existing treament through mechanical scraper machine for any type of existing surface of walls/ceiling Complete all as specified and directed.
M&L for 1.5mm thick birla/JK wall care putty to receive smooth finishes complete all as specified and directed.
M&L for painting of treated surfaces to receive two coat of dry distemper on surfaces of walls and ceiling complete all as specified and directed.
M&L for preparation of old decorated surfaces and applying one coat of synthetic enamel paint on plastered surfaces of walls/kerb stone etc complete all as specified and directed.
M&L for preparation of old steel surfaces exc 10cm width or girth and applying one coat of synthetic enamel paint of approved tint complete all as specified and directed.
All as per ser item No. 93.00 here in before but on wooden surfaces, complete all as specified and directed.
M&L for 12 mm thick suspended Gypsum cove and coffered false ceiling .600mm wide (as in ceiling/lining fixed with counter sunk screws on & including GI channels frame work of standard section as per manufacturers instruction , fixed @ 1.2m in one direction and 45cm in C/C in other direction with necessary fixing arrangement at their junction point at desired heights below roof slab and including two coats of plastic emulsion paint over a coat of primer on exposed surfaces, the frame work shall be fixed with the help of GI suspenders of suitable size with the help dash fasteners and along wall, making good disturbed surfaces smoothening the gypsum board, POP lining at joints panning as required complete all as specified and as directed including dismantling and removing of existing false ceiling, complete all as specified and directed.
M&L for providing laminated wooden panelling as per approved sample 8mm thick, size of panel 1214mm x 142mm with intelocking panels, Hi gloss PU polished surface of french bleed designs with weather shield max and V groove on all four sides including dismantling of existing panelling of any description complete all as specified and directed.
S&F for stainless steel door lock, glass to glass type , suitable for 12mm thick frameless toughned glass door with and including all fixing accessories i.e bolt washer, screw adhesive etc of suitable size, complete all as specified and directed.
S&F in repair toughened glass frameless partition (area of single partition upto10sqm) with fixed portion of 12mm thick glass including cutting holes edges rounded and etching works etc and all kind of SS patch fitting & fixture spinder patch etc complete all as specified and directed.
Contract Amount shall be derived after affecting the amount of Schedule of Credit in General Summary on serial page No 17 of tender documents.
M/s JUGAL KISHORE MISHRA AND SONS
stage.html
html • 0.04 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .